PaperMaster 98 does not work on Windows 7 but have worked on earlier operating systems.

Similar Questions

• Problem AnyDVD update 'AnyDVD does not work on your operating system'

  For many years, I used a system called 'AnyDVD '. Today I received a memo to update to the latest version I've done dozens of times in the past.
  This time, however, I have download the new item and click on "run" the file, I get a pop-up window indicating. "AnyDVD does not work on your operating system. .....
  I'm no computer expert so I don't have any idea what to do... I tried a system restore to a few days, but that did not help.
  In the meantime, the previous version of AnyDVD still works as always. How can the old system works but now an update does not work on my operating system. That makes no sense.

  Thanks for the comments... But does not apply to this problem. AnyDVD has free updates. Problem was somewhere in the system and can be corrected within 24 hours and was able to update with no further incident. Still a mystery, but is no longer a problem.

• Satellite P100-324 - GPU overheating due to fan does not work in the operating system

  Hello world.

  While trying to solve the problem of RAM of 4 GB ([this thread | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=28374&tstart=0]), I meet another weird thing - gpu overheating due to fan does not work in the operating system.

  Now, I restored the XP MCE using the Toshiba Recovery and I was VERY surprised to see that the problem still exists! As soon as loading the system GPU fan stops, and there is only tranquility. The application load is heavy on GPU and reaching 104 results by reducing its GPU and MEMORY clock values and NOT in the activation of the fan.

  The same thing happens in 64-bit gentoo. ACPI can be turned on or off, it is not serious, the GPU fan always dies as soon as the system load. In non-OS environments (bios, program of recovery, etc.) the fan works fine, GPU cooling from time to time.

  This problem occurs in versions of BIOS: 2.40, 4.00, 4.20.

  Any help would be greatly appreciated, since this laptop is my main working tool and I can't let go 14 days (service).

  I saw in your other thread that you have updated the BIOS and you have installed several different OS.

  Fact is that the BIOS v 4.2 package contains BIOS 32-bit and 64-bit OS.
  Your laptop has been preloaded with Win XP MCE 32 bit. Please use the 32-bit BIOS if the original XP MCE running on the laptop.

  Best regards

• Satellite P105-S6217 - 5-in-1 SD card reader does not work after upgrading operating system

  OK, here's my situation:
  I installed my OS Satellite P105-S6217 from Vista Home premium 32 bit to Vista Ultimate 32-bit. I made sure to reinstall all my drivers. I jumped into an SD (2 gigabytes) and nothing happens.
  I checked my host adapters Manager/SD device and it says that the device is functioning properly. I noted, however, that, under the tab other devices, something seems wrong with the mass storage controller.

  I checked the status of the device and it say the drivers for this device are not installed. I swear I have install all drivers. I'm naïve about what to do next. Can someone advise me?

  Do you have the yellow marks in Device Manager?

  I searched Toshiba driver download page and there is the Toshiba memory Flash utility. In this package are the drivers for the SD card and the utility to format the SD card.
  If you install this.
  http://www.CSD.Toshiba.com-online download-online portable => Satellite-online P105-S6217

  After installation, try to format the SD card with the utilities. After that, it should work.

  Maybe the SD card not work properly, then try another SD card.

• PSE 8 does not work after upgrading operating system

  I used PSE 8 for a while on Windows XP. I recently "upgraded" to Windows 7 and re-installed PSE 8. After some difficulty in finding my catalog, I had the Organizer to work. However, when I try to pass to the linker, I get a message that says "License for this product has stopped working" also tells me to restart the computer (which has no effect) and displaying the error code 150:30. I contacted Adobe support, and they were useless. I just installed this product on my desktop computer. I considered PSE 19 "redevelopment", but after reading some of the reviews, I don't really want to do. PES 10 apparently has a lot of advertising that cannot be disabled. Anyone know how I can get my 8 version to run? I'm not very happy with Adobe support or visit their web site, and if I can't get this race, I think I'll get other editors to photos. Anyone have any suggestions for an alternative to the PSE?

  See this document from Adobe:

  http://kb2.Adobe.com/CPS/405/kb405970.html?promoid=FCSBS

  Ken

• How can I re - download version 3.6 or newer that works on Mac OS 10.4.11. I've replaced Firefox I had (by invitation of Firefox) with 4.0 which apparently does not work on my operating system.

  I think I was already running 3.6, I could find a dmg to 3.0.9 and install it, but I want to upgrade to the latest version which runs on my OS 10.4.11. Cannot find this option on the Web site. Thank you!

  You can get Firefox 3.6.16 here:
  
  http://www.Mozilla.com/en-us/Firefox/all-older.html

• I tried to install cs3 on windows 10 shadow run on my mac book pro.  Technical support told me that it does not run on windows 10 but doesn't give me an opinion on whether she would go if I was running windows 7 to the people's Summit.

  I tried to install cs3 on windows 10 shadow run on my mac book pro.  Technical support told me that it does not run on windows 10 but doesn't give me an opinion on whether she would go if I was running windows 7 to the people's Summit.  Any thoughts?

  First of all, that the software is old enough so that it does not at all with Windows 10... but

  An idea that MAY work to install or run some programs in Windows old 10

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  First, that the software is old enough for that it may ALSO not work with Windows 7... but

  For Windows 7 you right click on the program and select a compatibility option in the pop-up window

• Message "this application will not work in this operating system" at the start.

  Original title: this application will not work in this operating system

  After starting, I get this error message:

  Stop: this application will not work in this operating system

  What application is this? How can I fix? I am running XP SP3

  CZFMDXPK c:\program files\fdd + fever disease combo reader\czfmdxpk.exe a the culpit. The problem is resolved and no Malware found. eventvwr helped me identify other problems, and now I'm curious on how to disable the stubborn programs in msconfig. I'll get.

  You did a great job and thank you very much. Have a beautiful weekend. Rainer

• Y700 - Dolby Audio does not work after resetting the system

  After resetting my computer to factory settings, audio dolby does not work. This is the error message I get:

  "Your installation is missing components. Reinstall the audio driver or the stand-alone components available on the support site for the manufacturer of your PC. »

  His works on my computer, just not this request.

  Thanks for the help.

  Matt

  I have the same problem, I have a 70-Z40 and the Dolby Digital Plus open, but does not work, you can choose the profile but is not even, I have this problem after the last windows 10 updated a few days ago.

  I hope you can help, thanks in advance

  EDIT: I solved it after a few tries, I don't know if it is the best way, but it's how I solve this problem:

  (1) Delete last windows update (after that, it did not)

  (2) delete the sound driver from Device Manager and reboot (it did not)

  (3) download the driver for my lenovo model page and install it (it did not)

  (4) any uninstall Conexant audio and Dolby of my computer and re - install again (it does not), it seems that my dolby 7.6.4.9 driver version is not correct, I need the 7.5.1.1

  (5) again to uninstall everything and restart

  -From there, he solved my problem

  (6) go on my computer (my system is in Spanish, so I don't know the correct name for the version in English, sorry) and then go to the Lenovo partition, then open drivers > Audio > Setup.exe This will install your Conexant audio driver, and then restart.

  (7) after you restart your laptor, do the same thing... Lenovo > drivers > Audio > DolbyGUI > x 64 > DolbyDigitalPlusHT.msi, and then restart your computer and it should work fine.

  Sorry for my English.

  See you soon

• The sound does not work on my XP system

  Hi the sound does not work on my Windows XP Pro system, while they were inspecting it stipulates that at least one of the following services does not work, Windows Audio and Windows Audio Endpoint Builder. How can I solve this problem?
  Thank you

  Hi GeraldSaurin,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  I suggest you to start the following services and check that it works.

  a. click on Start menu and enter service.msc and press enter.

  b. in the next window you will see the list of services.

  (c) in the list, locate the service and try to Start the services.

  Also run the fixit available in the link below and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  I hope this information helps!

• Internet and the sound does not work after uninstalling programs, System Restore also not work.

  I noticed that my computer felt a bit slow so I uninstalled a few programs that I knew were not very helpful so I restarted my laptop, and then the network and the sound does not work.

  I tried to use the system restore, but that does not work either and I tried to online solutions, but nothing works.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Clone Stamp does not work during the operation of frequency separation.

  Spacing of the frequencies for the first time by train.  I finished the layer of tone and now works on the texture, but the clone stamp does not work.  I have the linear light value layer and the stamp tool is set to 'active layer '.  The stamp tool is gray in the Middle, as if I were seeing a "high pass sharpening" layer through the center of it.  Tried to save the doc and the reopening, but none here.  Any other ideas?

  -Jeff

  In fact, I restarted Photoshop and it works properly now.  Thanks for the information on how to best to post a question.  I'll remember that next time!

• Windows Update does not work after restoring the system

  HP Compaq 6000 Pro, bought in early 2011. Windows 7 32 bit. I recently did a factory restore to return to a clean system using factory restore partition. The restoration seems complete ok, and I have a Windows 7 clean and functional configuration.

  However, the Update window will not work (and of course, it is now quite an old installation of Windows 7) it comes up with the Red Cross and the message "Windows Update cannot currently check for updates because the service is not running." Other notable issues that may or may not be related are: Windows Defender won't start not (0 x 80070564). HP Support Assistant reports it needs to update, but the update fails (because then it just says: it should be updated again)

  What I've tried so far:

  Verified that the BITS and the WU services are both actually run

  Uninstalled the McAfee antivirus software

  Tried to install Windows 7 SP1 directly (happens with "catastrophic failure")

  Tried Windows Update (wusa.exe) stand-alone installation / WU Readiness tool-fail (Oxc8000247)

  MS difficulty he said Troubleshooter it corrects problems, but nothing changes later

  (In short, tried all suggestions from MS support)

  It drives me crazy - any help will be appreciated!

  ISO should work, just be sure to download the version of Pro 32-bit.

• WiFi does not work after reinstalling the system

  I have Pavilion dv6t - 6 c 00. I had to reinstall Windows 7 due to a virus. After installing all the drivers available from hp.com for my model, everything finally works but Wifi still does not (network controller shows lack driver even after I tried like 8 different). Here are the technical details:

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
  PCI\VEN_10EC & DEV_8176 & CC_028000
  PCI\VEN_10EC & DEV_8176 & CC_0280

  Appreciate any help. Thank you!

  Hello:

  Download and install this driver.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Specific wireless network does not connect in Windows 7, but does in Windows 10?

  I have a Toshiba Satellite L750D laptop, it is about 3 years old now.

  I use Windows 7 for a while. Everything works fine to connect wireless at home and more than other wireless networks, but the hours was spent without success to get it to connect to the wireless work (Ministry of education, that's why this included fiddling around with the proxy settings and user authentication options). I got it to connect properly this wireless in the past, but to another school.

  I had given up on actually being able to use internet in my class to improve the education of students.

  I upgraded my computer to Windows 10, then suddenly, following the same steps that we had tried before, my laptop had no connection to detnsw disorders. Hooray, 21st century learning!

  Unfortunately, some of the hardware in my computer graphics or something couldn't handle Windows 10 (or I couldn't manage Windows 10 and what he did to my outdated laptop), so I had to use the restore function, which came back my computer to Windows 7 without having to format my computer and re - install Windows 7 from an external source.

  Now she continues to refuse to connect, even advise that to contact the network administrator.

  It's driving me crazy. What is different between the 2 operating systems that allows to connect without fuss one way and deny the other way?

  I have triple checked everything I could think of that could prevent the connection, including the drivers and my antivirus, nothing helps.

  Is this just a case of Resistentialism that cause me to seriously consider spending the money that I have not currently on a new laptop just so I can show the occasional Youtube educational video?

  Has anyone else had a similar problem, or is it just me?

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  The problem may occur if the network drivers are not correctly updated or you need to change the network settings.

  Method 1: Please follow the steps described in the article Microsoft help to the given address:

  Using the troubleshooter from network in Windows 7

  How can I troubleshoot network card?

  Method 2:

  I suggest that you change options for both the systems on the network in the Advanced sharing settings (Open Network & Sharing Center > Advanced sharing settings to change):

  -Enable network discovery

  -Turn on the file and printer sharing

  -Turn on sharing so anyone with network access can read and write files in public folders

  -Turn off password protected sharing

  Now, try to map the drive, follow these steps:

  1. click on Start, click on computer and click map network drive in the options under the address bar.

  2. in the drive box, click the drive letter to use.

  3. in the folder box, type \\server\share, where you can type the IP address of the drive to be mapped. For example, if the IP address is 192.168.6.xxx, you type \\192.168.6.xxx.

  4. click on Finish.

  Let us know if you need more assistance. We will be happy to help you.

  ___________________

  Thank you best regards &,.

  Isha Soni

• Data hold does not work after changing time system

  Hi guys,.

  I configured Oracle Data Guard successfully between a primary database and a database physical standby.

  Later, I changed the date and time in the two servers at the level of the BONE (from 14 - Sep to the 13 sept). The time is the same on both servers, but it has been changed. Then, I created a test table in the primary database, but I see not in the database of relief, well that configuration sounds good.

  Could you please explain?

  It is 11.2.0.1.0 - 64 bit Linux.

  Here is the code:

  In the primary:

  SQL > select sysdate to double;

  SYSDATE

  ---------

  13-SEVEN.-15

  SQL > desc hr.test

  Name                                      Null?    Type

  ----------------------------------------- -------- ----------------------------

  A                                                  NUMBER

  B                                                  VARCHAR2(10)

  In the database backup:

  SELECT SEQUENCE #, APPLIED, FIRST_TIME NEXT_TIME

  FROM V$ ARCHIVED_LOG BY SEQUENCE #.

  SQL > 2

  SEQUENCE # FIRST_TIM NEXT_TIME APPLIED

  ---------- --------- --------- ---------

  232 06-06-SEPT.-15-15-SEP YES

  233 06-06-SEPT.-15-15-SEP YES

  ..

  ..

  261 14-14-SEPT.-15-15-SEP YES

  262 14-14-SEPT.-15-15-SEP YES <-here it shows the old date

  31 selected lines.

  SQL > desc hr.test

  ERROR:

  ORA-04043: hr.test of the object does not exist

  In the primary db:

  SQL > alter system switch logfile;

  Modified system.

  
  

  Pending:

  SQL > SELECT SEQUENCE #, APPLIED, FIRST_TIME NEXT_TIME

  FROM V$ ARCHIVED_LOG BY SEQUENCE #.  2

  SEQUENCE # FIRST_TIM NEXT_TIME APPLIED

  ---------- --------- --------- ---------

  263 13-14-SEPT.-15-15-SEP YES

  264 13-13-SEPT.-15-15-SEP YES <-new date shows fine here

  265 13-13-SEPT.-15-15-SEP YES

  266 IN-MEMORY, 13 SEPT. 13. - 15-SEPT-15

  35 selected lines.

  
  

  SQL > desc hr.test

  ERROR:

  ORA-04043: hr.test of the object does not exist

  Hello

  You can check availability using v$ view dataguard_status.

  You can make a request on a user table at the backup site if the standby instance is in recovery mode.

  to check your test table, you must stop the recovery mode and start in read-only mode

  Cancel log apply services:

  SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;

  Open the database for read-only access:

  SQL > ALTER DATABASE OPEN READ-ONLY.

  Then you can query your table test.

  Concerning