on the special ports?

Similar Questions

• Satellite L650 - no signal on TV via the HDMI port

  Hello

  I have a problem with the HDMI port. I am not able to connect the L650 to my TV. There will be no incoming television signal. The TV port is correct because I can connect my digital camera without any problems. The HDMI port is not displayed in the hardware Manager. I don't use the version of windows 7 that has been installed originally. I formatted the disk and have reinstalled a different version of windows.

  Do I need a special driver to activate the HDMI port? I just installed the ATI catalyst driver. If you would like more information, I'll try to give them as soon as possible.

  Thank you very much for your help

  Hi song2.

  > have reinstalled a different version of windows.
  And what version of Windows you have right now?
  You have yellow exclamation points in the Manager of devices or unknown devices?

  In general there is no driver special HDMI port. If you connect your laptop to TV/monitor external, you must press the FN + F5 key combination to switch between monitors.

  Check it!

• iPhone 7 will not play audio via the USB port on the car.

  When I plug my iPhone USB port 7 more in my car (15 Jeep Grand Cherokee), the artist/song/podcast information appears on the screen, but the sound plays through the speakers of the phone.  I have confirmed that my settings are all the same as they were on my 6s, who played without any problems via the USB connection.  Bluetooth streaming works fine - no problems at all.  Any ideas, or is this a problem similar to that people have with CarPlay?

  Welcome to Apple Support communities, kevo.mac!

  Congratulations on your new iPhone 7 more! I see that you connect with your Jeep Grand Cherokee using the USB port. Everything seems to work fine, except that the music plays through the phone instead. I'll be happy to help you to get this working.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  If you are using USB playback

  Restart your iOS device and your car.
  Connect your iOS device to another stereo USB port (if you have one).
  Try another USB cable.
  Update your iOS device.
  Install the updates to the firmware of your car radio.
  Test of audio playback from a different application. If you can not play audio from a specific third party application, contact the developer of the app for help.
  If you can not play audio from an app Apple, contact Apple technical support.

  Enjoy your weekend!

• Thunderbolt Display 27-inch TV using the HDMI port Minidisplay

  My setup is macbook air, Thunderbolt Display, 55 inch TV.

  Wanted to know if I plug Thunderbolt display on TV through HDMI Adapter Mini DisplayPort / (Thunderbolt), it will be able to display of Macbook Air, Thunderbolt display and TV even time?

  Thank you.

  The Thunderbolt ports and displays: frequently asked questions (FAQ) - Apple Support

  An alternative would be to buy an Apple TV, then use AirPlay on your Mac to stream content both Thunderbolt display, Mac and TV, but the TV must be HDTV.

• I cannot set the outgoing port Thunderbird 38.0.1.

  Thunderbird 38.0.1 does not allow me to set the outgoing port, parameters of account or in the Assistant accounts again. To be able to do was my only reason for considering change of Qualcomm Eudora. This flexibility is apparently available in earlier versions. It is now a feature requiring the paid version?

  Thunderbird is not free so no idea what you are talking about a paid version.

  The menu bar, select Tools - Account Settings

  At the bottom of the account from the list on the left side is Server outgoing (SMTP)
  As the name suggests, you configure the outgoing server there.

  No menu bar tools showing? Press the ALT key.

• Which side is the usb port 3 on a 2015 macbook pro with the retina display?

  Which side is the usb port 3 on a 2015 macbook pro with the retina display?

  I found the answer. It's the left side near the microphone.

• Using the Ethernet Port on a remote Express

  I have just moved into a new House and has Verizon FiOS installed.  Verizon provided a router modem combination like my main wireless service.

  I have an IP phone that I need to use in my office located in another room and the Verizon tech said that it would be very expensive to run a separate line in this room.

  I have a generation current Airport Express.  I would like to use the Express to join/expand the wireless network in the office, but my question is, the LAN on the Express port will be active so that I can connect the IP phone to the LAN port and use the phone via wireless Express?

  If possible, can you give us some guidance on how to configure the Express?

  Thank you

  David

  I would use the Express to join the network wireless Office

  The AirPort Express, expected to be able to 'join' the wireless network that is provided by the modem/FIOS router, assuming that the device uses wireless standard... parameters and... He Express is located where it can receive a strong signal of the FIOS router/modem wireless.

  But, the Express can not "extend" or "repetition" of the FIOS wireless network, given that "expand" function requires the Express receive a wireless signal from another Apple wireless router.

  .. .my question is, the LAN on the Express port will be active so that I can connect the IP phone to the LAN port and use the phone via wireless Express?

  Yes.  In fact, you can use the LAN or WAN port, or both at the same time... because both ports behave as LAN ports when the AirPort Express "joins" a wireless network.

  can you give us some guidance on how to configure the Express?

  What camera... Mac, PC, iPhone / iPad... will you use for this?  What operating system is that it uses?

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• Open the TCP Port

  I'm trying to implement a TCP port to listen to music on my home network through JRiver. The server and work remotely on my home network. But I want to access on the network side.

  I use ATT Uverse to access the internet. I disabled wireless and ATT modem to transmit to my Airport Extreme.

  I have these instructions to configure the port:

  1. Open AirPort Utility and change your AirPort Extreme or AirPort Express. Select the tab network (image). Select the sign of closer Port settings box. The Type of Firewall entry should be IPv4 Port Mapping. Enter a description like JRiver Media Center. Enter the Public 52199 TCP Port. Enter the private IP address, it's the IP address of your JRiver Media Center PC at home. Enter the TCP Port private 52199. Click on save, and then click Update. (image)

  When coming to this page, however, the firewall main entry box Type "IPv6" entered and grayed out, so it cannot be changed.

  Any help would be greatly appreciated.

  Sorry, but no image is available.

  However, to start, running the AirPort Utility > select the AirPort Extreme > change > Internet tab > Internet Options...

  What is the value to configure IPv6? If it is 'Automatically', change it to "Link-local." only (Note: I'm assuming that your ISP DO provide you IPv6 service still.)

• Is it possible to implement the special keys to a program name

  Canned commands

  Is it possible to implement the special keys to program a name & address, etc.?

  In addition, if there is a low-cost program that does the same thing please let me know.

  Thank you

  Damon

  Settings - general - keyboard - replacing text

  It works for your needs?

• HP laptop - 15-f233wm: external monitor connected to the HDMI port has video but NO sound

  If I connect an external monitor to the HDMI port and check my audio device on the right on the screen cone winder it displays 2 only) 1 HP and Intel) 2 Audio display speakers and No HDMI option selection.

  Ernie4576 wrote:
  

  If I connect an external monitor to the HDMI port and check my audio device on the right on the screen cone winder it displays 2 only) 1 HP and Intel) 2 Audio display speakers and No HDMI option selection.

  By adopting the option monitor MHDI PC/AV Pc mode will solve the problem, I use a unit screen color Samsung TYPE model / MODEL: C27F591FD (N).

  The device playback option on the care of the portable property are all set to default, Intel C27f591 display sound card works fine!

• How to extend the network and using the Ethernet port to connect an older computer without wifi capability

  I have a wireless network with my Time Capsule, but also I have an old computer without wifi capability. Is it possible to share the connection to this computer that connects an airport express (model A1264) to extend it and the computer thought that the ethernet port on the Airport express?

  Thank you.

  Yes

• How to change the infrared port on Satellite M30 to be IrDA to be direct IR?

  Hello world

  I just bought a new watch that should be able to communicate with a pc via the infrared port (it's the Polar S710).
  Unfortunately, it does not work as the 'Protocol' of the watch is directIR, rather than be IrDA, as is my cell phone.

  I saw somewhere that it would be possible to change the infrared port of my laptop in order to operate in directIR. Anyone know the procedure? I think I could change something directly in the driver, but I did not how to deal with.

  I would be very grateful if someone could help me.

  Thank you
  SEB

  Hello

  I think that it of not possible to change the IrDA Protocol on the laptop.
  But have you tried to update the software polar?
  Consult the manufacturing site:
  http://support.polar.fi/PKBSupport.nsf/library?OpenForm

  If this does not help I think that only and an external solution as USB-> DirectIR dongle help

• Using the Serial Port on the HP 50 g graphic calculator

  Hello world

  I have another question. I want to use the Serial Port on the HP 50 g to connect with another device. The device is called the MFJ-1214PC. What it does is to accept the text and commands through a 9-pin serial Port and converts the text in a Code Morse/RTTY sound audible. It also decodes Audible the Morse Code and RTTY radio signals and displays them as text on your computer. The program that controls the MFJ-1214PC was originally written for an IBM PC for the MS-DOS operating system. The HP 50 g graphic calculator meets the system requirements for the simplest version of the program. I was wondering if there is an MS-DOS emulator written for the HP 50 g, which would allow the HP 50 g to become the computer in this case, or if the program could be rewritten and brought to the HP 50 g. If it could be rewritten, programming language what do you think would be better suited to this type of application (if it is even possible?) or UserRPL, SystemRPL or Assembly. Don't forget that I'm a complete newbie with the HP50g and have never programmed with it yet. I'll include the manual of the MFJ-1214 PC as an attachment so that you won't have to look for him. Thank you in advance for your help!

  ~ Zekelegge ~.

  I understand (from my brief overview) out of the box-MFJ-1214PC, this offer box decoder output series computer.  The computer (50g in your case) will have the software to read message series and then convert that to an output for display.

  BartDb gave you the right answer.

  A serial cable with the correct speed level and reversing lever to manage as well as the 50G has a RS-232 signal to the outside world is the ideal solution.

  However, make sure that the output of the decoder box series package can be understood by the 50 g. aud, bits, etc.   (you have the set-top box manual, so you'll have to look that up)

  the streamsmart is not an aggregator of serial port.

  in other words, these connectors DIN of Qty 4 on the front do not accept series rs-232 input and send then to 50 G.

  I'm not an expert, streamsmart more info on these boxes is rare to find.  The probes are even more rare.

  However, I know that the 4 connectors are for the analog-to-digital conversion in the probes.  The streamsmart works as a "data logger" in which he sees the input probe, the A/D converted, then sends it to the 50G (or a computer via the USB port).

  In addition to the solution of Bart, there was another named Tiwag forum poster who created a serial cable and displayed a schematic representation of the cable.  This information can be found here:

  https://groups.Google.com/Forum/?fromgroups#! searchIn/comp.sys.HP48/serial$20port/comp.sys.HP48/ltcane1jSOw/uHyw2Ti03kgJ

  to see an example of programming to use the serial port of 50G, you can reference the following hpcalc GPS data collection program.

  http://www.HPCalc.org/details.php?id=7105

  It is written in userrpl so can be crossed with the reference of users advanced for the translation of the syntax.

  It seems that the main routine of concern for the comm to the gps is in the file "GPS >.

• The WAN Port is communicating with the Ethernet switch?

  I have a Comcast gateway that the router is disabled in so it acts only as a modem. This is related to an Airport Extreme, which serves as my router via the WAN on the AE port. I created a different WAP with a Capsule temporal from the airport, located downstairs with an Ethernet cable from one of the Ethernet ports on the AE to the WAN on the TC port. I think it's what we call a 'roaming network.

  My question is, can I connect my switch Gigabit 8 ports in one of the Ethernet ports on the TC to complete connections wired to all devices connected on it, or should I first connect EI to the switch 8 ports and then connect the switch to the port WAN TC to complete my network "roaming"? In other words, plug it into the port WAN AE or TC still allows you to use other Ethernet ports as a switch?

  Thank you!

  can I plug my Gigabit 8 ports switch in one of the ports Ethernet on the TC to complete wired connections to all devices connected on it

  Yes, assuming that the TC has been configured to run in Bridge Mode, which would be normal.

  or should I first connect EI to the switch 8 ports and then connect the switch to the TC WAN port to complete my network "roaming"?

  It would be considered preferable to wiring, if it is convenient to do so.  For example, in the configuration of the wiring in the previous example just above... If there is a problem with the time Capsule, then all devices connected to the switch to the time Capsule would have a problem as well.

  If the switch is connected to the AirPort Extreme, and the TC is then connected to the switch... If the TC has a problem, the other devices connected to the switch of will not be affected.