palette brush control display seems to be missing

Similar Questions

• In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6.

  In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6. It was very useful and should be added to version 6.

  https://support.Mozilla.com/en-us/KB/how-do-i-customize-toolbars

  If you mean the - and + Zoom control so it is always there in Firefox 6.0

  or
  View-> Zoom

  Edit: I see that you are using Windows 7 where the menu bar is hidden as a Firefox orange button by default. Some menus objects much may not be visible in the menu of the Firefox button. Show the Menu bar or use the - and + Zoom controls buttons.

• A range of editing seems to be missing a few options.

  It's so weird... I'm trying to add a library by editing a set palette (following the signs linked here). However, I seem to be missing a few options, namely the possibility of changing the set... What don't get me?

  I tried 'right click' everywhere to see if there are hidden menus. So far I have not found...

  I've attached a screen shot here.
  Thanks for the help.

  So it's fun... it seems that when Labview is spawning new windows containing editible functions... they caused partially off the screen.

  According to me, who did. Thank you.

• HP Officejet 6700 Premium - printhead seems to be missing

  Seems to be a common problem with these printers - me too I got the error message "the print head seems to be missing, not detected or badly installed"-I tried all the suggestions of troubleshooting with no results.

  I have never had any problems with HP in the past, and since 1999 have bought only products HP - when things had to be repaired under warranty, that these were always made in a very quick way - HOWEVER...

  This time is a totally different story - please someone at - he found a solution yet or is that a case of replacing the printer - can someone help!

  Welcome to the @debz143 forums, I hope you're well

  I read your post about the error "Missing or has no print head", you receive on your Officejet 6700. If you have tried all the troubleshooting, including a power reset (see below), give us a call directly to see what your replacement of the printer or trade options are with HP.

  A "Missing or doesn't have a printhead" Error Message is displayed on the printer or on the computer

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Have a great Tuesday!

• S.o.s. Keychain seems to be missing after that put 10.11.2 updated!

  I had some keychain problems since the 10.11.2 updated and decided that I would try S.o.s. Keychain but it seems to be missing from the menu. Anyone else seeing this?

  Yes, me too?  everyone knows this change?

• HP Deskjet 3526: Received Message that ink "seems to be missing or damaged.

  Nice day.

  I received the message in cartridge "seems to be missing or damaged.  I bought and installed

  a new HP cartridge and the error message remains.  I tried blocking down and cutting off the current, but cannot

  do change.  Any ideas?

  Thank you

  George

  Hi @Gjedlicka1

  Sounds like the cartridge and the printer does not communicate. I suggest to remove the cartridges and contacts metal bit wiping on the cartridges. Also take a look inside the printhead to see if there is any obvious damage where the cartridges sit in.

  Here is a link to a document with instructions for troubleshooting (that's for a different model of printer than the one you have, but the recommended steps are the same): http://support.hp.com/us-en/document/c04313139

  Hope this helps, good luck

• I had to restore my windows XP and my mail to my email account seems to be missing, but my contacts are intact.

  I had to restore my windows XP and my mail to my email account seems to be missing, but my contacts are intact. How can I recover my old emails.

  See www.oehelp.com/OETips.aspx#4 as the Bank of likely messages of lost.  If all goes well, he is still there.

  Steve

• The volume control in the taskbar is missing

  The operating system is Vista.  The volume control in the taskbar is missing.  How can I get that back?  My email is * address email is removed from the privacy *.  Thank you!

  Hello

  1 Please reboot nothing so interfere with this process.

  Click with the right button on Taskbar - Properties - tab Notification area - check box Volume - if it is grayed out
  Then, use this link. (Ditto for power, clock and network.)

  How to enable or disable the system tray in Vista icons (there are several methods
  "(et vous devrez peut-être utiliser l'ensemble)."
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  If necessary: a Mr Fixit

  System icons do not appear in the notification area in Windows Vista or in Windows 7 until you
  Restart the computer
  http://support.Microsoft.com/default.aspx/KB/945011

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP officejet 6600: print head seems to be missing, not detected, or incorrectly installed

  does not print hp officejet 6699 - gives message "print head seems to be missing, not detected or installed incorrectly."

  I unplugged the instructions and it does not work.

  I replaced all the cartridges, and it does not work.

  It is more than one year warranty and I do not know where to take.

  I didn't have to buy a new one immediately.  The life expectancy of an all-in-one now is about 2 years old?   Can someone tell me what to try?  Thank you!

  He looking as if the printhead has moved or is not seated correctly in the printer? Try to gently move it and it sits evenly.

  There is an update to the firmware of your device which can help. You can find it here.

  Thank you very much

  Michaele

• drive seems to be missing

  My drive (D :) seems to be missing. I have a 300 GB HDD partitioned into 2 half popular with Windows 7 Home Premium-32 bit.

  When I go into computer management/storage/disk management it shows as a healthy (OEM partition), but the letter (d) isn't here, and you can't right click.

  I've tried everything. Made scans - no viruses - everything works beautifully.

  Does anyone know how to restore the drive?

  I can't do the system restore.

  Hi RosalieH,

  Please see the post below with a similar problem and fix possible:

  http://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/2b75de6a-82DC-4bb0-a7a3-1811a253bbea

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• See Menu &gt; display theme option is missing. How and where should I do?

  I would try to improve the legibility of PDF documents in Acrobat DC by changing the display of light to dark gray theme. However the View Menu > display theme option is missing? I tried to run the updates, but there is none is available.

  Ideas anyone? If this the wrong forum if you please direct me to the correct forum.

  The classic way WORKS LIKE older versions. You buy a license permanent (or upgrade). You download the software as it is released. There are bug fixes. After a year there will be new features or you can choose to buy an upgrade.

  On the other hand, the CONTINUOUS version updates regularly and continuously into small pieces. Finally, we imagine, the classic will catch on a paid upgrade.  You get the continuous version if you subscribe.

• HOWTO hide CC 2015.1 applications bar - option seems to be missing (windows)

  Hello

  I have the current first 2015.1 (Build 9.1.0 (174)), windows 7 64 bit (Version 6.1.7601)

  The new Option to hide the title bar of application seems to be missing in my system. Because I have a German keyboard, the preset shortcut is not available for me.

  How this option is called in the keyboard shortcuts? (English)
  Or maybe missing my system somehow? The other new features are working fine for me.

  I searched a bit. But in my shortcuts nothing refers to hide the application bar.

  Online I could only find the info that it should work with ctrl + \ and some videos of people it show on a Mac.

  Thank you very much

  The best

  Stephan

  PS: If someone at - it a way to hide even the menu bar, it would be very appreciated

  It seems that there is a shortcut, that you cannot change.  To use the feature, you need a keyboard with the appropriate keys.

• I have an invisible background and I want to just use a bursh paint to draw lines thick som to create a cache. the brushes do not seem to paint.

  I have an invisible background and I want to just use a bursh paint to draw lines thick som to create a cache. the brushes do not seem to paint.

  Hi Normannixon2,

  Could you please confirm whether the background is Transparent or white.

  Also when you use the Paintbrush tool, please check the opacity and flow of the Brush tool.

  Kind regards

  Tanuj

• Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool liquify (photoshop cc 2015): what should I do?

  Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool of liquefy; I can't change the size of the brush or hardness. OS win 7 Professional 64 bit, wacom tablet intuos 6.3.14 - 1 driver s pro, Photoshop 2015 CC worm.  2015.0.1 20150722.r.168

  What are your settings of GPU acceleration?  As I understand it, the Alt right click size and hardness adjust needs acceleration GPU to be turned on, but I have a feeling Brush hardness is always set to easy when using fluidity.  You can still see the quick mask as representation of the soft brush when Alt right click, but you can't change the hardness.

  Is that you can change the brush size and pressure (framed in red in my screenshot) Alt right click drag left and right changes size and down to pressure changes, and you can see what is happening in real-time by looking at the sign on the right.  It works independently of your acceleration GPU (IME) settings, but you don't get the effect of soft red quick mask.

  

  Does this fit with what you see, or you are not able to change things at all?  If not, then I've always found that fluidity consumes system resources, if you could check the Task Manager > Performance tab to see what kind of RAM and CPU use is using the fluidity.  That's what I see after direction the lens above with a big brush continuously for 10 seconds.  Note This is on a fairly quick NLE System.

  

• soften and harden a brush (control + Option) changed

  they changed the ability to soften and harden a brush (control Option) now, changing opacity. We know how to change this back or other loading the key what now?