Specific wireless network does not connect in Windows 7, but does in Windows 10?

I have a Toshiba Satellite L750D laptop, it is about 3 years old now.

I use Windows 7 for a while. Everything works fine to connect wireless at home and more than other wireless networks, but the hours was spent without success to get it to connect to the wireless work (Ministry of education, that's why this included fiddling around with the proxy settings and user authentication options). I got it to connect properly this wireless in the past, but to another school.

I had given up on actually being able to use internet in my class to improve the education of students.

I upgraded my computer to Windows 10, then suddenly, following the same steps that we had tried before, my laptop had no connection to detnsw disorders. Hooray, 21st century learning!

Unfortunately, some of the hardware in my computer graphics or something couldn't handle Windows 10 (or I couldn't manage Windows 10 and what he did to my outdated laptop), so I had to use the restore function, which came back my computer to Windows 7 without having to format my computer and re - install Windows 7 from an external source.

Now she continues to refuse to connect, even advise that to contact the network administrator.

It's driving me crazy. What is different between the 2 operating systems that allows to connect without fuss one way and deny the other way?

I have triple checked everything I could think of that could prevent the connection, including the drivers and my antivirus, nothing helps.

Is this just a case of Resistentialism that cause me to seriously consider spending the money that I have not currently on a new laptop just so I can show the occasional Youtube educational video?

Has anyone else had a similar problem, or is it just me?

Hello

Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

The problem may occur if the network drivers are not correctly updated or you need to change the network settings.

Method 1: Please follow the steps described in the article Microsoft help to the given address:

Using the troubleshooter from network in Windows 7

How can I troubleshoot network card?

Method 2:

I suggest that you change options for both the systems on the network in the Advanced sharing settings (Open Network & Sharing Center > Advanced sharing settings to change):

-Enable network discovery

-Turn on the file and printer sharing

-Turn on sharing so anyone with network access can read and write files in public folders

-Turn off password protected sharing

Now, try to map the drive, follow these steps:

1. click on Start, click on computer and click map network drive in the options under the address bar.

2. in the drive box, click the drive letter to use.

3. in the folder box, type \\server\share, where you can type the IP address of the drive to be mapped. For example, if the IP address is 192.168.6.xxx, you type \\192.168.6.xxx.

4. click on Finish.

Let us know if you need more assistance. We will be happy to help you.

___________________

Thank you best regards &,.

Isha Soni

Tags: Windows

Similar Questions

  • HP Photosmart C309a - but wireless network can not connect

    I have a new printer C309a, but it does not connect to my wireless network.  I have read all the posts and tried everything I can think of (I'm not expert network but reasonably competent), but nothing helped.

    I use a router NetGear DG834N which works very well provide a wireless network for an iMac, 2 iPhone and an iPad. There is also a PC running that Vista wired to the router.

    When I try to connect the printer to the wireless network, it finds the network OK but when I put the password it fails to connect.  Test report says wireless MAC address filtering can be enabled.  But... MAC filtering is disabled on the router.  Wireless isolation is disabled on the router.

    Tried to get this happening for a few weeks now.  I want to emphasize that I managed to print a test page the first time it has been installed (so there was a wireless connection then).  And I got a wireless connection briefly a few days.

    Quite perplexed and not a little frustrated.  Can anyone help please?

    I think it's a question of wireless mode.  Try the other settings from the drop-down menu where it says 270 Mbit/s.

  • I am connected to a wireless network. I connect to the Internet, but not for the world wide web. How doe to fix? the message I get is cannot find server

    I have and you are using a router D-Link 601. I connect with a desktop computer and 1 another laptop. The laptop which does not connect on the web is an older Compact. I always use Internet Explorer 6.0.2900.xpsp_sp3.101209 - 16471C. Previously, I had dial-up and no problelms.

    Hello

    This helps remove all connection settings information that computers in Internet Explorer?

    Kind regards

    Hans

  • Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

    Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

    I just installed a Belkin modem-router - which went well. Can I connect WiFi gadgets etc. I can also connect to the internet via a network cable to my pc. I also installed a belkin usb wireless adapter and in Device Manager, says it is enabled and works.

    My problem is, I have no way of choice get a WiFi PC to display in the list (from the notification area) and cannot get the pc to give me options to create a wi - fi connection. The more I get to try to do that is "unexpected error"!

    If someone could help on this - I would be very grateful

    Good news - update of my ongoing saga with this Belkin modem/router.

    Got the pc to see wi - fi now. It turned out to be the Zone Alarm! As the router has a firewall, I uninstalled Zone Alarm completely. Also, I went into the properties of belkin usb and checked it was the most recent drivers, it does not so I installed them.

    So far so good

    Thanks for the help

    TREV Smith

  • DLink Wireless Router is not connected - indicates "unidentified network".

    original title: DLink Wireless Router is not connect when tried for the second time for the initial Setup on Windows Vista Home Basic SP-3

    DLink wireless router is not connect to my laptop. I don't use wireless sound, but the connection to laptop via cable ethernet for the initial Setup, the first time it connected and I did not any changes, because I couldn't time to set this up, so, I turned off on that day and triend to finish installing the next day to my surprise I see this router is identified as 'Unrecognized network' and when I used the CD that came with the router and he says no router not connected. I did something wrong here or its how Windows Vista Home Basic Edition will identify, can you please help me solve this problem.

    Hello

    Perform the steps from the link below and see if it helps.

    Windows wireless and wired network connection problems 

    Hope this information helps.

  • New wireless network does not appear on any computer

    Thanks in advance for any help. OK, so I have a HP office connected to the internet through a router WRT54GS.  I had 2 laptops connected to the NICU my wireless router. A (HP) laptop has built in wireless modem/adapter.  The other laptop Dell was NICU equipped with a wireless adapter card.  The problem is that the adapter on the basically dead Dell laptop, I don't give no internet connection.  So I tried to install a more recent network card wireless linksys with speed on the cell phone booster.  The instructions asked me to press the orange button on my router Cisco access point.  I knew thatd be a problem.  While the laptop connected to the internet, my old wireless network seems to be deleted.  Installin the new card on the Dell laptop has created a connection b/t it and the router. The other laptop (HP) is now offline and not even a slate of the new network.  So I tried to create a new wireless network on the main desktop computer.   Now this new network is not detected by the wireless or portable printer.  Other networks is detected if.  Or the original linksys network is detected, Im not sure.

    OK sorry for any confusion, but my basic problem is that my new wireless network is not detected on the laptop or the printer. I tried unpluggin the router. I also tried to manually in the network settings.  I also tried to disable the firewall on my main computer. Nuthing worked. I checked the Device Manager, everything seems fine.

    My router is just old? Its at least 4 years

    I don't know what to do. Thanks again for your suggestions.

    NVM, I got the impression to work. just installed it on the laptop wireless.  I still can't get the 2nd adapter linksys to laptops to work. I'll ask for help in this section of the adapter.

  • My camera SonyDSC-S85 will not connect to windows 7 said no driver available, why go to this if it does not support my equipment

    My Sony DSC - S85 will not connect to windows 7. He said no driver is available I can't believe what is happening simply because do upgrades of windows I yo buy all new appliances and video equipment.

    You're right - the site of Sony says that your camera is not supported under Windows 32 or 64-Bit 7. However there is a simple solution - take the memory stick in and out of the camera and a card reader allows you to transfer your photos to your PC.

    If your PC does not have a card reader, you can buy USB very cheap ones. Just make sure it's one that can read the memory stick into your camera.

  • Problem of PSG - Samsung Galaxy phone does not connect on windows 7 pc

    Problem of PSG - Samsung Galaxy phone does not connect on windows 7 pc

    I have two identical, the Samsung Galaxy phones, it connects to the pc to transfer files either does not connect despite the many possible corrections, I've read online by train.

    The phone tries to connect but is a problem of the PSG, while it is plugged said to install the driver, then momentarily, it says ready to use and then goes back to install driver again, it done a few times and then says failed.

    I tried to reset the phone to factory settings, reinstall the driver etc etc but nothing I tried works.

    I've read other posts of similar questions and have created a mtltrace.etl file, but I don't know where or how to download for investigation.

    Any help appreciated

    Hello Rob,

    Thank you for the update on the issue.

    I suggest you to uninstall all the drivers, that is Samsung as well as Bluetooth.

    Then, restart the computer and plug all phones Samsung three each so install the drivers and software from Samsung kies from the link below:

    http://www.Samsung.com/UK/support/model/gt-S6810PWNBTU

    After installing everything that the Samsung and then restart the computer and then plug the adapter Bluetooth (driver installation) and check if the problem persists.

    Thank you.

  • Wireless network does not work in hp mini 210-2013ee

    Hello

    My laptop can not find any wireless network, or even connect to the cable network.

    Model: HP Mini 210-2013ee
    Product number: XK405EA #ABV

    Note: I formatted and installed all the software drivers, everything works fine but the network!

    Sorry for my bad English, thank you very much.

    Hello:

    These are the two reasons you have no networking capability because they are your Wi-wired adapters and who needs drivers.

    Here they are...

    Wireless:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

    Wired:

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-93502-1&CC=US&DLC=en&LC=en&os=4062&Product=4326160&sw_lang=

    Paul

  • Wireless network adapter cannot connect to the wireless network

    When I start my PC HP TouchSmart it does not recognize my wireless network.  It says wireless network adapter cannot connect to the wireless network and the details said network adapter "Local network connection * 16 ' does not work properly. The strange thing is that if I leave my computer for a few minutes, then restart it twice, it recognizes the network and starts working. Frustrating is that I have to do this everytime I turn on my computer.  It takes at least 10 minutes of starting and restarting my computer before it will recognize my wireless network.   Any help?

    Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

    Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

    Troubleshoot network adapter problems to Microsoft link above.

    Try without commitment TCP/IPv6:

    If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

    http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

    See you soon.

    Mick Murphy - Microsoft partner

  • Wireless networks are not displayed!

    Just replace a hard drive in a friends address. I did a clean install of W7 and did all the updates via a wired connection.
    My wireless network does not, any more than all the networks around me I see on my personal laptop.
    No conflicts in Device Manager. Device is not working properly.
    I can enter my network name and key to manually authenticate and connect, but it's not good to travel and use in public places.
    I was not able to find a solution anywhere.

    Any suggestions?

    Found the answer on ask.com
    Had to open cmd and run commands...
    Empty and reset some things, restarted and seems to work now.

  • IPhone will not connect to Windows

    Hello world

    I'm sure it's an old problem, but my iphone 4S does not connect to windows. When connected, it makes the sound of the connection and the accusations but itunes and windows explore does not see the phone. Same 3rd apps from third parties like copy Trans cannot see the iphone too.

    My ipod classic always connects.

    Have you ever tried the troubleshooting steps mentioned in this article?

    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  • SK2061: The wireless keyboard will not connect when the PC is turned on.

    My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

    The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

    Hello @JimCar82,

    I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

    Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

    Please re-post with the results of your troubleshooting, and I look forward to your response!

    Concerning

  • I can not connect to windows.

    I can not connect to windows. I get the message "Windows user profile Service Service failed to load the connection user profile failed" any solution?

    You have another admin account , you can connect?
    If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

    If you don't have another admin account, go into safe mode.
    Here's how to get safe mode:
    Shut down your computer > turn it back on and immediately and repeatedly press F8 key until you see a black and white screen. The top/down arrow and select Safe Mode with network.

    In the window of logon in safe mode...
    1.
    You can log in to your own account administrator in safe mode?
    If so, do a restore system first, if no help, run the Microsoft tutorial support listed below.

    2. If you cannot connect to your own account, you see another
    next to your admin account in the logon screen?
    If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new to do a system restore first, if no help, run
    the Microsoft tutorial support listed below.

    If you are able to log on in safe mode, do a system restore. Choose a
    Date of when you were able to log in NORMAL MODE as your restore point.
    How to restore the system:

    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    Microsoft technical support
    tutorial     :
    http://support.Microsoft.com/kb/947215
    There are several methods, go through one by one.
    Method 3 has a "fix it for me" application

  • Satellite A60-332: a wireless network or not?

    I usually know if the model toshiba satellite sa60-332 the wireless network or not

    Hello

    Unfortunately, the wireless LAN card is not available on this device. You can use a PCMCIA wireless card or a WLan USB to use wireless technology.

Maybe you are looking for