P1102w printer: install hp1102w

Similar Questions

• HP LaserJet P1102w: Cannot install the driver or the printer

  I had this problem on my old PC as well.

  I plugged my printer via the USB port (a port I don't know for sure works) and nothing pops up to auto install or whatever it is. I thoguth that was weird, but I also thought that the pilot would be on the printer, so let's just go to the section of the Control Panel printer. I did it, and the printer is there, but he says that he has no driver. I tried the option to find driver, but that did not work.

  I thought maybe I just need to download it then. Came on the HP site, downloaded the installer for my printer and started running it. He gets to the part where I need my printer and plug it into the USB port. I did, but it will not register in the installation software I did. The USB port works, as I have the ability to eject the printer in the taskbar, but I can not install anything.

  Hello @Kitanya,

  Welcome to the Forums of HP Support!
  
  I understand that you encounter USB connectivity problems during the installation of your HP LaserJet Pro P1102w printer on your computer Windows 8.1. I would like to help you to solve this problem today. Now I see you tried first to install your HP Laserjet Printer simply by plugging the USB cable in order to run the HP Smart Install process. HP Smart Install is the installation program built into your printers of programming. By plugging the USB cable, if own you a CD player on your computer, the printer is supposed to be recognized as a software CD and an installation must be started. However, is there is no problem with the CD drive on the computer or the printer is blocked to be recognized correctly it can cause the HP Smart Install feature does not work correctly. That being said, when you tried to run the installation with the downloaded driver package and were prompted to plug in the USB cable, then because the printer has already been connected "prematurely" with the USB cable already recognized computer connection. Therefore, the computer won't recognize the P1102w related 'recently' if he thinks already that is.

  With that all being said, I will guide you in the faster and easier way to solve this problem. Please follow the steps below.

  Step 1: Uninstall the drivers:

  Even if the installation has not completed successfully a part of the software and drivers can have made their way onto your computer. It is important that we have a nice clean slate to work with, so please follow the steps to remove all traces of your computer printer.

  1. Unplug your USB cable from your printer HP Laserjet, as well as your computer
  2. Open the screen Start by clicking the Windows button on the lower left corner of your computer screen or by selecting the Windows key bottom left of your keyboard to the right of the Ctrl key
  3. In the start screen, type programs and features. Click on programs and features to run
  4. Scroll through the list of population programmes and to locate the HP Laserjet.
  5. Click the HP Laserjet Printer and select uninstall
  6. Follow the instructions on the screen to complete the uninstallation.

  Once the uninstall is complete, proceed to the next step.

  Step 2: Remove temporary files:

  1. Open the screen Start by clicking the Windows button on the lower left corner of your computer screen or by selecting the Windows key bottom left of your keyboard to the right of the Ctrl key
  2. In the start screen, type run. Click on Run to launch the run dialogue box.
  3. In the run box, type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder, once it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Reinstall the drivers:

  1. Please click here to download the appropriate drivers for your printer
  2. Once the site opens click on the download button at the top left
  3. Allow the download to run
  4. Follow the steps on the screen to reinstall your printer
  5. Do not plug in your USB cable until the installation screen invites you to.

  Once the installation is complete, please test printing.

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP LaserJet P1102w: Help with printer install

  HP LaserJet P1102w chip installed on the new windows 7 PC as a USB device when I am logged in it.   How do I make a printer so I can set as the default printer?  On the control panel / devices and printers, she appears as a device, not a printer.

  Solved the problem.  Re-directed HP smart install and the drivers have been loaded.

• Cannot install laserjet pro p1102w printer, usb error, please help?

  I was able to print things in the past using the USB of my printer. After I reformatt my computer, I tried to plug in the usb from the printer to the pc, the usb will not be installed, it has an error message that it could not reconigze the computer or something, I have a triangle of yellow warning next to the serial bus controller universal usb. I tried the update, but it cannot update, I tried to plug and plug it into the usb, I tried manually install printer in devices and printers, and yellow triangle still in the pc. Please help, I have a home edition of Windows 7 64-bit. And I recently change my network wireless after reformatting, but that any prior to reformatting, cause I have change the wireless network and still able to print, but after I can not format. Help, please

  Hi cowmanchess,

  It seems that you are having problems with your USB port on the computer.

  Have you tried using a different USB port on the computer?

  Have you tried a new USB cable?

  How long is the USB cable you are using?

  You have a USB hub between the printer and the computer?

  Unplug the USB cable and then download the software on the link below. Wait that the installation of the software requires you to connect the cable. Let me know if you get the printer installed?

  Driver and software of HP LaserJet Full Feature

• P1102w printer: have new router and can not figure out how to print wireless at P1102w printer - he sees old router

  I installed a new router (Netgear R6220) and cannot figure out how to get the P1102w printer to recognize the new router. It shows the former name of the router (Belkin.833) on the test page and displays the IP address configured by AutoIP rather than DHCP as the old router does. The computer is a desktop Dell Dimenstion about 3 years and use Windows 7. The router connects to the computer to the Internet.

  Help - How to make the printer recognize and communicate with the new router? (The original installation instructions don't seem to work for me.)

  I made an update of the firmware a few months ago and the currtent datecode is 20130703. Allowed to print from my Samsung S2 Tablet through the router.

  Here's what finally worked.

  1 had to withdraw from old installation CD but Uninstall selected, so I completely shut down the computer. Guy at Best Buy said to "remove the device" but it was not enough.

  2. download install the latest software from the HP download site and ran it. (http://ftp.hp.com/pub/softlib/software13/COL32431/bi-80329-11/hp_LJP1100_P1560_P1600_Full_Solution-v20120831-50157036_SMO.exe)

  3 downloaded another file and ran it. (Setup_IP4, [192_168_1_5], [NPI073E2D] _it) Not sure where I found this one, but the software prompted me to run.

  Finally, everything works and all devices are wireless printing

• P1102w printer is not "readable by this computer.

  Hello

  I used my laserjet P1102w printer with my macbook pro for about two years, using a USB connection.

  I've never had real problems with the printer and it was working fine with my macbook last Thursday night. I tried to print something on Sunday night but when I plug the printer by USB my computer flashes just a window that says "the disk you inserted was not readable by this computer." He refuses to print all documents and does not appear on the computer at all. I tried to reset all settings for printing on the laptop, but the printer does not always appear. I use Mac OS 10.9.5. I had not brought no changes to software over the weekend I would have thought this would cause.

  I am a student and really need my printer working again as soon as possible. Can someone help me with this problem? I can't think what else to do.

  Thank you, Stephen.

  Hi @SJRamsay11,.

  I see by your post when you connect the USB cable to the Mac you get the message "the disk you inserted is not readable by this computer. I can help you with this.

  Something on the Mac is to recognize the printer such as a hard drive. Because the printer has a feature called Smart Install, which installs only the printing automatically on Windows software.

  Try unplugging everything, make a full stop down on the printer, restart the Mac, and then connect the USB to a Mac, while the printer is still off, then start the printer.

  You have Parallels installed on the Mac?

  Temporarily disable Parallels, for the Smart Install is recognized on the Mac.

  If you do not have Parallels, then we will need to turn off Smart Install to install the printer on the Mac.

  There are two ways that we can disable it.

  Print a configuration page. Printing a Configuration Page.
  Select the method two.

  If the printer has a IPV4 address or the Direct wireless is under tension and indicating an IP address, you can access: the printer Web server integrated and disable the Smart Install from there.

  If you have a valid IP address, type the IP address in the Safari browser to bring up the printer built-in Web server and you can disable the Smart installed on the printer.

  If it does not, you will need to disable the Smart Install the printer on a Windows computer.

  On the Windows computer, go to start, computer, right click the printer CD
  and left click Open in a new window, go to Smart Install utility util/siutility.exe/HP.
  printer or PC - printer select / click on disable.

  Let me know how make you out.

  Good day!
  Thank you.

• When I try tp print a box indicates no printer installed?

  Original title: my hp 1050 printer prints a test page. is set as the default printer. When I try tp print a box indicates no printer installed?

  The printer is a Hewlett packard 1050 J410 series. works great as a scanner or a printer test page... Unable to print documents. It's happened before. I don't remember how I fixed it

  Hello

  There is that side of things for the printer HP. Something must be wrong
  with their driver. There is a slight possibility that you have something running
  originally a strange problem but I would not bet on it.

  Contact HP and ask in their forums.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP printer Install Wizard download cancelled

  I tried to download HP printer install wizard 5 times, and in the last 4 seconds it cancels.  Why would he do that?  I need to install my printer on Windows 8 C6200 series.

  Hello

  have you tried to install drivers without using the HPPIW?

  Try to use the file below and check to see if that can help you:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-110032-1&cc=us&DLC=en&LC=en&OS=4132&product=3194498&sw_lang=

  If the printer connected via a USB port, make sure to keep the cable disconnected until installation request to connect.

• WPA2 and p1102w printer

  I did research on the p1102w printer and attempt to verify wireless security protocols support.  The Group of HP cat unplugged my session without answering why question so I hope that someone here will be able answer my question.  The p1102w does support wpa and wpa2?  If Yes, is it established anywhere?  Thank you

  Hello

  In my view, it will support WPA and WPA2 - see Page 74 of the manual of technical reference on the link below.

  http://h10032.www1.HP.com/CTG/manual/c01996606.PDF

  Kind regards

  DP - K

• No printer installed

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have a Dell printer. which works perfectly on other computers, how ever when I try to ptint on mine (Windows XP) I don't get the message "No printer installed"... Tried to remove the program and re install with the original disc "Dell", but keep getting the same answer "No. PRINTER INSTALLED."

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Go to the website of the printer and download and install the latest drivers for the printer.

• HP Photosmart C4283: HP Scanner/printer install wizard cancelled download when the download

  Looks like I have the same problem as everyone else.
  When you use HP Print or assistant doctor Scan or HP printer Install, it starts downloading the software, and when you get to 100% it tells me that the download was canceled.

  In fact, I found a solution easier.

  Instead of using the tool, I downloaded Windows 8.1 software package (which, by the size of it, was the same as downloaded by the tool) and manually installed without a problem.

• Excel (and PDF) cannot find the printer installed from Windows update - Word may however

  Since the installation of an update for Windows Vista (as requested) last week, I lost some features in a number of programs.  I was able to restore.  Excel Help, when I try to print the printer installed is not found; the same happens when I try to print PDF files, but Word documents seem to find the printer.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• LaserJet P1102w: Printer 'offline' since the upgrade to El Capitan on MacBook Air - using the USB cable connection to print

  Updated the MACBook Air to OS X 10.11.4 El Capitan.  In this process, my printer disappeared.  Apple support had to intervene to get the printer view and print - that was yesterday & took 1.5 hrs.  Today, I tried printing and get the error "offline."  I went through the steps of unplugging the printer and Router 2 x, but always 'offline' message.  Help please!

  Hey @mel1121,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with your Mac OSX 10.11 for the Laserjet P1102w printer machine printing. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. On your Mac, click on your Apple icon, system preferences and printers and Scanners.
  2. Hold down the CTRL key and click the icon of your printer on the left.
  3. Click on reset printing system.
  4. Click on the button "+" in the lower left corner of the screen.
  5. Select your printer from the list.
  6. Click in the box next to and select your printer from the list.
  7. Click on Add.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

   

• my hp lazer jet p1102w printer resume printing via airprint when not available

  Hello

  I have the hp lazer jet p1102w printer. I've upgraded to the latest firmware.

  What is not available in the printer paper and I reload, it does not resume printing via airprint in my ipad.

  especially when I want to print on both sides. I can't resume printing. What should I do?

  Hello

  Once you have loaded paper in the tray, open and close the printer cover. who will resume the print job and complete it.

  Shlomi

• Unboxing and configure the HP LaserJet Pro P1102W printer

  Learn how to perform a unboxing conversion and configure the HP LaserJet Pro P1102W printer.

  For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support.

  This video was produced by HP.

  I hope you find this useful and informative video.