Palm Pixi touchscreen has stopped working.

Similar Questions

• HP 23-q152m: touchscreen has stopped working on my brand new HP 23-Q152m

  I've had this computer for a few days.  In the beginning, everything worked perfectly, including the touchscreen.

  But today, I realized suddenly that the touchscreen does not at all.   Nothing happens at all the

  I tried to go through the settings, but I wouldn't change a thing, and everything seems good.

  When I go to the screen 'about' on the Control Panel, it says correctly Pen and Touch - Support Windows touch complete with 10 points of contact.

  Any ideas?

  Gary, welcome to the forum.

  The first thing you should do is run HP and Windows Update to make sure that the software and drivers are all updated to the latest version.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Button ThinkPad 8 Windows has stopped working

  All of a sudden the Windows button has stopped working (no haptic feedback). The Tablet works otherwise, I can always power on it by the power button / stop. Unfortunately, the button power seems to be fragile and probably collapses when it is used on a daily basis.

  Someone has an idea if possible otherwise remedy that is rented for a month in the repair? A loose connector, or something like that? I don't think that it may be a software issue.

  Thank you.

  First Windows button has stopped working, but now, after several weeks, the touchscreen so. I got replacement touch screen cable AP HM 00, 124 of the Lenovo service replacing the cable has solved.

  I guess that's a design flaw , because the cable is longer than it supposed to be (see photo) so it becomes distorted and there caused by a variable pressure on the bottom when cover stand by the fingers on the lower part of 3 mm approximately. Fixation by band does not help, because it always "bubbles" somewhere I hope that this will happen again sooner or later these other two cables (audio connector and display) is not the issue.

  

• Acer Aspire R7: Touchscreen suddenly stopped working

  Hey everybody,

  I have an Aspire R7 (running 64-bit Windows 8). Yesterday morning my touchscreen suddenly stopped working.

  After each start, I see an error in the event log stating something like "Driver\WUDFRd could not load the driver for the device HID\VID_0483 & PID_91D1 & Col01\7 & 1b0945e0 & 0 & 0000.

  In Device Manager there is no device showing an error or something. In the category "Monitor" it is only a PnP monitor listed - shouldn't the TouchInput unit shown here? Edit: I also looked through the HID devices: the appliance with the ID hardware event log message is not there, too.

  I tried reinstalling the drivers HID-monitor using Acer Recovery Manager, but nothing else happens after showing some information like 'installation'. Also, there is no change in Device Manager.

  I also removed the "PnP Monitor' of Device Manager and began a 'search for new hardware", but that doesn't lead to the "PnP Monitor' be reinstalled.

  I also perform a factory reset, but that did not help, as well.

  I would really appreciate help from anyone. I'm at work now, so I wouldn't be able to test stuff until about 17:00 (MEST).

  Kind regards

  Jan

  I found the reason of my touch screen doesn't respond do not: if I position the screen in a very precise angle - 'almost' tablet mode - the screen reacts to the keys and of the previously disabled HID devices becomes active. I had sent in my laptop for repair after a default display - apparently in some sort the touch sensor was not back in place correctly when the screen has been replaced

  Seems that now I have to send my laptop in another repair (making three repairs for this laptop - the default mentioned display occurred after the motherboard has been replaced by the same Acer repair center)

• My pictures in Windows Media center component has stopped working

  Original title: find search indexing index reindex re-indexing research research research service troubleshooting troubleshooting

  Windows Media Center my photos component has stopped working due to a problem. I can't access my Pix through my Windows Media Center.

  Hello
   

  Were there any changes (hardware or software) to the computer before the show?

  Reinstall Windows Media Center and check.
  
  a: Open the Control Panel -> programs and features.
  b: Click Windows turn on or off features in the left pane.
  c: Expand the multimedia features, turn off Windows Media Center. Click Yes to continue, and then click OK to exit. Then restart.
  d: Open Windows features turn on or off again. Functionality in Windows Media Center. Restart the computer.
  e: Start Windows Media Center, initialize the program.
   
   
  Hope this information helps.

• Screen touch Inspiron 2350 has stopped working

  A few days ago I started my Inspiron 2350 and the touch screen does not work.

  It doesn't seem to be a clear answer as to why it stopped working or a general framework that will allow me to fix it.

  In addition, under my current computer information / drivers, the computer does not recognize a touchscreen... that laugh because the monitor is attached to the base of the computer.

  If I had to guess, based on the horrible criticism from Windows, I'm sure something is automatically updated to Windows and launched. I am currently operating on 8.1 - and since I out took it of the box three months ago. This problem started last week.

  Thanks for any help.

  p.s. the monitor driver says that it works properly and is up-to-date.

  I'm having exactly the same issues over the past months... In my opinion, to do with automatic shutter windows 8.1 update as well. I have re-installed to make the adjustment and then touch screen reworked. Then windows update automatic, touch has stopped working again. Repetitive cycles, it seems that Dell could not have intended to solve this problem at all. The last pilot patch file was last year... they never update it... I remember my first PC of Intel4 Dell, purchased at the College; She was flawed with driver problems through my 4 years in College; completely lost my parent$ 1700, ten years ago... I do not understand how my wife of Mac user to make me buy another dell again (because I told him I'm a PC person?) ... my final solution can be... support of stop 1.) calling Dell technology, these people have probably even high school, 2) switch to Mac and never re-use a PC... 3.) oh, I sell my stock Dell too... Stop wasting our lives to find a solution for this... how long did you spend YOU on this problems so far?

• my iPhoto has stopped working

  My iPhoto has stopped working. I did clean up. Now, when I click it shows cannot be opened because of a problem. The problem has not said.

  What version of OS X (or, if all goes well, Mac OS) are you running?

  What version of iPhoto do you run?

  iPhoto was not maintained or updated updated by Apple for about eighteen months.  Photos taken app supported since that time.

• Click force has stopped working

  Hi, I'm on MacBook Pro (15-inch, mid-2015, retina), freshly updated for Sierra, force click has stopped working.

  I have checked all the options, rebooted the system, still no clear sign of what is the problem.

  Does anyone have the same problem? How to check weather force/pad touch works well?

  Any suggestions what to do?

  A pointer more, I also started to use the new keyboard to work, but my memory then click force was working well.

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• 12.5.1.21 iTunes has stopped working. APPCRASH on Windows 7. WebKit.dll 7602.1050.4.5 error

  iTunes64Setup - 12.4.3.1 worked very well and no problems on Windows 7.

  After the update iTunes6464Setup - 12.5.1.21 or iTunes64Setup - 12.5.1.21, APPCRASH arrived.

  Get 2 x "iTunes has stopped working" and the messages to "Close the program" when you try to view the store / App Store or view account.

  Possible only "close program"...

  Tried to uninstall ALL Apple software (with deletion of all files) and reinstall again but still the same error!

  All software average iTunes to Apple, Apple Software Update, Apple Mobile Device Support, iCloud, Hello, Apple Application Support (32-bit and 64-bit).

  Checked the event viewer:

  1. error message:

  Name of the failing application: iTunes.exe, version: 12.5.1.21, time stamp: 0x57cfb09f

  Name of the failed module: WebKit.dll, version: 7602.1050.4.5, time stamp: 0x57c11f7f

  Exception code: 0xc0000005

  Offset: 0x004f0e09

  ID of the process failing: 0xcc4

  Start time of application vulnerabilities: 0x01d218b3194e2f01

  The failing application path: C:\Program Files\iTunes\iTunes.exe

  Path of the failing module: C:\Program Files (x 86) \Common Files\Apple\Apple Application Support\WebKit.dll

  Report ID: 68f80588-84a6-11e6-8df8-4851b741621f

  2. Windows Error Reporting

  Fault of type 1024926102, bucket 25

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: iTunes.exe

  P2: 12.5.1.21

  P3: 57cfb09f

  P4: WebKit.dll

  P5: 7602.1050.4.5

  P6: 57c11f7f

  P7: c0000005

  P8: 004f0e09

  P9:

  P10:

  Hello, follow the instructions If you see 7 error (error Windows 193) when you try to install iTunes for Windows - Apple Support

• iMovie has stopped working since iOS 10

  iMovie has stopped working since iOS 10

  Now, all I see is a black screen and then it throws me out of the app however does not close the app and the problem does not improve. I lost my summer and extra time making a super great way to 5 hours difficulty megaforce and now I can't watch it

  Hello iMovie does not work,

  After reviewing your post, it looks like the iMovie app is black and take you to the home on its own screen.
  I recommend you read these articles, there are a few things that we can try to get the application running again.

  Force an application to close on your iPhone, iPad or iPod touch - Apple Support
  Restart your iPhone, iPad or iPod touch - Apple Support

  If an application you have installed unexpectedly closes, unresponsive, or will not open - Apple Support

  Thank you for using communities of Apple Support. Good day.

• Error "iTunes has stopped working".

  After update itunes to the latest version of 12.5.1.21, its does not and always give an error like "iTunes has stopped working". Even I tried to reinstall the same version and earlier versions of it. Always the same question.

  Kindly resolve.

  Bene-

  

  Hello, this article could help you Fix unexpectedly closes or launch issues in iTunes for Windows - Apple Support

• "Share" feature in the Finder (or other applications) has stopped working.

  Use OS X El Capitan on a Mac Book Pro, the function in the Finder (or other applications) has stopped working "share."  From the Finder, I select a file and to 'Share', select say "Mail", nothing happens. Even when selecting other sharing options such as 'Notes', etc.  He used to work.  Now it is not.  In system preferences > Extensions all the sharing options are regularly controlled.  The same problem occurs in other applications such as Photos.  Selection of a photo and trying to "share."  Nothing happens, the application crashes. Does anyone have a solution?

  The Share button shows 'No. Service' or missing menu items?

  https://support.Apple.com/en-us/HT203129

  If this does not help, backup the computer and reinstall OS X El Capitan of OS X Recovery.

  https://support.Apple.com/en-us/HT204904

• How to make the new version, I just installed as the old work that has stopped working?

  I used Thunderbird for many years and have always been very satisfied.

  A few days earlier, he has stopped working on my computer. I think that this was due to an update of AVG Free 2015. (When I restarted after the automatic update, Tbird and Chrome and Firefox broke everything. AVG has since been removed and replaced with Avast. Chrome and Firefox, both work very well after I installed the latest versions.) I took the opportunity to get the latest version of Tbird (I was 37) and installed it. TBird is OK, but the operation is a total disaster!

  He used to see me just like the user. Now I have to choose my Inbox by clicking, and then open it in a new tab. I could accept this pain if things worked OK. The first email that I click appears in the message pane. But I can't delete it unless I double click to open in a new tab! I can not get the following message to be displayed in the messages pane. It's used to work if I simply clicked on the message.

  How can I make Tbird work as he did? I used to love, now I hate it! Please help me before I dump Tbird and switch to Gmail!

  Thanks for any help.

      -jim
  

  And it still works like that for me.

  First define your default account
  Account settings, mark your account, thoroughly open stock account and 'set as default '.

  To see how it works

• "Plugin - container.exe has stopped working" error during installation of Firefox 36.0 via SCCM if Firefox is open during installation.

  When installing Firefox 36.0 via SCCM (System Center Configuration Manager), if the previously installed version of Firefox is open during the new installation, an error, "Plugin - container.exe has stopped working. A problem caused the blocking of the program works correctly. Please close the program. This problem occurs only if Firefox is open during the installation, otherwise the installation is successful. Note: I have included a taskkill to 'firefox.exe' in my installation script to stop Firefox runs.

  There are new logic in Firefox 36 monitor to stop crashes while the Mozilla Crash Reporter can capture data. This could have the effect of killing her task, I'm not sure. Maybe you have to kill plugin - container.exe before firefox.exe? I'm not familiar with SCCM and it might have a more graceful way to close an application.

• FDM has stopped working with firefox

  Free Download Manager has stopped working with firefox after I speedup firefox opening. (not after restart or update of firefox) Before that, I used FDM on firefox. I already try with restart firefox and follow-up of the implementation under the quiz "Windows Media or other plugins stopped working after Firefox update | Firefox Help", but none of them worked.

  When you say after you speed up Firefox, do you mean you used the reset feature? You can tell because Firefox will create a new 'Old Firefox Data' folder on your desktop when you reset.

  The Reset function deletes your extensions as part of the cleaning process. You probably need to reinstall FDM from its original source. Maybe the Addons site? https://addons.Mozilla.org/Firefox/