Only the blue background shows only when using the Oracle cards

Similar Questions

• The Oracle cards and the SDO_INTERSECTION problem

  Hi all
  
  I have a SQL query that uses SDO_INTERSECTION and I would use it to create a dynamic theme using the API Oracle cards.
  
  I tried several other applications and they all work very well, displaying the information correctly. My query using SDO_INTERSECTION runs and returns the correct results in SQL Developer, but when I use it to create a dynamic theme in the Oracle cards I get the following error:
  
  * "Request string is too long for no AJAX of Oracle remote access cards."
  
  I read on another thread that you can call MVMapView.XMLHttpRequest (true) for this problem, but if I do, no times are displayed on the map, not even with other requests, so I guess that's not the solution.
  
  My SQL query is:
  

  SELECT * FROM (
  select sum(emissao_fact.quantidade_emitida), 
  sum(emissao_fact.limiar_poluente), 
  ROW_NUMBER() OVER (ORDER BY SUM(quantidade_emitida) DESC) AS rownumber, 
  concelho.concelho_id as idin, 
  concelho.nome, 
  bacia.nome as bacia, 
  SDO_GEOM.SDO_INTERSECTION((SELECT geom FROM concelho concelhox WHERE concelhox.concelho_id = concelho.concelho_id), SDO_DIM_ARRAY(SDO_DIM_ELEMENT('X', -180, 180,.00000005), SDO_DIM_ELEMENT('Y', -90, 90, .00000005)), (SELECT geom FROM bacia baciax WHERE baciax.bacia_id = bacia.bacia_id ), SDO_DIM_ARRAY(SDO_DIM_ELEMENT('X', -180, 180, .00000005), SDO_DIM_ELEMENT('Y', -90, 90, .00000005))) glocal
  from instalacao, emissao_fact, concelho, bacia
  where emissao_fact.instalacao_id = instalacao.instalacao_id AND instalacao.BACIA_ID = bacia.bacia_id AND instalacao.concelho_id = concelho.concelho_id
  AND instalacao.concelho_id = concelho.concelho_id
  group by concelho.concelho_id, concelho.nome, bacia.nome, bacia.bacia_id
  ) WHERE rownumber <= 5

  As I said, it performs well on SQL Developer, is probably not relevant here.
  
  Any ideas? Thanks in advance,
  ~ Ruben

  The problem is "application of string is too long for no AJAX of Oracle remote access cards. It is caused by 1) the mapviewer server is in a different field than where your application is running, and 2) queries sent to the server remote mapviewer are too long. You query has nothing to do with it. You can read the documentation of the API for MVMapView.enableXMLHTTP to learn more about this issue.

  To resolve this problem, you must call MVMapView.enableXMLHTTP (true) to force the client to send AJAX requests via proxy MapViewer servlet. The proxy servlet MapViewer belongs to mapviewer, and it must run in the same domain when your application is running. To activate it, you must only deploy a dummy MapViewer on the same app server where your application is deployed. The proxy servlet will work once mapviewer.ear is deployed. No configuration is required.

  If using proxy MapViewer servlet, this is not an option, you must configure reverse proxy with Apache web server, that is to say where the application runs. Reverse proxies accept the requests sent to mapviewer servlet URL that is local to the application and to transfer requests to the server, in mapviewer to remove. You need to set up one for http://remote-domain/mapviewer/foi and one for http://remote-domain/mapviewer/mcserver. They serve a virtual mapviewer instance running in the application domain. In your application, you must set the mapviewer for the application domain, http:///mapviewer base URL. In the browser, applications are now sent in the same domain, so it is more cross domain issue.

• HP photosmart 6510: error on hp photosmart 6510 showing-95 when using scan to email

  My photosmart hp 6510 displays error - 95 when using scan to email. Help!

  Hello @twinec, greetings!

  Thank you for joining the Forums of HP Support! I came across the question you posted, and I want to help you with the best of my knowledge.

  You can try a manual DNS address assignment to fix most of the analysis of the questions by e-mail. Try the steps mentioned below and check:

  • Get the IP address of the printer, you can touch the 'Wireless' icon on the Control Panel printer to get the IP address.
  • Type the IP address in your web browser to get the EWS page on your computer printer.
  • Go to the 'Network' tab - click on "wireless (802.11), and then click «network address (IPv4)»»
  • Click on the radio button that says 'Manual of the DNS server' and under manual type favorite 8.8.8.8 and manual replacement enter 8.8.4.4 (it is Google's DNS server address)
  • Save the settings. Restart your modem, router and printer.

  Let me know how it goes! Good luck

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Vertical lines shows that when using document feeder / have given help and discussions, no luck

  I have two printer hp models 1536.   Two of them have a vertical line when using the loader to scan or copy documents.

  When you place the point on the glass, scanning or copying is clear.

  Reading the discussions... tried to plug directly into the wall, cleaned feeder and glass, etc.

  I still have this problem

  Any ideas?

  Driver or firmware problem?

  The question is probably not a driver or firmware issue - it is probably a task on the thin glass used for playback through the ADF.  Try to clean the glass broadband of 1 "to the left of the main scanner glass. A tiny spec can cause the problem you are experiencing.  It can help to hold a flashlight almost parallel to the scanner glass to highlight all the stains on the glass.

• Error-200284 when using two daq cards

  I have an application written in Visual C++ that reads data out of a data capture with success card. However, now we want to add a second DAQ card, so we can increase the number of input channels. However, I have trouble getting the second card works fine. He continues to give the 200284 whenever I try to read the input data. I tried playing with the two loops in the same thread and with them in threads separated without result. Any ideas on what could happen?

  Thank you!

  Hello Kaladin,

  I'll take a look at the link below to see the cause of the error, but also some common things suggested to try.

  http://digital.NI.com/public.nsf/allkb/FEF778AD990D5BD886256DD700770103

  Best wishes!

• Insert a div for a single document case back only when using external CSS stylesheet.

  I'm trying to set a background image in one of my div boxes, but because I am using an external stylesheet it changes it in all my documents. How can you do with just this one page? Preferably in design mode.

  What I was doing to slove this problem was:

  • Open my external CSS stylesheet
  • Copy the contents of this
  • Remove the CSS link in a page, that I wanted to be different.
  • Paste the content in thein the rest of the page CSS rules.

  Then I could put a background in this box without affecting other pages...

  I tried the other suggestions, but could not get to work. Don't say that they are wrong, but maybe I was wrong implementation does not.

• Blue screen error: 0x0000001a when using system to restore with new hard drive disk

  original title: blue screen error when you use the system disk to restore with new hard drive

  I bought a new hard drive to my computer because the old one gave me a bunch of error messages on screen blues. I installed in the tower and tried to use my restore and system recovery disks that the manufacturer has given me, the process has got to the last disk then asked for the system once again restore disc, and then began to load the last steps and went to blue screen error. I don't know what to do, I mean it's a whole new drive hard, so where could the error come, theres nothing on the hard drive because I have not yet used really, yet. Help, please

  I have finally fixed the problem myself. The problem was that one of the sticks three memory was bad and the only way I could test this error. I took two sticks a left, used disks I had and was able to restore my computer, then I put a stick, turned on the computer, had no errors so I let him, so I put the last stick in and com immediately on, I had the Disconnections: memory management and that's when I knew that the last stick of memory was bad I took it back and now my computer works well and I can't buy more memory for not too. So if someone gets this BOSD error on memory, I'd say 8/10 computers have bad memory (not a number). If youcannot run the tool of diagnosis of memory like me then I would suggest to do what I did with the trial and error, it was the only way to understand the problem. Thanks for your help

• Blue screen error 0x0000007F When using Windows Media Player

  original title: need help w/video

  my hp Pavilion a1240n crashed to the point that I had to replace the hard drive and reinstall windows xp, then go to 7.  After 2 1/2 weeks of the trial, I am still unable to play a dvd, or get a video game to play.  If anyone can help me, chk the specifications of what I have and give me some options on what I can try.  The last time I tried WMP, I received a stop message 0x0000007f blue screen.  Help!

  A few quick to test things:

  Test your memory with a memory tester. Something like http://www.memtest.org/ perhaps, or an equivalent.

  Update your graphics card and sound card drivers to the latest W7 drivers available at HP for your PC.

  As test, download and install (free) VLC. Can do this reading of videos? In a first time, as this is just a test, do not let 'take over' as a default player until / unless you're happy with it. Just manually open a video with her.

  If you look in what is your WEI score and the base system in detail, i.e. amount of version W7 ram, CPU, and what is your GPU card?

  Basic details of 7F - http://support.microsoft.com/kb/137539

  Armed with a little more information, a person may be able to help more.

• 8500 A909G - Feeder causes black streaks on faxes/scans/print jobs... ONLY when you use the charger

  Charger cause black streaks on faxes/scans/print jobs... ONLY when using the charger... If I put something on the glass and printing fax/scan/or it... everything's fine... it was ONLY when I use the charger... did someone come up with a solution to this problem?  Looking at the other reports, it was NOT those that have been fixed... I hope that someone can help me solve this problem, as it was NOT a printer not expensive to buy...

  I'm sorry you have a problem with the vertical lines in the ADF.

  Try to clean with water and lint rollers. There is also a glass of small strip (rectangular) when you lift the lid. Also clean.

  Here is a link that can help you too.

  http://support.HP.com/us-en/document/c01618140

  Let me know if it helps.

• Single line vertical when using the ADF to Scan or copy on HP Officejet Pro 8600

  Printer HP Officejet Pro 8600 Premium (CN577A)

  OS: MS 7 64-bit

  When you use the ADF for my printer HP CN577A Officejet Pro 8600 Premium, I get a single vertical line on the document which is produced. This occurs when copying or scanning, both black and white and in color. If I scan or copy using the glass, I do not get the vertical line.

  I already tried troubleshooting.  I unplugged the printer, left without electricity for several minutes; that didn't fix the problem.  Then, I cleaned the rollers and glass; I always get the vertical line, but only when using the ADF.

  My firmware version is up to date (CLP1CN1150CR).

  What should I check next?

  The only difference between the ADF and scanning flat, from a point of view of the scanner is there on the glass, it happens.  I suggest you get a bright flashlight and examine the corresponsing area hence is the line, it's almost certainly a spot on the strip of thin glass which is being just in the right place.

  I've seen some people suggest that put a flashlight almost parallel to the Strip, it shines from the bottom can highlight the area problem.

• background shows through the Web site

  I don't know more how the entire page to have a white background (except where I have background pictures) and still have a blue background outside of the page.  Here is my page-

  http://indianaeagleforum.org/index333.htm If I do the background of the ".container" white (#FFF) who disobeys.  My background color of the body is #3366cc if I change it to #FFF everything will be white, but I wish that the page was white with a blue background outside of the page.  I already went to the properties of the Page and the background #FFF.  Should I take the height columns?  You will notice that the blue background shows through the site just above the footer.  I use CS4 on Mac using Snow Leopard 10.6.8. The browser does not seem to matter, but it's Firefox 8.0.1 what should I do?  Thank you very much.

  Or add overflow: hidden to the style of the container rule...

• machine starts, but no office is displayed only the blue background.

  Start Active bar, can't right click in blue background, try 'system restore' but returned back without modification, returned to 11 June system began to behave "funny" 28/29 June. Even the 'VIEW' tab in the conrol Panel cannot me scroll to choose any background can only change color.

  Can you please help?

  Hello Alan,.

  This problem occurs when a registry key is set to hide or lock the display settings on the computer. The registry key can be set by a policy of administration or by malicious software.

  For more details or to solve this problem, please click the link below:

  http://support.Microsoft.com/kb/921049

  Any other questions, please let me know.

• Show LOV only when the field is empty

  Hi all
  My surroundings:
  Oracle 10g on Windows
  Forms [32 bit] Version 9.0.4.1.0 (Production)
  Oracle Database 10 g Enterprise Edition Release 10.2.0.5.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  Oracle Toolkit Version 9.0.4.1.0 (Production)
  PL/SQL Version 9.0.1.5.1 (Production)
  
  My problem:
  I have a field in a block, which is text_item and is linked to an element of LOV. I want the LOV appears automatically, whenever I tab in there, only when the element is EMPTY (for example when I try to insert in the block). When, upon request, it should show only the value in the field, and user can choose to activate the LOV, by pressing F9, if she wants to. It now displays automatically each time text agenda is a debate (works very well when the user is inserted, but annoying when she questioned the shape and trying to tab thru.) Every time she focuses on the field, LOV is popping up!)
  
  The current setting for the property on the element of text field: Type: text element
  The list of values: MY_LOV_NAME
  Validation of list: Yes
  
  Properties on MY_LOV_NAME
  Auto display: Yes
  
  Any suggestions? Or trigger level I can use, and if so, what build_in can use?
  New forms and will greatly appreciate advice from pros!
  
  Thank you
  Libran_girl

  It's very simple,

  IN once - new - item - Instance

  DECLARE
  V_LOV BOOLEAN;
  BEGIN
  IF: NOM_ELEMENT IS NULL
  THEN
  V_LOV = SHOW_LOV (LOV_NAME);
  END IF;
  END;

  Try it, you will get your result, if it doesn't work, try: block_name.item_name

  Abbas

• How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you reconnect then wireless.

  problems with wireless Vista "local only".

  How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?

  Hello

  Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer.  Since he does not have details of the database of network devices, communicate with him.

  • You are able to access the Internet?

  Try the steps mentioned below and check:

  Method 1:

  Step 1: Enable or disable a network adapter and then check:

  http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter

  Step 2: Run Network Diagnostic tool and check:

  Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference links:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041

  Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx

  Hope it works.

• The index used only when given Index indicator

  Hello

  Version of RDBMS - 11.2.0.3.0

  I have a situation where only when I use the Index indicator, index does is used.

  Use case: -.

  1. SELECT query on a table with about 100 KB of data.

  2. have the index on the column that is used in the WHERE clause of the SELECT query.

  CREATE TABLE him_entity (id NUMBER, him_val CHAR(1));
  
  
  INSERT INTO him_entity
  SELECT rownum,'1' FROM dual CONNECT BY level<=1000000;
  
  
  CREATE INDEX idx_him_val ON him_entity(him_val);
  
  
  
  
  
  

  Without using Index indicator, Explain plan: -.

  SELECT ID 
  FROM him_entity
  WHERE him_val='1';
  
  
  -----------------------------------------------------------------------------------
  | Id  | Operation         | Name          | Rows  | Bytes | Cost (%CPU)| Time     |
  -----------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT  |               |  1000K|  4882K|   498   (5)| 00:00:06 |
  |*  1 |  TABLE ACCESS FULL| HIM_ENTITY    |  1000K|  4882K|   498   (5)| 00:00:06 |
  -----------------------------------------------------------------------------------
  
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
  
     1 - filter("HIM_VAL"='1')
  

  With the help of Index indicator, explain the plan: -.

  SELECT /*+ index(him_entity idx_him_val)*/ ID 
  FROM him_entity
  WHERE him_val='1';
  
  
  ---------------------------------------------------------------------------------------------
  | Id  | Operation                   | Name          | Rows  | Bytes | Cost (%CPU)| Time     |
  ---------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT            |               |  1000K|  4882K|  3485   (1)| 00:00:42 |
  |   1 |  TABLE ACCESS BY INDEX ROWID| HIM_ENTITY    |  1000K|  4882K|  3485   (1)| 00:00:42 |
  |*  2 |   INDEX RANGE SCAN          | IDX_HIM_VAL   |  1000K|       |  1824   (1)| 00:00:22 |
  ---------------------------------------------------------------------------------------------
  
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
  
     2 - access("HIM_VAL"='1')
  

  (1) could you explain why Index was not be picked up without indicator Index for help?

  (2) I gathered statistics for the table before running the query.

  (3) is it fine / safe to use the FIRST_ROWS hint instead of Index indicator?

  Thank you...

  1. SELECT THE ID
  2. OF him_entity
  3. WHERE him_val = '1';

  You select all the rows in the table.

  As your query will extract all lines then the optimal trajectory IS FULL TABLE SCAN instead of using INDEXES

  If we let you use less than 5% of table rows, and then using index can be an optimal trajectory to go for the record.

  1. SELECT / * + index (him_entity idx_him_val) * / ID
  2. OF him_entity
  3. WHERE him_val = '1';

  Your strength of indicator Index to fetch the file by using the index of the query