Oracle 12 c on RHEL 7.2

Similar Questions

• Installing oracle 11g (RAC) on RHEL 6

  Dear all,
  
  
  Me and my team will install oracle 11g (RAC) on RHEL 6.
  About mention above I have little doubt it please help me out in this matter.
  
  In the network section.
  
  Requirement of intellectual property:
  
  1 public IP address
  2 private IP
  3. virtual IP address
  
  Suppose we have two interfaces in each server, eth0 and eth1.
  
  I put the public IP address in eth0 192.9.25.100 and private 10.79.1.100 eth1 IP address
  Now where put the virtual IP address and what is the procedure.
  
  Please help me to set the virtual IP address
  
  
  Thanks and greetings
  Yvon Das
  S/n, Guwahati
  
  Published by: Yvon on 23 May 2013 23:44

  Hello

  See the message below:

  http://www.Oracle-base.com/articles/11g/Oracle-DB-11gr2-RAC-installation-on-Oracle-Linux-6-using-VirtualBox.php

  If you need clarification update here.

  Thank you
  A H E E R X

• Installation of Oracle 10 g on RHEL 4 vmware

  Hi all
  
  I try to install oracle 10g on RHEL 4.0 which is in VMWARE. RHEL has been installed successfully with the 30 GB filesystem, tmp 600 MB of space, 2 GB swap space and 1 GB of RAM.
  When I run the Setup oracle error thrown this space not enough time or cannot write to tmp.
  
  Please help me to solve this...
  
  concerning
  Sunil
  
  Published by: sunilkrishna on Sep 29, 2011 16:07

  Have you tried the below

  $ mkdir $HOME/tmp
  $ TMPDIR = $HOME/tmp
  $ export TMPDIR

  Start the installation after you set the tmp directory to point to a different location.

  You have mount with ACL on points, as Oracle does not like the ACL. If so, I you suggest to raise the temperature with "noacl" and then try to perform the installation.

• No oracle support for oracle 10g RAC on RHEL 5.3?

  Hi all
  I have no oracle support. I need this information juice to my knowledge.
  could you get it someone please let me know if oracle supports Oracle 10 g RAC on RHEL 5.3?
  or on any version of RHEL 5.
  documentation on tahiti has no mention of RHEL5.
  
  Thank you
  Arvind

  Both Oracle 10 g 2 and 11g RAC are supported for RedHat Enterprise 5 on versions 32 and 64 bit. It's really some information that should be available outside metalink (for people like you who are not yet customers).

  Hope this has helped
  Bjoern

• Laptop supporting Oracle 10 g on RHEL 4 Update 2

  Hello
  
  I am struggling to find a laptop supporting Oracle 10 g on RHEL4 update 2. If the HCL Redhat shows some laptops... those are all outdated.
  Now I find phones supporting the workstation RHEL 5 version. Is Oracle 10 g, taken in charge by this version of office? Kindly help me to find a laptop for personal use.
  
  I'll even though it is Dual boot with Windows Vista / XP but who also want to if ensure that he takes in charge the OS as well. Please help me find such a laptop computer!
  
  [PS: the search for an alternative other than VMWARE Windows]

  I have a Dell Latitude D830 running Oracle Enterprise Linux 4.5 and 5.2 very well. OEL is equivalent to Red Hat Advanced Server in the same version number, so I don't expect a problem.

  Since I also run several different fedoras, OpenSuSEs and Ubuntu on this machine, I suspect that the D830 also workstation Red Hat.

• Install Oracle 11g R2 on RHEL 6

  Hello

  I'm trying to install Oracle 11 g R2 on RHEL6 using VM Ware workstation. I went through all the controls preinstallion and now want to create directories to hold the oracle software.

  My UNIX box has only one primary partition which is the root partition (/).

  Now the Oracle documentation on installing LInux say the following commands must be executed.

  # Pei mkdir /mount_point/app/

  # chown r oracle: oinstall /mount_point/app/

  # chmod 775 r /mount_point/app/

  For example:

  # mkdir -p /u01/app/  
  # chown -R oracle:oinstall /u01/app/ 
  # chmod -R 775 /u01/app/  

  I want to know is the following, which one should I get about this

  (a) create a new partition, make a new file system and then mount it on the directory/U01

  or

  (b) create a/U01 directory in the root (/) directory using mkdir and just go ahead with the installation without any additional partition or file system.

  Thank you.

  Hello

  as you use this machine in a virtual machine, you can simply create the folder with mkdir. The need for the mounting points on the various devices becomes relevant for productive environments due to performance reasons.

  / Florian

• Oracle Linux (Red Hat) on 14 t Envy Touchsmart

  I am looking for a compact machine to install Oracle Linux (based on RHEL)

  for purposes of development.

  The 14 t Envy Touchsmart ticked all my boxes (with the exception of the touchscreen) and I'm

  a point where I am seriously considering this machine. I checked the recommended

  material on Red Hat ( https://hardware.redhat.com ) that lists several HP machines,

  who did not understand the desire, but I was wondering if there is a significant difference

  prohibiting the RHEL running on the machine of envy from the officially

  support of the HP machines.

  I understand that RHEL is through a thorough process and some materials may

  do not be taken in charge yet, but I'm ready to compile and install all the required drivers and

  swap the minor components of the material if necessary.

  Essentially, what are the problems that I'm likely to expect in terms of compatibility of equipment?

  A.

  Well, never mind.

  I'll just take the EliteBook 840.

• The details of the Instance of the host to Oracle Streams

  Hi all

  I'm using Oracle 11 g on RHEL-5 2.

  I have Oracle installed streams. How could I know the instance and the host name where the data stream configured amoong each other.

  Also how can I get the schemas that are synchronized to within the framework of water courses?

  Kind regards.

  Check log_archive_dest_n to see the location of the delivery of the archivelogs. Tnsnames.ora will give you hostsnames related to the services used.

  Also, you can find

  dba_services

  sys.streams$ _capture_process

  dba_capture

• Oracle Rac on San storage

  Hello

  We are at the heart of the definition of a process for installation of 2 node to a san storage device.  Oracle 11.2 on Rhel 5.

  What is the process of implementation recommended for shared storage.

  We want the mirroring to stay at the storage level.

  * NFS without ASM

  * NFS with ASM

  * LUN with ASM

  * LUN without ASM

  All other as appropriate.

  I went through the documentation, it gives options, however, does not tell best practices.

  Thanks in advance everybody and apologize if there is already a post about this and I repeat it.

  The only choice, I will focus on what is LUN (fiber or Infiniband fabric layer) with the ASM.

  And no ASMLib. (optional, not required)

  Set the devices property LUN via udev. Configure logical device for ASM using MPIO.

  I'm going to call any other method, below.

• After changing the orainventory place im unable to connect using the oracle user

  Hello

  IM using oracle 12 c on rhel 6 after correctly installing the software, I changed the location of oravinventory in/data/houses

  / u01/app/Oracle

  After making these changes im is no longer able to connect using the oracle user...

  also I back return changes I had made to the orainventory folder still unable to connect using the oracle user...

  any help on this would be greatly appreciated

  Sadia. wrote:

  Hello

  IM using oracle 12 c on rhel 6 after correctly installing the software, I changed the location of oravinventory in/data/houses

  / u01/app/Oracle

  After making these changes im is no longer able to connect using the oracle user...

  also I back return changes I had made to the orainventory folder still unable to connect using the oracle user...

  any help on this would be greatly appreciated

  Newer versions of oracle have implemented a great new technology to help solve problems, called "error messages."  Unfortunately, I can't find any reference to an error message named 'is no longer able to connect.

  And why you are moving your site from inventory?  When you have installed oracle, he put the inventory where he wanted.  There is no reason to try to change or replace.

• How to check for optional Oracle 10 g 2 installed components?

  Hello

  How can I get a list of oracle all optional components/functions installed database (some of them may require additional license)? I was going through a list of the directory objects in a database and I spotted "ORACLE_OCM_CONFIG_DIR" in one of the databases (others don't have it). When I checked, it turned out to be a directory required for Oracle Configuration Manager (it's maybe even a completely separate installation).

  I have to configure a new oracle database server where I have to install everything that is installed on an existing one.

  Oracle 10 g 2 - RHEL 5.8

  Please advise!

  Best regards

  Hello

  http://docs.Oracle.com/CD/E11882_01/server.112/e24448/statviews_4208.htm

  DBA_REGISTRY displays information about all of the components in the database that are loaded in the registry of the component.

  If this view lists the components loaded into the database... Well according to the docs of Oracle anyway.

  How to check to see if the CMO is installed must:

  http://docs.Oracle.com/CD/E12482_01/doc.103/e12481/ccrqs.htm

  Navigate to the ccr/bin directory and locate the emCCR file. If emCCR exists, the CMO has been configured.

  Don't think that you can get this information from a view.

• Oracle 11.2.0.3 installation error pdksh - 5.2.14 is missing

  Hello
  
  I am getting error while installing Oracle 11 g on RHEL 6.2 11.0.2.3 64-bit below.
  
  on the prerequisite error checking
  
  pdksh - 5.2.14 is missing
  
  
  Could you please suggest the solution for this.
  
  
  Some sites offer: to prevent the default installation, update the configuration file utility audit of the Oracle (cvu_config) cluster. East - the currect?
  
  Or I'm going to ignore it?
  
  Thanks in advance :)

  You are welclome :)
  Please mark the thread as answered if the answer to your question in. If someone post is useful or appropriate mark it accordingly

• Oracle ora-12545 error

  Hello
  I have a problem to connect my database
  error ora-12545 Connect failed because target host or object does not exist
  I checked the forums for similar error
  tried all the recommendation as
  Check the file hosts, ping server... but nothing
  
  My connection is like that
  I have a server of db oracle on a RHEL 5.4
  I have a client oracle on an other RHEL 5.4
  
  I tried to connect to the Database via the client, but it does not work
  I have configured my connection string (orcl)
  tnsping work: tnsping orcl
  Still I can't connect to the db Server
  
  Here is something else
  When I type sqlplus that comes from the command prompt
  username
  After the password
  and then I had error ora-12545 connect failed because target host or object does not exist
  
  but
  
  When I connect like this: user/pass@orcl
  it brings me to the shell prompt without giving error *.
  as it connects and disconnects just after
  
  Are there any newspaper I should enable or check?
  
  What should be done to fix this?
  
  Any idea would be appreciated?
  
  Thank you

  What do you see in the strace output file that corresponds to the time when SQL * younger disappear?

  You can view the last 100 lines or more of the file?

  In addition, you use an AMD processor on this system by chance? The reason why I ask is because of the following My Oracle Support note:

  ORA-24550: SQL * Plus Client 32-bit can hang on a Linux X 86 - 64 OS with processor AMD [ID 1120724.1]

  However, we have not seen any messages associated with this question in one of your outings, so may not be relevant at all.

• Installation of IOM on RHEL 6 or OEL6 possible?

  Is it possible to install Oracle Identity Management on RHEL 6 or 6 OEL?
  What are the current certified operating systems at present for the Installation of the IOM (link to the oracle documentation would be nice)?

  Check this box:

  Certification matrix

  -Marie

• [INS 20802] Failure of the Oracle Net Configuration Assistant

  Hi, I just tried my first installing Oracle 11 g on RHEL 6.3 2 I followed the guide on http://www.oracle-base.com/articles/11g/oracle-db-11gr2-installation-on-oracle-linux-6.php
  
  Progress is 95% and then says: ' [INS 20802] Oracle Net Configuration Assistant failed ' check installActions.log. Here's the tail of this journal, any ideas what I should do? My screen looks like this:
  http://i.imgur.com/ZQKBp.PNG
  
  INFO: From 'Oracle Net Configuration Assistant.
  INFO: From 'Oracle Net Configuration Assistant.
  INFO: Parsing of command line arguments:
  INFO: Setting "orahome" = /u01/app/oracle/product/11.2.0/db_1
  INFO: Setting "orahnam" = OraDb11g_home1
  INFO: Setting "instype' typical =
  INFO: Setting "inscomp' = ano, machine virtual Java, client, server, oraclenet
  INFO: Setting "insprtcl" = tcp
  INFO: Setting 'cfg' = local
  INFO: Setting "authadp" = NO_VALUE
  INFO: Setting "responsefile" = /u01/app/oracle/product/11.2.0/db_1/network/install/netca_typ.rsp
  INFO: "Silent" parameter = true
  NEWS: Fact parsing command line arguments.
  INFO: Oracle Net Services Configuration:
  INFO: Profile complete configuration.
  INFO: Oracle Net Listener startup:
  INFO: Listener control running:
  INFO: /u01/app/oracle/product/11.2.0/db_1/bin/lsnrctl start LISTENER
  NEWS: Auditor complete control.
  INFO: Beginning of earpiece failed.
  NEWS: Check the file path for more details: /u01/app/oracle/cfgtoollogs/netca/trace_OraDb11g_home1-12071412AM3442.log
  INFO: Oracle Net Services Configuration failed. The exit code is 1
  INFO:
  CAUTION:
  INFO: Finished named Plugin: Oracle Net Configuration Assistant

  >
  I am Oracle 11 GR 2 Version 11.2.0.3 I have downloaded this week from Oracle's Web site.
  >

  PL indicate where you have downloaded 11.2.0.3 from - it is only available on My Oracle Support (https://support.oracle.com), whose access requires a paid from Oracle support contract.

  If you have downloaded on http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html, you have downloaded 11.2.0.1 which is not certified with Linux 6.x as shown above

  HTH
  Srini