Partition not Shrink not correct?

Im running windows seven and trying to shrink my main partition to dual boot ubuntu, however despite having 600 GB free on the retractable drive told me I only had 8 GB of shrinkable space, im a tibabyte player and went so far as to clean all my files not needed just so I could install ubuntu, and all that I'll be back is 8 gb after the removal of more than two HUNDRED gigabytes of space I've defragged, I did a disk cleanup, all to nothing does not

Download free Easeus Partition Master http://www.easeus.com and try it.  It works usually better than the provided Windows utility.

Good luck.

Tags: Windows

Similar Questions

  • Acer Aspire E5 - 551g do not correctly restart

    Hello

    I have a laptop Acer Aspire G 551 - E5 - t0jn which was not correctly restart after upgrade to Windows 10.

    The laptop starts if I press and hold the powerkey until it passes to the wide, or make a SHUT DOWN instead. However, when I just do a restart it just hangs at the Acer logo indefinitely. I did a clean install of windows 10 and the problem persisted. I then installed a linux beside windows 10 distribution and the problem persists there too, so I'm not sure it's just windows 10. However, until the upgrade, 8.1 and my time given linux partition on very well without hassle.

    Any advice on this would be greatly appreciated

    Thank you

    The problem was the Ultimate - n 6300 Wireless Nic Intel I asked to replace the buggy Atheros, since swapping back everything works as should be. I never suspected the wireless network card could be the problem, but it turns out that this particular card and E5 mobile computers Acer 551G could not agree and resulted in the laptop hung downtown after the reboot.

  • I want my system to use MBR partitions not GPT. How?

    I have a new laptop Alienware M18x R2 with Windows 8 Pro.  My drive configuration is as follows:

    1 x disc 1 TB of OS HARD drive.  Set up as GPT.

    data disk HARD 1 x 1 TB drive.  set up as GPT.

    mSATA 1 64GB SSD x used as a getting started disc caching for OS disk.

    My problem is that I use a very old ghost bootable CD BACK to start from create backup of my OS drive images.

    I used this cd ghost from windows 98 up to windows 8 on my current desktop system, and it has ALWAYS worked perfectly. With my new laptop, it seems it is not compatible with GPT and does not correctly write to a GPT partition.

    I accepted my fate that I will lose everything on both changing from GPT to MBR disks. I know how to change the second disc, but I don't know how to change the disk to the operating system.

    Before doing something drastic, could someone tell me the following:

    My computer laptop alienware with windows 8 must have GPT partitioned disks or MBR is okay?

    I have a maximum of 2 partitions per disk, why GPT and MBR not?

    How totally clean the 1 TB OS drive?

    Where is initially set GPT partitioning for example BIOS or windows?

    How to stop a clean reinstall of windows 8 from GPT partitioning again?

    Thank you

    In order to change the GPT on the MBR, you must delete all partitions on the drive and do a fresh install of the operating system.  This will involve a lot of time and effort.  Why don't spend it all $30 or so away a copy of 2013, Acronis, who CAN handle the imaging GPT disks?

  • The requirements for the universal Clipboard not correct?

    Hello

    The requirements for the universal Clipboard for iMac is not correct. It should work on my iMac mid 2011, but it doesn't. It works on my Macbook Air mid-2013, so I know it works in general.

    You do not discuss Apple in these forums, we are all users like you.

    If you have any questions please ask, however if you have any comments for Apple please leave at www.apple.com/feedback.

  • with firefox 43 yahoo and yahoo mail doesn't work does not correctly

    With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

    I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

    Thanks for the help!

  • 10 charts of Thunderbird Windows are not correctly RESOLVED caused by hardware acceleration

    All my Thunderbird 38.0.1 graphics do not correctly display in Windows 10 (10130)

    I found the answer. I had to disable hardware acceleration.

    Options > advanced
    Use hardware acceleration when available.

  • Thunderbird does not accept the user name and password, an error that the user name and password are not correct

    Thunderbird esteem username and password are not correct,

    Gmail account?

  • My site is not correctly appear in the Firefox browser. Can you help me?

    My site is not correctly appear in the Firefox browser. Can you help me?

    My Web site: http://hayro.la

    You can have zoomed pages by accident.
    Reset the zoom of page on pages that are causing problems.

    • View > Zoom > reset (Ctrl / command + 0 (zero))

    You can try the following steps in case of problems with web pages:

    You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

    • Hold down the SHIFT key and click the Reload button
    • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
    • Press 'Command + shift + R' (Mac)

    Clear the cache and delete cookies only from Web sites that cause problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe
  • Pages of Firefox won't load does not correctly. User name and other action buttons do not respond when clicked. I tried the Java toolkit release, but who doesn't.

    Some sites such as Netvibes and other sites containing columns all of a sudden not correctly displayed. Registration or login buttons do not respond.

    The plugins are up to date.

    You can try the following steps in case of problems with web pages:

    Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

    • Hold down the SHIFT key and click the Reload button
    • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
    • Press 'Command + shift + R' (Mac)

    Clear the cache and cookies only from Web sites that are causing problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the startup window Mode without failure.
  • disc eject does not correctly persist

    I get several error messages that my external hard drive was not ejected correctly. I ejected it, turned off, unplugged and then reverse the process. Whenever my screen locks when I open it there are several messages not eject disks does not correctly.

    Restart your Mac, and then drag the disc on the desktop for the external drive to the trash.

  • List of the albums of songs is not correctly displayed on any iPad

    I noticed that the list of Top songs is not correctly displayed on any of our Ipads, but it is on the iPhones.

    Please see the image below.

    It should be "Best songs" in the upper left corner, and where the 2 circles broken are inside should be read (Top Songs) & (Top Albums) in a border, like the other lists.  Because these buttons are missing, I can't use this list.

    I have a family membership to the apple's music, and the problem occurs on 4 separate Ipads, with 4 separate apple ID's

    I erased and reset the ipad, and to restart the problem is solved, however as soon as I finish the music to apple and then soft reboot the problem recurs.

    Anyone else have this or have any ideas?

    I have the same problem and not a clue how to solve this problem:

    Button of the top missing graphics on iPad.

    I guess it's a popular bug...

  • Web sites won't load does not correctly and does not flash videos

    When I visit sites like jeuxvideo.com and joystiq.com, they displayed not correctly and never loading of Flash videos. I already uninstalled and reinstalled twice for version 9.0.1 without change. The second time I used Revo Uninstaller Pro to ensure that I got rid of all the registry entries and the residual files. Does anyone know if this is a recent bug? It started for me about noon yesterday...

    Does not properly what?

    You can attach a screenshot?

    Use a type of compressed as PNG or JPG image to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

    Alternatively, you can try to reset the preferences.

  • HP jet 7500 a desktop: office jet 7500 a print does not correctly

    Hello
    After you run the print doctor, cleaning and aligning the print heads that it is still print does not correctly. the first page comes out perfect so the print quality gets worse, with bits wilted and things missing. just print a page of print quality and black looks at all and the first steps of pink and yellow are strong, blue stripes and then 2nd very faded pink and yellow bar.
    any ideas?

    Hey watch this video of HP, how do I solve this https://www.youtube.com/watch?v=c422Q-EhMXI if this fixed your problem can you give me a point of congratulations. Thank you

  • Qosmio G35-AV600: using Recovery CD I get partition not created error

    I recently ordered a recovery for my Qosmio G35-AV600 disc, because I started in safe mode to clear an alleged threat. Silly me! I forgot the password because I constantly use the fingerprint reader. Well, at the time where, that drives recovery came, I had remembered a password and access I.

    The thing is I always want to format the laptop, but I get partition not created not errors. Is it because the laptop hard drive has SATA or RAID capabilities, or because of the so-called Qosmio player. * If I could format the hard drive, I would not be able to use the laptop Qosmio mode? *

    I searched here and even contacted the customer service and have not found a definitive answer. Customer support's solution was to send to an authorized repair shop. My experience with computer repair shops, is that if the problem is not hardware related, they simply reformat the disks. I could do it myself if I could get help with this "partition has not created" or the partition not deleted"errors.

    Hello

    I agree with you and I also think that this has nothing to do with the hardware failure.
    But who knows, if you started the operating system in safe mode then we shouldn't exclude the hardware problem (IE. HARD DRIVE).

    However, the restore CD contains already all the drivers and you n t need to install SATA or RAID drivers.

    In my opinion, there are bad RAID settings in the BIOS!
    Please check the settings in the BIOS on the third page.

    If you know n t that mean simple settings, you open the user manual and check RAID chapter in the user manual.

    In addition, this could be useful:
    http://support.toshiba-tro.de/KB0/TSB6901K60006R01.htm

  • I have an index page that does not correctly load the css and css works on all other pages of the site.

    http://www.boulderridgecondos.com/ does not correctly load the css, but all other pages of the site loading the css correctly. There is nothing (that I can identify) between pages.
    http://www.boulderridgecondos.com/news.htm

    I guess something is wrong in the css, I inherited this site and have exceeded the css but can't find a problem that would cause this to happen.

    Any help or suggestion looking for something would be appreciated.

    This page is saved in UTF-16 format (Content-Type: text/html (UTF-16 BOM, litte-endian)) in your text editor. The CSS file is sent as ISO-8859-1. Firefox fun to see all the files in the same encoding. The other pages are send as ISO-8859-1 and so use the CSS file. You will need to re - save this page as ISO-8859-1 and download the corrected version.

  • Installation error image free config is not correct

    Hi, I have downloaded the free driver of toshiba config of
    http://support.toshiba-tro.de/tools/satellite/SL20/win-XP/confree/confree-XP-55013-en.zip

    However when I received from goto Setup, I get the folloing error not correct installation image, I tried to open also on another computer, I still have the same error. Any ideas? Thank you.

    Hello

    Did you use the right free config for the right specifications?
    I assume that you have installed the form OS the original CD of Microsoft and not from the Toshiba restore CD.
    Installation of the Toshiba stuff should be done in the right order.
    Chipset utility at the beginning is very important.
    If available common modules must be installed also in the beginning.

Maybe you are looking for

  • Z3200: 79:04

    79:04 problem, z3200 printer stops at this point! ... Q; How can I update the software with a 79:04 software problem? After several startups, same problem... The printer hangs... Any ideas on this issue? Thank you

  • Comment to return to normal mode on vista sp2

    I'm blocking mode without echec.donc no possibility to restore or to use a driver or access a windows udap. What to do please. Thank you

  • I can not able to create the partion in unused space, show the 0x8004240f error in vista

    I can not able to create the partion in unused space, show the 0x8004240f error in vista

  • HDX16 buttons in windows 7

    After upgrading my computer Windows Vista to Windows 7 (64-bit), my ejection and bass/treble buttons do not work. My volume buttons / mute work however, after I installed HP MediaSmart SmartMenu (sp45140.exe). In any case, I tried to install HP Tone

  • Disable rotation

    Hello.. How can I pay my application to only portrait (I mean turn off automatic rotation)