Pavilion 15-p158sa: Bios is not updated

Similar Questions

• Pavilion dv6 - 2138ca BIOS does not recognize mSata

  My son has this laptop and he tries to upgrade using an msata. This has been installed in the slot msata, but from the start, the BIOS laptop does not recognise andboots off the portable drive 2.5 inch (also a SSD). On enter in Windows 8, Disk Manager does not see the drive. I can only conclude that the BIOS has not considered or the other.

  In an article without report, we noticed that the BIOS does not recognize the wifi cards much either, but I'm not concerned about it at the moment. Just want the problem of msata. I mean what would the e point of having an msata slot if you could not use it right?

  kwernerus wrote:
  My son has this laptop and he tries to upgrade using an msata. This has been installed in the slot msata, but from the start, the BIOS laptop does not recognise andboots off the portable drive 2.5 inch (also a SSD). On enter in Windows 8, Disk Manager does not see the drive. I can only conclude that the BIOS has not considered or the other.

  In an article without report, we noticed that the BIOS does not recognize the wifi cards much either, but I'm not concerned about it at the moment. Just want the problem of msata. I mean what would the e point of having an msata slot if you could not use it right?

  Hello

  This site is NOT for an mSATA SSD. It's a location miniPCIe for a TV tuner. I saw some people modding the BIOS, it could be used as a slot mSATA, but I don't think it would work on your laptop. The only successful modding has been reported on some HP ENVY 15-3000 with generation processors Intel first. However, I can help you with the list of authorization for incompatible wifi. That can be removed and users can use any wireless card they want.

• HP Pavilion g6-1107tx BIOS-do I update

  I want to ask the moderators or pro here. Should I update my BIOS because when im searching on Google I found that it says don't update the bios because it can make your computer becomes slower is not contain and difficulty or the improvement of my computer.

  * PSorry, if moderators are going to delete this you are free to do so.

  Welcome to the forum HP, Myhyazid

  The computer gurus turn on internet in all flavors.  You must decide when and if it's time to update your BIOS.

  An update incorrectly applied can cripple your computer.  However, if the update of the BIOS is necessary, and you apply the update correctly the new BIOS can save you a lot of headaches and problems.

  There are factors to consider before update you the BIOS:

  • Your computer has issues that have an impact on its functioning: is something that does not not as expected?
  • Do you find an update of the BIOS on the page WEB of YOUR COMPUTER for your operating system that is newer than your computer's BIOS?
  • Description of the update list a question you find relevant to your situation - in other words, this update could benefit YOUR computer?
  • You all have your completed backups?
  1. You have your data backed up and files?
  2. You have an Image backup?
  3. You have made recovery discs / available?
  4. If your computer has a fingerprinter: you have your exported data?
  5. You have your browser (Internet Explorer, Firefox, Chrome) bookmarks / favorites exported?

  If you answered Yes to these questions,

  Then you can consider to apply an update to the BIOS of your laptop.

  Windows 7

  Computers HP - backup of your files (Windows 7)

  Learn how to create recovery DVDs or to save a recovery image on a USB flash drive to restore all the original software, in the case of a computer problem major.  Includes video.

  HP PC - creation of recovery disks or save an Image recovery on a USB drive (Windows 7)

  Backup of your files can save you the headache of losing important information on your computer. Use this document to find out how to backup your files in Windows 7.

  HP computers - creating and using a system repair disc (Windows 7)

  HP PC - creating and using a System Image to restore your computer (Windows 7) - c02053303

  Windows 8

  HP - backup of your files (Windows 8) computers

  Refresh your PC to solve problems (Windows 8)

  Custom Refresh Image option

  • The nice thing about a custom Image, is that it is 'tailor-made' to your installed programs.  Most of us adjust and change our computers after we set up the first time. one of the main changes that many of us do is add our favorite programs.  The Image of custom refresh allows you to keep these programs when you use Refresh on your computer in Windows 8.

  How to reinstall Windows 8 without losing your files and programs

  -----------------------------------------------------------------------------------------------------------------------------------

  UPDATE THE BIOS

   

  Web page for your computer:
  

  HP Pavilion g6-1107tx Notebook PC drivers & downloads

   

  If you decide to update your BIOS

  • Disconnect all the USB drives
  • Always run power cable
  • Do not touch the system while the update is in progress
  • Optional: leave wireless touch YOU, but turn off the router (make sure that there is no interruption)

  Updated the BIOS

  If you have trouble:

  Restore the BIOS

  =====================================================================================

  I hope this helps.

• HP 8710p BIOS could not update - now infinite LOOP - trying to find - please help!

  Hey all. I've updated my friends to f.20 bios system - and it now appears that the bios update failed, and then it restarts.

  It is an endless loop - which never lets me boot in windows - so I can't go back to a previous version of the BIOS.

  I have read around forums and discovered a method to try an emergency recovery by getting the rompaq bios and by holding down the Windows key + B when I turn on the system.

  Just buy an external USB floppy drive to try this emergency recovery.

  I tried the USB - but it wouldn't work.

  I get different results here - but not what I want.

  With the USB floppy plugged: when I press Win + B - seeing traffic flashes so far much more time, looks like it initializes the floppy drive (green light comes on for a moment) - but then nothing - just flashing caps lock for a little and then finally a restart again in the fate of loop. It never appears to start to read the diskette or find a bios file.

  What I am doing wrong? What can I try? The disc must be leabeled a certain way? Should it be renamed my BIOS file?

  Any help would be GREAT!

  I had a very similar experience.  Here is how I fixed it.

  Download sp41954.exe hereor search for it.

  Double-click the file to launch the application.  If you use Vista or later, close the program, go where he extracted (C:\swsetup\sp41954) and search for the FirmwareUpdater.exe file.  Right-click on the file and select Properties.  Click on the Compatibility tab and select "run this program in compatibility mode for: Windows XP (Service Pack 3).  Open FirmwareUpdater.exe and create a startup disk.  If you are using XP, you can create the sp41954 startup disk directly.

  Turn the laptop off.  Connect the floppy drive USB with the newly created on the portable computer diskette.  Hold all four arrows while turning on the laptop.  Continue to hold down the four arrows until you see the num-lock or flashing caps lock key (don't remember which).  He should be reading the disk.  After a minute or two, the laptop should restart and operate normally.

  When I did, I disconnected the laptop and removed the battery.  I don't know if it was necessary to remove all or not.

  I hope this helps.

• After the BIOS does not update Equium A100-147

  Can someone help me please?

  Updated my BIOS as recommended it using the windows tool! Everything went through fine, saved, verified and flashed the new version. After restarting auto as my laptop does not start before the Toshiba screen, press F12 and nothing, F2 and I just get PLEASE PATIENTER. Guess I didn't try Visa or in fact any OS now.

  Why oh why I did it? Everything was fine before, but advises him to do for full compatibility. Do I need a new Board of directors or is there a key, I can press on to able me to boot from CD to reflash or return to old BIOS?

  Help, please!

  I always say: do not touch the system running well!

  Anyway, in your case, something goes wrong with the BIOS update and you need to go service authorized in your country. They can help you. Sorry but there is nothing that you can do it alone. The BIOS feature is a very sensitive matter and if the BIOS chip is faulty now you can do nothing to make it work again.

  I'm sorry. :(

• Pavilion 15 E014TX BIOS does not recognize the hdware, sort of drivers do not work

  I live in Sri Lanka and have a Hp Pavilion 14 E014TX Netbook, with 4 GB RAM, 750 GB HARD drive, camera, card reader, AMD Radeo 2 GB Graphix and other great benefits.  But unfortunately, none of the drivers work. AMD Radeon driver, for example, reports that the material is not present!

  MSInfo reports:

  Name of the operating system Microsoft Windows 7 Ultimate
  Version 6.1.7600 Build 7600
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of system HP-15
  System manufacturer Hewlett-Packard
  HP Pavilion 15 Notebook PC model system
  System Type X 86-based PC
  Intel Core processor i5 - 3230M CPU @ 2.60 GHz, 2601 Mhz, 2 Lossnay, 4 logical processors
  BIOS Version/Date Insyde F.07, 03/07/2013
  SMBIOS Version 2.7
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "6.1.7600.16385".
  Hp-15\sadhu user name
  Sri Lanka time zone standard time
  Physical memory (RAM) installed 4.00 GB
  2.41 GB total physical memory
  1.36 GB available physical memory
  4.82 GB total virtual memory
  3.70 GB available virtual memory
  Page file space 2.41 GB
  Paging file C:\pagefile.sys

  Material is described here

  (1) can not find the drivers for my Win 7 32 bit Ultimate (legal, unpirated)- but others found with device manufacturers

  (2) I think it's maybe a BIOS problem, but I find no way on the site of HP to upgrade.

  Thanks for your help

  Thanks for help you, but it took the following for repair: 1) win 7 64 bit 2) use to reload the drivers for 'Hp pavilion 15-e016TU + 8 64 bits win7 readers' I certainly didn't use the 64-bit operating system, but it seems that I am stuck. I have this post to help others who may have the same problem - sadhu!

• Example: Pavilion dv7-4142eo: Bios can not find my new SSD

  I used http://www.crucial.com/usa/en/systemscanner and chose the SSD which should be usable in my laptop

  MX100 crucial SSD 512 GB 2.5 "7mm.

  I have used Acronis and saved my old system to a 3.5 500 GB that I put in an Icybox with esata.

  (Another method may be to use usb2 and clone the HDD of old to the SSD but with acronis and usb2, it would take 5 to 6 hours and so I have not tried this.)

  The Acronis cd boot I found the SSD and Esata and restored the backup of the old harddrive (from esata) for the SSD.  It seemed to work fine, but when I tried to start without the boot cd, I got the message "insert a boot disk".

  The I looked in the bios and could not find any hard disk (SSD).  Now, I'm out of ideas and hope for help here.

  My bios is titled: InsydeH20 Setup utility

  Below (details):

  The F.14 BIOS version

  Editor BIOS: Insyde

  I have a newer version of the bios?

  How can I upgrade the bios version?  As I already only the SSD into the laptop, should I put in the old hard drive before I can upgrade the bios or is it possible of this from a USB hard drive and running windows?

  I think I find a newer bios's http://forum.notebookreview.com/hp-pavilion-notebooks/595505-current-hp-pavilion-bios-releases.html

  This? ftp://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49569.exe

  My prosessor is AMD Dual Core IIP340 2.20 GHz prosessor.

  I solved the case.

  Method:

  1. 2010 upgrade to the latest bios

  2 SSD connected with usb2 laptop.  The driver has been installed.

  3. Acronis used to start the cd

  4 SSD equipped laptop thei

  5. connection with the old HDD Usb2

  6. start with the acronis cd

  7 cloning in the menu of acronis (from hard disk SSD) stop when finished

  8 turn off again the og boot cd

  Now I have 7-8 seconds before you see the password field and another 7-8 seconds before the end of the beginning.  5 sec to close.

  Fantastic.

  Thanks for any help.

• BIOS is not updated (no error)

  Hello

  I got a Dell Latitude E6530. The system is completely up to date with the exception of the BIOS. "Scan my system updates" on the Dell site shows that "Dell Latitude E6530 system BIOS A11" is available (current is A09).

  The downloaded executable (E6530A11.exe) works fine, restarts the computer, but without flashing start begins. The operating system starts fine with no error message and that's it.

  Does anyone know why the flashing won't start?

  Hi thorstenk,

  Ideally, when the BIOS update is complete, the computer will automatically restart.

  You can check the version of the BIOS in BIOS. Restart the computer and press F2 at the Dell logo. Now look for the version of the BIOS.

  If the BIOS version is A09, try updating the BIOS by following the steps mentioned below:

  Setup instructions for the universal (Windows / BACKS) format

  • Download the file to the desktop
  • Use one of the methods below to Flash the Bios.
  • Run the utility to update the BIOS from Windows environment
  • Run the utility to update the BIOS of mid BACK (no Windows users)

  Download the file to the desktop

  The E6530A11.exe file is using the universal (Windows / BACKS) format and is designed to be run directly from the Windows environment.

  • Click Download now. The file download window appears.
  • Click on the "Save" button. The window save under is displayed.
  • Select workstation via the dropdown on the right record in.
  • Click on the "Save" button. A progress meter moves as the download is complete.
  • If necessary, click the X in the upper right of the download progress window to close at the end.

  NOTE: Close all applications before running the BIOS update utility. The update utility will restart your system in order to get the new BIOS loaded.

  Run the utility to update the BIOS from Windows environment

  Double-click the marked icon on your desktop E6530A11.exe.The Dell BIOS Flash window appears
  Click on the button continue. The message pressing OK close all applications, shut down Windows, Flash BIOS, then reboot. is displayed.
  Click the OK button. The system will reboot and will end the BIOS Flash.
  Run the utility to update the BIOS of mid BACK (no Windows users)

  NOTE: You will need a bootable USB BACK key. This executable file does not create DOS system files.

  • Copy the E6530A11.exe file to a bootable USB key.
  • Boot from the USB key to the DOS command prompt.
  • Run the file by typing Y:\E6530A11.exe (where is the drive letter where the executable).

  Waiting for your answer!

• m9400t BIOS does not update

  HP posted 5.32 BIOS update today, but I get an error when you try to install it on my m9400t.  I get two boxes of error as follows:

  "install.exe" AFUWIN BENS.32/b/p/c/q

  Cannot perform the specified command line

  I restarted in safe mode, rebooted Windows with everything and even clicked on run as s Adminitrator, even if I was in the administrator account.

  I also downloaded the file three times and even tried to run out of the office with him remains off including sidebar.

  Ideas appreciated as support HP seems puzzled.

  Thank you;

  Al

  Good news, the new link for a Meg 1.67 file worked fine on Vista 64 bit with cable Tuner equipped system.   I don't have to reboot twice for all four cores to be noticed, as the initial start has only shown a CPU two core.

  I wish everyone a happy holiday and without surprises of HP more!

  Al

• u430p update of the bios could not update 7ccn61ww

  I did start the laptop to legacy.

  whenever I run the bios update, I get this error. I use this http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-u-series-laptops/ideapad-u430p...

  Link to image

  Comment to Moderator: Image (s) converted into programming. For more information, please visit: all display images in the Forums.

  Leroy_roy wrote:

  It has the same problem.

  I think your only option is to call Lenovo for a possible repair by them.

• Y510p BIOS will not update

  I just tried to install the new BIOS for my y510p that came out July 2, but when I tried to run, I got "BIOS version compare error! I have no idea why this is happening. Any help would be appreciated, I know how much we all love a new BIOS . Thank you.

  error is due to Flash Back inside the bios is set on {disabled] enable first and then exit save changes once your OS again you can re-run the .exe file and it will work correctly without error}

  It will restart after producing runned .exe and then you will see a flashing screen where it will be at 3.05 version of your computer's bios portable flash

• HP ENVY x 2 11-g010nr: HP ENVY x 2 11-g010nr BIOS will not be upgraded

  My HP ENVY x 2 11-g010nr laptop has BIOS F.08, dated 12/03/2013. HP support for this model page has a download of SP69946.exe to upgrade the BIOS to F.14A, as of 12/11/2014. HP recommends this update for the battery life improved, which is a problem I see on this laptop.

  I have downloaded and run the executable that installs c:\swsetup\sp69946 and then starts flashing the BIOS Windows called InsydeFlash v4.37 utility. A dialog box appears saying "no WMI. Continue? "I continues, and a message appears briefly 'load successful leader' after which the laptop restarts. The BIOS is not updated.

  Someone knows how to make it work? WMI is maybe not on this laptop? WMIDiag.exe downloaded Microsoft to see if it is a problem of WMI, but I get a message saying "this app can run on your PC."

  First of all, thanks for reading and you reply to my message! The part the more difficult to fix such things receive the appropriate information from the HP. I know that you guys have the knowledge, it's just a matter of getting to you. It's a simple matter to fix once I found the information I needed.

  The instructions in step 4 you referred me to was the exact instructions I was following, without success. As I said, the laptop would give a WMI error and restart spontaneously at the end of the so-called update.

  I kept read below on your page linked and is come to "Accessing UEFI at system startup" a little less "step 3: open the Diagnostics menu UEFI Hardware." I put the BIOS update files created by sp69946 on a USB, restarted the laptop, press the ESC key to open UEFI and follow-up instructions for updating the BIOS. Simple. I'm not sure if the BIOS file was already there and waiting for me to open UEFI and do the upgrade or if he pulled the file on the USB key, but it worked.

  This linked page was good information. Thanks again!

• Pavilion 23-b026 BIOS problem

  Pavilion 23-b026 BIOS does not boot EFI of CD/DVD. Even if the start-up devices entry is edited and saved, ATAPI CD/DVD does not appear in the list of boot devices the next time. Is there any BIOS UEFI editing tool?

  (this to make Windows 8 PC + Linux dual boot)

  It turns out that, UEFI boot loader needs FAT32 file system to read the startup file EFI, where the CD/DVD is excluded. USB-disk/pen drive is the option.

  I burned the ISO on usb disk linux & can boot the system into EFI him! Has successfully installed Linux & Win - 8 + Linux work correctly in dual-boot mode.

• Satellite R830-143 - update of the BIOS does not support this operating system

  Hello

  I received a notification via Tempro that he did not have a BIOS upgrade. I downloaded the ZIP file (bios - 20120209125153.zip), extract the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.

  The package runs, give the progress bar "extract files...". ", then displays a dialogue entitled"TOSHIBA BIOS package Ver.4.1.2"that says:"this package BIOS does not support this operating system."

  I am running Windows 7 Home Premium 64 - bit on a Satellite 830R-143 with the short part No. PT32LE

  Does anyone know what is the problem?

  Thanks in advance for your help...

  Hello

  You have problems with the laptop?
  If not then why you want to do the BIOS? Just because the new BIOS is released?
  I would not change anything if my laptop is running correctly.

  However, the update of the BIOS requires the VAP (value added package).
  So remember that this PPV is installed correctly. If this isn't the case, so far.

• Qosmio G30-126 - BIOS is not able, updated on this configuration

  Hello people

  I have a problem with my computer where the Toshiba Service has replaced my motherboard. (a lack of display adapter).
  I now have the computer but the BIOS is very old, Version 1.90. I downloaded the latest version of the Toshiba site which is 3.90.
  When I try to update I get the message "error. BIOS update is failed. BIOS can not be upgraded on this configuration.

  I have Windows 7 and all run in administrator mode.
  I boot the WinPE CD, but still not able to do any update to the BIOS level.

  The old BIOS does not support USB boot and has other issues that make the upgrade, an important factor.

  An assumption I made is that the BIOS should be upgraded by small steps, i.e. the version of 1.60 to 1.70 etc until I arrive at 3.90.

  Any help would be appreciated.

  Hello

  First of all why do you this update? Is it really necessary or do you see a reason for this? If this isn't the case, forget this update. It of really not necessary!

  In any case, the BIOS update you can do if you correct all files in archive zip first. Run the update as an administrator, and then close all running programs.

  You wrote that you try this update on Windows 7, what is happening on the preinstalled OS from Toshiba?