Palm 3245 Bluetooth keyboard and metal case OEM

Similar Questions

• Bluetooth keyboard and mouse Lag

  MacBook Pro retina end of 2013

  OS X El Capitan 10.11.4

  I have finally upgraded to El Capitan in Yosemite. I never had any problems with my keyboard and mouse before. However, immediately after the upgrade I experienced lag/stutter my Magic Mouse. In addition, my keyboard is sometimes unusable. I hit the SPACEBAR and my computer will insert 5 +. I'll hit back and it will delete entire words/lines.

  I tried...

  1. restart the computer.
  2. bluetooth disconnection/connection
  3. keyboard and mouse of disconnection/connection
  4. Remove and repair the keyboard and mouse
  5. restart the computer several times :-)

  Nothing seems to work. Any ideas/suggestions?

  Article Apple > If your Apple wireless mouse, keyboard or the trackpad will not work as expected - Apple Support

  I is not correlate your measurements with those of article-, but from scratch, as if the devices were NEW seem logical

• Connection of several requests to reboot, crashes, breakdowns of mouse and a Bluetooth keyboard and other problems

  What is happening these days with the Apple OS software?

  Now up to a dozen connections different (clouds, messagehelper etc etc etc) some of which recur several times before finally accepting a dial-up connection and go.

  Frequent kernel panic / crashes.

  Inexplicable failures of the mouse and the keyboard, especially with the Bluetooth Apple mouse (unresponsive, key in several characters without being hit, etc.)

  More and more, my Mac (versions which I used since the 1 MB Mac Plus) behaves like a piece of scrap metal Windows.

  I use the latest version of the software system on a late 2012 27 "iMac. I'm not running something strange or stressful on the system-it is a very 'vanilla' system And, Yes, I already have all the regular maintenance and troubleshooting tips. What is going on? The system just seems to be more bug and unstable on all fronts and worse yet with each new version of the system software.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Microsoft Keyboard elite & Mouse Elite Microsoft Bluetooth keyboard and Bluetooth mouse does not work on windows 7 64 bit.

  Hi I am trying to install a keyboard & mouse that was purchased off Ebay new and in perfect condition but what installation stated that he has

  problem of compatabillty with this product - any help with this would be appreciated. I am running windows 7 64 bit

  Crunchie50 thank you.

  Original title: Microsoft Keyboard elite & Bluetooth mouse

  Option 3

  I wish that you download and install the latest drivers.

  Check out the link-

  http://www.Microsoft.com/hardware/en-us/d/Keyboard-Elite-for-Bluetooth

  This link shows not all drivers

• Bluetooth activate the keyboard and the mouse does not

  My compatible bluetooth keyboard and mouse do not work.  I tried to re - install using the disc Bluetooth wireless keyboard and mouse.  However, once you have started the program, I get the following error message... "" Sorry this version of the software is not compatible with your operating system. ""

  I have re-installed the software even before, but this is the first time this type of message has developed.

  Any idea would be appreciated on how to fix.

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  How to setup a Bluetooth connection.

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  The problems with Bluetooth devices

  See you soon.

  Mick Murphy - Microsoft partner

• Bluetooth mouse lag when Bluetooth keyboard is connected

  Hello

  I recently bought a Lenovo Thinkpad with windows 8, and I noticed a really annoying problem. I have a Bluetooth mouse and a bluetooth keyboard and my keyboard works fine, but when my Bluetooth keyboard is connected, my Bluetooth mouse is REALLY bad. If the keyboard is off then the mouse works great, only it messes up if the two are connected at the same time.

  I have seen several discussions on the Bluetooth mouse problems when playing games or transfer of data, but mine does all the time if I have my keyboard connected at the same time.

  Is there anything I can do to fix this?

  Troubleshooting Wireless and Bluetooth® questions Check and reset power check the (rechargeable) batteries

  Try to charge the unit. It can take an hour or more to fully charge your device. See the documentation provided with the device.

  Notes

  • The software can give warning of low battery. However, the State of the battery are not accurate if there is a problem connecting Wi - Fi. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article.
  • Some rechargeable batteries may need to be replaced. For more information on batteries, see the documentation provided with the device.

  Check the batteries (non-rechargeable)

  1. Make sure that you have installed the correct type of batteries in the device. For more information on batteries, see the documentation provided with the device.
  2. Replace all batteries with new batteries.

  Note

  The software can give warning of low battery. However, the State of the battery are not accurate if there is a problem connecting Wi - Fi. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article.

  Reset the power of the device

  1. If your device is equipped with a power switch, turn off the unit.
  2. If your device is equipped with removable batteries, remove the batteries and reinstall them. Make sure that they are correctly positioned.
  3. If your device is equipped with a power switch, turn on the device.

  Look for the software updates Check for Windows updates

  1. Click Start, click all programs, and then click Windows Update.
  2. Download and install the updates and priority updates custom, especially those related to the material.

  See the Readme file

  • See the Readme file for more information last minute product.

  Check the USB connection between the computer and the transceiver unplug and reconnect the transceiver.

  1. Disconnect the wireless transmitter/receiver and then plug it back.
  2. If the wireless transmitter/receiver is plugged into a USB hub, disconnect the hub, and then plug it in again.

  Plug the transceiver wireless to another port on the same computer.

  • If you have several USB ports, plug the transceiver wireless on a USB port different on the same computer.
  • If the wireless transmitter/receiver is plugged into a USB hub:
    1. Plug the hub on an another USB port on the same computer.
    2. Make sure that you use a powered hub that is appropriate for the powerful high USB devices.
    3. Try to plug the transceiver wireless directly into a USB port on the computer.

  Refresh the wireless connection all other devices connect wirelessly to Microsoft.

  1. Press the button on the wireless transmitter/receiver.
  2. Press the button connection on the underside of the unit.

  Optimize the signal check the placement of the wireless device.

  The wireless transmitter/receiver and the device must be correctly. Try the following solutions:

  • Place the device wireless closer to the wireless transmitter/receiver.
  • If you have a mouse and a keyboard, and they are both wireless, place them equidistant from the transceiver.
  • Turn the transceiver on the side or upside down.

  Some objects not wireless and wireless may cause interference with your wireless phone. To avoid interference from the transceiver, avoid using your device near objects such as:

  • Wireless network devices
  • Cell phones and wireless drill
  • Remote controlled toys
  • Microwave ovens
  • Cables parallel to the wireless transceiver cables
  • Metal surfaces in contact with the unit
  • Other transceivers and wireless pointing devices

  Setting up a Bluetooth device

  You can use the following information to help you resolve a problem with your device (keyboard or mouse) Bluetooth wireless.

  Check the connection between your computer and the transceiver Bluetooth

  • Make sure that Bluetooth is on.

    If you connect your device with an internal Bluetooth connection, make sure that wireless connections are active. Many laptops have a switch, a key or keyboard shortcut that enables wireless connections.

  • Turn on Bluetooth on your computer if your mouse does not have its own transceiver. If your mouse does not have its own transceiver, your desktop, laptop or laptop must have a two-way radio built into the computer, or you must use a non-Microsoft external transceiver. How the mouse will connect to the computer by Bluetooth, and how to turn on Bluetooth, varies depending on how it is implemented on the computer. You may need to contact the computer manufacturer or the manufacturer of the Bluetooth transmitter/receiver to find out how to activate Bluetooth on the computer and how to add a device to it.

  Refresh the connection Wireless to your Bluetooth device

  • Pair your Bluetooth device to your computer.
  • Re-establish a connection without wire if your computer does not detect a device compatible Bluetooth Microsoft if you try to use a Microsoft wireless keyboard compatible Bluetooth or mouse and the input device does not work, it is possible that your computer does not detect the device. To resolve this problem on a Windows computer, restore the link wirelessly with the computer. For more information, see the article of the Support Microsoft 811798 to http://support.microsoft.com/kb/811798

  Solve a connection failure when the installation software can connect to a Bluetooth Microsoft compatible device

  During installation, if the installer is unable to connect to the device via a Bluetooth connection, you must change the transmitter/receiver to use a Bluetooth mode managed by hardware.

  For more information, see the article of the Support Microsoft 953694 to http://support.microsoft.com/kb/953694

  Establish a Bluetooth connection when a device does not respond

  If the Bluetooth connection cannot be established, you may need to remove the device is unresponsive system and then add it again.

  1. Click Start, click all programs, and then click Windows Update.
  2. If the Bluetooth device is not responding is listed, select it and then click Remove.
  3. Click Start, click principally made programs, click the Microsoft mouse, and then click connect Bluetooth mouse.
  4. Follow the instructions in the wizard to connect to your device.

  Why is there a delay before a Bluetooth mouse answer after it has been idle

  To extend the battery life, Bluetooth devices go into hibernation after 8-10 minutes of inactivity. It may take several seconds for the Bluetooth mouse to reconnect when you resume using it after this period of hibernation. Thus, you may notice a delay between the time that you use the mouse and the response on the screen.

  Use other Bluetooth devices with Microsoft for Bluetooth wireless transmitter

  Bluetooth wireless technology allows you to connect several devices to your computer. You may be able to use other Bluetooth devices with Microsoft for Bluetooth wireless transmitter, but this connectivity is not always supported by Microsoft.

  For more information on the use of other Bluetooth devices with Microsoft for Bluetooth wireless transmitter, see the documentation provided with the device.

  For new devices, download the latest version of the software from the Web page of software downloading material.

  Connection of the keyboard of laptop Wedge for a tablet PC

  By default, the keyboard pairs Bluetooth Mobile from the hold with most tablet PC through safe simple pairing (SSP) with an authentication key. Some tablets, however, may not support SSP with an authentication key.
  In order to pair your keyboard hold such a Tablet Mobile successfully, use the following alternative pairing mode.

  Associate your keyboard by SSP without a password

  1. Hold down the Fn key as you press and hold the Connect button located under the keyboard. After 3 to 5 seconds, a small light on top of the keyboard flashes green and Red alternately. This means that your keyboard is detectable in your tablet in 6 minutes.
  2. On your Tablet PC, on the Start menu, select Control Paneland in category view, find the material and audio.
  3. Select Add a device.
  4. When the keyboard is listed, select it and follow the instructions to pair your keyboard Wedge with your tablet with success.

  Note
  If you want to associate your keyboard with a tablet or another computer that takes in charge the SSP with an authentication key, hold down the Connect button only.

  A keyboard or a Bluetooth mouse fails to reconnect after being left idle

  After you have used is not the keyboard or your Bluetooth mouse for a while, you may not be able to use the device again without rebooting the system or by turning your Bluetooth radio and turn it on again.

  For more information, see the article of the Support Microsoft 2758967 to http://support.microsoft.com/kb/2758967

• Cannot connect a designer Bluetooth keyboard Windows with my Mac?

  Hello world! I just bought a Windows Designer Bluetooth keyboard and mouse to use with my Macbook Pro 13 inch, purchased mid-2012. Perfectly pairs mouse but the keyboard never seems to connect! I have installed El Capitan. I see the keyboard listed in the Bluetooth devices window, then I click on the button in hand. It asks me to put in the passcode and when I do it says connected for a few minutes but keeps turning the little wheel beside the device and it will never really connect! I tried again and again! There, can anyone help?

  According to Microsoft, the keyboard has limited functionality with Mac OS 10. apparently there is a button by battery only if held pressed for more than 3 seconds puts the keyboard in mode coupling, if not under bluetooth, see if you can remove it as a favorite and try again

  Sorry I couldn't help you more

  JB

• Iconia A500 Bluetooth sees my A200 but not a Belkin Bluetooth keyboard.

  My Iconia Tab A500 Bluetooth will not detect a Belkin Bluetooth keyboard.  The A500 is running Android 4.0.3

  My Iconia Tab A200 detects and pairs at the keyboard without any problems.

  The A200 and A500 discover each other and pair up without any problem.

  Please - Suggestions?

  Went and got a GE Bluetooth keyboard and it connected first time.

  So, we'll keep the Belkin with my A200 and A500 with GE keyboard.

  Go figure!

• How re-pair the bluetooth keyboard & numeric keypad - he will not give me a pairing code.

  I'm having a problem, try to re - connect my Bluetooth keyboard and numeric keypad.  First my keypad has been properly installed and works fine, but then when I tried to add the keyboard that I clicked on the number pad icon again once and he gave me a code to enter, I canceled just thinking it was already installed and working, and I didn't need to do.  Big mistake!  Now I could not do re-paired again.

  After talking with a guy tech at Staples, I disabled bluetooth for my laptop completely and then distributed in the computer and re-enabled Bluetooth.  I was able to add my mouse still fine, but now the keyboard and the numeric keypad gives me the same error and won't let me pair.   The message is:

  Pairing failed.  An ocrred of error during the process of pairing with Microsoft Bluetooth Number pad.  Make sure that the device is discoverable, and then click Retry.

  Well, I did it several times but without success.  He won't give me a code for one of these pair again.

  I use Windows XP.

  Can anyone help?

  Thank you!

  Penny

  Hello

  You can try the solutions listed in the articles below and check if that helps.

  http://support.Microsoft.com/kb/838398/en-us

  http://support.Microsoft.com/GP/cp_keyboards_master#TAB0

  http://www.Microsoft.com/hardware/Bluetooth/connectionguide3.mspx

  http://www.Microsoft.com/hardware/support/Bluetooth/en-us/default.mspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Mini Bluetooth keyboard not re-pair after installation

  I have a mini keyboard THAT compass + mouse who pairs with Windows 7 thanks to a code generated automatically by Windows. However, after that the unit is unplugged and is re - connect, Windows not self-generating code and ask you a code of the manufacturer instead. There is no manufacturer provided the code. So basically I have to remove and reinstall the device each time to make it work.

  I tried to reinstall and update the drivers on the device, but it is not available. Dongle Bluetooth has been upgraded to the latest version of the driver.

  Help!

  I found the problem. The problem is with the misleading guest of Windows 7 Professional. After you have installed the driver for the bluetooth keyboard and attempt to reconnect the said device after disconnecting, Windows 7 stipulates that you must provide a manufacturer code provided in the empty column "pair" the device. Actually, Windows is simply to ask you to wear a code and type it in the box and press enter(say 0000), and then type the same code and press enter on the bluetooth keyboard. FACT. Finish like a boss.

• Palm TX and Palm universal wireless keyboard

  I use a Palm TX with Palm UWK and the problem is that some of the keys on the right side of the keyboard do not respond.  Such as parentheses, colon and the right shift is not allowing me to type uppercase.   I deleted the keyboard drivers and reinstalled the new drivers on the Palm site, but the question remains.  The only difference is the updated Documents To Go, but the problem appeared til some time after that.  Any suggestions on what is the problem and how to solve?

  Thank you.

  Here's what I did. Sounds radical alittle, but I put the keyboard in the back of my drawer of my chest, in the case where I needed it later. I bought the Bluetooth keyboard made by Palm and works much better than the 'Wireless '.

  Message relates to: Palm TX

• Palm Bluetooth keyboard

  Hello

  I have a driver problem with the Palm Bluetooth keyboard 3245WW running the 1.1.0.8 pilot on a Centro. After about 15 minutes of use, the keyboard will start connection loss every 3 min. After that 4-5 will reconnect the simple keyboard will not work. When in an application, I can use the top and to the bottom of the keys, but the right/left keys do not work. When these questions start to happen I have to do a soft reset to get it to work again. Then after the soft rest 2 I have to reinstall the driver for the keyboard. Needless to say I went back to the keyboard Ira that has always worked. Anyone has an ideas would be great.

  -Tim-

  OK, I unloaded everything, the unit did not charge anything except the keyboard driver. The only application that I used was Notepad. I do not have the blocking or the loss of function keys, but after 15 minutes, no use, I had to redo a reconnection. And as before, after a few reconnects I had to do a soft reset.

  Message relates to: Centro (unlocked GSM)

• The keyboard and mouse bluetooth suddenly stops working

  I asked this question before using Dell, but none of the answers provided.
  The keyboard and mouse bluetooth suddenly stops working.

  Given that this only happens when I'm online I make this question to the FireFox support.
  I have the latest version of FF:

  I installed the new BIOS and Shipset, but that does not change.

  Suddenly, the keyboard and the mouse do not respond and I have to restart manually.

  R

  FredMcD said

  Keep a log of when this happens. What did you do when...

  Check the batteries.

  Hello

  Thanks for the help

  Just for information:

  I downloaded a free software called "StartupBooster" and using this to disable or remove some programs, problems with the gel (Take on wood), is gone. In addition it also speeds up boot time.

  Concerning

  R

• Should I turn off the keyboard and bluetooth mouse off?

  Hello

  I'm new to Apple products and have recently purchased an iMac with keyboard and mouse compatible bluetooth.  The are a switch on each accessory to activate the bluetooth on or off.  Should I turn off after closing down to save the battery power or not this wear simply on the switches.  Not sure if stop actually stops transmitting wireless accessories, or if the latter uses the negligible power when the computer is turned off.

  Thank you

  JosfromSydney

  JosfromSydney wrote:

  Hello

  I'm new to Apple products and have recently purchased an iMac with keyboard and mouse compatible bluetooth.  The are a switch on each accessory to activate the bluetooth on or off.  Should I turn off after closing down to save the battery power or not this wear simply on the switches.  Not sure if stop actually stops transmitting wireless accessories, or if the latter uses the negligible power when the computer is turned off.

  Thank you

  JosfromSydney

  Yes switches turn off the wireless, and yes they use negligible power when the computer is turned off.

• When I turn on my iMac, you'll see a screen with Bluetooth keyboard configuration. But I have my keyboard is plugged in and it wont let me doin more, except saying unable to connect the keyboard player

  Bluetooth keyboard put in place the display and connected mines and allow me to do anything apart from closing down

  SystemPreferences-> Bluetooth: Remove the paired keyboard, if necessary, turn off Bluetooth.