On the Test computer system state restore

Similar Questions

• On the system restore running the message says "system not restored" and error 0 x 80070005 is given - how to solve this problem & get sys restore running again?

  Original title: on the restoration of the system running the message says "system not restored" and error 0x80070005 is given - how to fix & get sys restore running again?

  A ran the system restore, it goes through the entire process, then said "System Restore does not restore the" files etc, nothing has been changed.

  Error 0 x 80070005
  All + ve help would be appreciated

  Hi Rodianna,

  I know you've tried some of these steps... but try this exactly showing how. First one marked 'reply' then the following below this one.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-7-system-restore-error-code-0x80070005/11c3f465-559d-4F35-B8B7-9bc010972247

  Let me know what happens.

  B Eddie

• HOW TO COMPLETELY CLEAR COMPUTER SYSTEM NOT RESTORE

  I NEED TO KNOW HOW TO MAKE MY COMPUTER AS IF IT WAS WHEN I BOUGHT IT. IT'S NOT THE SYSTEM RESTORE FEATURE I WANT IT LIKE THE DAY I TOOK IT OUT OF THE BOX

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system is restored.

  My laptop is preinstalled with Windows 7 Home Basic.  At the free launch Windows 10 I downloaded the same and after 2 months, the hard drive crashed.  The repair shop trying to fix formatting, but could not revive.  This is why I bought a new hard drive and repair charge shot Windows 7 Ultimate edition.

  Now, I want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system has been restored.  When I posted the question about how to solve this problem, I was told to try the download by way of USB/ISO file.

  Now my question is that

  one) can I reload Windows 7 Home basic as I have the product key?

  (b) I can then download Windows 10 according to the normal procedure?

  I'm not tech savvy, afraid to download files in USB and then load into the laptop, so this question.

  Concerning

  S Subramanian

  Original title: Windows 7 Home basic

  You can directly download Windows 10. Windows 7 complete edition currently installed is not genuine.

  When you upgraded from a previous version of Windows, what happened is that (your PC) hardware will get a digital right, a unique signature of the computer which is stored on the Microsoft Activation servers. The real Windows 7 or Windows 8 license you were using previously will be exchanged with a key to the diagnosis.

  Whenever you need to reinstall Windows 10 on this machine, go just to reinstall Windows 10. It automatically reactivates.

  Therefore, there is no need to know or get a product key, if you must reinstall Windows 10, you can use your Windows 7 or Windows 8 product key or use the reset function in Windows 10.

  Step 1: How to download official Windows 10 ISO files

  Step 2: how: perform a clean installation of Windows 10

• How to get rid of the microsoft computer system Defender

  How to remove the microsoft system defender at the stupid computer address that he insist you buy. If you don't buy, it's just pop up every minute that you can't work on the computer at all. I had used the "remove software" to remove the defender system microsoft and restart but it come back causing tons of nuisance.

  PLSE help kindly

  His rogue software / fake. It is not made by MS. Try the steps here

• The PXI-8195 system state: not configured

  Dear community,

  at startup time real pc pxi 1042 with a Don t of controller pxi-8195 RT-model start. The display shows the following message is displayed:

  (the doesn´t of pc have an operating system because it is used only for the RT model)

  Transfer of control of user program.

  LabVIEW RT Boot Loader

  (C) copyright 2002-2005 National Instruments Corporation

  LabVIEW time real Single-Core Kernel

  MAX system identification name: not specified

  The initialization of the network...

  Device 1 - MAC address: xx - 0.0.0.0 (primary)

  System status: not configured

  I hope that someone of you can help me

  Hello

  First of all, welcome to the Forum OR!

  You can find a detailed guide of your PXI system with your real-time system configuration here:

  Initial setup of the PXI real-time and install the http://www.ni.com/white-paper/12871/en/ software system

  This screen your see is just a console that returns events on the pxi system. In your case, it indicates your pxi is not configured.

  You cannot create events of keyboard and mouse on a system in real-time because it would mean that your system is not more deterministic.

  For this purpose all the configuration and programming is done on a host pc, which connects to the pxi and deploys your programming.

• How to remove the partitions of system tools, restore and hp?

  Im trying to dual boot my new laptop with win7 and ubuntu

  How can I remove the system and recovery partition tools hp

  You can delete also use disk management in Windows.I think it is recreated if you update the BIOS so I would get the last update of the BIOS of your support page now.

• RMAN Duplicate Database of ASM to the no ASM files to the remote computer system

  Hello
  
  I have 11.2.0.3.0 of oracle in Windows 2008 server R2 64 bit version. I installed the ASMDB with ASM database... Now, I have another a machine, I want to clone my
  database in this machine with no ASM filesystem ... Can someone tell me step by step document to do?
  
  Can I keep the name of the database as ASMDB in another Machine?
  
  
  Thank you and best regards,
  Vikash Chauradia

  What about password file? also, should I create in the auxiliary database?

  Yes

  and also a doubt when you create pfile should I mention the location of the control file in that?

  Yes

• New hard drive; Restore System Image taken of the SAME computer Windows7: (RE-) ACTIVATION

  Daughter bought TWO IDENTICAL Windows7 Home, laptops Dell Inspiron, EACH WITH ITS OWN PRODUCT KEY. Was given a laptop to MOM as a gift. MOM's hard drive died later. Bought and installed a new hard drive with the same features in MOM's laptop. Used a picture of daughter portable computer system to restore Windows7 Home for MOM's laptop. Everything works perfectly. NOW WE WANT TO (RE) ACTIVATE Windows7 MOM home.

  I guess that (RE-) ACTIVATION must be done.

  QUESTION: Is it easier to enter the original product key to MOM which is a clone of Windows7 girl on MOM's cell phone, then do a normal activation?

  Thanks for your help.

  (While I have your attention, can you remind me what the path is to get to the place where I get the product key?) (Thank you.)

  Problem solved. Thank you.

  It was easy. When I went into the system on MOM's laptop he already said: "Windows is activated".

  Another question arises: the product key he showed, that must have been imported with the Image of the system taken mobile identical to daughter, had "OEM" in the middle of it. Does this mean that the product keys, use two laptops are actually some generic, common Dell product keys and NOT the product keys shown on the bottom of the respective laptops?

  A kind of activation of convenience for Dell customers?

  Thank you, again, for your help.

• Running discovery failed in the test environment.

  I have a layer of 5.7configured in two VCM plant newly installed in a test environment. Whenever I run the detection using AD, it fails when I try to specify the name of the computer that I want to add, it fails. I installed no agent of vcm on the test computer. I also tried race discovered by its IP address by specifying the IP address after the discovery, it lists all the servers in the subnet and it also says the State connection access is denied. Y at - it a doc detailed steps on how to correctly configure VCM first time in the environment.

  The VCM Admin Guide contains initial configuration step by step information, and all assistants, such as the Discovery Wizard, have fairly detailed context-sensitive help. The online help is the main documentation for the VCM.

  In case you, I think you two or three problems:

  1. you must add an administrative account network which will be eligible for the domain that you selected LDAP query and may directly contact the machines, if you selected this option. This is done under the authority of Administration\Settings\Network. Add the account to the accounts available, and attribute to him, by domain or group of computers all Machines.

  2 (and maybe 3): write file system access denied message that you receive when you try to manually add a computer because either you are using a user account that does not have NTFS permissions to write to the Program Files (x 86) of \VMware\VCM\WebConsole\L1033\Files\Discovery_Files directory, or you use an administrator account that has rights , but you are running Internet Explorer on the manifold itself and have not started it "as Administrator" way UAC is blocking your right to write the file.

  Not sure about the question of the UAC, but the rest of this figure in the Administrator's Guide.

  See you soon,.

  Paul

• backups system state backups vs vm

  Hello

  There are a lot of practical documentation on system state backups, but what's the point of system state backups, if you are running backups of virtual machine using the vstorage api.  I know that for the AD, a backup of the system state is better that one vm, backup, but other than that, has no useless system state backup is a backup of virtual machine (I was going to say redundant).

  I am trying to develop a strategy for which use.  My preference is to make backups of VMS (no file level) and use sparingly system state backups.  Do both adds to planning of backup with more, that there is less tolerance for a backup window and more an expectation of off-host backups.

  falcone1

  DSTAVERT wrote:

  For a domain controller you need to make backups of system state. Without them, you may lose AD. According to the recommendations of Microsoft at least twice a day.

  This isn't a very good statement. As always, 'it depends' - depends on your image-level backup solution. With Veeam, you have not had do this - unless you want to have redundancy on the backup of the same data twice.

  However, with the image at the level of backup solutions which are not multi-application and do not treat virtual computers running some applications in a special way on the backup and restore, you certainly to do that. Otherwise, in case of DC for example, you will end up with a USN restoration on the restoration, and it will screw up your ad.

  In addition, just to cover some other points above:

  If you try to restore a DC from backup of image based (i.e. a backup to the current no AD) in a multi domain controller environment, you will almost certainly encounter problems of replication synchronization after restoring as the AD database was restored in a way not supported.

  That's right, unless you use the image-level such as Veeam backup solution, which performs backups multi-application and – most importantly – multi-application restorations.

  Also, image based backups not serve to an Exchange Server transaction logs, so it will continue to grow until a backup of the information store.

  It is also an accurate statement of many image-level backup solutions. Most of them do not at all cut the Exchange transaction logs. Some will be plum them immediately to the creation of the snapshot (before the backup is completed successfully) - which is actually worse than not not their pruning at all - because you find yourself without reliable backup and logs are gone too. And only a few image-level backup solutions (for example, Veeam) will do it properly, pruning Exchange connects after successful only backup.

  I would definitely test any solution backup abundantly in the test environment with applications, before making decisions on the backup strategy. There are too many marketing of nowadays. Many image-level backup providers tend to make a big deal of features without importance and features of the product, while being silent to not have more basic, core features that are expected of any backup solution - as above - correctly handles backup and restore applications.

  I hope this helps. Warning, I work for Veeam.

• Backup system state data

  I want the XP Home System State backup as the data I plan on the rationalization of the registry and of course need the backup in the case where I live.

  Microsoft has a backup program on the XP home CD.

  Toshiba has a recovery disk so I don't have the CD.

  I don't think I needed the backup program that I have another backup program, but I was wrong. To back up the system state data, my backup program requires that I have copy their help:

  To back up the locking system files under Windows NT4, 2000 and XP systems dfg backup XP uses components of NT backup, which is part of the operating system. In Windows XP Home Edition that the NT backup is not installed by default, so you must install it manually. The NT backup is located on the Windows XP CD in the \VALUEADD\MSFT\NTBACKUP directory. If you need to restore files in the System State, you will need to use the NT backup after you have it extracted from Zip archive.

  So it seems the only way to save the complete registry and the boot files is to install Microsoft backup program.

  It's on the the recovery Toshiba Satellite 2450 this disc anyone know? It is not the disk tools.

  I can't find anything on a backup program listed here.

  Appreciate any help.

  Hi TW,.

  Check if you have a "VALUEADD" folder installed on your HARD drive. Some OEM installations actually install to the hard drive. You should find the Microsoft Backup utility in there.

  HTH

• GPIB analyzer works only with the Trace of e/s on the same computer

  Following the advice on the basics of knowledge I want to capture Trace IO simultaneously with the

  Capture on the field PC Analyzer.  This is because I have to go on a customer site and only want to

  capture non-intrusive traffic GPIB.  The IO Trace does not capture the field of PC that has the GPIB +.

  card.  When I run IO path on the Test PC, it works fine.  However, I want to avoid encroaching on the

  Setting up clients to say IO Trace Facility.

  If I run a basic series write and read VI. EXE on the PC in the field and to perform only IO capture of this

  works fine (no instrument not attached - just to make sure IO Trace works on PCs in the field).  If I run the NOR

  draw on its own on the field PC, then run the Test PC controlling Instruments, IO Trace is

  does not work.

  At this point, I wonder if Analyzer and IO Trace can not run simultaneously on the same PC?

  OR Trace does not work with GPIB cards +?

  Help much appreciated.  Thank you

  Trace of e/s OR and GPIB Analyzer can be run on the same computer, but not in the way you want.

  The GPIB analyzer is actually a Logic Analyzer, which "listens" for all lines GPIB directly from hardware. For this reason, it can be run from any computer connected to your GPIB topology, even it is not involved in the transers. This allows almost completely corner the bus logging.

  Trace IO OR works with drivers OR Save function calls that are made. These function calls can only be captured the system where they are called, therefore NO IO Trace should run on the test computer. Trace IO NOR will always be a small impact on the time where the test system, due to the time it takes to connect to each call.

  -Jason Smith

• Traded to the new computer hard drive.

  I moved a hard drive with photoshop on it to a new computer and when I launch photoshop I get error error 16 photoshop cc 2015.5

  Was you swap a boot disc and did start you the new calculated with the OS on this drive.  If this isn't the case, you must install Photoshop on the new computer.  The Photoshop Installer must configure Photoshop in the new computer system configuration. You can not simply launch Photoshop.exe located on the shared disk.

• I uninstalled a program that says he would remove the registry entries but the system subsequently restore says I have does not changes to the computer.

  What can I say?  System Restore is not useful for me.  Too often, there is no restore my computer to an earlier state.

  System Restore rarely admits that I had changed the computer - even when I uninstalled programs in the root directory.  What takes to "make changes to my computer?

  Install programs often has no changes - he said.
  Often the programs uninstaller is not make changes either.

  I did both today and could not undo the changes.  Tired of this.
  Save the register will take the place of the system restore?

  At least I can save the computer with Acronis True Image or Norton Ghost.

  Thank you
  Richard

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  What problem are you having this thing you that System Restore will remedy - or you're just in practice?  (It should still work).

  Some anti-virus / Anti-Malware tools 'protect' your system so that they will not allow a restore of the system work properly.

  For example, if you use Norton/Symantec products, you will see a message like this:

  Restoration incomplete. Your computer cannot be restored...

  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  Depending on what you use for malware protection, you may need to disable the product temporarily, to the restoration of the system, then
  Turn on the product.

  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.

  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  Well, it seems to work for some configurations.

  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.

  Give these ideas some consideration if they apply to you.

  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.

  No matter what you use, I do so and then only begin to solve any problems:

  Download, install, update and do a full scan with these free malware detection programs can solve any problems:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  It can be uninstalled later if you wish.

  The scans by operating clean, reboot, test and we can fix any other issues.