Output of the front speaker left is almost a whisper

Similar Questions

• Front speaker

  When I listen to music or watch video only the speaker down plays... What are the front speaker for?

  The "speakers" on the front are the ear speaker and microphone. Audio and video / sound are played through the speaker on the bottom.

• Creation of a 'smart' to the front channel output

  Hi all

  I do not use that much of strings and I got myself in a coding which seems to be a bit beyond my skills at the moment.

  Let me explain. At this moment I have a table 1 d of channels. Each string refers to an error with a sensor. If there is no error, the string is simply an empty space (the strings were generated in MATLAB and imported in LabVIEW. To set an empty string in MATLAB, I did just something like: error = ' ')

  Currently, the strings are very generic and do not specify sensor who they want. I would like to change that by introducing a kind of data for these labels. (I considered to be one of the possibilities are import to a spreadsheet with the labels file in a column and saw the data converted into a table 1 d of channels, or something like that. Looks like there should be several ways to do this and I'm open to all solutions really.)

  What I would do, is match these two sets together, and if there is no error, then the rank would disappear since the two bays. Ideally I would also merge the two tables so that I have a label followed what is the error for the release of this label on the front panel.

  There may be an easier way to do all that I have not looked at. As I said, I'm open to any suggestion. But basically, I want to display only the sensors that actually have errors associated with them.

  If I understand correctly what you want well, here's a solution (see attached png). The loop For traverses the berries and produces an output of strings table. If the error string is empty then nothing is added to the array of results. If the error string is not empty, then the error string is the concatenated string Label and the result is added to the table on this. For the figures provided, the output array would have 4 entries:

  Name of the sensor 1 1 error

  Name of the sensor 2 2 error

  Name of the sensor 3 3 error

  Name of the sensor 4 4 error

• When I play a DVD on Windows Media Player I get almost no noise through the external speaker on my laptop

  Original title: no volume when playing DVDs

  When I play a DVD on Windows media player I get almost no sound through the external speaker on my laptop. I get some, but it is too weak to really enjoy the movie. If I use headphones I can hear the DVD very well, and I can hear the clips DVD sample provided with my computer on my speakers and headphones. If the computer can generate the volume correctly, but something goes wrong, whenever I try to play a DVD that is not on my hard drive. I tried every button volume already. Thank you

  Hi amorchien,

  1. He played very well earlier?

  2 have you tried to play the DVD in another computer?

  Step 1:

  In Windows Media Player.

  a. click on tools and select Options

  b. click on devices and click on DVD, then select Properties.

  c. make sure that Rip and playback are in digital mode.

  Step 2:

  This problem can be caused by incompatible codecs. I suggest that remove you / uninstall all installed third-party codec packs, players or video record programs.

  Codecs, frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

• I have Windows Vista - I'm a msge saying that the recovery disc (D) is almost full. How can I transer to OS (C) Disk that has plenty of room to the left?

  I have Windows Vista.  I'm a msge saying that the recovery disc (D) is almost full.

  How can I transfer to OS (C) Disk that has plenty of room?    Thank you.

  Hello

  I'm sorry, but you cannot move the D: Partition recovery or its contents; It will not work if you do.

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. If you want to reinstall Windows from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  See you soon.

• HP m7160n the front audio jack problem

  I am running Vista Home on my PC Media Center m7160n.  I used to be able to plug my headphones into the front audio jack and it would reduce the rear speaker output.  Now it doesn't!  I entered the sound properties and is set to turn off the rear socket, when the system detects a card into the front socket.  The helmet still works, but I need the speakers off when using the headset.  I hope this is enough information.

  Hi MrBassMan26,

  It's weird and looks like the jack-detect is not working properly. This problem just started happening? It happened after installing anything, even a Windows Update?

  If it just started happening, you can try to perform a restore of windows to an earlier point when it was operating normally. Or you could try to re - install the driver audio or even install a updated audio driver. Who should take care of it, and if not you may need to make some configuration changes in one of the sound properties (Windows or Realtek).

  I see that you have Vista, you accidentally upgraded to Vista XP?

  Try to install audio driver for Vista from Realtek: http://www.realtek.com.tw/downloads/downloadsCheck.aspx?Langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & GetDown = false

  Let us know how it goes.

• Tecra A8 and Adv Port Replicator III - no audio output from the port replicator

  I have a Tecra A8 anchored on an Advanced Port Replicator III. All ports (network, USB, video) with the exception of the AUDIO ports seem to work well. I can get sound from the headphone jack on the front of the A8, but nothing since the station docking ports. Is there a docking station driver or something I need to install to get the sound from the docking station not the laptop?

  Hello

  The Advanced Port Replicator III supports the line and line port left.
  As already suggested by user above; Check if you are using the command-line output port!

  Welcome them

• Equium A100-337 - can I manage 2jacks on the front?

  I have 2 Jack on the front of this laptop is for the microphone/line input and the other is the helmet.
  As I am a Dj I need 2 output stereo (one for headphones in the amp) so I can listen to the songs while playing songs.
  on my other computer when I connect a plug on the front panel it asks me what I want is to know back to the front of the enclosure.
  My question is: is there anyway to manage the 2 sockets on the front of the laptop instead of mic in & headphone I would rear stereo LR & before LR stereo?

  Hi DJ

  As far as I know that something like this is not possible. In my opinion, you should visit some stores PC and speak with dealers. I'm sure that you can buy some external device that allows something like this. Perhaps there are PCMCIA solution.

  When you have time go to the search option and use the DJ as a search term. If I well remember some DJs have already written here. Maybe you will find some useful information to make your job easier.

  Bye and good luck!

• Conflict of flow of data on the front panel

  Hello

  My vi is almost done, but I still have a problem with the front panel. I think that there is data traffic conflicts in my vi.

  When you run my vi, you will see the pop-up window asking you to set a path of file, control devices, selection of data to record and trace. Then, you might want to change the units, turn off all the buttons light and ok to select what data you want to save. Then click on RUN.

  The problem is; supposedly all the buttons are on by default, if you disable certain economies or tracing buttons to choose not to save, and then click RUN, after that all the buttons are again even if you have turned off before the race. They must stay off, if you have selected to save. The condition of main data flow is always the same be before running (only light buttons and ok).

  Do you have ideas of how to solve this problem?

  Thanks in advance

  You have what is called a race condition that usually slips in programs that use local variables.  If you look at your first while loop to read in the current value of the 'steam data hand' control and store in a shift register.  After the structure of the event outputs you write this offset value to register in the control and in the process of replacement of the changes that the user can do.

  A quick and dirty solution would be to manage the main event to change the value for 'Stream' in the structure of your event to update the shift register whenever the user changes the values in the control.

  A better solution would be to get rid of the shift registers and move local variables in the structure of the event.  As long as the option "lock the front until the end of the event" (I'm not sure of the exact wording and I work in the LabVIEW Base at the moment so I can't check) is selected it will ensure that you do not work in a race condition (you know the value cannot change inbetween you value reading, and you update the control).

  

  Even better would be to avoid local variables wherever possible.  This is general advice only and not not something that I can do much more tangible without knowing the details of how you want your application to behave.

  Hope this helps,

  Simon

• Audio output using the USB connector problem

  I use a USB connector to connect with Audio output. It's because my headphones Jack does not work.

  It worked without problems so far.

  My problem is that there is no output from my laptop to this USB device. The music plays and can be heard on the laptop. Connections (USB device & son) of the laptop work.

  I'm ising Vista home versio

  Any ideas?

  Try this:

  With the USB speaker connected, right click on the speaker icon on the tray (right), left click on 'sounds '. On the tab 'Read' the USB speaker should be listed, click to select it, and then click the button "set as default". Click the OK button to exit.

  Alternatively, you can go to control panel, Sound.

• Realtek High definition audio (onboard) do not recognize the rear speakers. statics of the right speaker.

  Realtek High definition audio (onboard ASUS CG5270)-current driver v6.0.1.6043
  Operating system: Win7 64 bit

  Everything was working fine until last week. I haven't had any changes and update logs don't show updates.

  Question:
  Using "Manager Audio Realtek DD" in the control panel.
  The rear panel does not all speakers connected. (Speakers tested and work on other systems.)
  No noise at all until that I disabled the front jack detection. Now I hear threw the rear speakers but with static 1/2 volume, without mute and the "Realtek HD Audio Manager" shows still no rear speakers.

  Things I have tried:

  1. check the connections (connections of cleaning)
  2. different stakeholders.
  3. Uninstalling the drivers and software.
  4. update of drivers.
  5. Rolling back the drivers.
  6. The system restore.

  Note: the "Realtek HD Audio Manager" shows the digital connection and the façade as available, but disappeared on the rear panel, even if the rear panel is only taken in use.

  I can usually solve these problems on my own, and it's the first time that I used a forum to ask for help in 15 years. I'm just puzzled.

  Hi, reorder,

  As you have tried almost everything to fix the problem, I would like to allows you to check if the rear speakers are disabled and the volume level is fine.  To do this, follow the steps below.

  1. Click Start.
  2. Click on Control Panel and click on sound.
  3. Playback tab, click speakers and click Properties.
  4. Click the levels tab and check if the back entrance is set on mute and uncheck the box.
  5. Select the level to 100% and check if the speaker rear works fine.

  Also, you can try disabling the improvements and check if it helps.

  To turn off the improvements:

  1. access control panel

  2. click on sound

  3. Select the play tab

  4. Select entry speakers/headphones

  5. click on properties

  6. Select tab improvements

  7 disable all improvements

  If the steps above do not work, you can contact the manufacturer of the motherboard and try to reset the BIOS to default settings and check if it helps. You can also take their support and try to update the BIOS and check if it helps.

  NOTE: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk

  If the above steps you may need to contact the manufacturer of the computer to verify that the equipment works very well and has to be replaced or the motherboard.

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R Microsoft Support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem in the right in the XPS1530 speaker, help me please.

  I was bye XPS1530 a few days before. But the speaker on the side right hand does not all sound output. I have tested the output from the speakers on Sigma such high definition audio intalled in my pc. the left speaker generated a result while the right, there is no.

  
  

• Is it still possible to put the URL bar on the front?

  Before the most recent change on my windows machines, I have had the firefox toolbar url and tabs button all on a single bar inside the "aero" windows style window decoration.

  Is it still possible to do? For the moment, I can't move the toolbar URL or menu options out of the toolbar and in the window decoration. If this is not possible can be done with an add-on? This change has doubled real estate display should read these.

  1. Classic restaurateur theme installation and restart Firefox when prompted.
  2. Open the modules (Ctrl + Shift + A Manager; Mac: Command + shift + A), then the Extensions category.
  3. Beside the classical restaurant theme, click on the Options button.
  4. On the main tab, make sure 'Mobile back-forward button' is checked. You can also check "Hide urlbars stop & reload buttons" and "combine stop & reload buttons. Close the options window when finished.
  5. Right-click on a zone empty of the tab bar and select Customize.
  6. Drag the front/rear, address bar, and any other key that you want in the toolbar and navigation on the tab bar.
  7. Drag all the unwanted items off the coast of the toolbar and navigation on the range of customization.
  8. Click the Customize the output at the bottom right button when finished.
  9. In modules, Extensions category, beside the classical Restorer theme Manager, click the Options button.
  10. On the main tab, under general UI, check "hide navigation bar. Close the options window when finished.

• HP EliteDesk 800 G2 Small Form: The front panel audio connector - this only made type to use for headphones and microphone

  Hello

  I am trying to determine what type of audio 3.5 mm plug to put into the connector on the front panel for the use of a headset to make video communications.

  could be - sleeve, ring and end cap (mono audio and microphone)

  or

  could be - sleeve, ring, ring and tip (stereo sound and microphone)

  Having read through the manuals and nothing is said on the type to use.

  Hello world

  Just plugged the connector 4 poles on my headset combination for my mobile phone (cellular) and the box of pop - up asked me to select headset or microphone - no selection for both.

  Looks like the right sleeve is for headphones only, and the left one is for headphones or micro - selectable by the user and not the two on a single sheet.

  Everything explained by the practice - but not the paperwork in the manuals.

  #5 for microphone or headset - menu popup is displayed after you insert a 3.5 mm plug to select that one but not both at the same time.  (So I can't use my headset to phone)

  Thank you

  Son

• Can I use my old pine 30 dock Ipod speakers for my computer? Is there an adapter that would allow me to plug into the power speaker on my desk?

  I like the sound of my ipod dock better than the speakers external computer. I'm looking for a way to use the dock AS my computer speakers.

  The iPod speaker-dock accessory has an auxiliary audio input.  It looks like the headphone jack of the iPod.  Or, it may have a pair of "RCA" (red/whtle) connectors, for audio input.  In both cases, you can use the audio cable to connect your computer to the speaker-dock.  For example, if it has an auxiliary input, you can use a cable like this (assuming that your computer has a headphone jack for audio output)

  http://www.Amazon.com/Monster-AI-800-mini-7-iCable/DP/B002E9HHZQ