Optimus in HP ENVY 17 t-j100 Leap Motion

Similar Questions

• ENVY 17 t-J100 Leap Motion: keyboard backlit ENVY 17 t-J100 Leap Motion edition shuts down after each power down.

  My brother has an ENVY 17 t-J000 Quad Edition. Only about 6 months. Its backlit keyboard remembers its state of on or off when it reboots or off. When he turns on his laptop back, the keyboard is always if it's him on when he turned off the laptop.

  I just got the ENVY 17 t-J100 Leap Motion backilt keyboard edition. But every time that I reboot or shutdown with the backlight on, it is turned off when I have the laptop or reset. So whenever I have to re - turn on the backlight. Very annoying.

  Anyone else with the jump movement 17 t-J100 having this problem? If so, I hope it's fixed soon. I also can't update the Nvidia drivers then perhaps we need a BIOS update to solve these two problems.

  I just checked to be sure. It turns off if the laptop is turned off and turned on then again - but if I just restart the kbd is running.

• HP ENVY 17 t-j100 Leap Motion QE Notebook PC Port HDMI highest video resolution

  What is the maximum video resolution that can be supported with the HDMI output of the GeForce GT 750 M graphics card? I get a new "HP ENVY 17 t-j100 Leap Motion QE Notebook PC (ENERGY STAR)" as a guarantee of replacement for an older PC and new PC has only a HDMI connector for an external monitor. The GeForce GT 750 M graphics card will come with 4096 MB memory installed in it. I considering buying a series ASUS PB278Q LCD monitor and would like to know if its resolution 2560 x 1440 WQHD input is supported by Geforce GT 750 M graphics card. The entrance to the Asus monitor is HDMI version 1.4. As I understand it, if the PC's HDMI output is version 1.3 or later, it should be able to handle up to a 2560 x 1600 resolution monitor.

  I received my replacement 'HP ENVY 17 t-j100 Leap Motion QE Notebook PC (ENERGY STAR)' PC and found that I was able to use my monitor 27 '' Dell in its resolution full 1920 x 1200 with a HDMI to DVI cable - D. The cable I used was an AmazonBasics HDMI to DVI adapter cable (9.8 feet/3.0 meters), I bought from Amazon.com for $7.99, http://www.amazon.com/gp/product/B001TH7T2U/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1. I still have not been able to confirm the maximum resolution that can be financed by this PC, but either I have to upgrade to a new monitor because I can use my existing at its full resolution.

• HP ENVY 17 t-j100 Leap Motion QE CTO Notebook PC space bar does not

  I have justpurchased a HP ENVY 17 t-j100 Leap QE CTO Notebook PC Motion and as you can see by the rest of this work spacebardoesnt enregistrementLe consistentlywhen hurry.  It makes it very difficulttotype. IsThere a solution to this problem or do Ineed to replacethecomputer?

  Thank you

  Hello

  My best advice would be to get the machine replaced - the only thing that you can try everything first (if you haven't done so already) is to apply the latest update of the Bios on the following link.  This update is running Windows 7 or Windows 8.1.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-129960-1&cc=us&DLC=en&LC=en&OS=4158&product=6744479&sw_lang=

  Kind regards

  DP - K

• Install the latest Nvidia drivers on ENVY 17 t-j100 Leap Motion with 750M video, need help.

  I went back to the ENVY 17 t-j000 about 6 months ago because I could not install the latest Nvidia drivers. My brother has this laptop and after a few months, HP made an update of the BIOS and now it is able to install the latest Nvidia drivers very well.

  So I decided to try again the ENVY 17. This time, I had the model Leap 17 t Motion - j100 with 750M versus the graphics of 740 M.

  I downloaded the latest drivers from Nvidia and actually installed Nvidia. Rebooted and everything seemed fine. But he wouldn't let me not use the Nvidia Control Panel, because it seems that the screen was not connected to an Nvidia GPU.

  So I tried to install it again and choose the Clean install option. But to say question.

  Then, I did a complete uninstall of the Nvidia drivers and rebooted. Now when I try to install the Nvidia drivers, he says that does not find any compatible hardware. I did it today with the same single download from Nvidia. I don't know why he has installed two times before without any error and now it says that I don't have an Nvidia card.

  So TWO things:

  1. download the latest version of the driver reinstalled again.

  2 fix the error "No Nvidia GPU not attached" when you try to use the Nvidia Control Panel.

  I have all the latest Windows updates and updates from HP. I don't see the BIOS updates. Any ideas?

  As of today, I am able to install the latest drivers Intel and Nvidia available:

  • Intel provided HD 4600 driver version date 31/10/2013 10.18.10.3345 - via manual update disk, not the .exe installer method.
  • NVIDIA provided WHQL certified version release date 07/01/2014 332.21 (332.21-notebook-win8-win7-64bit-international-whql.exe file name), said driver 19/12/2013 - quick installation, normal use date Nvidia installer.

  Both these installed just fine and work perfectly together at the moment.

  I hope that latest drivers will continue to install and work together as new drivers come out directly from Intel and Nvidia.

  I'm just happy that I finally have two of the latest possible stable drivers.

• ENVY 17 t-J100 Leap Fingerprint reader seeing Motion?

  My brother has the motion of non-saut ENVY 17 t-J000. And he has a LED indicator to the left of the sensor fingerprint that lights in white or orange when you drag your finger. Which is really nice to know that it has detected your finger when you think that nothing is happening.

  But I just got the Motion Leap of his laptop computer version, and I don't see any LEDS light up when I slide my finger. The sensor works well though.

  So my question is, can confirm one that this model has or that there is no LED indicator as the motion of non-saut feel LIKE? I don't want to lose time to call HP if this model does not have the LED indicator. But if he does, I need to have the unit repaired or replaced before I get it all together at the top.

  Weird that it is not displayed, here's an imgur link, in case you still want to see

  http://i.imgur.com/SUGm57s.jpg?1

  I've seen non - Leap Motion want and it is similar, as you say. Really weird that it does not work, especially since you said that the fingerprint reader itself works. I hope you have better luck with the replacement!

• HP ENVY 17-j112tx Leap Motion: Overclocking my HP ENVY 17-j112tx Leap Motion SE Notebook PC (ENERGY STAR)

  Hey all,.

  My laptop that I liked for the time I got it, so a pretty good personal camera all-round.

  However as I just realized, the processor isn't quite cut. For these unfimilair with this product, it's Intel Core i7-4702MQ CPU @ 2.20 GHz. Which is decent except the Gigahertz.

  And as I came to learn, the BIOS Overclocking locked so my question to you is if I can overclock my processor in anyway eventually (even with a cost?). I'd give perfer to keep this laptop as it has a 16gbs of ram and a decent graphics card!

  Thanks in advance.
  Brock

  Hello

  My loan last year machine was a HP ENVY 17 t-j100 Leap Motion SE Notebook PC (ENERGY STAR) (t for machine CTO). My current loan machine is also a HP Envy 17 t wGen 5 CPU and best card NVIDIA but no movement of jump. They are great machines. But for overclocking, you need to buy any other kind of laptop, the Envy series will not support it.

  Kind regards.

• Will be taken in charge of HP ENVY 17 t-J100 16 GB Ram

  Hello

  I have 8 GB of ROM at the moment. I have a HP ENVY 17 t-J100 QE jump movement can go to 16GB? and what kind of Ram do need me? Thank you. K

  Hello

  Yes, it will support the 16 GB (2 x 8 GB modules).  An example of what you need are visible on the following link.

  http://www.crucial.com/USA/en/envy-17t-J100-leap-motion-QE/CT5172225

  Kind regards

  DP - K

• HP Envy 17 t-j100 Quad Edition: product number mismatch

  Hello!

  I'm about to upgrade to Windows 10 and have questions about my laptop.  By my initial order, the number of the product I ordered was E4S82AV, but the HP Support Assistant and the battery compartment that it is E1P14AV. When I touch E4S82AV in the issue of the product on the site Web of HP, no software or drivers are found. I have a matte screen, no touchscreen model.

  Can someone tell me the difference between these two products numbers and why the one I ordered does not appear to exist on the support Web site? It's not touchscreen touch vs?

  I fear that if I need software or driver updates, those under E1P14AV are really suitable for my system.

  For example, I had a problem with an update by HP Support Assistant on my CyberLink PowerDVD software failure (it finally updated OK).  He had several Softpaq SP70823 and this file already exists in my folder in C:\SWSetup.  I checked the support Web site, thinking I would try to download the software from there, but I don't see that listed as an option under E1P14AV sp70823.

  Thank you!

  Your Envy 17 t-j100 Quad Edition is a CTO (configure to order) machine that starts with a number of basic product which replaces a specific number of product once that order you with the card you want. Not sure about the DOWNLOAD - but not the first time neither model which has software missing from the support page.

• Envy 17 t-j100: ENVY 17 t-j100 games for 5-10 seconds all lag a few minutes/Bios Update issues

  I just bought this laptop rarely used a few days ago.  He had a clean recovery of Windows when I picked it up and I spent a few days in day and to learn to play well together (Leap movement, fingerprint sensor, etc.)  I've updated absolutely everything I could to the latest drivers and finally sat down to play games.

  Here's where my problems began.  I installed Skyrim and Portal 1.  Initially, I put the properties graphic high heat, since that is the recommended setting and tried to play.  The game started quickly and the graphics are superb.  I played for about 10 minutes and the video started trolling and I could hear the shift in the audio as well.  I stop, rebooted and the same thing.  I put the graphic quality for low on both games and still the same problem.

  I read that it is often caused by overheating, so I checked the cooling fans and vents and both are clean.  I also confirmed that all the fans are working.  I also read that this can be resolved by updating the bios.  I tried several times via HP Support Assistant and have so far failed.  It downloads, installs, flashes, restart, picking them up at the old version.  Very frustrating.

  I bought this camera as a desktop replacement that I am hoping to use for the moderate game.  I really hope someone can help me.

  System information:

  HP ENVY 17 Leap Motion SE NB PC

  F1J39AV

  8.1 Windows 64-bit

  Intel Core i7-4702MQ @ 2.20 Ghz

  16 GB of Ram

  NVIDIA GeForce GT 750M 2 GB

  2 TB HARD DRIVE

  I'm running it on current alternative, using the NVIDIA card exclusively and have every setting I can find High Performance value.

  Nope.  Off CoolSense, crank all the settings to ultra, even downloaded the HD texture pack and it works very well.  CoolSense was my problem.  I don't usually use it on a flat surface and I guess CoolSense wobbly.  HWMonitor to verify time and there was a NET improvement of cooling without CoolSense.  Thanks for your time, but this laptop is now shouting through games at high resolution.

• Quad edition of Envy 17 t-j100: replacement hard drive

  need to replace the disk hard drive serial # [personal information deleted] in my touchsmart Envy 17 t-j100.   Cannot afford to sata now.  Any suggestion where I can buy a compatible to the original.  This is a 1 to 5400 RPM.

  terfig wrote:
  

  ..... Cannot afford to sata now. ...

  Hello

  You MUST use SATA, no choice. You're probably talking about SSD. There are several standard HDD around. I bought one week last disk HARD next to test things-much cheaper elsewhere

  http://cplonline.com.au/hard-drives/laptop-hard-drives/2-5-Seagate-1TB-with-8g-MLC-Seagate-Momentus-XT-laptop-HDD-st1000lm014.html

  http://cplonline.com.au/hard-drives/laptop-hard-drives/Seagate-st1000lx001-1TB-laptop-sshd-w-32GB-NAND-2-5inch-SATA.html

  You can buy WD, Toshiba, Hitachi...

  Kind regards.

• HP Envy 15 t-j100: processor speed decreases when you play?

  Hi, I use a laptop HP Envy 15 t-j100, and I noticed that whenever I play games, my CPU speed drastically decreases of 3.3 gHz to 1.8 gHz. Can someone explain to me if this is normal or if there is any way to solve this problem? My cell phone is always set to maximum performance, and it is plugged. Thank you very much

  Hello

  Sounds like your machine getting warmer and warmer when playing games and it will stop without warning to the hot point. Please, try the following solutions:

  http://www.ricksdailytips.com/keep-laptop-cool-while-gaming/

  http://www.WikiHow.com/keep-your-laptop-from-overheating

  http://Electronics.HowStuffWorks.com/how-to-tech/how-to-keep-laptop-cool.htm

  Kind regards.

• HP ENVY 17 t-j100 Quad Edition: battery problem?

  According to the battery in the taskbar icon...

  "70% available (plugged in, does not support).

  UH... Why is he not supported 100%?

  Hello @paradive,

  Welcome to the HP Forums!

  I read your post on your ENVY 17 t-j100 battery does not charge and wanted to tender hand for you.

  The system shows the loading if you disconnect and then reconnect the battery power adapter? The question has just begun or occurred after an update or upgrade?

  You can start to test and calibrate the battery and review suggestions on improving the performance of the battery.

  If you haven't already done so, please make sure that you use the latest software and device drivers for your system.

  If one of my suggestions will help you to solve the problem that you are experiencing, please click accept as Solution so that others who may have the same difficulty can find the answer more effectively. Thanks again for participating in Forums of HP!

  Thank you!

• HP ENVY 17 Leap Motion SE NB P: SSD for PC HP ENVY 17 Leap Motion SE NB

  Hello there, I have HP ENVY 17 Leap Motion SE NB PC(), model description HP ENVY 17 - J161EA,

  The processor is Intel Core i7-4702MQ CPU @ 2.20 GHz

  RAM is 12 GB

  and the hard drive is 1 Tera Byte

  I want to add SSD addtonally to improve performance, could you please recommend compatible combinations for that or direct links to where I can buy?

  then is it possible for one SSD boot? I use windows 10. All links will be useful.

  Thank you for your continued support.

  concerning

  Here is the Manual:

  Repair manuals

  See p. 40-42. There are two hard drive bays. You have a 1 TB drive 5400 RPM in one and the other is empty.

  All you need to do is get an SSD. I recommend the Samsung Evo 850:

  http://www.Amazon.com/Samsung-2-5-inch-internal-MZ-75E500B-am/DP/B00OBRE5UE/ref=sr_1_2?s=PC&ie=UTF8&QID=1447200423&SR=1-2&keywords=Samsung+Evo+850

  You need this second adapter bay:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=577

  Move the old primary hard disk in the second Bay and the SSD in the main Bay. This will start since the SSD drive. You can make a Windows recovery disk and use it to install Windows on the SSD. Post back if this is not clear.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Want 15t_j100 Quad E2E34AV Ed: 10 Windows upgrade failed - blinking display of Envy 15 t-j100 Quad Edition Notebook PC

  Upgrade Windows 10 failed on my Envy 15 t-j100 Quad Edition laptop.

  Symptom after upgrade has been a video exhibition quickly flashing without control of the PC.

  I have to go back to the previous version - Windows 8.1.

  Back with success on Windows 8.1

  Symptoms point to video card problem after updated Windows at level 10.

  My laptop has two, provided by HP online:

  Intel HD 4600 Grapics (internal)

  NVIDIA GeForce GT 740M

  See the research, that Intel and NVIDIA have Windows 10 drivers for these graphics cards.

  Yet immediately when Windows 10 signing after upgrade, the laptop display has been viewed quickly.

  The only way I could get control of the laptop was CTL-ALT-DELETE to start the Task Manager.

  The Task Manager showed that more CPU resources would "host setting synchronization process.

  Called Microsoft Support - they indicate a likely problem with display adapter driver and advised to "go back" and then contact HP support.   called HP Support and they advised to work with Microsoft.  Great!
  
  Would appreciate recommendations on the way forward for Windows 10.

  Dgood43 wrote:
  

  Initially I found the 10.18.13.5324 Rev.A-NVIDIA graphics driver.

  I was allowing the HP site automatically detect my curent - Windows OS 8.1.

  When I manually switched OS Windows 10, I see it listed.

  I also see 10.18.15.4248 that place listed for the Intel HD 4600 graphics card.

  Can I install both of these drivers before you upgrade Windows 10?

  Both are supported on Windows 8.1?

  If so, why HP Support Assistant would not have install me the upgrade?

  Am I missing something here?

  Install only the softpaq grahips from Nvidia. It will allow to install the two drivers.

  When I click on the button 'Download' blue, it offers two choices:

  Use HP download and install the Wizard (recommended)

  Download only

  This is the second option that you recommend when you say to use "usb flash drive support? Yes. Create an installer of Flash 10 Windows usb player. This is the second choice option.

  Thanks again for your help!