Options to start windows 7

Similar Questions

• BSOD on all options after starting windows updates running.

  I ran the windows updates last night I shut down my computer.  I remember it being about 12 updates to run.

  Windows Vista, 32-bit

  This morning, I rebooted my computer and during the loading sequence, updates continue (the non-graphical part) and then I got a BSOD.  I tried to run all the security modes and got the same message.

  I ran repair my system disk and got the message that he could not repair the version of windows.  I tried a system restore, but it said I had no save points.

  Is there a way to manually tell it that updates have been an uninstall from the reapir vista disk command prompt?

  The specific the BSOD error code is
  0x0000007E (0xC0000005, 0x8264CB56, 0x803998CC, 0x803995C8)

  Any help which is not one of these answers canned that has a bunch of stuff I can't do since I can't on something else that the ERD would be useful.
  Thank you!

  In the end I solved it me - so if someone runs into similar codes - here is the summary:

  I ran Windows Update.
  On reboot the part of the update that runs in non-graphical mode full - then crashed by the computer.
  I got BSOD screens whenever I tried to boot in any mode.
  The specific error code is 0x0000007E (0xC0000005, 0x8264CB56, 0x803998CC, 0x803995C8)
  I tried the repair disk installation process - which could not find anything.
  I couldn't do a system restore point, because they were all gone.
  I called Microsoft - they were very nice, but their only solution was to re - install which was not possible for me.
  I downloaded and created a boot cd on another computer that could run antivirus software.
  The disc has been call BootCD Secured2k - there is a forum on the Mcafee site about this.
  I used it and found a Patched - atapi.sys trojan that he removed from the case.
  (Reading between the lines - this thing has been disrupted by the Microsoft Update that caused the mess)
  Then I got a new problem starting with the error code: 0x0000007b 0x80399bb0
  Same problem of being unable to boot in any mode.
  Same problem of being useless installation disc repair.
  After leaving it for a few hours, it occurred to me that perhaps when atapi.sys, that Trojan has been deleted the file was so.
  I connected the command line available from the installation disc advanced repair options.
  ATAPI.sys had indeed disappeared.
  I used the X:\windows\system32\drivers\atapi.sys and copied on my C:\Windows\system32\drivers.
  And presto! -my windows starts with happiness and everything seemed to work.
  (Why can't notice of repair of microsoft one missing disk or messed up file atapi.sys?)

  Unfortunately a few days later I noticed the Windows updates not working and I couldn't go even this part of the site.
  I tried everything I could think of and failed.
  So I called Mircorosoft again.
  We spent an hour on the phone and they found the problem this time!
  I used OpenDNS as my DNS provider for performance of problems caused by Time Warner.
  For some reason any OpenDNS blocking any attempt on my end to reach the Microsoft Update sites.
  I went from Microsoft recommended DNS and my computer was happy again.
  Everything has been happy since.

  And just to prove that I learned my lesson - I bought Norton Ghost and tries to configure full backups regular since the system restore point says that it don't work for me (I have a vista upgrade a XP Home machine on a FAT file system)

  So:
  Secured2K bootable anti-virus CD (and you can run other analyses of viruses such as PA recommended wear)
  If ATAPI. SYS is removed or bad - I copied it from the disc command prompt install.
  If you Microsoft updates stop working and you can't reach their windowsupdate.microsoft.com - check your DNS.

• I'm unable to start windows xp.

  I get in the options to start windows normally or SafeMode etc, but cannot change the options "start normally.  I have for the suspense account reduced, tries to start, then resets.  Keyboard works if I use F8 or siilar, but the arrow keys do not work. Tried xp install from CD, but even once, the keyboard does not allow me to do anything, when it says press the key to continue... nothing happens.

  Fri @ 03:30 dropped to oem repair center
  Mar @ 05:00

  @ I was exspecting a hard drive dead

  They replaced;

  CENTRAL PROCESSING UNIT
  Keyboaed
  and more important 2 tons of FUR!

  I can't be mad BSOD when I used a laptop
  as an air purifier

  The photo on this account REF
  I BLAME

  Operating system reinstalled to the repair center

  66 mat installed updates 4-times (work)
  Reinstalled and updated office

  I rely on forums like this to help

  Thanks for being here

  should change my profile picture and asked him

• Computer stops responding with a black screen when you start Windows XP. Cannot select anything advanced startup options

  Original title: can't open Windows
  I can't open my laptop at all... block when I select anything in the mode without failure or screen black normal mode :(
  What should I do? Thank you!!!

  Hi Mihou,

  1 have. what changes you made before the question?

  2. What are the options you see in the advanced startup options?

  You can follow the methods in the article in order to solve the problem.

  Computer stops responding with a black screen when you start Windows XP
  http://support.Microsoft.com/?kbid=314503

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• my laptop keeps going to start page.__No regardless of which option to choose, that is to say. safe mode, safe mode, safe mode with command prompt, the last known good configuration, start windows normally, it's always the same

  my laptop keeps going to the start page. No matter which option I choose, IE. safe mode, safe mood with networking, safe mode with command prompt, last known, good configuration start windows normally, it always comes back to the same screen. saw this post before and the invloved boot cd solution. I have not a cd ROM is there another way to solve this problem. Thank you people

  Thank you for taking the time to make this post very informative, excellent. Without the machine test myself that I can't be sure, but based on the age of the computer and what you wrote I suspect for lack of material. It could be something simple like the hard drive or RAM or something more serious like the motherboard. I wouldn't recommend replacing any material on such an old laptop.

  As long as the hard disk has been physically, you can recover your data easily. If the hard drive has failed, then you will need to send the drive to a professional drive savers data recovery company. It is quite expensive ($500-3700), but they can usually recover your data. Some insurance policies cover also, professional data recovery in order to check with yours. But let's be optimistic. ;-)

  IMPORTANT - If there is no question that the drive is at fault - there are noises, for example - and the data is crucial NOTHING else ON THE DISC. Whenever launch you this player you can destroy data. If this is the case, send the drive to a professional data recovery company.

  I'll give you the information on how to test the hard drive to see if it's good physically and how to recover data when you can't in Windows but in doing these things requires a certain level of computer skills. You know yourself the best and that it would be better to take the laptop to a competent local professional. If you do this, do not use a type of BigComputerStore/GeekSquad of the place. Get recommendations from family, friends and colleagues.

  A. test equipment
  
  Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. You will probably need to change the boot order. Your Dell can give you a temporary boot menu if you press F12 as the computer starts. If so, use your arrow key to select the CD drive. Otherwise, press F2 to enter in Setup (BIOS) and change the order of boot on the CD drive first. If the disk fails all physical tests, it must be replaced. Although readers of the laptop cost around $60, you should really consider if it is to put money in such an old machine. You can replace the disk, but the laptop is definitely at the end of its normal life and something else is doomed to failure.

  There is information about the RAM test and other materials here:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  B. retrieve data detach a healthy disk when you are unable to Windows
  
  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, which is an engraver of CD/DVD OR a USB stick with a capacity to hold your data OR an external USB hard disk formatted FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  C. recovery of activity for the future - http://www.elephantboycomputers.com/page2.html#Backing_Up MS - MVP - Elephant Boy computers - Don ' t Panic!

• Windows does not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally

  Original title: battery

  When the battery dies on Windows 7 Home premium, what makes the look of the laptop screen as to everyone with the same computer? (IE black, dim and then black, dim and white and then black, Sun & blue, etc.)
  And you always get the "Windows did not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally)" Note?

  It could be a hardware problem, so it is best to contact DELL or a local technician if the problem persists.

  As a work around, I suggest to update the drivers of the computer display and check if it makes a difference.

  Download the drivers from http://www.dell.com/support/drivers/us/en/19/Product/latitude-e6410

• I have a new computer system and creative Photoshop Cloud has been removed. In my window out yhe cloud-app I only see the option to start a trialversie but I want to have a normal version because iI paid for it. How can I start Photoshop on my n

  I have a new computer system and creative Photoshop Cloud has been removed. In my window out yhe cloud-app I only see the option to start a trialversie but I want to have a normal version because iI paid for it. How can I start Photoshop on my new system?

  Hello Clemens,

  On your Adobe ID on the forums, there is no subscription for creative cloud, please make sure that you are connected with the good email your see Creative Cloud App links below:

  Connect and disconnect activate Cloud Creative applications

  Using creative cloud | Applications creative Cloud back to update evaluation Mode to 2015 CC

  Let us know if that helps.

  Kind regards

  Bani

• Bootcamp partition extended, now cannot start Windows

  Hi all, hope you can help. Running Windows 7 on Bootcamp partition. OS X El Capitan 10.11.5 on the other side.

  Needed to make Windows larger partition to install away from port, although comments, not sure that all this pain is worth it. That's what's happened so far:

  1. I enlarged the Bootcamp using disk utility partition

  2 restart the computer and now the Alt key, I could not see the usual option to start the Windows partition.

  3 then I read that I had to go to the preferences system and make my boot drive Bootcamp, I did.

  4 but on reboot, I get the error message "no boot device - insert the diskette and press any".

  5. isn't a step 5. The hope that you could help me find one.

  Thanks in advance for any wisdom.

  How to enlarge a Boot Camp partition is either:

  a. assistant Boot Camp use to remove Windows and refer the reader to a single partition. Then reinstall Windows using Boot Camp Assistant by specifying the size of Boot Camp, that you need for now.

  b. use CampTune, a third-party application, to resize one already set up to the Boot Camp partition.

• Start Windows after the backup time machine!

  Hey guys

  I have a MacBook Pro MGXA2 and I used time machine for the first time for the backup of the stuff, but after completing the course, my Windows boot option missing from the start menu

  Now I have MACINTOSH HD and a new option named: option to START EFI!

  in disk utility, I have a Macintosh HD and BOOT CAMP

  boot camp disk is always seen in utility dish! I have many pic in the bootcamp drive

  now the questions:

  How can I access inside the car of bootcamp to retrieve my files from disks in windows?

  is it possible to bring back the old windows boot camp player option to the boot menu?

  Thanx

  Welcome to Apple Support communities

  1. You can access your Windows partition with Finder. Simply open a new Finder window in OS X and the access to your Windows partition (often called "BOOTCAMP").
  2. Out of curiosity, what happens if you choose 'Boot EFI'? Note that newer Macs run Windows in EFI mode, so maybe Windows still works.

• Cannot start Windows 10 (Partition exists in the startup disk)

  Right, I accept all first I did something stupid - I resized a partition. I resized my Mac OSX Partition but not changed the Windows/BOOTCAMP Partition. My MBP has no DVD/CDROM drive. OK with that of the road, I have browsed these forums for centuries and can not find how to re - add the partition to the boot sequence. All files etc are in the score, and it is an option in 'Start Up' disc. It is not just show when booting with the down option. Orders/Info added on similar topics:

  diskutil list
  /dev/disk0 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *500.3 GB   disk0
     1:                        EFI EFI                     209.7 MB   disk0s1
     2:                  Apple_HFS Macintosh HD            330.2 GB   disk0s2
     3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
     4:                  Apple_HFS Untitled                24.1 GB    disk0s4
     5:       Microsoft Basic Data BOOTCAMP                145.0 GB   disk0s5

  sudo fdisk -e /dev/disk0
  fdisk: could not open MBR file /usr/standalone/i386/boot0: No such file or directory

  diskutil cs list
  No CoreStorage logical volume groups found

  sudo gpt -vv -r show /dev/disk0
  Password:
  gpt show: /dev/disk0: mediasize=500277790720; sectorsize=512; blocks=977105060
  gpt show: /dev/disk0: PMBR at sector 0
  gpt show: /dev/disk0: Pri GPT at sector 1
  gpt show: /dev/disk0: Sec GPT at sector 977105059
        start       size  index  contents
            0          1         PMBR
            1          1         Pri GPT header
            2         32         Pri GPT table
           34          6       
           40     409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
       409640  644830816      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
    645240456    1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
    646509992   47131224      4  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
    693641216     262144       
    693903360  283201536      5  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
    977104896        131       
    977105027         32         Sec GPT table
    977105059          1         Sec GPT header

  Other points

  • If I try to use 'Start Up' drive to restart Windows, it does not work, I just get a black screen.
  • Due to the configuration that I can't really afford to reinstall everything on a new partition I would everything white / software installed, install Windows 7, upgrade to 10, reinstall various licenses etc, it would take me 2 days and my schedule does not allow for this.
  • I went through many discussions of the forum here: my background is software/web, no hardware, so the command line is a bit strange for me, but I can follow the instructions I have not successfully updated my "products" but I'm still on a MBP of the retina, the current captain.

  Please help me get out of a mess in that I have unintentionally! Thank you!

  I finally found this answer of the LonerT who fixed this issue for me https://discussions.apple.com/message/29579529#29579529 thank you!

• Equium L20 - cannot start Windows mode of

  Hello

  I was wondering if you can help me. I have an Equium L20 - 197, windows xp home edition. (Also technically challenged!  :)) When I booted my computer laptop first time today, I received this message-

  «We are sorry for the inconvenience, but windows did not start successfully upward...» »
  and he gave me a few methods of commissioning:
  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last good Configuration know (your most recent settings that worked)
  and
  Start Windows normally

  I was able to start press start windows normally and start the computer very well. I turned off the computer OK, then it was restarted later without any problems. I then restored in a frame earlier that the system did not work well. Restore seemed to go OK but then my computer froze, then were shut down by pressing the power button.

  However, the laptop will now not reboot. Just as I think it starts it goes to the error message and none of the options will work to start the computer, and I am now stuck on an endless loop of the above message.

  I don't want to use the product recovery disc, that he will wipe away all of the hard drive and I have the info I need access to! I have a recovery CD product for a Fujitsu which has windows xp edition family sp 1 on him. Is it possible that I can use this to start my computer or is there something else I need to do? I thought after pressing F12 and if it is possible to use the other drive Fujitsu to launch boot my system but do not know if this is possible. I don't have an xp disk from toshiba installation disc, when I bought the computer. :(

  I learned by a guy from the computer to the phone that sounds as if I need a new hard drive but would like to explore other methods before you go this route.

  Thank you very much in advance for any help you can give me. Susi

  Hi SusiB_1,

  Unfortunately, if you can start Windows t in any of these modes you have only one option and that is reinstall Windows. I mean you should do? You can do anything in this case

  As you wrote wipes disc, the whole HARD disc Toshiba Recovery and that's right because it of needed to recover to factory settings. But normally you should have a backup of your data or not?
  If this isn't the case, you can access the data, if you put the HARD drive into an external HARD drive enclosure. From another computer, you now have access to these data.

  By the way: for Toshiba recovery disc you n t need a product key. Everything is already done in the recovery image and no activation is necessary. :)

• Satellite A100 - starts Windows

  Without changing anything, my Satellite A100 starts Windows.

  A screen with Windows foutherstel (failure recovery) gives two options; Start windows normally and start recovery. When I push the first option, there is a quick blue screen, which disappears too quickly to read the music. Finally the resumption of failure screen comes back. in the alternative, there is a system that is said; Recovery Options screen It cannot start the program installated. Click Ok to shut down the computer.

  How can I solve this problem?

  Hi hans_3,

  Maybe something has confused the Windows registry or some important system files and thus, you can t more to start Windows or start the system repair option.

  I think in this case it of necessary to reinstall Windows. Therefore, you can take the Toshiba recovery disc that brings your computer back settings factor o where all the drivers and tools are already installed but it erases the entire HARD disk.
  It only takes a few minutes and needs just a few clicks.

  Good luck! :)

• Tecra S5 - Black display after starting windows XP

  Hello
  I had problems with the display driver last month after the new update, the driver of the original view was gone.
  After some restorations of older versions the screen worked, but not with the original display driver. I was Born the driver on the laptop and the character to install this new, but something is wrong.
  When I start the PC, the bios password is ask, filled, windows XP is started and the screen is dark without courier. Look of the screen reader does not start automatically to start Windows XP.

  What can I do? Only option work you the PC recovery CD?

  You can start a computer laptop properly using SafeMode (F8 at startup) option?

  What can you do?
  In my opinion, you have only two options: to install the Toshiba display driver or install the new OS by using the original recovery disk (radical option but it is better).

• Satellite C660-1FS - error starting Windows 7

  Hello to everyone. I have this laptop with Windows 7 Home Premium (no data by purchase of installation disc). Since this morning, I feel the following message/problem

  Windows error recovery

  Windows could not start. A recent hardware or software change might be the cause. If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem. If the power was interrupted during startup, chose to start windows normally

  Start the reboot system (recommended)

  Start Windows normally

  These two options do not work. In addition, Windows cannot enter Safe Mode. I live in Belgium and I don't know what to do. I will try with windows 7 installation disc a friend (from Dell laptops) or should I contact Toshiba?

  Thanks in advance

  When you start your notebook F8 press to display the advanced startup options.
  You see here option called fix my computer?

  It must be in the first place on the top of the screen.

• Help! Cannot start windows

  My 3000 Satellite will not start. It displays the message "windows is not start because the following file is missing or damaged.
  \WINDOWS\SYSTEMS33\CONFIG\SYSTEM
  He then told me to try to fix the problem of windows startup by using the original installation CD, but I can't do that provided laptop computer with windows XP THAT is already loaded.
  Can anyone offer any help?
  Thank you
  Bob

  You must use your recovery disk which all laptop should come with, this disc will start your comp and give you options i.e. windows repair, so if you have a recovery disk you are ok, otherwise you're not and I don't know what to do if you do not have. !!!