Remote vs. Remote Access Management

Similar Questions

• When I try to start the Remote Access Connection Manager in services.msc, the service will not start.

  Rick2425

  When I try to start the Remote Access Connection Manager in services.msc, the service will not start. I get the same error: "Windows could not start the service of connection manager on the local computer remote access: Error 1068: the dependency service or group could start."  Also, I can not restore the system to come and let me run it.

  It is a Dell PP31L, which belongs to a friend who does not connect to the internet because of these error messages.

  Hello Rick2425

  See the thread below and let me know if it helps thanks.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-remote-access-connection-manager/b5155a8a-671e-4d11-8a99-deadc7aee8a1

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• The remote access connection manager could not start. Error 2: cannot find the specified file.

  I've updated from vista to the most recent update.

  I have windows vista Home premium 32-bit.
  I want to get this matter resolved without having to reinstall as I have a few games installed it on this system.
  The modem is not the issue as other computers connect very well.
  Thanks for the help from Microsoft.
  Recently, I tried to connect to the internet but that was not possible, because no connection could be established. The remote access connection manager does not start 2 error: could not find the specified domain. the RasMan-dependent services are started, but Manager logins remote does not start.

  Hi Mundilfar,

  You can try the folliwng steps and see if it helps.

  Step 1:

  You can try to scan the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2:

  If you are always faced with the question, then you can try to give permission for the Rasman registry key and see if it helps.

  Important: The following steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

  a. Click Start, type regedit in the search box and press ENTER.

  b. Locate the following subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan

  c. right click on the key and click Permissions.

  d. Select Advanced, click on owner tab, click your user name, and check the 'Replace owner of subcontainers and objects', click Apply - click OK.

  e. click the user or group name that you want to work with.

  f. check allow total control. Click apply and then click OK.

  g. restart the computer and check.

  Hope this information is useful.

• Remote Access Auto Connection Manager and error with a VPN work

  I use my laptop to connect to my VPN working. It has not worked since June 24, 2010. I get a message indicating that the connection to network access device is not found. I also have a problem with the connection manager automatic remote access. I'm trying to launch and get an error code 5, unauthorized. The Auto Connection Manager remote access has something to do with the vpn access problem and if so how can I solve this problem?

  Hello hitherandthee,

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the platform of networking on TechNet. Following your question thanks for posting the link below:

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads?page=10

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 1068: the dependency service or group failed to start and failed to start the remote access connection manager service.

  Original title: Windows could not start the service of connection manager on the local computer remote access

  amplifier

  Windows could not start the service of connection manager on the local computer remote access

  Error 1068: The dependency Service or group could start.

  Hi sunelchandraoli,

  1. when exactly you receive this error?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  "Make sure that all the services of the dependence of the"Remote Access Connection Manager"" are launched in the list of services...

  a. Click Start, type services.msc in the box start the search.

  b. select Services from the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. right click on the Remote Access Connection Manager service and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the service status and then click OK.

  f. also check for long-term services.

  The dependency of 'Remote access connection manager' services include:

  i. secure Socket Tunneling Protocol Service

  II. telephone

  III. Plug-and-Play

  IV. Remote Procedure Call (RPC)

  c. of DCOM Server process Launcher

  VI RPC end point mapper.

  Make sure that the above services are started in the services list. If this is not the case, start all services above and check.

  Step 2:

  You can also try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information is useful.

• Failed to start Remote Access Connection Manager Service. Get the 20 error: the system cannot find the specified device.

  This seems to have started with the last batch of updates of Windows 7 (including SP1).
  I can't connect using dial-up.  Get the message:
  Cannot load the Remote Access Connection Manager service
  Error 711: The operation could not complete because it could not start the remote access connection manager service
  in time.  Please try the operation again.

  When I try to start the Remote Access Connection Manager service manually, I get the message:
  Windows could not start the service on Local computer remote access connection manager.
  20 error: the system cannot find the specified device.

  My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.

  I don't know what else might have changed.

  Hello Vince_867,

  Thanks for your post.  Take a look at this thread for a possible solution to your problem.

  See you soon

• The managed behind router switch remote access?

  What is the best way to access remotely to a switch behind a router?  I will use a switch SF300, and there is no server.

  For points of access (PA) behind a router, I give each a diffferent LAN address and port number.  In router I have forward TCP traffic with the single port/LAN IP.  Then using the port numbers with the address of the static router, the browser can remote access to the router or the attached AP.  But where do I put the managed switch LAN port number?  Assume default is port 80 and I would change to 8001 to switch #1; 8002 to switch #2; etc.  Could not find this info in the manual of configurtion.

  Hello

  At this point, I would recommend a call to the Cisco Small Business Centre at 1-866-606-1866 support so that action can be taken and your configuration can be reviewed.

  I have reproduced the concern here and I am able to remotely manage my switch SF300 with an RV082 as the router.

  My rule in the RV082 are as follows:

  Creating a custom topic UPnP service.  Create SF300 application name (it is a basic text field and can be any name), 8001 an external port and internal port 80.  I send to the address IP internal SF300 switch and click the check box.  From there on, I select Add to the list.  Once it appears in my list, I then click Save settings at the bottom of the page.

  Thank you!

  Dave

• Remote Access Connection Manager

  What is Remote Access Connection Manager and what is it?        PS. I don't know what Windows topic category and applications, this falls under, but since I HAD to choose one...  Thank you for your help.

  Hi bjeja,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  Remote Access Connection manager manages connections dial-up and virtual private network (VPN) from the computer to the Internet or other remote networks.

  If you have questions about Windows do not hesitate to answer and we will be happy to help.

• Why can't I start Remote Access Connection Manager

  I am not able to connect to internet using my 3G Broadband. I try to resolve the status of the remote access connection manager to "on the road", but the error message invites up to said "Windows could not start the service on local computer remote access connection manager. Error 1068: the dependency service or group could start. "I find the dependencies are Remote Access Auto Connection Manager, routing and remote access, Sharing (ICS) to connect Internet. I tried to put those 3 to "started", but was able to start also.

  Hello
   
  You must make sure that the underside of services are started and restart your computer and check if the problem is resolved.
   
  To start the services.
   
  1. click on start.
  2. type Services.msc in the search box and click on enter.
   
  Note: the common addiction for "Remote Access Connection Manager" and 'Remote Access Auto Connection Manager' is 'Secure Socket Tunneling Protocol Service'.
   
  Make sure that you check the properties of service no matter what you try to start, then click the dependency tab and make sure that you select the dependency registered under this service services.
   
  The dependency of 'Remote access connection manager' services include:
   
  a. secure Socket Tunneling Protocol Service
  b. phone
  c. Plug-and-Play
  d. remote Procedure Call (RPC)
  e. DCOM Server process Launcher
  f. RPC end point mapper
   
  Make sure that you try to start the Connection Manager Service dependency services automatic remote access as well.
   
  Method 2:
   
  I recommend you to update the drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the assword or provide confirmation.
  2. in Device Manager, locate the device, and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.
   
  Try to follow the link provided to update a hardware driver that is not working properly and check the question below.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Homekit remote access does not

  Hello.

  I have a Schlage door sense block 100% functional when connected by bluetooth with my iphone (ios 10) either when I m with the sense or Homekit app it management.

  The problem starts when I try to work remotely.

  Yes:

  (1) my 3rd generation Apple TV (Maj) is connected with the same iCloud account that I use in my other devices, including my iPhone

  (2) Apple TV shows as 'connected' when I check my hub within the Homekit app status

  (3) Apple TV is "always on."

  (4) I tried to connect a disconnect in icloud again several times.

  Need help please!

  I chose this lock exclusively to access remote homekit.

  Thank you!

  It seems that the fault is in schlage's recent firmware update.  They have posted the following on their web site about seven 18, 2016:

  Some clients of Schlage sense suffered a loss of access remotely through the 3rd generation Apple TV after update of their lock to the version of the firmware 3.42.

  We are aware of the problem and are working quickly to resolve.

  In the meantime, you can learn more details about how to set up an Apple TV and iPad for remote access and automation of your Schlage lock and other accessories HomeKit.

  http://Unlock.schlage.com/blog/unlock-Schlage/Schlage-sense-and-remote-access-th rough-apple-tv

• Remote access? 'other' user appears in the Excel file

  My husband uses Excel 2008 for Mac on his mini. Today, it has created a new Excel file, and when he went to save him, he did not allow him to do so. After I told him to try to "Get Info", he saw that there was another user listed as having access to 'wheel' (FIRST HMMMM?). None of us use this name. The permissions are set to read and write.

  I could, even if I don't have to open the lock, allowing to delete this user and change the permissions of the "Everybody". Always without having to open the lock.

  I open the lock using his password, made another change, saved and closed the file.

  I went in its security and confidentiality and found that the Firewall was turned off. I turned who, without having to open the lock. (DON'T know WHY I didn't have to open the lock.-SECOND HMMMM?)

  So, I changed his password, all closed and restarted the computer.

  No more 'wheel' on what it is, yet. The permissions are correct so far.

  HOW to know if someone would have managed to remotely access her computer? This doesn't seem to be that someone got access to distance?

  Person not? No ideas?

• Failed to start remote access service

  Hello

  I get a vps and I install ca and iis and the remote access service

  I allow it as a vpn server

  When I try to run the remote access service there gives me an error

  The Routing and remote access is dependent on the Remote Access Connection Manager service, which could not start due to the following error:

  The dependency service or group was able to start.

  I reslove this problem to run these commands:

  netcfg u ms_sstp

  netcfg - c p-i ms_sstp.

  net start sstpsvc

  net start rasman

  now when I am tempted to throw there gives me this error:

  The Remote Access Connection Manager service terminated with the following error:

  The system cannot find the specified device.

  So what is the problem?

  Thank you.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft TechNet forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/categories

• Windows disabled remote access to my wireless printer

  My printer is connected wireless to the computer at home (so a 'network', I guess).  But the recent problems led me to authorize remote technicians, and apparently, as collateral damage, my printer does not print now.  At one time gave a convenience store, I found a statement that "Windows has denied access to distance", but I can't find out how to restore remote access.  Printer is now installed, and the work and watch as the default printer, with options for "start printing immediately.

  Anyone know how to force Windows to restore remote access to my computer to the printer?

  Thanks in advance

  Rich

  Hi rich,

  Follow these methods.

  Method 1: Follow the steps in the article.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  Method 2: Uninstall and reinstall the network drivers.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  For reference: printer in Windows problems

• I noticed that my remote access has been activated twice in a week but I did not. no way to verify when, what, who activated via the event log,...?

  I noticed that my remote access has been activated twice in a week but I did not. no way to verify when, what, who activated via the event log,...?

  Hi dewthisnow,

  The information office for remote access must be in the security log.

  For more information, see:

  To disable remote desktop

  To view the logs in Event Viewer, see:

  Using the event viewer        

  Procedure to view and manage event logs in Event Viewer in Windows XP