opening of a new printer port

Similar Questions

• Cannot add the new printer port for Central Output Server 5.7 under Windows Server 2012

  I am my output of an old Windows box to a new server migration and have problems with the new ports.  I have 6 installed instances and the last looks OK, but all the others get errors when all output is sent to them, even a Windows Test print. I have them all the same thing, with the format \\.\pipe\jetform\server5 configuration port

  When I installed the software, I installed all 6 instances then went through and added 6 local printer ports - it seemed to configure them OK this first time.

  My test was then on the 6th and last instance and went well.

  When I wanted to test the other forums, I found all simply erroneous jobs on the queue for the printer.

  If I have one of these printers connected to the 6th port, it worked fine.

  I deleted one of the ports that did not work and I tried to re-add. Then I got the message "the system cannot find the file specified."

  I tried to add the port via the registry - he added, but would not yet print.

  Then I noticed in the output server control center, when I tried to stop Central and start one of them, I got the error "unable to connect to the channel named"\\.\pipe\jetform\server5.ctr"

  I use a domain account that is configured to run Adobe services, he is a Director of field with all required fees

  I modified the local security policy to enable users to add printer drivers.

  And I have now run out of ideas! Someone at - it a?

  Thank you

  This was traced to one of still having ini files a record of the proceedings of last name installed (i.e. SERVER6).

  So it's fixed

• My new printer will not print on my Quicken reconcile report. It prints my program Word and e-mail very well.

  My new printer will not print on my Quicken reconcile report.  It prints my program Word and e-mail very well

  If I understand correctly your new printer (brand and model, please) is properly installed on your computer (version of Windows and the service pack, please), but does not print Quicken (version, please) reconciliation report.

  Without more information (such as an error message or description of what happens when you try to print), it sounds like all you need to do is to set up Quicken to use the new printer.  The following is for 2011 Quicken, but should be the same or similar for all recent versions of Quicken:

  Click file > printer setup > for reports/charts
  In the window that opens, select your new printer using the drop-down list.  You should keep the default margins and fonts.  Click OK and you should be good to go.

• Printer port configured incorrectly, how to remove or reconfigure

  I am setting up a new system of Windows 7 Home premium and made a mistake when setting up the new machine to access one of my existing home network printers. I have incorrectly set up a new printer port and need to know how to remove it.  When I try to install the network printer now (rightly), the wizard tells me to choose another port name because what I used already exists.  The port name is unique to my existing print server (DLink DP-G321) and should be used for this printer.  Can someone tell me how to remove the bad port configuration, or get the wizard you want to replace it?  I suspect that this may require a registry hack, which I have no problem to try with the correct instructions.  Thank you

  The 720C will not work on x 64 machines.  I contacted HP in this regard.

  "HP DeskJet 720C" is HPVDJ720. GPD.

  [HPVDJ720. GPD. CIM]

  E-mail address is removed from the privacy *, @HPVUD50. DLL,@HPVUI50. DLL,@HPVIMG50DLL,@HPVDB720. DLL,@HPVSCP50. DLL,@HPV700AL. DLL,@HPVDJ7XX. GPD,@HPVDJ720. GPD,@HPVNAM50. GPD Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• I have Photoshop elements 13.  I got a new printer Epson XP-960.  When I tried to print a photo I received a message: default printer could not be opened.  What now?

  I have Photoshop elements 13.  I got a new printer Epson XP-960.  When I tried to print a photo I received a message: default printer could not be opened.  What now?

  kareng44985000 wrote:

  I have Photoshop elements 13.  I got a new printer Epson XP-960.  When I tried to print a photo I received a message: default printer could not be opened.  What now?

  This is a known bug. Here's a tech note:

  Printing with Photoshop elements 13 errors

• new printer 8500, tried to open a session in eprint, said code has expired a new impression. It print give me cod

  Could not believe that a new printer had expired code.  Info on printer gives me the same code every time. Any suggestions

  Hi tgar847,

  Whenever the ePrint information page prints with the code, it is activated for 24 hours. After that 24-hour code expires, it print again activates the same code for 24 hours.

• options of the printer, check the printer port option.

  I have 3 printers, when I click on the printer properties---> ports---> there 'Add port, port to remove, configure port' options are disabled. Please let me know I can help them.

  Hi, Sridhar.bb,

  The printer model?  HP, Epson, Canon?

  This should be posted in the performance and Maintenance forum.  See the menu drop-down

  http://answers.Microsoft.com/en-us/Windows/Forum/performance?tab=unanswered

  How to enable Plug and Play detection for parallel port devices in Windows 2000, Windows XP and Windows Server 2003

  http://support.Microsoft.com/kb/254664

  The personal firewall and Open Ports

  http://h30507.www3.HP.com/T5/network-inkjets-from-the-inside/personal-firewalls-and-opening-ports/BC-p/41147?JumpID=reg_R1002_USEN

  How to make changes in your Compaq Presario PC setup (CMOS)

  1. Close all running programs and choose Start , stop , and restart the computer .
  2. When the Red Compaq logo appears, press F10 on the keyboard to enter setup.
  3. Press the right arrow key to select Advanced Options . This will display the configuration options.
  4. Press the arrow key down:
     • Enable/disable or make changes to serial port information, stop in the field there and press ENTER to display the options.

     • Enable/disable the parallel/printer ports, stop in the parallel port field and press ENTER to display the options.

     • To change the type of parallel/printer port, stop in the field of devices Configuration option and press ENTER to display the options.

  5. Use the down arrow key to select the parameter and press ENTER to select change.
  6. Press the F10 key to save the new setting and exit the configuration, and then press the Enter key to choose Yes to save the settings.
  7. The system will end from in Windows.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00035717&CC=ad&DLC=en&LC=en&JumpID=reg_R1002_USEN

• My new printer does not appear in the list of printers

  I bought a new HP Officejet Pro 8715 and I had great difficulty it is set up to use. It seems the method to print and scan drivers has changed dramatically since my last new printer. HP supplies over a CD with the software, but rather is supposed to happen automatically via the Apple software when I plug in the printer. This was not the case.

  At this point, I have the printer (4 hours) work, but I can't get the software "Readiris' of scanning to work. Yet once again, I am told that if I just plug the printer via the USB port and turn it on, then the OS knows what software to load. In reality, he doesn't "know" or "do" something.

  I tried to configure manually by going to System Preferences > Print & Scan and then by clicking on the sign more to add the printer software. This will show you a huge list of printers, but the list ends with "Officejet Pro 8660." My printer is a 8715, so there is nothing for my printer. Installation of the software for 8660 did not help to solve the problem.

  Two questions:

  1. why list of Apple printers does not have my printer?

  2. How can I get the Apple software to see the drivers for my printer?

  Thanks in advance for any help or advice!

  1. If the printer is a new model and HP did not provide Apple with the driver software, Apple would not list.

  2. go to the HP site to find and download the driver software.

  http://www.printerdriverforwindows.com/HP-OfficeJet-Pro-8660-driver-download

• HP Officejet 6835: Not to recognize new printer cartridges.

  Exchanged a defective HP Officejet Pro 6835 at Costco. I kept the old cartridges and Costco pulled the new printer cartridges and kept them. During the installation of the printer does not recognize the used cartridges. Error message received to use cartridges supplied with the printer configuration. Did not have them. Is gone to town & bought new HP cartridges and install. The printer took over in the same place on the installer. It does not recognize the new cartridges. What can I do? I can't start the installation program. I remove the new cartridges and reinstall them using and get the same message again. She can't get to work, so I'll have to make another 90 mile round trip to Costco to replace this printer.  Any suggestions?

  Doreen

  You will need to install cartridges for initial configuration, Costco shouldn't have removed the cartridges setup.  You can contact HP, they could send replacement cartridges setup or they may suggest that you only contact Costco.

  From a post of Sunshyn2005, contact technical support HP see the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number appear, this allows to contact HP.

• Can not use my new printer with Tecra A3

  I have a Toshiba Tecra A3 that I bought in the Middle East. Recently I bought a printer "EPSON STYLUS CX 4200 SERIES. I tried to install, but an error will come out that it is impossible to install the new hardware.

  This message "CANNOT INSTALL THIS HARDWARE, EPSON STYLUS CX4800 SERIES AN ERROR OCCURRED during the INSTALLATION OF the DEVICE. THE SPECIFIC PROCEDURE IS NOT FOUND.

  I followed the installation instructions because they gave. I contacted Epson support and give some instruction in which I followed correctly but still the same message came out. And another message came out. "PRINTER SEARCH CANCELLED BECAUSE THE PRINTER PORT HAS NOT BEEN CONFIGURED CORRECTLY. PRINTING IS NOT POSSIBLE. Does it means my laptop is not compatible for this printer or could I configure my printer port?

  Hello

  Strange!
  Please tick the option in the BIOS if the parallel port is enabled.

• HP Office Jet Pro 8720: Problem set up and launch the new printer & ink cartridge installation

  Two questions:
  First... it takes a LONG time for the computer to open itself.
  Then, when he did initiate... I opened the section of ink cartridge
  to install the ink & transport of ink would not come to the Center.
  SO... I stopped the printer to start again... and now, the
  screen has a spinning wheel indicating "cartridges controls."
  It lasts for more than half an hour.
  HELP... This is a new printer & I can't open.
  Thank you kindly.

  Hi @paulallah,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you have a printer of HP all-in-one OfficeJet Pro 8720 which took a long time to initialize and is now stuck in a mode 'check' cartridges after the reboot it because transport would not move to the Center. I would like to help with that.

  I would start by doing a Reset of the power on the printer.

  

  If that fails to solve the problem, you might want to speak with HP Technical Support as there may be a hardware problem.

  You mentioned that you are using a Mac running OS X 10.5 Leopard or more. The HP all-in-one OfficeJet Pro 8720 printer is only compatible with Mac OS X 10.7 Lion or later.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.

• New printer every time when I attach my printer on my laptop or a PC with xp

  Whenever I plug in my printer on my laptop, xp creates a new printer: when I plug it into different USb port whenever I get a new printer on my printer spooler, I mean exemplary appers 1 printer printer

  Hi DavidMERRIT,

  ·         What is the brand and model of the printer?

  ·         Faced with any issue when printing to the printer?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

• the printer port does not recognize hasp key

  I recently bought a Dell rebuilt to replace a running xp sp3 which had overheating problems with windows xp sp3.  I am running a previous software (7.5V2 friendly technology FlexiSign Pro) program that requires a hasp on a parallel port key.  I never had problems with the old computer recognizing the hasp key, but when I try to use this software on the new computer does not recognize the HASP.  I think what may be due to the fact that my new computer printer port is configured as instead of the lpt port ecp.  Is it possible that this could be my problem and I can change the port of older style? Any guidance is appreciated.

  Thank you

  Greg

  If the problem really is whether the parallel port in ECP mode, you can switch to EPP mode in the BIOS.  Restart the computer and keep a close eye at the beginning of the boot sequence for the message that tells you what key to press to enter the BIOS (change system settings or similar).  Restart again and press the key when the message is displayed.  You will have only a few seconds.

• I added on a new printer and lost my audio. What should I do?

  I added on a new printer and lost my audio. What should I do?

  Because this isn't a normal behavior, please provide the following information:

  What version of Windows you have, including the service pack (right click on desktop and select properties)

  What is the brand and model of your computer?

  What is the brand and model of the printer?

  Describe, step by step, exactly how you have added the new printer.

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Double-click any entry that displays a warning icon and a message in the box "Device status" report (also report what is the name of the device)