P870 PSPLFE satellite - cannot start update BIOS - need to fix the NumLock key

Similar Questions

• Cannot start update BIOS on Qosmio G30

  Hello

  I ve a Qosmio G30-188 (PQG30E) and after a few problems and a few messages that I read on the internet I wanted to update my BIOS. So I went to the page of the selected Toshiba driver my laptop downloaded the update to the BIOS, but it does not work.

  Whenever I get the error that this BIOS is not supported for my computer. After some more try to install it, I started to wonder. Then I found the option where a Toshiba tool can find what laptop you automatically. So it has detected the same laptop I chose before and the BIOS-update, he gave, it was the same that I already found.

  So I got the same problem again.
  The version of the BIOS that I have is: acpi bios ver 1.40

  Someone has ideas how to upgrade the BIOS?

  THX

  Hello

  What kind of problems do you have? Perhaps, the update of the Bios is unnecessary at all.

• Satellite A200-10W - update BIOS need

  I've got A200-10W for a few years and a year and a half I decided to change the form of Vista 64 bit do Windows 7 64 bit, I installed it, everything worked fine until a month ago what problems began to occur.

  When the BIOS screen it shows sometimes freezes and sometimes takes a minute to move to Windows 7 loading screen, I checked the BIOS version and it's 1.40 (yes I'm a fool to update only not earlier), so I decided to update the BIOS but I can't find no updates except 1.80 for Vista 32 bit can someone please help with this? =(

  SRY for grammar bar

  Hey,.

  I agree with Akuma. You can always try the 32-bit version of Vista, it s has nothing to do with your 64-bit system. If it s is not compatible, you get an error message.

  But unfortunately I doubt THAT BIOS will help you. If the computer hangs at the BIOS screen, that it might be related to hardware. Possibly peut t computer recognize part of properly hardware like RAM, HARD drive, or something else.

  Until you try to update the BIOS to load the defaults (F9 key). Save & Exit new parameters and test again if the error occurs or not.

• Application of Satellite L300 PSLB2E update Bios

  Hello. I'm sorry but I don't know where to ask for a request for update of the Bios.

  As we all know that x 3100 is a new graphics chipset and Intel is developing to make it worked better and better.
  Currently, the site of intel, there is a new driver 15.9 but it has not been updated on the Support from Toshiba site.

  But I managed to install the driver manually, I can't update the Vbios version * 1588 * such as suggested by Intel (Vbios can only be updated by the TSR and the main bios version) to fix the bug of corruption of the memory and BSOD that exist in 1436.

  I hope Toshiba will have a new update of the Bios (Vbios is sufficient for just) to fix the current bugs caused by the Intel Chipset.

  Thank you.

  Are you talking about the chip for desktop PC Intel or chipset for laptops?
  I m not a L300 owner but to my knowledge, the L300 supports the Mobile Intel GL960 chipset.

  You know that Toshiba portable computers are equipped with the BIOS that has been specially configured for the only series from Toshiba. Thus, it also manages its own characteristics.
  You know that Toshiba use own graphics drivers.
  Original published by graphic manufacturer (Intel, nVidia, ATI) graphics drivers are not the same as drivers Toshiba.
  So Don t mix it. It s recommended to use the graphics drivers from the Toshiba page (not Intel)!

  With regard to the update of the BIOS;
  I noticed that from time to time (any series of notebook) BIOS updates are released, then published on the page of the driver. I think it's only a matter of time when the new update will be available.

  See you soon

• I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do

  I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do?

  Hello

  Your question is beyond the scope of these forums.

  Please use the following links for that matter.

  Network Infrastructure servers Forum:
  http://social.technet.Microsoft.com/forums/EU/winserverNIS/threads

  Category of the Windows Server:
  http://social.technet.Microsoft.com/forums/EU/category/WindowsServer

  Concerning

• I tried Windows 10 and after 10 days of hell, I asked them to uninstall.  But went with is my old Acrobat Reader.  I tried to use it, but it says that my browser plug is missing and that it cannot start because MSVCP120 is missing on the computer too.

  I tried Windows 10 and after 10 days of hell, I asked them to uninstall.  But went with is my old Acrobat Reader.  I tried to use it, but it says that my browser plug is missing and that it cannot start because MSVCP120 is missing on the computer too.  A friend told me that I have to uninstall and then re-install again.  I am a 71 years who does not know what to do.  Help

  Hi jimm13886845,

  Of course I'll help you get this problem is resolved.

  Run this cleanup tool to uninstall any old version of Adobe Reader Download Adobe Reader and Acrobat tool - Adobe Labs.

  Restart your computer and then installer you old version of Adobe Reader using this link Adobe - Adobe Acrobat Reader DC Distribution.

  Let me know if you encounter a problem, we will be happy to help you.

  Kind regards

  Nicos

• Download windows 7 starter OA MEA I also have the product key

  I have acer notebook... I want to download windows 7 starter OA MEA also I have the product key... where can I download it although I have widows running on the laptop, but it isn't an a liscenced? I'm not very good with the pc... I need simple explanation :(

  See the following topics:

  http://techingiteasy.WordPress.com/2012/05/02/how-to-reinstall-Windows-7-Starter-Edition/

• I keep getting calls from some SAV microsof telling me I need to hold the CTRL key while pressing the key from microsoft. WHY do you want me to do this?

  I keep getting calls from some SAV microsof telling me I need to hold the CTRL key while pressing the key from microsoft.  WHY do you want me to do this?

  I keep getting calls from some SAV microsof telling me I need to hold the CTRL key while pressing the key from microsoft.  WHY do you want me to do this?

  It's a scam.  I'm glad you don't fall for it.  All other calls suggest that tell you the caller you brought calls to the police who should dissuade continue to harass you.

  See the following links for more information:

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  http://www.mypchealth.co.UK/GuideScam.php

  http://ask-Leo.com/i_got_a_call_from_microsoft_and_allowed_them_access_to_my_computer_what_do_i_do_now.html

  https://krebsonsecurity.com/2012/08/tech-support-phone-scams-surge/

  http://bottomline.nbcnews.com/_news/2012/10/03/14206238-us-works-to-shut-down-tech-support-scam?Lite

• Satellite C660 - BIOS Update Failed, need help restore the BIOS. BAK file

  Everything by updating the system BIOS froze in step 7 to replace the code of the BIOS, needless to say that the laptop does not start because the BIOS is now corrupted.

  I have the BIOS. BAK but need advice on how to restore the BIOS. I copied the BIOS. BAK on a key usb and it connected to the laptop computer and then powered on the system (now I tried the F, F2 key together). I can see the usb key will Flash initially but is not, clearly, progressing with the restoration.

  I hope someone might be able to advise the use of the BIOS. BAK file to restore the BIOS.

  Unfortunately I cannot help you with this but check it please this interesting thread - http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395

• Satellite A105-S361 - update Bios do DVD cannot reboot

  Hi all.

  I have a Satellite A105 S361. I guess I got the BIOS 1.70 software.
  because there are two possible updates for her in the Toshiba download website.

  So, I've recently updated my BIOS v2.0. In fact, he warned that after the update
  It would be impossible to return to v1.70, but I never thought that it might cause some
  problems.

  After the update, now I am unable to boot from the DVD-ROM. I tried
  change the boot priority in the bios, by pressing 'C' (stands for CD)
  in the trunk to the top, also press F12 to bring the boot list. Also
  I tried with my recovery cd and about 5 linux CD bootable.
  None of this has been successful and if I remember the update of the BIOS
  and eliminate the possibilities, which can be the cause of the problem.

  Then I'd be extremely grateful some hep with this issue to make it possible
  to boot from the DVD ROM.

  Best regards.

  As far as I know, this series laptop designed for the American market and as a result, you must use the BIOS from the Toshiba page we.
  I hope you have done it and used the good BIOS. Bad or not compatible BIOS can do some problems!

  However, the fact is that it of not possible to reverse the BIOS to the primitive version on the simply average. In your case, that only a technician of the ASP was able to help you but I wonder how the BIOS update would affect booting from the CD/DVD drive. IF the CD/DVD drive has been recognized and then a boot from CD or DVD should be possible.

  You attempted to set the BISO default settings? Check it!
  BUR if it doesn t help has then contact ASP in your country!

• Satellite M10 and update BIOS

  Hello

  trying to make my first laptop BIOS update on my BIOS 1.40 M10. Date of 2003.
  I downloaded version 1.50 updated windows and where to extract the zip file and it starts to run I get "Toshiba common modules is not installed.

  But back to the driver downloads and download Modules common cmod-en20071113104042 and install. Run the BIOS update and I get the same common Modules not installed.
  Anyone can shed some light on my problems?

  The machine performs a clean install of XP Professional Service pack 3 and has BIOS version 1.40 and 512 MB RAM.
  I want to upgrade the RAM and have read on Toshiba takes the M10 supported 2 GB of RAM with the bios update.
  At the minute when I go to crucial.com and scan the system tells me max supported is 1 GB.

  No answers or help would be welcome.

  Hello

  At first, I must say that the BIOS update will not change with the support of RAM. It depends on the hardware platform and not update the BIOS. So it's not going to help at all. Your laptop can handle with 2 GB of RAM maximum end of the story.

  Satellite Pro M10 is old enough laptop model and I am 100% sure, update the BIOS, as a file is OK, but right now, there is no SP3 and I can imagine that there is the problem.
  So if you are satisfied, how does your laptop leave and enjoy this good old classic. Don't don't need BIOS update at all.

• Satellite Pro 490 update BIOS

  My Satellite Pro 490 Notebook refuses to start recently and demanded an update of the BIOS. I checked on the Toshiba site for advice and downloaded the correct BIOSware on another computer. I created a bootdisk BACK (on advice) and saved the BIOSware to this, and I started the laptop with the parallel diskette in the external floppy drive.

  He whirred and buzzed and seemed to do its thing, but when I stopped and restarted for WinXP, it was not recognizing my kepboard or integrated mouse. He sometimes recognizes a USB external mouse, but he doesn't always know what I want to do : o ( )

  So I did it once again, this time, after you restart with the floppy in the drive, he bed 'to go '. "and shows me the gubbins of copyright of Microsoft Corporation and then takes me to the A:\ command prompt and still does not recognize my kepboard or the mouse, just the weird key here and there.

  Before I got the ban at the end og the garden, is - someone give me advice? Is there anything else I could try? Anything? =o r

  Hello

  I have yesterday activated download site and new version is now. I tried it on my computer and it works fine.

  Good bye

• Satellite A300 - after update BIOS black screen

  Hi all
  I just applied the update to the BIOS on my Satellite A300. After the update is successful, the system carries out a restart. Now when I try to start it I get no display, I can hear the proceedings to hear it, the CD player, the DVD, playback led flashes.

  The ASP Toshiba rang me (phone call), the motherboard must be replaced after a bios update, but it is very expensive for me :(
  Please can you tell me if they are a way to fix it without replacing the motherboard? The bios is an Insyde and according to the site Internet the bios bios [recovery technology | http://www.insydesw.com/press/2008/press_060308.htm]. I guess that the ASP does not know that.

  Please can you tell me how to start the recovery procedure it is possible (combination?),.
  Any help on fixing the laptop without replacing the motherboard will be much appreciated.

  Hello!

  I think that the ASP is just and in the worst cases, the motherboard should be replaced.

  You can try to remove the battery and the AC adapter. Wait one hour and then connect the AC adapter and the battery and try again.

  If it doesn't work you should go to an ASP. Perhaps a BIOS reset can solve the problem, but it can be done from an ASP.

  Good bye

• Satellite A200 - 10W PSAECE - BIOS need for Vista 64-bit

  Hello

  I'm having problems trying to update my BIOS under Vista 64-bit of the system. The plashnt.sys driver generates an error when loading.
  On the update of the BIOS page I can't find no 64-bit BIOS update for my laptop Satellite A200-10W (PSAECE). Also I've seen most of the computers portable ETA is updates of BIOS of 2009 and my update to the newest BIOS comes from 2007 (version 1.80 for Windows Vista)!

  The reason why I'm trying to update my BIOS:
  I have recently installed 4 GB of RAM on my laptop, the screen of the BIOS reports 4 GB but during POST, there are only 3! Vista reports also only 3 GB of physical memory total. I ran a series of landmarks and notes I got using 4 GB are well below the marks using only 2.
  Memory modules have been tested on another laptop and none of these problems has occurred (another laptop of the manufacturer).

  So I really need a sollution to update my BIOS and prefferably a BIOS update of 2009 available for download.

  On the other hand, I was looking for specifications of my laptop on the Toshiba site and I couldn't find my model on the current models, or models discotinued page. In 2007, when I bought the laptop, it was listed as new on the current page of models, so I expect at least to see it in the abandoned list.

  Thank you for your time!

  > 1. Why there is no updated BIOS newer than that of 2007 and
  There is no update of the most recent BIOS as Toshiba didn t release new updates.
  Why? Who knows maybe a new update is not necessary.

  > . Why my laptop is not listed in the discontinuous model (Satellite a200 - 10w psaece)
  Why should it be included as a discontinued model? The A200 series is not very old... so I n t think that this series could be abandoned

• Satellite P10 874: update BIOS wrong changes the serial number?

  Hello

  I have Satellite P10 874, my model number has erased the background after years of use.
  I recently did an update of the Bios of the Web from Toshiba site and realized more late it was for the SP10E models.

  Well my system did not fall down. (Part no) model number change if you update with a version of Bios, not intended to be your system?

  My system is still under warranty, but the new model series/number combo is shown as invalid global law database. My USB ports don't work anymore after that it showed a message of power surge.

  I need to go to the customer Service. Is there a way to retrieve my originial model no and not?

  Any help will be much appreciated.

  Concerning
  lejoe

  A 'bad' Biosupdate does or does not replace the modelnumber of your machine. So you don t have to worry when you give the machine to a service centre, they have the ability to retrieve your serial number with their system and understand the modelnumber of your machine.

  With regard to your USB ports: send the machine to your local concern for service-center and Don t on the modelnumber stuff. Your machine is still under warranty and since they will change about your pcb, your worries on the bad bios system is useless.

  Furthermore, I can't imagine that you seriously a bad bios Flash, since the machine during the biosupdate ususally scream if you try to Flash a bios wrong on it.

  Welcome them