P2V Converter network GigE Point in Dallas to Little Rock?

Similar Questions

• RHEL 5 P2V converter server to support static IP address problem

  Hello!

  I am doing an internship where I set up a VMware ESXi 5.1 environment, and I have to P2V a couple of servers RHEL (5 and 6).

  So now I'm looking for how the VMware vCenter Converter Standalone Client 5.0.1. I've done a few P2V, successfully!

  But it seems that whenever I want to do a P2V, I have to use a different static IP address by using the converter server because otherwise the converter stops at 1% and tries to connect using the converter server.

  What I don't understand, is that I'm only a P2V both, and so the IP addresses I use are reserved and are not of any other machine.

  Does anyone know what is the problem? Because if I have to make a couple more P2V, I'm out of IP addresses I use...

  Thanks in advance!

  Hello

  We were able to identify the problem and it is not in the converter itself, but rather related to the physical infrastructure. The problem is in the ARP cache on the bridge of the target network. After the first conversion, he has cached an ARP entry for the IP address for assistance. When you start the second conversion, the new virtual machine that is created has a new network card with a new MAC address, but the entry door is not aware of this change when Converter Server tries to connect to the help, the gateway sends IP packets to the wrong MAC address and finally they are deleted. When the cache ARP on the bridge which expires - that the problem be resolved automatically (in our environment by default, it is 15 minutes, but it depends on the material specifc and configuration).

  A possible workaround is to generate network traffic coming from within the VM assistance program (e.g. a ping to the IP address of default gateway) which generate an ARP traffic and update the gateway ARP cache. Instructions how to connect using VM are available at http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&externalId=1036746. Once you sign in, you can test anything (same IP invalid target does the job) and the conversion should proceed immediately.

  HTH,

  Ivan

• VMware P2V Converter OS license

  I use a converter P2V and I have a question on operating systems licenses during the conversion. For example, if I convert Server1 (Physics) in a (virtual) Server2, I need another license of Windows Server to activate and which deliver the Server2 (virtual machine) even if it's a copy of Server1 (physical)? I intend to keep Server1 online. I'm a bit confuse about the license part and don't want to hunt be back later.

  Any input or advice is greatly appreciated.

  Thank you.

  Collin

  If the two servers would be active then you definitely need two licenses.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '.

• P2v Converter Linux

  Using Vm Converter 5.0 to P2V a linux server. But get a read only file system on VmLinux file after conversion. I was wondering if anyone knows an m.o. to convert physical Linux vmware using converter 5. I looked, but everything I've found using Converter 4.0 + using Boot CD. For converter 5.0 can I us still need to boot CD or activation of SSH on linux... etc. If anyone can help with a step by step procedure really appreciated.

  Thank you

  Hello

  Option 1

  (1) save the file/etc/fstab

  (2) try to re-create the file/etc/fstab without additional options for.

  LABEL = / / ext3 defaults 0 0

  Try restarting the server.

  Option 2

  Edit the /etc/rc.local

  and add the line at the end

  Mount o remount, rw-/ dev/sda2.

  Let me know if you still have questions

  See you soon

• Bug convert Pixels into Points in PS CC?

  Even if I try to type in a point size for type, photoshop poster "pt" next to the number, but there's always in pixels.

  I am designing iPhone apps, should be in points that allow developers to convert with Xcode. Two weeks ago I used points, but now PS won't let me. I think it's a bug...

  I tried to go in the settings of the PS and change at points units. Still not good. He turned the "px" next to a font size for "pt" but nit Exchange actually the font size.

  Try this reset: Cmd + Opt + shift (Mac) or Ctrl + Alt + Shift (Win) launch you Photoshop start. Press 'Yes' when prompted.

  Benjamin

• Ubuntu p2v - converter fails generic error

  Hello

  I'm new to vmware and I'm trying to teach myself. I have ubuntu 11.10 running on a laptop alternative with converter linux 4.0.1 server. I have the Converter Standalone Client installed 4.0.1 on a windows 7. I have an ESXi 4.1.0 Server I'm a superadmin running on the cluster. I try to use the windows machine to convert machine ubuntu from the physical to the virtual. I'm going the through the wizard and everything seems fine. I click Start, it starts and then stops and disconnects with a very generic error ' error: cannot create the "ubuntu-test-machine" VM. "no other reason given.

  Can someone point me in the right direction? Documentation is limited or my googling needs work because I'm having a hard time to find info on this. It's either outdated, or a bit vague for a beginner. Point me in the right direction and I am sure that I can understand it.

  I appreciate all help. Screenshots attached.

  You must connect to the * Windows * 5.0 server. You don't need to have it installed on the Linux source. After that you can choose to convert a live Linux and there you enter the name of host or IP address of the source. You must have active SSH and allow the roots of ssh remotely.

• How to convert a variable point in fixpoint number 18 bits/4Int and represent in the true HEXAGONAL shape (NOT of FFAE * 2 ^-14 for example)

  As an example of what I would do: floating point number can be encoded as true hexagonal like this (fxp) 18/4:

  -1, 6554565429687500e + 00-> 1001 / 1010 / 0111 / 1100 / 1100 as 9A7CC (9 is the part of the signed integer - 1 MSB beacause negativ). Is there a good way to do this translation?

  Simply mount the FXP for a U32, right shift of 14 bits, and display...

  

• Unknown home network access point that I don't create

  I recently updated my modem on a new one that has a built-in wireless router (I have cable internet) I don't know if that has anything to do with this problem, but now when I open "Network and sharing Center", I noticed that my home network name was no longer "an Internet 3" but something named "RubyCheetah" - a name * I * certainly didn't put in there!  I wonder now if I joined in some kind of home network of someone by mistake and I'm now internet access through its network. I live in an apartment building where I think there are a LOT of wireless spots. Would this be possible? Earlier, I was getting very sporadic bouts with pages not loading or taking always into the for do.

  What I want to do is to delete this "RubyCheetah" completely and start again with another, as if I was installing Windows for the first time and create a home network. How can I do this?  Help, please?

  Running Windows 7 64 bit

  Hi Stewart,

  If you want to remove a connection, just go in your nail connections network the connection in question and press on delete. You will be prompted to confirm, do it.

  Then click on "set up a new connection" follow-up steps.

  Now, if it does not find your connection, it is a different matter.

  If this happens, connect the router via an Ethernet cable and see if you can connect

  Let us know what happens

  B Eddie

• VMWare converter network functionality

  Hi, if I have implemented a work of converter where the source is a standalone ESXi and destination is also a stand-alone esxi, how will traffic go, source send directly to destination or will be the execution flow by when I run the Converter Standalone software?

  Traffic will pass through the machine where Converter server is installed.

  HTH

• convert image into points

  How can I create a fade (in my case, from black to white) using the same individual points of size? I don't want mixed, because the size of the dots varies. I want a fade from the concentration of 100% (black, no space) at 0% concentration (no points). Someone knows how to do this? Thank you!

  Based on the example you provided, you want a dithering. You can do this by setting your gradient then go to Image/Mode/Bitmap and changing the Diffusion Dither method and play until you get something you like.

  You can also do with a gradient layer style.

  

  Hope that helps.

  M

• Table linked Excel. Convert commas in points

  See this thread:

  http://forums.Adobe.com/thread/903846?TSTART=0

  I set up a GREP search in accordance with the instructions of the Haakenlid to the post 11. It works fine:

  _____

  Find three numbers preceded by a comma:

  ,(\d{3})
  

  Replace by a point ("or better IMO one fixed breaking no space," "~ s" in GREP InDesign notation)

  .$1
  

  _____

  Now I'm wondering if it can be turned into a script that can be added to this script (below) which removes the cell INSET so that the operation can be made with a single script.

  I have no experience with scripting, if anyone can help, it would be greatly appreciated.

  _____

  DESCRIPTION: Updates the linked tables and resets the INSET top and bottom of cells

  /*

  In this test, I realized there are ways that one associated Excel sheet

  will be automatically updated (in fact, I was unable to persuade ID do not update the link so)

  I have not actually tested the branch where the link is updated, but I used

  This syntax before on the linked graphics, so it should work).

  Thus, the script corrects overlays on each associated if Excel sheet or not his

  link needs updating. He does not see even from unrelated tables.

  */

  myDoc = app.activeDocument;

  myLinks = myDoc.links;

  myLim = myLinks.length;

  for (i = myLim - 1; i > = 0; i--) {}

  If (.linkType myLinks [i] == "Microsoft Office Excel 2007 Import Filter") {}

  If (myLinks [i] .needed) {}

  myLinks [i] .update ();

  }

  Whether or not we have updated, correct the INSET because it could have been an automatic update

  myTable = myLinks [i].parent.tables [0];

  myTable.cells.everyItem () .bottomInset = 0;

  myTable.cells.everyItem () .topInset = 0;

  }

  }

  That should do it

  //DESCRIPTION: Updates any linked tables and resets top and bottom insets of cells
  
   /*
  
    In testing this, I realized that there are many ways that a linked Excel sheet
  
    will auto update (in fact, I was unable to persuade ID not to update the link so
  
    I haven't actually tested the branch where the link is updated, but I have used
  
    that syntax before on linked graphics, so it ought to work).
  
    So, the script fixes the insets on every linked Excel sheet whether or not its
  
    link needs updating. It does not even see unlinked tables.
  
   */
  myDoc = app.activeDocument;
  
  myLinks = myDoc.links;
  
  myLim = myLinks.length;
  
  for (i = myLim - 1; i >= 0; i--) {
  
   if (myLinks[i].linkType == "Microsoft Office Excel 2007 Import Filter") {
  
    if (myLinks[i].needed) {
  
     myLinks[i].update();
  
    }
  
    // Whether or not we updated, fix insets because there might have been an auto update
  
    myTable = myLinks[i].parent.tables[0];
  
    myTable.cells.everyItem().bottomInset = 0;
    myTable.cells.everyItem().topInset = 0;
  
    // changes thousand separators from commas to periods in every cell in the table
    app.findGrepPreferences = null;
    app.changeGrepPreferences = null;
    app.findGrepPreferences.findWhat = ",(\\d{3})";
    app.changeGrepPreferences.changeTo = ".$1";
    myTable.changeGrep();
  
   }
  
  }
  

• Why a network access point disappears suddenly?

  Original title: why a HOTSPOT suddenly disappears?

  A free hotspot that serves a large part of midtown that never missing at all, has suddenly started to become unavailable for two, three or even one week and then it is back once again.  The absences that never happened for more than two years for MAINTENANCE, or would it be a LOB - even a truck or a bus - blocking the direct transmission of signal path?  Please note that the problem is not the computer, because other computers have the same results (and no router is involved at the end of the receipt).,.

  Thank you so much in advance.
  Josie

  Hello

  You need to ask the people who feed the Hotspot why your free Service is not constant.

  See you soon.

• CS4\5 - an easy way to convert grayscale gradient points?

  Hi people

  I wonder if there is an easy way to do this?

  I work with a file where I want TO create swatches for each color I use to ensure consistency. There are a number of gradients in the document, and I've stored the judgments of the color of gradient in the swatches. So far so good.

  Now, I want to adjust the gradient color stops, but there seems to be no easy way to add a new shade of a color gradient stop, or update an existing shade of a color gradient stop.

  The Swatches palette that appears by clicking the gradient color stop has no button above to add a new shade, for example, and none of the usual sample of creating methods seem to work.

  Is this possible without returning to a workaround heavy?

  Any help is appreciated!

  See you soon

  Richard

  Only by clicking on a term and then dragging the color from the color Panel to the swatches Panel not work for you (translation, uh, repetition based on 1)?

  Also, wouldn't change it > change colors mechanism help here?

• Convert the anchor point tool problem

  I'm new to illustrator... when I want to move the tangents that regardless it only works with the first I catch, another disappears and reappears while I hold one... bug?

  Tacojka,

  What happens if you:

  1) select directly the anchor.

  (2) alt/OptionDrag one of the handles.

  (3) drag handles?

• VMware vCenter Converter Standalone 5.5.0 build-1362012 - unknown internal error trying to P2V Windows Server 2003 SP2

  I have a box of Windows Server 2003 SP2 Standard that fails to convert using vCenter Converter Standalone 5.5.0 build-1362012. After you submit the task in the wizard's GUI, I get "a general error has occurred: unknown internal error". A virtual machine is created and deleted and then a few moments later.

  Create the virtual machine

  192.168.1.201

  Completed

  Search entity by UUID

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Delete the entity

  SRV-cspnsn. CSPNSN.local

  Completed

  The destination is VMware ESXI version 5.5.0 build-1623387 managed by vSphere Client version 5.5.50 build-1618071. The destination data store is a 5.60 VMFS volume with block size of 4 MB, on a local SATA HDD with 923, 50GB.

  Both machines are in the same network and have no any King or firewall or ACL in switches.

  In the log file, the only error is "error"Ufa.HTTPService"] Impossible to read the application; "flow: io_obj p:0x03403f24, h:-1, < tube"\\.\pipe\vmware-converter-server-soap">, < pipe"\\.\pipe\vmware-converter-server-soap"> >, error: class Vmacore::TimeoutException (Operation timed out).

  Any help would be appreciated.

  Thanks in advance.

  Hi all

  Once the converter VMware-converter-en - 5.5.1 - 1682692 does not work, with a touch of friend uninstall the 5.5 version of Converter Standalone Client, look for the VMware converter version - 4.0.0 - 146302 and install this version to the other machine. No not that I had to be Converter, but the windows 7 Pro 64-bit.

  After this race, the Standalone Client 4.4 Converter and everything work fine.

  Now I have the P2V converted and good machine, as was the real operation!

  I thank all of you.

  Best regards

  ADAJio