OnPlus Agent connected to 802. 1 q Trunk

Similar Questions

• RALink RT3290 802.11bgn Wi - Fi adapter will not connect to 802.11 g, windows 8

  Hi eeveryone,.

  Some can help me!

  I bought a new laptop HP Pavilion g7. Ralink RT3290 802.11bgn Wi - Fi adapter I but my problem is that I can only connect to the network 802.11 n and I can't use wifi 802.11 g. When I try to connect wifi 802.11 g it says limited is unable to download a Web page, but should I use with this adapter Ralink 802.11 bgn Yes?

  I've already updated the wireless card but did not help I have disabled all firewall and antivirus software and I have already written here manually the IP address, netmask etc... I got the software window 8.

  But the funny thing is with my old laptop which has windows 7 that I can connect without any problem WiFi 802.11 g!

  I would use 802.11 g, because the signal is stronger than 802.11 n. I hope I can receive the signal of network wifi 802.11 g somehow.

  Thanks for your answer in advance!

  maybe try to reinstall windows and check how it works without installed programs

  You can also restore your windows settings to check

• Only connect on 802.11n 5 GHz

  Hello

  I have the WAP321 to boost my wifi at home but I only managed to set up a stable wifi connection on 802.11n 5 GHz.

  Not all of my devices that support the 802.11n 5 GHz only a limited number of devices can connect. For example my iphone 4/4s does not connect.

  I think I'll have interferences of neighbor wifi AP but it must me a way to measure the field strength and determine a Setup program that will give me a good wifi signal on the tape 20GHz.

  Someone at - it suggestions to solve this problem.

  Kind regards

  André

  Hi Andre, you can install a program called INSSIDER made by Metageek. It can tell you about the interference and strength, etc.. It's a free program.

  The Iphone 4S doesn't have a capacity of 5 GHZ.

  http://www.Apple.com/iPhone/compare/

  -Tom
  Please mark replied messages useful

• How to change IP address of Agent connection on the server running?

  I have problem with the change of IP address of the agent as opensource Hyperic 4.0.2
  I changed the IP address of the agent system and after a reboot it show up on the dashboard for autodiscovery with note new IP address. I can open in Autodiscovery and click on 'OK '. So far so good. Can I browse the resources and find this platform and I'm taking the inventory. Now, it is not so good - I can see old IP address in 'properties Type and network '. I can add the new set IP address, mask of MAC manually and remove them manually the old IP address and it seems better. But the big problem is "Agent connection" field - it's still shows old IP agent. I run the query to change the IP address in the EAM_AGENT table for the corresponding id. It still shows the same old IP address in 'Agent connection' and it's drop-down list where I can't find the wiring is correct!
  Now, it's a way of communication - it seems that I get the measures defined previously, but I can't define new service to monitor. A quick test is to run live Exec 'df' command -, error message indicates that the server is trying to connect to the old IP address of the agent.
  I searched through all tables in database and it is not there. My guess is "cache". Is it possible to invalidate cache entries? Or hide it all?
  I restarted the Hyperic server, which is already bad in itself - why I have to restart the server if the broker IP address? This solved the problem with value of agent connection - now it shows the right IP address (it looked really as if it were in the cache), but it did not help too much. Now when I do ' live Exec - df "I get"unauthorized"error message. I have not deleted the directory of 'data' still on the side of the agent, but it seems a little too much work when the stockbroker IP address:
  -Restart agent
  -recognize the IP address change in the dashboard on HQ Server
  -to run the query to edit the EAM_AGENT table
  -(via user interface or through SQL query) remove old IP address manually and add a new IP address in the network platform properties
  -restart the server
  -delete data on the agent, and then restart the agent.
  
  Is there a better way to deal with it? I'm mainly looking for a workaround to restart the HQ server to change 'Agent connection. And blowing all directory data is not a good approach either - I have spent some time to add and configure the log files and services to monitor. If I understand correctly, it must be configured again.

  Hello

  normally execution of installation interactive on the Agent (HQ - agent.sh of installation) and recognizing changes in Autodiscover should suffice.

  Mirko

• HP Pavilion dv6t-7000: Ralink RT5390R wireless adapter does not connect to 802.11n network

  I have a HP Pavilion dv6t-7000, equipped with the Ralink RT5390R wireless adapter.  For the life of me, I can't get it to connect to my home network when implemented as 802.11n.  They connect other devices. If I change my router 802.11 g, but no other change, doe HP connect. But if I return the router to 802.11n, HP sees the network, and it correctly identifies as a 802.11n network, but does not connect.

  The router is a D - Link DIR-615 (N300 2.4 ghz)

  All this experience? All solutions?

  Woo-Hoo.

  Found a solution.  Both HP and windows said I had the most current drivers, but this HP forum had a link to a newer driver.  Installed and it worked.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Wi-Fi-problems-HP-Pavilion-G7-1338dx-notebook-PC/m-p/1836467#M33729

• Re: Satellite L300 connects to 802. 11 g, but not the 802. 11B wireless

  I'm trying to connect my new wifes computer laptop Satellite L300 my 802. 11 b wifi (WEP-active).
  It fortunately detects and connects to my network 802.11 g of neighbors, but could not find my 802. 11B.
  Other portable fortunately find and connect to my router.

  OS - Windows Vista

  Any help would be appreciated.

  Hello

  Did you choose the standard 802.11 b in the WLan card properties?
  Check this box...

  You can reach these settings go to Device Manager-> properties-> Advanced tab WLan card!

  Here, you have to choose (enable) then 802.11 b
  Please check also if the router and the wireless network adapter using the same channel!

• WiFi (slow connection on 802.11ac) subjects with 10.11.3

  My Macbook is connected to a router TP - Link Archer C7 on 802.11ac v02 (5 GHz). Sitting next to the router speed is between 800 and 900 Mbps.

  First I had problems after wake her from her sleep. Speed has fallen to 7 Mbps. After toggling wifi turned off/lit, speed was normal.

  Now, I've upgraded to 10.11.3. At the start speed is between 29 and 59 Mbps. sometimes it gets easier, but maximum is of 400 Mbps.

  I tried:

  -Reboot everything

  -Removed Wifi config/service

  -Static IP, DNS, IP v04/v06, MTU

  -Various parameters of the router

  -/ Library/Preferences/SystemConfiguration deleted

  -Reset the PRAM/SMC

  RSSI:-50dBm, noise:-83 dBm

  If I boot in safe mode, all right. Normal speed to 900 MBit/s. No problem with sleep, etc., but only in safe mode!

  Any suggestions?

  You may have installed a third-party application that claims to provide anti virus, protection, management, firewall, cleaning, etc. If so, uninstall these applications.

• Problem connecting to 802.11n networks on Vista or Windows 7

  Hello

  Under both Vista business and Windows 7 Enterprise, I can connect to an 802.11n network only if the computer has not slept or hibernated. If the computer is asleep or in hibernation, I can connect is a 802.11n network until I restart. However, I can still access the 802. 11b / g fine after sleeping.

  Is this a problem driver or a matter of Intel 5100 AGN.

  One of them was to disable "Energy savings" in Manager device for the card, but that seems to make the system from time to time wants a blue screen.

  Not sure if it's a hardware problem, driver problem Intel or a Windows problem. Maybe someone could put a good solution, the version of the driver or the hotfix.

  Updates Microsoft or updates to Lenovo Power that came out last week corrected it. I had no need of updates to Intel.

• Satellite Pro M10 model PS630E. Connection via 802.11 G

  This laptop with a Centrino 1.5 GB processor, is possible to upgrade the wireless, so it can detect the routers wireless 802.11 g, as it seems to see 802. 11 b. Y at - it a update driver or more up-to-date firmware.

  Hello

  I think that the simplest solution would be a use of external USB WLAN which would promote the standard WLan 802.11 G.
  The WLAN USB key is easy to use, cheap and you do not need to disassemble the laptop in order to upgrade the WLan card.

  Visit some online retailers I m you will get a nice one for a few bugs

• Manager of the company - not available Agent connection

  Hello
  
  When I tried to open the Enterprise Manager, I blank homepage indicating that Enterprise Manager is unable to connect to the database instance. The State of the components are listed below. Listener not available, etc.
  
  but my interlocutor is in place and the status of emctl also running...
  
  help in this regard, hiighly appreciated!
  
  Thank you
  RAS

  you could re-create the company Manager for this problem

• RALink RT3290 802.11bgn Wi - Fi adapter will not connect to 802.11 g, windows 8.1

  Hello

  I'm not familiar with the forum. Hoping I can get any help

  Last week I boght a HP ENVY 15-j040el
  S/N [deleted serial number for personal protection to prevent others from using SN for filing fraudulent claims guarantee]
  Product number: E4N80EA

  Since the beginning, I noticed without wire did not detect signal of 5G of my router, but I was so anxious to perform the installation to the end

  Unfortunately, nothing has changed. I tried:

  -upgrade to 8.1 Windows

  -upgrade to 5.0.37.0 (25.11.13) RT3290 wireless network card driver

  I wonder if I should configure the parameters of the advance of the RT3290 driver

  Thanks in advance

  You are the very welcome, Sergio.

  I am a consumer like you and do not work for HP, if unfortunately, I do not know what model wireless cards HP installs in their notebooks.

  I agree with you, however, that 5.0 GHz has been around for centuries now, and it is high time that HP installs a better dual band $10 card.

  I'm sure that people would be happy to pay the extra price.

  My understanding is that HP may have removed the white list of BIOS to immobilize the wireless cards are not not in manual work, so you can experiment and see if you can install a dual band card in your notebook.

  No guarantee that it will work, but a year ago, I would have told you that it was impossible.

  See this thread.

  http://h30434.www3.HP.com/T5/notebook-hardware/HP-17-e016dx-WLAN-upgrade/m-p/3383443#M116640

  Best regards

  Paul

  P.S.: If you decide to take a chance on another wireless card, please let us know if it worked for you.

• 802 1 q trunk between ESX server and router Cisco

  Hello team.

  I want to create 3 VLANs on my server ESXi, each with 2 VMS and these VLAN transported by an external Cisco "router on a stick", that is to say router with a configured ethernet wth 3 subinterfaces, each of them for each of VLAN (IP subnets) inside the ESXi server.

  I built the following image to explain my purpose. First it is possible to implement on ESXi? I guess it is.

  Advice will be greatly appreciated.

  Best regards, Rogelio ([email protected])

  

  It will work very well. Ive done a similar thing in the past, but rather than use sub interfaces I used Lass rather on a layer 3 switch.

• ENVY 4500: Unable to connect to my 802.11n network.

  I have an Apple airport base station, set at 2.4 GHz.

  When it is set to use "802.11n (802.» 11 b/g compatible)"the printer connects without a problem.

  Airport report it the connection as 'PHY b/g mode.

  But I prefer to use "802.11n only. When I do, the printer will not connect to the network.

  Network test results indicate parameters - no. filtering FAIL. but the airport has no MAC filtering.

  The Printer Setup Wizard indicates my 802.11n network only, but does not connect to it.

  The specification, the printer is 802.11 b/g/n.

  How to connect to 802.11n only

  I solved this by logging in to the Web interface of the printer via the USB port and change the interface 802.11, an advanced option.

  Uncheck the box "in use of 802.11 network infrastructure using the behavior of b/g.

  

• Connection of the agent to the Instance is not

  New to Oracle, but confused with the old question. Did you find it? in past discussions with discussion unanswered.
  agent connection has not seemed to be a problem before restarting.
  the listener is up & running
  in the Enterprise Manager have the error message:
  "ORA-12505: TNS:listener is not currently of SID given in connect descriptor (DBD ERROR: OCIServerAttach).
  error sqlplus: "ORA-12162: TNS: net service name is incorrectly specified.
  Any clue?

  / as sysdba user name results in
  "ERROR:
  "ORA-12162: TNS service name: net is incorrectly specified.

  ORACLE_SID you put before firing 4 lines?

  Kind regards
  Julien

• OnPlus discovery and Nexus 5548

  Hello

  I just installed an OnPlus agent for a customer who has a Nexus with a 3 layer daugthter card 5548 as their central switch, but the agent is not discovered any device beyond the vlan in which he is sitting.  Does anyone have any experience with the OnPlus ageent and Nexus switches.  It is obviously not a Cisco device supported but I configured IDs connection and snmp access to the switch on the portal, but still nothing is discovered.  Any advice greatly appreciated.

  Concerning

  Ian

  Hi Ian,

  To discover the multi - VLAN, connect the On100 to an 802. 1 q trunk port. This will allow the On100 discover other VLANs. It is currently connected to an access port which is to limit the broadcast traffic of the other VLAN.

  Although the device is not currently supported, he discovered and enable basic support we provide for all detected devices.

  Thank you

  The OnPlus team