HP ENVY 17 t-j100 Leap Motion QE CTO Notebook PC space bar does not

Similar Questions

• Optimus in HP ENVY 17 t-j100 Leap Motion

  Hello, I have a HP ENVY 17 t-j100 Leap Motion QE CTO Notebook PC (ENERGY STAR) with optimus technology.

  Can I disconect the optimus technology and use only the NVIDIA card?

  Hello

  The short answer is no.

  On your system type, the gpu from Intel is always used to render the view final, regardless of whether the discrete Nvidia chip is used for the treatment or non-graphical.

  For more information on the functioning of this type of "Switchable" graphics technology, see the white paper at the following link.

  http://www.nvidia.co.UK/object/LO_optimus_whitepapers.html

  Kind regards

  DP - K

• ENVY 17 t-J100 Leap Motion: keyboard backlit ENVY 17 t-J100 Leap Motion edition shuts down after each power down.

  My brother has an ENVY 17 t-J000 Quad Edition. Only about 6 months. Its backlit keyboard remembers its state of on or off when it reboots or off. When he turns on his laptop back, the keyboard is always if it's him on when he turned off the laptop.

  I just got the ENVY 17 t-J100 Leap Motion backilt keyboard edition. But every time that I reboot or shutdown with the backlight on, it is turned off when I have the laptop or reset. So whenever I have to re - turn on the backlight. Very annoying.

  Anyone else with the jump movement 17 t-J100 having this problem? If so, I hope it's fixed soon. I also can't update the Nvidia drivers then perhaps we need a BIOS update to solve these two problems.

  I just checked to be sure. It turns off if the laptop is turned off and turned on then again - but if I just restart the kbd is running.

• HP ENVY 17 t-j100 Leap Motion QE Notebook PC Port HDMI highest video resolution

  What is the maximum video resolution that can be supported with the HDMI output of the GeForce GT 750 M graphics card? I get a new "HP ENVY 17 t-j100 Leap Motion QE Notebook PC (ENERGY STAR)" as a guarantee of replacement for an older PC and new PC has only a HDMI connector for an external monitor. The GeForce GT 750 M graphics card will come with 4096 MB memory installed in it. I considering buying a series ASUS PB278Q LCD monitor and would like to know if its resolution 2560 x 1440 WQHD input is supported by Geforce GT 750 M graphics card. The entrance to the Asus monitor is HDMI version 1.4. As I understand it, if the PC's HDMI output is version 1.3 or later, it should be able to handle up to a 2560 x 1600 resolution monitor.

  I received my replacement 'HP ENVY 17 t-j100 Leap Motion QE Notebook PC (ENERGY STAR)' PC and found that I was able to use my monitor 27 '' Dell in its resolution full 1920 x 1200 with a HDMI to DVI cable - D. The cable I used was an AmazonBasics HDMI to DVI adapter cable (9.8 feet/3.0 meters), I bought from Amazon.com for $7.99, http://www.amazon.com/gp/product/B001TH7T2U/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1. I still have not been able to confirm the maximum resolution that can be financed by this PC, but either I have to upgrade to a new monitor because I can use my existing at its full resolution.

• Install the latest Nvidia drivers on ENVY 17 t-j100 Leap Motion with 750M video, need help.

  I went back to the ENVY 17 t-j000 about 6 months ago because I could not install the latest Nvidia drivers. My brother has this laptop and after a few months, HP made an update of the BIOS and now it is able to install the latest Nvidia drivers very well.

  So I decided to try again the ENVY 17. This time, I had the model Leap 17 t Motion - j100 with 750M versus the graphics of 740 M.

  I downloaded the latest drivers from Nvidia and actually installed Nvidia. Rebooted and everything seemed fine. But he wouldn't let me not use the Nvidia Control Panel, because it seems that the screen was not connected to an Nvidia GPU.

  So I tried to install it again and choose the Clean install option. But to say question.

  Then, I did a complete uninstall of the Nvidia drivers and rebooted. Now when I try to install the Nvidia drivers, he says that does not find any compatible hardware. I did it today with the same single download from Nvidia. I don't know why he has installed two times before without any error and now it says that I don't have an Nvidia card.

  So TWO things:

  1. download the latest version of the driver reinstalled again.

  2 fix the error "No Nvidia GPU not attached" when you try to use the Nvidia Control Panel.

  I have all the latest Windows updates and updates from HP. I don't see the BIOS updates. Any ideas?

  As of today, I am able to install the latest drivers Intel and Nvidia available:

  • Intel provided HD 4600 driver version date 31/10/2013 10.18.10.3345 - via manual update disk, not the .exe installer method.
  • NVIDIA provided WHQL certified version release date 07/01/2014 332.21 (332.21-notebook-win8-win7-64bit-international-whql.exe file name), said driver 19/12/2013 - quick installation, normal use date Nvidia installer.

  Both these installed just fine and work perfectly together at the moment.

  I hope that latest drivers will continue to install and work together as new drivers come out directly from Intel and Nvidia.

  I'm just happy that I finally have two of the latest possible stable drivers.

• ENVY 17 t-J100 Leap Fingerprint reader seeing Motion?

  My brother has the motion of non-saut ENVY 17 t-J000. And he has a LED indicator to the left of the sensor fingerprint that lights in white or orange when you drag your finger. Which is really nice to know that it has detected your finger when you think that nothing is happening.

  But I just got the Motion Leap of his laptop computer version, and I don't see any LEDS light up when I slide my finger. The sensor works well though.

  So my question is, can confirm one that this model has or that there is no LED indicator as the motion of non-saut feel LIKE? I don't want to lose time to call HP if this model does not have the LED indicator. But if he does, I need to have the unit repaired or replaced before I get it all together at the top.

  Weird that it is not displayed, here's an imgur link, in case you still want to see

  http://i.imgur.com/SUGm57s.jpg?1

  I've seen non - Leap Motion want and it is similar, as you say. Really weird that it does not work, especially since you said that the fingerprint reader itself works. I hope you have better luck with the replacement!

• ENVY 17 t-j100 update Select Edition CTO of Touchsmart screen?

  Is it possible to upgrade the ENVY 17 t-j100 Select Edition CTO to a Touchsmart screen and if so, any idea what it would cost?

  Hi @Xoxcatpl ,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.

  Kind regards
  George

• dv6 7309tx wanted: HP ENVY DV6 7309tx BIOS update after the corrupt bios, SP68425 F.2D does not work

  The problem began with a blue screen after the updated copy on the road on machine of internal to external hard drive...

  After the reboot, the screen went white and CAPS LOCK has 2 flashes

  Device: HP dv6 7309tx envy

  Current BIOS: 22/01/2013 F.24 / 181E

  Downloaded SP68425 with F.2D since 08/2014

  insydehflash.exe in the package on a spare computer (no HP) does not support the extraction to USB, I will need to update the bios on device dead...

  Device is now in HP PC Hardware Diagnostics UEFI, where I can add usb and start to update...

  However, the raw after extraction of sp68425 bin file is not accepted...

  and I can't go any further with the tool insydeh sp682425 because it does not allow me.

  There is no real BIOS option the last update on the HP support who is crazy enugh...

  F.2d

  FTP://FTP.HP.com/pub/SoftPaq/sp68001-68500/sp68425.html download: ftp://ftp.hp.com/pub/softpaq/sp68001-68500/sp68425.exe

  Please help to send me the appropriate files or explaining how I can generate in a different machine than the one update has no boot?

  Thank you

  Hi all

  If the solution was done by a kind shop in Hungary, http://reballing.hu

  and a specialist in firmware http://vinafix.vn

  So apperently my BIOS has been corrupted that CAPS lock sign showed and it could have been rewritten with HP Diagnostics if HP could provide the RSA key for her...

  In this case it is not provided, you don't have that one other solution, to find a nice (as reballing.hu) repair shop, where the guys are nice enough to disassemble your computer, take the chip and write the data without the requirement of RSA software HP Diag using a writer BIOS correctly. You can also buy writers of the bios and the tools, but he could be uite costly and risky for you to do...

  So you have a repair guy, the only other thing that you might need to trust is the dump of the BIOS correct, please note that the supplied with the softpaqs .bin file is encrypted, so it must be decrypted, it is not an easy task, it worked for me too after awhile, but better to find a provider of bios (saves time for you as well and that is why HP is not willing to give it to you, you have two choices: make a work computer, and read the bios in this way (you must have the identical chip and content, so preferabily the same card mother or product)

  Or go to www.vinafix.vn and ask them to provide you with, these people are kind enough to explain how the thing works and what you need to write your own return data.

  So once that you set is not more than 30 minutes for a handy guy and as they work at the time, it is fairly cheap as well, it cost me 25 USD total (10 for bios) and 15 for the actual work done

  It's a shame that yu can not really find information about this threat, and also that it can happen to your computer at any time it seems that, always in waiting to see what caused, and if she came back or not... but as of now, I am pleased that the computer is back on!

• ENVY of HP dv6-7300ex Notebook PC: Wi - Fi does not work on battery mode

  Hello

  Good evening everyone,

  I have a problem with connecting Internet using Wi - Fi connection. When I use the battery mode, the internet connection does not work. However, when I plug the cable into electricity, it works very well without any problems. The computer shows me that I am connected to WiFi but when I try to go to some Web sites, it does not work.

  The original operating system is windows 8 and now I've upgraded to windows 10. However, the problems is not in the two operating systems.

  Thank you very much.

  Hello

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your computer problems with WiFi and laptop dv6-7300ex of HP ENVY staying on when the battery mode. Here is a link that shows you how to change options in Figure 19 of the link allowing the hybrid sleep.

  It shows the battery options and you can check what power plan options on this moment, you are. Balanced is always recommended with laptops.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  I hope this helps.

  Thank you.

• HP ENVY 17-j161ea Leap Motion TS SE Notebook PC - internal 2 drive Bay

  Hello

  There is a 2nd, empty, a drive inside this laptop Bay.

  However, it came not with a cart or a connector for this 2nd drive Bay.

  How can I get this wagon equipped with a connector.

  Thank you.

  You can buy it here:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=542

  HP provides only on models where they provide 2 discs.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Add second HARD drive to HP ENVY 17-j171sa Leap Motion TS SE Notebook PC

  Hello

  Recently upgraded to SSD as HDD1 in my notebook using cable sheet etc. of 'newmodeUS '.

  All the stable and works well, so I installed a second HDD (which I know works well) but the laptop does not see.

  I even installed the drive HARD original as HDD2 but same problem

  I cannot find any relevant info on diagnosing this problem, but I was wondering if this model (jump movement) may have a second internal HDD

  I don't see anything in the BIOS on this topic

  A point to note is that I had to remove a plate of maetal that was installed in the drive Bay HDD2 - possible is not designed to accept?

  Thank you

  Following my last, next time I checked the disk Dirves in Device Manager, there was my Toshiba 1 TB as well as the SSD.

  Quick format in humans of disc and it is in place and works very well!

  Not too sure what happened here, I left the disks with the cables 'Swapped' in place and just to prove that everything is OK I swapped the cables back again an everything is OK (the original cable is now in HDD1 port with the SSD and the NewmodeUS cable is HDD2 port with the other disk from Toshiba.

  So now I can use my 1 TB of extra storage as well as storage faster SSD - Hallelujah!

  I also always the player original HGST I cloned the SSD at and could use again if the SSD fails or corrupt.

  Thanks to all who have helped me on this one

  Robert

• HP ENVY 14 Notebook SPECTRUM: USB 3 does not

  Hello

  HP Envy laptop

  Product number: A7U17UA #ABC

  Win 7 Pro (64-bit) SP1

  BIOS: F.06

  When I plug a USB 3.0 device on my USB 3.0 port I get a BSOD every time.

  I tried the hubs, external HARD disk (self powered and powered versions of bus) and get the same result every time.

  These 3.0 devices work with other computers.

  I removed all the USB drivers using the Device Manager and rebooted.

  Windows reinstalled the drivers.

  No luck, same problem

  Do I need special drivers for this?

  Please let know us if there is a solution.

  Thank you

  Hi @jbehara,

  Thank you for your update.

  HP has been informed of the situation and is working to correct.

  If you do not want to wait for the driver page is available to check, please contact HP support for assistance.

  Contact HP to Contact HP Support assistance

  Good luck!

• HP ENVY 15 Notebook PC: Wi fi does not

  Hello

  My Wifi is not working properly when starting. The F12 remains orange and driver information not available in 'change the adapter settings' as control panel.

  But wifi is to operate only on "restart" and not even to stop it and start again.

  Details of the laptop:

  Model: HP ENVY 15 PC laptop 15j-130Tx

  OS: Windows 8.1 64bits

  Hi @DM300 ,

  I would go into Device Manager and uninstall all the drivers for the network card and reboot the laptop. It will install the driver.

  Here is a link to the HP Support Assistant, if you need it. Just run the application and it will help with the software and drivers on your system, as it has a Wizard installed in wireless.

  I hope this helps.

  Thank you.

• Progress bar does not appear motion

  I have the attached class that extends from box and adds a ProgressBar to the area. When I created this as a MXML component, it worked fine and the movement of progress was displayed properly. However, when I converted it to a class AS, the motion is not displayed. Any ideas what's not here?
  
  Thank you.

  If someone else out there he cares, here is the solution. I added an event listener for the event creationComplete of the constructor to set the status of the indeterminate progress bar.

• ENVY 15-k008ne Notebook PC: my laptop does not completely turn off

  Hello

  When I have shutdown/Hibernate / standby my laptop, it will turn off completely.

  All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

  And when I try to Hibernate, everything is ok, but I have the same problem.

  Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

  After manual turn off, when I turn it on again, everything works correctly:

  -If hibernation: OS will continue to last situation.

  -If stop: OS works normally without error or warning.

  After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

  Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

  Is there a parameter/software to check and fix my problem?

  Thank you

  Hello

  Try the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

  When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.

  https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-nu...

  Once the installation is complete, restart the laptop.

  When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

  Kind regards

  DP - K