on the cartridge and toner double

Similar Questions

• How can I disable all the pings and tones and notes and sounds of the HP Officejetpro 8610?

  I can't tolerate the noise.  How can I disable all the pings and tones and notes and sounds of the HP Officejetpro 8610?  This 'thing' emits a beep and the pings and plays music.

  Thank you

  Sam

  Hi Sam,

  On the front panel of the printer, scrool main screen to the right and the clock setting icon.

  Then click Printer Setup, and then select sound effects Volume.

  Select and confirm, that should disable all these sounds.

  Shlomi

• HP Deskjet 3070 has replaced the cartridges and still not printing

  My printer says I need to use the cartridges Set UP with my printer which is impossible because my printer is 20 months old. I had no problem with any kind of impression e-print etc. until now, I had to replace my cartridges. I bought HP364 and I tried and cleaned my printer but it is not printed. Sometimes he tells me Magenta compatible is 2 days later it say Cyan was not compatible.  Please can you help me

  Thank you so much Ciara. Problem solved you are a wonder!

• Photosmart 7520: my photosmart HP 7520 do not print: I replaced all the cartridges and always use HP ink cartridges

  My 7520 gives me a message that says: "there is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. »

  It was printing fine, but then it looked like it was getting low on ink. Black began to turn gray and striated. I replaced all ink cartridges. NOTE: I ALWAYS use cartridges HP, new out of the box. I followed your instructions step by step on the site, but it seems to be moot, since I tried everything. I will be so angry if I spent $ 70 on new HP to put in this printer ink and she took a dive. Please suggest solutions. I really should get this impression, am on a deadline.

  I work with a MAC OSX El Capitan system

  Hello

  I suggest remove you the printer cartridges

  Turn on the printer without cartridge. It should start and see the lack of ink.

  now, first install black and see another error.

  If this isn't the case, restart the printer and do the same for the rest of the inks

  She solves the problem or help to identify the defective

  It may be useful

• OfficeJet Pro 8600: Help: I changed the cartridges and they are locked (JO 6800)

  I had a few problems print quality with my OfficeJet Pro 8600 and I changed the ink cartridges (950/951XL). Unfortunately, the problems are remained so, instead of buying a new printer head, I bought a new printer: a 6015 OfficeJet at Staples. First of all, I had to install the set up of the cartridges but pass them the old printer, which I had already brought to the depot of garbage to new XL versions. And guess what? The cartridges were locked! Now, I have to remove the locks in the old broken printer (what is left) or I can throw them-which is a shame because I bought the new 8615 especaially because it uses the same (expensive) XL cartridges. Please HP: help me. A loyal customer.

  Any cartridge that is installed in your Officejet Pro 8600 would not be usable in another printer, including a different of Officejet Pro 8600 8600 Pro Officejet "cartridge protection" was defined.  This cannot be reset, even in the original printer.  Turning off the cartridge of the printer's built-in web server protection will not affect future cartridges installed in the machine.

  Given the circumstances, I suggest call HP and ask if they can help to.  If they decline please post here and I'll see if I can help with a different approach.

  You can disable the protection of the cartridge in your Pro Officejet 8615 for the future.

• HOW TO PRINT THE FRONT AND BACK (DOUBLE-SIDED)?

  How can I print on the front and back? Help, please!

  Hello

  It depends on the software and the printer you are using.

  Probably best to check with the manufacturer for these two and the specific forums Support.

  If it's in a program Office control with the Experts of the Office here: (re - ask your question in the appropriate groups)

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Discussions in the Office Setup program
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.Setup&lang=en&CR=us
  Or

  Welcome to Microsoft Discussion groups
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?GUID=1A61081E-1F66-5F7F-B5BA-04767E55A63B

  Microsoft.public.office.setup discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  Printer manufacturer you will also Support, documentation online and possibly forums for help.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• HP Officejet 6500 E709n Series (replaced all the cartridges and the printer does not print in color).

  
  

  The upper part and let the carriage to move to the Center or the left, unplug the printer, remove the ink cart. poser pose on the side, hands gray and remove the printhead with a lint or a coffee filter, hormonaly moisten her and essuyer wipe down the contacts at the back of the print head, wipe were also the printhead sits in the printer, reinstall the print head and ink cart., close the cover, don't hold the #3 on the front of the printer and the plug the unit back in When you download release power the #3 and see if that helps the issue.

• SE message which, due to the security I have to save the citrix .ica file to the location on the computer, and then double-click it to open.

  I just put on my computer citrix.  I need to work, I get all my apps to work through it.  When I try to open one of the citrix apps is telling me to save it to my computer, then double-click it to open it because of my security settings.  I tried and it won't do anything, that it gives me just the option for approximately 10 seconds for first save and then closes this window.  I can't work if I can't get these apps to open HELP for me!  Thank you.

  Go to the following site to see if you can download the customer Citirix Metaframe. I think that your problem should be solved. http://www.Citrix.com/English/SS/downloads/index.asp

  You should be able to open your applications after you have downloaded this, let me know if this solves your problem. If this is not the case, will do a research still further for you.

• HP 3050 printer prints not clearly even after replacing the color and black cartridges...

  I have a problem on a HP 3050 printer all-in-one that is just a year old.  The printer is not used for several months and it was working properly before.  I tried to print a page and had missing horizontal print, I tried to clean the print heads and it did not help.  I replaced the cartridges with new ones and noticed that the ink levels showed that had the old cartridges.  Black was half full and the color was full.  It wasn't new purchased in-store cartridges refills.

  I tried to force an alignment page on the maintenance of the printer screen and this failed repeatedly, undetected alignment page.  I did some research and even tried to clean links them / connectors than cartridges fits.  Looks like that leaving the cartridges for several months in the printer was bad and that I'll need to ge a new printer.

  Thanks for the tips,

  plarr

  document here can help to solve the problems of print quality in your Deskjet 3050 has. I also suggest to clean the cartridge and printer electrical contacts as described in this document (for another series of cartridges, but same principle).

• OfficeJet 6310 tricolor cartridge (93/95) stops working after replacing the cartridge of black and white (92)

  OfficeJet 6310.  Brand new problem.  This morning my 92 black (right) went dry and as soon as I replaced it the printer said my tricolor is bad.  With the 95 the printer now shows "left cartridge needs to be replaced" and with the 93 the printer now shows "cartridge not intended for this printer."  There is no point at all.  Restarting, cleaning the contacts and heads, nothing seems to work. The cartridges are HP OEM fresh out of the blister, no refills.  I used the 93 both cartridges lights 95 alongside 92 black for a few years.  Foreigners have infected my printer.  Anyone have any ideas?  Someone two days ago posted basically the same problem with their so 5740 printer.

  Message edited by Frustration1029 on 12/09/2009 07:48

  1. remove all the cartridges and turn the printer off

  2 unplug the printer and wait a minute

  3 press and hold the # and 9 while plugging in the power cord from back in.

  4. wait a few seconds, and then press the power button.

  5. the display should read 'Full Reset to Null'

  6 only install the color cartridge.  Close the cover

  7. wait for the machine to ask for black cartridge, then open the cover and install black cartridge.

  8. close the lid

  9 alignment page be printed automatically.

• I just replaced the black cartridge on my HP Officejet 6310 printer and get a message that I need to replace the cartridge. What is the problem?

  Officejet 6310 printer will not print.

  Again - the cartridge and DATED?  Did you remove all plastic covering the nozzle before insert?  Have you read in the Quick Installation Guide that you have when you first set up the printer?

  If still no joy and it's a genuine HP cartridge, contact HP and get them to replace it.

• Printer hp deskjet k209a shows E and does not recognize the cartridge

  My printer k209a installed on windows 7 shows E and it can not display ink estimated even me, I uninstalled and reinstalled everything, this printer worked correctly the last time. It's very frustrating. I have travelled an answer anywhere and have done everything I could, he cannot help. My printer can scan, but may not copy or print. But I do not know why, when I pressed the button ON / OFF and the button cancel all, my printer can recognize the cartridge and show the estimated ink and showing also don't not E more... but only a few seconds after it prints the test print, then it becomes E again. Please help me.

  The troubleshooting steps described in this document may help to resolve the cartridge error.

• My cursor jumps to the right and cannot use it for games. Have the Toshiba laptop and Windows Vista Edition using Home Premium pack 2

  my jumps to cursor to the right of the page and will move for me when you play as Bejewelled. Have laptop Toshiba and use Windows Vista Premium Pack 2.

  Hello
  You did recently change?
  It is while you use other applications?
   
  I suggest that you update touchpad and display drivers for the cards and check.
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the touchpad, and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.
  4. now Locate Display Adapter and then double-click the device name.
  5. click Driver tab, then click on set to update driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  You can also change the touchpad settings and check.
  To do this:
  1. click on start
  2. click on Control Panel
  3. Select mouse and then check the settings
   
   
  Thank you, and in what concerns:
  Swati Keni-Microsoft Support

• Photosmart 7520 dose not recognize one ink installation cartridges and wont let me continue

  Printer new out of the box. Trying to install, but the printer says there seems to be a missing cartridge. I removed the cartridge and reset several times with the same results.

  Hi tvanloo,

  There are several possible causes for this problem. Please see the following link for more information on how to solve the problem:

  http://goo.GL/fWWeK

• Office Jet 6500 E710n-z will not print black even just replace the cartridge with a new one.

  This is the 3rd time having problems on "black" even printing ink isn't empty (but the level is low, like a quarter left).  In the previous cases, I replaced the cartridge and the problem resolved.

  The 2nd time was last week.  After I changed the cartridge, it worked (for only 1 week) and the problem is back.  As the ink is full this time and it worked fine when I just changed it, I suspect it is the problem of my printer instead of the cartridge.

  I did clean the print head and align the print heads, but the problem persists.  Please advice solution.  Thank you!

  I hope that the printhead has no need replace. I would like to look at this document on faulty production for your printer model.  I know some steps here mentioned you already make. Please just read / ignore those and try the ones you have not yet completed.  It presents various ways to clean the print head; If you have just done the cleaning of the box tools, I'd defiantly that manual. It also has a ride to make sure that the product firmware is up-to-date.  Here is the link: http://support.hp.com/us-en/document/c02455482

  I hope this helps.