Printer hp deskjet k209a shows E and does not recognize the cartridge
My printer k209a installed on windows 7 shows E and it can not display ink estimated even me, I uninstalled and reinstalled everything, this printer worked correctly the last time. It's very frustrating. I have travelled an answer anywhere and have done everything I could, he cannot help. My printer can scan, but may not copy or print. But I do not know why, when I pressed the button ON / OFF and the button cancel all, my printer can recognize the cartridge and show the estimated ink and showing also don't not E more... but only a few seconds after it prints the test print, then it becomes E again. Please help me.
The troubleshooting steps described in this document may help to resolve the cartridge error.
Tags: HP Printers
Similar Questions
-
Can not connect. He does not recognize her fingerprints and does not recognize the password
Original title: cannot open a session
my friend cannot connect to his pc. For some reason it does not recognize fingerprints and then when he tries to connect manually using his password, it says it does not recognize the password, even though he knows that it is correct. Does anyone know why this is and how to solve?
Hi Knightofkent,
You can read the article and check if it helps.
What to do if you forget your Windows password
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password
In addition, technical support engineers Microsoft cannot help you recover passwords files and Microsoft who are lost or forgotten product features.
Microsoft's strategy concerning lost or forgotten passwords
http://support.Microsoft.com/kb/189126
I hope this helps.
-
My computer has not worked since I stopped him during an automatic update. Which I have been kicking myself since then, but the last time that he updated, he beat the computer and I panicked.
Anyway, it won't run certain programs, including iTunes and a large part of MS Office, and no matter how many times I try to reinstall, they still do not work, saying: "side by side configuration is incorrect."
What I want is to restore it to factory settings - all my data is secured and sustained upward. But when I put in my recovery disks (and they are the highest boot priority in the BIOS) the system takes care of the hard drive as usual. When I remove the ability to boot from the hard drive, my system no reserves at all, telling me to restart or insert a suitable disc. And when I boot from the disk and try to run it manually, by clicking ETFSBOOT, it tells me that "the version of this file is not this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program. »
I have double and triple checked this - my system is 64-bit. My records are 64-bit. As far as I know, the computer got garbled during the automatic update and now part of it think it's 32-bit (some programs are divided into sections 32-bit and 64-bit). All I want to do is to reinstall windows, but I don't know what to do because it does not recognize my discs! Any suggestions, internet?
Thank you very much.
In addition, if it is relevant, I'm Windows Vista on an ASUS K50IJ laptop. I do not have the windows install disc because the computer was shipped with windows installed, but I have the recovery disc ASUS (which have been used to restore my computer in the past).
Hello
Since you are unable to open programs like iTunes or Office, you can try to perform the system restore and check if it helps.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
To run the system restore, you can consult the following link:
About the factory restore the question, you need to contact ASUS support for additional help on ASUS recovery disks.
-
HP 1012 printer won't ADD. Windows Vista does not recognize the printer or port.
Windows does not add 1012 HP printer.
Although compatible with Vista: http://www.microsoft.com/windows/compatibility/windows-vista/Details.aspx?type=Hardware&p=LaserJet%201012%2015ppm%20600x600dpi%208MB%20USB&v=HP&uid=Q2461AABA&pf=0&pi=0&s=HP%20Printer%201012&os=32-bit, a free download is required (whatever that means - read the above yourself). This is perhaps why you cannot install. While on the HP site, get the most up-to-date drivers, firmware or software for this printer and use it for installation (which came on the drive or what you perhaps obsolete).
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
HP Officejet Pro 8600: Upgrade to Windows 10 and does not recognize the printer scan function
What should I do to get my scanner to work with Windows 10?
Hello
Re-install or update software and driver help. But what is your HP Officejet Pro 8600? HP Officejet Pro 8600 - N911, it must be* where * can be from a to z.
Kind regards.
-
Rel 24.6.0, Windows 8.1 TB
https://wiki.Mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #McAfee
-
B109n-z does not recognize the cartridges after printin
I'm so tired before HP printers I throw my HP printer 5th in the tray
Please help someone
I have new cartridges in x 4 (yet once ripped of for ink, by fluid once more dear than gold)
My daughter has print his work for the College, will set printer to print an another doc
then said all return my cartridges are missing or defective, I need that document for the morning, I put in another 4 cartridges same message I cleaned the contacts carefully re cartridges
same message, really at my wits end with this printer
I tried
cleaning the contacts
new cartridges
pulling on the power cord so that the power on button 3 times, making 3 of 4 cartridges it out then seen only one cartridge
any help please
solved
-
I moved my printer in Mexico City, HP Officejet 4635. It uses #61 cartridges. I was told that the 61 in the United States is the same as the #122 to the Mexico. However, the printer say it does not recognize the cartridge.
Can someone give me some advice?
Hi artist1234,
Welcome to the HP Forums.
Why the printer does not is because the unit is not regionalized for this part of the country.
To get the printer to work, you will need to contact HP Total Care so that a representative from HP can regionalize the printer for you.
If you call in North America, the number is 1-800-474-6836. Seeing that you are in Mexico, please click here to access the information page you need.
Thanks for your time.
See you soon,.
-
HP Officejet Pro 8610: HP Officejet Pro 8610 does not recognize ink cartridges
My printer has ceased to recognize its ink cartridges. In a first stage, the problem happened occasionally and could be fixed by installing and reinstalling the cartridges or just wait a few days, but now it is continuous.
When I turn on the printer, it immediately gives me an error (without code), saying that it cannot find the cartridges. All four are marked on the screen as not found. I followed the instructions of troubleshooting here: http://support.hp.com/us-en/document/c04090902
The cartridges are genuine, they are the ones that came with the printer. I removed the, checked the contacts of the four. They look damaged or dirty, but used a cloth to clean all anyway. Put back them, did not help. Checked the latch, it was in the correct position. I even tried the restart without result.
I tried to replace the cartridge with a new one (again, product HP genuine), but does not replace the printer either. And because all cartridges have failed at the same time, I can hardly belive the problem lies in them.
I come from Finland, and I've not found a phone number, I could ask for help. Does one exist even for my country?
Hey @Leathert,
Welcome to the Forums of HP Support! I hope you enjoy your stay here.
I see that your Officejet Pro 8610 e-all-in-one printer does not recognize the cartridges. I could help you with that, but it seems that you have already found the HP document that will guide you in troubleshooting. Instead, you can contact HP (in Finland) support by clicking this link.
I hope you get your sorted question and I hope you have a great weekend!
If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.
If you appreciate my help so please let others know by clicking on the icon below my post thumbs up. -
XPS 730 x company vista plug-and-play does not recognize the dell aio 962 printer
XPS 730 x company vista plug-and-play does not recognize the dell aio 962 printer
It is usually best to install the drivers before connecting the printer. Use the printer installation disk, if you have one, or follow the procedure here:
-
My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)
My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)
When did this problem start? What did you change shortly before it all began?
Please quote the exact text of the message you get, verbatim.
-
Product: HP deskjet 4622 All In One
operating system: Windows 7
Software used: Quicken Starter Edition 2011
My printer refuses a single cheque due to the size of the paper being not recognized by the printer. The actual size of the individual audit is 8 1/2 inch wide and 5 1/4 inch from top. There is no size in the settings of the default paper size that matches the paper size... The quicken software print 1, 2 or 3 controls on a sheet so if I print 2 verifies that leavesme with a single cheque that is wasted because my printer does not recognize the size. My previous HP printer did not have this problem.
Someone at - it suggestions?
xgdude, unfortunately this printer does not support true custom paper sizes, he acknowledged instead the paper types that are commonly used in the United States. This is because the non-traditional types of paper are difficult for the printer to recognize and inside the right margin of the printing error.
I hope this information is useful!
-
Put HP1012 in place. The installation process does not recognize the printer.
I've made sure the device is on and the usb cable is connected. Printer worked fine until I needed to reinstall the windows xp operating system. Now reinstall the printer set up the software does not recognize the printer. Before reinstalling the operating system, the printer worked great even if it is quite old. I use the original CD game in the installation process.
Problem solved. I plugged the printer into different usb port cable and the computer immediately recognized the printer. Previously, I had ports different usb, but not the one where he worked. I have 7 usb ports on this computer, and it seems that one does not work.
-
recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution
Please visit http://www.microsoft.com/genuine/ and click the Validate Windows button, then restart your computer.
If you were not able to validate, follow these steps:
1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062
1B. double-click the executable file to run the tool.
2. after running the tool, click the Windows tab, and then click copy in the Clipboard.
NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.
3 start a new thread in the following forum and paste the results of the WGA diagnostic data in a post detailing the problem: http://social.microsoft.com/Forums/en-US/genuinewindowsxp/threads
4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
HP Solution Center does not recognize the network printer
Network has a hp 309 a printer, can print from the computer, the problem is:
HP Solution Center not load-says incomplete installation. If I plug in the USB cable and let it continue, it sets up a second printer that only works on the USB cable and it still does not recognize the network printer.
Question how can I get the Hp solution program to reward the network printer. If I reload the CD, then reinstall the will other people on the network of the problems?
Resettlement on your machine won't affect only you, no other machines on the network.
Maybe you are looking for
-
Toshiba 19DV615Y: 12V battery - how many amperes / hour would be used?
REF TV / DVD 19DV615Y - when on the campsite using a 12 volt battery, how many amperes / hour would be used.Info sought to assess the size of the required inverter.
-
How to remove a large file, belonging to the AppStore
I found a 4.4 GB file on my MBP. It is located at /private/var/folders/dd/vwx7zz_d2m9g70cwxb_p5n9w0000gp/C/com.apple.appstore/497 799835/zyk4624423266348316897.pkg. How do I remove all?
-
While watching clips on facebook or u tube it freezes or is slow to start
When I watch the video on face book or u tube it freezes and is slow to start. I downloaded the latest version of the flash player, but it's always the same
-
Typos, letters ignored as I tye
I took the New York computer to Geek Squad. The problem does not occur in the store, but as soon as I got home, the same problem arises.
-
Windows 7 says my copy is illegal, but it is not.
I bought the CD of W7 Ultimate and download it from the Microsoft site. When I reinstalled my computer with a new hard drive, I installed W7 and activated the option "Automatically record online" (or something like that, I'm not sure of the exact wor