Similar Questions

• Error ch.dunes.model.sdk. Finderexception Vcenter server plugin SDK

  Hello Experts,

  My vco is unbale to connect to vcenter with error 'error ch.dunes.model.sdk. SDK finderexception "plug-in error.

  Please find the attached screenshot for the same thing. All the lights in configuration vco are green. Kindly let me know how to proceed further.

  Thank you

  VAMSi

  Hello

  I see errors in the plugin vCenter. Sometimes, you must reinstall the ssl certificate, configure the vCenter again and after a server rebooted just fine. If you can navigate in the objects of vCenter as in your screenshot, everything should be good. Make sure that the user in the config has administrator rights.

  Best regards

  Christian

• Error in the logs when a workflow running on the web client of vSphere WARN {} [TypeQualifierToDecoratorConverter] could not find the mapping for: class ch.dunes.model.type.qualifier.TQCallerParameter, [kind:null, name:contextualParameter, value: __NULL__

  I see this error:

  WARN {} [TypeQualifierToDecoratorConverter] could not find the mapping for: class ch.dunes.model.type.qualifier.TQCallerParameter, [kind:null, name:contextualParameter, value: __NULL__]

  pop up in newspapers of vCO a few times on a workflow when I try to run it from the web client of vSphere.  I wonder if it is somehow contributing to the time it takes to render the page.  We never saw it or someone has a clue about what might be the cause.  Newspapers are clean when I run the workflow of the vCO client.

  TQCallerParameter is a kind of decorator that is not exposed in the REST API. This warning message is safe and does not affect performance at all.

  You don't see it during execution of the workflow of vCO customer because the customer vCO does not use the REST API and therefore does not need to run conversions Decorator.

• ch.dunes.vso.sdk.conf.WebConfigurationAdaptor documentation

  I wrote a plugin of validation to control a family of network devices and I would add a configuration section for it in the vCenter Orchestrator Configuration similar to other plugins web application. I currently have IP addresses/hostnames and bouts of credentials hardcoded in my plugin and I want to be able to expose these configurable features. Looking at the sample SolarSystem plugin of the developer's guide, it seems to do this by implementing the ch.dunes.vso.sdk.conf.WebConfigurationAdaptor but I can't find any documentation on the way it is supposed to work.

  Am I missing something and this is documented somewhere, or if this is not intended to be a part of the API that is used by external plugins?

  Hi Brent,

  Contents of system solar plug-in that has been extended to have an entry in the vCO configuration server is attached.  With this, you would be able to see the plgin of solar system in the vCO configuration server, where do you see the Plugin configured so vCenter. However, the documentation for the same does not include this part.

  We believe that this could be useful for you. Please let us know if you find the example as useful or you have additional questions.

• Error 1074395241: The model descriptor does not contain the data required for the corresponding rotation invariant.

  Hi all

  I use the model Match 4 IMAQ to detect the angle of rotation of an image of model. However, it displays the error: "error 1074395241: the model descriptor does not contain the data required for the corresponding rotation invariant." What exactly is the problem? How to solve this problem? The details are explained below.

  My project is a bit complicated. Part of the block diagram containing the IMAQ Match model 4 is illustrated below:

  

  The source image is a series of images of images read from an AVI video (I used a loop for to process the images frame by frame). The image of the model is an area of the first selected image. So, this means, the user selected the ineterst object in the first frame of the video, and each of the following images to find the object corresponding interest & determine its rotation angle. When I run the above diagram, there no error. However, it shows the angle of rotation zero no matter what it is 'really '. Therefore, I changed the schema by adding parameters, listed below:

  

  But in this case, when I run it, it shows the error I mentioned in the subject line.

  If you need more information about my project to identify the problem, please let me know.

  Thanks in advance.

  S ' Please example from model that comes with labview First
  Go to labview Help > find examples and you can search for example.
  -You create model with angle range and what kind of special criteria you want to use.
  -To do this you must use IMAQ learn pattern before using IMAQ model Match 4
  Reference:http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/

• Error: ch.dunes.login.ldap.LdapElementGeneric

  Hello

  When you try to configure the plugin and even during the test of the LDAP user I get this error:

  Error: ch.dunes.login.ldap.LdapElementGeneric

  I've seen people talk about the VMO Admin group etc, but I don't have such group on my ad... must be manually created? What is a bond?

  Also, is this info anywhere in the Administrator's Guide?

  Kind regards

  Nuno

  Yes you have greate this group in AD.

  For example: create the Group vmoadmins and a vmoadmin1 and make him member of vmoadmins

  then set in the group attribute:

  CN = vmoadmins, CN = Users, dc = mydomain, dc = local

  This should help

  D

• Oracle 11 GR 1 material on Windows Xp error cannot find J2SE SDK installed to the path

  When I type in the path to java.exe in SQL dev., I got error ' cannot find J2SE SDK installed to the path: C:\Program Files\Java\jre6. "when I entered the path C:\Program Files\Java\jre6\bin\java. What is the reason for this error? How can I fix it? Installation of the database say it was successful

  Developer SQL must the JDK Java JRE not to operate successfully. Your path looks like a path for the JRE. There is a download of windows that comes with the Java developer kit.

  concerning

  Niall

• Build the NMAKE error for simulink model

  I spent by the procedure of how create the DLL of simulink models http://digital.ni.com/public.nsf/allkb/D70E74FDA37CD8E486257990000603A0 the and have not been able to successfully build the DLL for my model.

  I installed Visual Studio 2008 and I can see the Relatime Veristand workshop added to matlab. However, I get the below error.

  The system does not have the specified path.
  "NMAKE: fatal error U1077: 'copy': code 0 x ' 1 ' back
  Stop.
   
  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>echo the mark command returned an error of 2
  The mark command returned an error of 2
   
  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>An_error_occurred_during_the_call_to_make
  'An_error_occurred_during_the_call_to_make' is not recognized as an internal or external command
  operable program or batch file.
  # Time real workshop build procedure for model: 'CabinTemp_NI' aborted due to an error.

  Matlabe error window has the explanation, as shown below:

  It seems that the build process could not locate some utilities (e.g. do,
  compiler, linker, etc.). Please check your environment variables path and tool
  are correct. You should be able to run the make command:
  .\CabinTemp_NI.bat
  at an MS-DOS command prompt in the directory:
  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw
  Currently, this method generates the following error message:

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>set MATLAB = c: \ Program Files (x 86) \MATLAB\R2010bSP1

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>set MSVCDir = c: Program Files files (x 86) \microsoft visual studio 9.0\VC

  ' D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>"C:\Program files (x 86) \MATLAB\R2010bSP1\rtw\bin\win32\envcheck" INCLUDE "c:\program files (x 86) \microsoft visual studio 9.0\VC\include".

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>if errorlevel 1 goto vcvars32

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>set VSINSTALLDIR = c: Program Files files (x 86) \microsoft visual studio 9.0

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>set VCINSTALLDIR = c: Program Files files (x 86) \microsoft visual studio 9.0\VC

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>set FrameworkSDKDir = c: Program Files files (x 86) \microsoft visual studio 9.0\SDK\v3.5

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>call "C:\Program Files (x86)\MATLAB\R2010bSP1\toolbox\rtw\rtw\private\vcvars32_900.bat.
  Definition of conducive using Microsoft Visual Studio 2008
  (If you have another version of Visual Studio or Visual C++ installed and wish
  to use command line tools, run vcvars32.bat to this version.)

  I have the good set compiler but I'm not able to solve this error. I've also attached the text file that contains the log for the build process.

  Can someone help me with this please? where am I wrong or what am I doing wrong?

  Thank you

  Hi Jigar273,

  (1) have you configured MATLAB to use the compiler to MSVC ++ 2008? If not, then just type mex - configure in the MATLAB command window and follow the printed instructions.

  (2) open Windows command prompt and type % NIVERISTAND_ROOT, and then press ENTER. The call to this environment variable returns C:\VeriStand? If this is not the case, then please add this environment with the value of C:\VeriStand variable to your system and restart the PC. To do this, follow the instructions as described in the link: http://support.microsoft.com/kb/310519

• QosmioG35 error recovery 'this model is is not supported"is displayed

  Hello

  Please help me.
  I have QosmioG35-av650. When I pick up my cell phone, message to show that this model is not supported 03ffff0000 error.
  Please help my with this problem.

  Thank you for all

  Hello

  Maybe is exchanged on this laptop mainboard?

• The Web Service of LabVIEW error on restores model ESP

  Hello

  I was hoping that people would be able to help with the following problem:

  I'm currently on the Page Embedded Server (ESP), functionality of the LabVIEW webservices script and keep receiveing an error when you try to view a page.

  I think I put in place the Manager HTTP queries properly - buffered stream with headers

  The correct model is located and used as the page reaches the insertion point variable esp.

  I find that the AddressBook example works fine, unless I try and add an additional variable to the model, then the same error occurs.

  I have attached a sample project which shows the same behavior, and the error is less.

  Tested on LabVIEW 2014 (14.0.1 SP1) 32-bit on 64-bit Windows 7.

  See you soon

  John

  *****************************************************************************************************

  Error-67035 occurred at .vi NI_WebServices.lvlib:Error Converter (ErrCode or status)

  Possible reasons:

  LabVIEW: The Services Web of LabVIEW (Hex 0xFFFEFA25): error in the ESP.

  «"" "String of full appeal:»»"»
  NI_WebServices.lvlib:Error Converter (ErrCode or status) .vi
  NI_WebServices.lvlib:Web Request.lvclass:Render ESP Template.vi
  Test.VI
  Test.vi.ProxyCaller

  *****************************************************************************************************

  Hi John_Neutron,

  I worked on your code today and we managed to reproduce and to fix the error you saw.

  The Web service name ESP file and rendering the page, but it throws the error because the variable you are trying to set was not properly declared. We managed to make the error go away by changing the file text with Notepad like this ESP.

  --------------------------
  <%
  //This is a server side comment
  // Variables:
  var myvariable;
  //
  %>

  
  

  This is the test pattern

  
  
  It's the body:

  Here's the varaiable

  
  

  Variable: @@myvariable

  
  ---------------------------

  Before, you had / / in front of the variable (making a comment) and you don't have "var" to tell him you have said anything (it's all in the 4th line). Without the appropriate statement, the code generates an error when it is called.

  Vsenior

• Runtime error in the model of process and sequence still happening

  I do initialization custom in the process template (in the recall of ProcessSetup). I call a .NET module which can throw an exception in certain error conditions. This causes him the process model to access the cleaning section of the process model (not the client sequence files cleaning) and that's okay. The problem I have is that I'm in my UI of the event AxAppMgr_ExecutionEnded and e. ResultStatus property argument exec indicates "success." I want that it says 'Error' or 'Incomplete' or something other than the past. The sequence of client never ran at all. While she had no failures, he could spend.

  How can I force the State to 'Error' or something other than "success"?

  Before check Execution.ResultStatus, you can check Execution.ErrorObject to see if an error has occurred and to obtain if necessary error information.

  Do something like:

  ErrorObject PropertyObjectPtr = run-> GetErrorObject();

  If (errorObject-> Exists ("occurred", 0) & errorObject-> GetValBoolean ("occurred", 0))

  {

  _bstr_t msg = errorObject-> GetValString ("Msg", 0);

  Add some other code you want here.

  }

  Hope this helps,

  -Doug

• error 'BlackBerry Tablet OS SDK 0.9.4 for Adobe AIR does not support mobile projects."

  Hello

  I installed Adobe Flash Builder Burrito and Blackberry Tablet OS SDK 0.9.4 on Windows 7. When I start to create a new project by selecting the ' New/ActionScript Mobile Project' menu, then in the new dialog box project of Mobile of ActionScript, I give a project name, and then choose 'BlackBerry Tablet OS SDK 0.9.4 for Adobe Air. At this point, the 'Next' button is gray on an error message on top as "BlackBerry Tablet OS SDK 0.9.4 for Adobe AIR does not support mobile projects.". Is there something that I am missing?

  I read somewhere someone comlains error message "BlackBerry Tablet OS SDK 0.9.4 for Adobe AIR support not projects mobile." occurs after installing Blackberry Tablet OS SDK 0.9.4 while there is no problem with Blackberry Tablet OS SDK 0.9.3. If it is true, where can I download Blackberry Tablet OS SDK 0.9.3?

  Thank you very much in advance,

  John

  @johnwneg, make sure that when installing FB Burrito, you:

  (1) run the installer as administrator.

  (2) select English International rather than NA English.

• SVN error: locked working model?

  With the help of 4.0.2 and get this error:

  svn: E155004: validation failure (details below): svn: E155004: working copy 'C:\Users\ezmkoru\Documents\Data Models\Versioned_Models\MSHEDW' locked svn: E155004: 'C:\Users\ezmkoru\Documents\Data Models\Versioned_Models\MSHEDW\MSH EDW\domains' is already locked.

  Now I can't get anything to record on SVN. The working directory is on my machine, used only by me. When I have a copy of the last record and then committed the change to SVN, it was fine. It was a few weeks ago. Any suggestions on how to solve this problem, not to mention a new SVN trunk?

  Hello Kent,

  You can try "team > cleanup working copy.

  Philippe

• error message on model dreamweaver download

  I get an error message when I try to download a template from dreamweaver to the Server Business Catalyst.

  I put in the {tag_pagecontent} tag. I tried a lot of different models and stripped to the bare bones, it will not download. It doesn't seem to be a problem with a file. I copied from another site for win me time on this site, may be that is the question.

  BC support told me to contact dreamweaver. I think this is a server error not a dreamweaver error. I use Dreamweaver cc 2015.  Any suggestions?

  Error message:

  On the road: 2016-03-09 06:45

  Path is: /Templates/template-mar9-basic.dwt
  Models: model-mar9 - basic.dwt - error - FTP an error occurred - cannot put the model mar9 - basic.dwt. Access denied. The file exists may not, or there could be a permission problem. Make sure you have permission on the server and the server is properly configured.

  Activity of the incomplete file. 1 file (s) or folder (s) have not been filled.
  Files with errors: 1
  Models: model-mar9 - basic.dwt

  In the settings of your site in Dreamweaver to add EU at the end of your username.

  

• Error ' com.vmware.vcloud.sdk.VCloudException: resource not found "for vdc.instantiateVappTemplate API call with vCD server 5.1.

  
  I get the error message "com.vmware.vcloud.sdk.VCloudException: resource not found" for vdc.instantiateVappTemplate API call with vCD Server 5.1.I tried with two customer VCDs 1.5 and 5.1. Please notify.

  Here is the code snippet

  Parameters InstantiateVAppTemplateParamsType = new InstantiateVAppTemplateParamsType();

  parameters.setName (vappName);
  parameters.setSource (vappTemplate.getReference ());
  parameters.setInstantiationParams (networkParams);
  vdc.instantiateVappTemplate (parameters);

  Reqauest URI and body:

  https://vCD5.1_Server/API/Admin/VDC/6ce10d02-746C-4C7E-a66b-c172d5990a28/action/instantiateVAppTemplate

  <? XML version = "1.0" encoding = "UTF-8" standalone = "yes"? >
  " < ns6:InstantiateVAppTemplateParams xmlns =" http://www.VMware.com/vCloud/versions "xmlns:ns2 =" http://schemas.dmtf.org/OVF/Envelope/1 "xmlns:ns3 =" http://schemas.dmtf.org/wbem/wscim/1/Common "xmlns:ns4 =" http://schemas.dmtf.org/wbem/wscim/1/CIM-Schema/2/CIM_VirtualSystemSettingData "xmlns:ns5 =" http://schemas.dmtf.org/wbem/wscim/1/CIM-Schema/2/CIM_ResourceAllocationSettingData "xmlns:ns6 =" http://www.VMware.com/vCloud/v1.5 "xmlns:ns7 =" http://www.VMware.com/Schema/OVF "xmlns:ns8 =" http://schemas.dmtf.org/OVF/Environment/1 "xmlns:ns9 =" http://www.VMware.com/vCloud/extension/v1.5 "name ="vApp_amit-2"> " "" "" "" ""
  < ns6:InstantiationParams >
  < ns6:NetworkConfigSection >
  < ns2:Info / >
  < ns6:NetworkConfig networkName = "1" >
  < ns6:Configuration >
  "" < ns6:ParentNetwork type="application/vnd.vmware.admin.network+xml" name = "Network1" href = " https://vCD5.1_Server/API/Admin/network/44fea373-8c51-4403-b97e-3dbc4b770eda "/>
  Bridge of < ns6:FenceMode > < / ns6:FenceMode >
  < / ns6:Configuration >
  < / ns6:NetworkConfig >
  < / ns6:NetworkConfigSection >
  < / ns6:InstantiationParams >
  " < ns6:Source type="application/vnd.vmware.vcloud.vAppTemplate+xml "name ="Win2008R2"id =" "urn: vcloud:vapptemplate:a47ada7e-24b6-457f-9578-f1d2f2304dec" href =" " https://vCD5.1_Server/API/vAppTemplate/vappTemplate-a47ada7e-24b6-457f-9578-f1d2f2304dec "/>
  < / ns6:InstantiateVAppTemplateParams >

  Hello

  Instead of queryReferences(), use the queryIdRecords() method.

  RefRes ReferenceResult = queryService.queryIdRecords (QueryRecordType.ADMINORGVDC);

  {for (RecordResult RV: {refRes.getRecords ())}
  If (vr.getName () .equals (vdcName)) {}
  VCC = Vdc.getVdcById (admin, vr.getId ());

  }

  In this way don't worry about whether the returned reference (containing href, mediatype and name) is API-API/Admin user.

  ORGVDC - request user Org/tenant - this will not work if you are a user/Admin Org.

  ADMINORGVDC - query the system Admin user - this will not work if you are a system administrator.

  Kind regards

  Rajesh Kamal.