Pavilion 17.3 inch screen upgrade

Similar Questions

• P158sa Pavilion: Pavilion of the p158sa screen replacement

  Hello, I was wondering if I could pass the current screen of 1366 x 768 to a 1920 x 1080 in my hp laptop I have included the the model number of the screen I watched and it was in the pdf file of repair on the Web page of model, I'm looking for in this because I have allot of 3d and after effects editing work and need a lot of work space.

  Hi there @Nathan_Huck

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you request it possible to upgrade the display of your laptop to another of the HP Pavilion 17 Notebook PC HP Pavilion 15 Notebook PC - Maintenance and Service of Guide

  I reproduced the list of screens compatible/taken in charge for 15-inch screens, and the one you mention is there, so yes it is an available option.

  15.6 LED BrightView HD HD WLED SVA SVA flat screen available for Windows 8.1 (including screws) 762513-001
  15.6 AG WLED HD touchscreen with bezel (including screws) 764622-001
  15.6 AG WLED full HD SVA (including screws) 764623-001
  15.6 AG WLED full HD touchscreen with bezel (including screws) flat display panel 766687-001

  If you want to continue that, then you can our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• How to connect two Dell UltraSharp U2414H 24 inch screen LED monitors daisy chain?

  I just bought two Dell UltraSharp U2414H 24 inch screen LED monitors, but it is unclear how two monitors must be linked together. Cable does not seem to be provided? Can anyone help?

  You have the L412Z XPS 14Z. It has the following video ports back =.
  CDM (Mini DisplayPort)
  HDMI

  XPS 14Z L412Z CDM on--> Dell mDP to DP cable--> #1 U2414H DP in
  XPS 14Z L412Z out HDMI--> HDMI to HDMI Cable--> HDMI U2414H #2 in

• Try to upgrade to Windows 7 Home Premium and can't get past the blue screen upgrade now

  Try to run the upgrade to WIndows 7 home premium to clean virus problems. have tried for days, unable to get past the blue screen upgrade now.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Monitor leaving them a 2-inch screen on the right side of the computer laptop hp Compaq cq40

  Original title: full screen

  After that I installed Windows 7 in my hp Compaq cq40 laptop monitor leave a 2-inch screen on the right side of the screen. I have set the screen resolution, reinstalled the latest driver. but still the screen is not displayed in full screen. If I install Windows Xp, then the display is in full screen mode. How can I get a display full screen with windows 7?

  Hello

  I suggest you to check if the steps help.

  In Windows 7, click on the F11 key at the top of your keyboard. This will make Windows return a mode full-screen.

  To cancel the mode full-screen and window restoration to normal display, press the Esc (Escape) key at the top of your keyboard.

  Check your graphics card catalyst Center and change the settings from there.

  I also suggest you go through the help article and check that it helps.

  Use and adjustment of your monitor

  http://h10010.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c01641922&LC=en&product=3752104#N1377

• It is not possible to use "Show pointer" on 7-inch screens.

  It is not possible to use "Show pointer" on 7-inch screens. The second pointer on the left, who would normally stimulate the ALT is not visible. The pointer is hidden behind the left hand tool bar! I use Photoshop Touch on a 7¹³ of Nexus and I, it's a great software and it became even more impressive if that problem is fixed ;-)

  I can't repro this on my Nexus 7 2013 I can see the 'hold' in the bottom icon to the left, but it is a bit hidden by the icon 'redo '. I can still tap to finish the operation, even if I can do it again.

  I was also able to get around by touching the icon screen, 1st icon from the upper right. This allows a full view of the "hold" icon

• HP Pavilion G6-2146sl: white screen after upgrading an AMD A6 - 4400 m for an AMD A10 - 5750 m

  Hi all, I upgraded my HP Pavilion G6-2146sl of the A6 - 4400 m for the A10 - 5750 m, but when I turn on the PC, the screen stays black and nothing happens. What can I do? Thanks in advance.

  Everyone here said it that this processor work? It is not listed in the manual and is incompatible just pure and simple. It will never work on this motherboard. Here is the Manual:

  Manual

  Top of page compatible processor is

  CPU AMD® A10 - 4600M (3.2 GHz/2.3 GHz, 1 600 MHz/4.0 MB L2 cache, DDR3, quad core, 35W)

  I hope that you can exchange it for one that will work. Post back with more questions.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP PAVILION 15-p010sr: replace stock to IPS 15.6 inch screen

  Hello! I have the stock display in my model 15.6 inches. I can replace it on some larger IPS overview screen.

  And if you can, give me link in the store on screen

  Thank you and sorry for the bad English.

  NIKSO wrote:

  Hello! I have the stock display in my model 15.6 inches. I can replace it on some larger IPS overview screen.

  And if you can, give me link in the store on screen

  Thank you and sorry for the bad English.

  No, you can't just mix and matched... we ask you to follow these instructions to find what works for your P/N...

  How can I find my model number or product number?

• Pavilion dv6t-7000 Quad Editio: upgrade screen 1366 x 768 to 1080 p

  
  

  Look at page 28 of the manual even. HD and FHD panels using a different cable, so we know that your cable for the 1366 x 768 will not work on an FHD 1920 x 1080 screen. You can try to order the set of HP.  I ran among the FHD on HP Partsurfer Assembly part numbers and they are not in stock. To do this, the much cheaper is to order only the FHD Panel on eBay and order the right cable separately.

  The right cable part number is 682057-001 and HP has it in stock at $52:

  FHD cable for Intel processors.

  I couldn't find the FHD cable anywhere else.

  Then, you can save money on the Panel by buying it on eBay for around $75:

  http://www.eBay.com/ITM/15-6-WUXGA-led-screen-for-HP-682090-001-/161575189357?PT=LH_DefaultDomain_0&hash=item259ea1bb6d

  $125 dollars or more to move to a screen 1920 x 1080 is probably cheaper than we thought it would be. If HP had the whole Assembly, it would be more than $200. If you are outside the United States, after back and we can try some other sources.

  Personally, I like the matte screens. Glossies and mattes are the same panels. Glossies are less expensive because they actually just leave off the coast of the last stage of the application of the coating material Panel quality varies a bit in order to get shiny screens shabby and pathetic of the matte screens. On ebay, I buy only sellers with high feedback and sales figures and usually get good quality panels. I've probably changed in recent years on mobile billboards to a hundred, and I like to think that I know how to get them as cheap as possible.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• upgrade memory for HP Pavilion 11e110nr laptop touch screen

  Can someone help me with the specifications?  I can't find any memory module on the HP site, and Crucial doesn't have this model in their database yet while they were not able to offer a.

  Thanks for the link to the the system scanner.  I ran and found 2 compatible modules.  I chose the faster module, part number: CT102464BF186D.

• HP Pavilion p6210y: Office flashing after upgrade Windows 10

  I have a flashing desktop (goes black and office) after upgrade to Windows 10.  Once connected, it is fine for about 10-15 seconds, then it starts flashing. I couldn't do anything - click on anything except CTRL-ALT-DEL to go to the Task Manager.

  I did the upgrade 2 x already. Before my first attempt, I do nothing with my PC - I did not update the driver. When I arrived the office flashing after improvement, I panicked and immediately brought back to Windows 7. I was able to get to the window of recovery during the period of 10-15 seconds just after the connection. Fortunately, he returned to Windows 7.

  After the first test, I read a little about the similar problem and so I tried some of the proposed solutions - update the drivers on my PC, to disable reporting services Windows (all on 10 to win), to try to go to Safe Mode.

  So I tried again. I updated all the things I can to update (for most drivers) before the upgrade. Do you have PC Clean up. I had the office flashes again. It's the same thing. So while they are flashing, I tried to disable the windows reporting services that is very difficult to do with the Office of flashing. He did nothing clearly. So I went in Mode without failure. After starting in safe mode, I got the normal screen for about 5 seconds, but a blue window quickly flashed and then the desktop on Mode without failure just turned black, only the visible cursor.

  So, I rolled back to Windows 7 new.

  I don't have a lot of things/programs on my PC that I uninstall programs right away if I know that I will not use. I do scan of cleaning/Virus from PC on a regular basis.

  Information about my machine:

  HP Pavilion p6210y

  Windows 7 Home Premium, 64-bit

  Video card: NVIDIA GEForce 9100

  All the suggestions/help will be very appreciated.

  The only thing that solved the issue is reset my machine while keeping my personal files.

  I've never understood what really caused it.

  Thus, after the upgrade when the screen is flashing, I have reset the PC.

• HP Pavilion m9275.nl: HP Pavilion m9275.nl - scrumbled screen

  Hello
  
  I have this computer desktop HP Pavilion m9275.nl and for a few weeks, the screen is scrumbled. Sometimes on the VGA and HDMI and multiple monitors.
  
  What is more likely?
  
  Is my video card failure? Or could it be the motherboard?
  If it is the video card, I can buy it any modern video card or my choice limited by the motherboard?
  
  Thanks in advance!
  
  Sjoerd-Jaap Westra

  It's probably your video card or your RAM. I have a link to the video card that would work on your power supply (300W). http://m.newegg.com/Product/index?itemnumber=N82E16814132026. I looked at the specs of your model. How much RAM you have on your machine? I would recommend that you upgrade the ram just in case.

• Pavilion dv6: 10 for Windows upgrade fails Pavilion dv6 after update and entry of password

  After updating my Pavilion dv6 Windows 7 64 - bit of Windows 10 64 - bits, the connection to the computer to update resulted in a machine stuck with white (gray) screen. The upgrade seems complete without any problems. It is only after a reboot with the machine being upgraded and after entering the password that the lock status was encountered.

  You can see if any of the suggestions in the linked thread works - but DV6 succeed well in Win10, and if none of these work, you need to consider restoring to Win7: HP Notebook PC - computer starts but the screen remains empty (10, 8 Windows) | HP® customer support

  I have a DV6 and after many hardships, restored to Win7 because I felt that an older OS where everything worked was much higher than a more recent OS where many things were "broken."

  And there is no driver HP Win10 for the DV6.

• Pavilion DV6 3055tx blue screen after RAM Upgraderei

  The product name and number: HP Pavilion dv6 3055tx

   

  Pre-installed RAM: 3 GB
  

  Operating system: Windows 7 Home Basic 64 Bit (90 days)

   

  Error message (if any): blue screen on startup of the BONE
  

  All changes to your system until the problem occurred: RAM upgrade

   

  In the title of the topic, include a brief and accurate description of the problem and your product information: I use this product for a long time... Good...

   

  One day, I thought to upgrade my RAM, so I ordered "CRS 4 GB LT_CMS04GX3M1A1600C11"

   

  Corsair 4 GB DDR3 RAM simplified eBay India

   

  After I received the product, I open the back panel and removed the 1 GB RAM Samsung and Corsair inserted one I ordered.

   

  After this, I restarted my system

   

  When starting Windows came to loading blue screen suddenly comes and laptop restarting

   

  Then a black screen comes with 1. Launch the tool to restart System 2. Start Windows normally

   

  I gave my chance for both, but the same blue screen.

   

  After that, I removed the two Rams and inserted as a single Corsair

   

  Same blue screen

   

  Then I open BIOS and it says 4096 MB installed memory

   

  After that, I inserted the 2 GB with it means Total two-channel 6 GB

   

  But again Blue Screen and BIOS saying 6144 MB

   

  What is the problem?

   

  Please help me solve the problem.

   

  The eBay seller is ready to replace the RAM, but I want to know if this could be a compatibility issue.

   

  Thank you... Waiting for a good answer

  Hello:

  I can't find any specs on that you bought it from memory.

  Your PC will run from 8 GB of memory, but you must be careful as to what memory you select.

  You must get the PC3-10600 (1333 MHz) memory and it must be of low density.

  You can't get PC3-10660 or PC3-10666 memory and cheap will be high density and will not work in any case in your laptop.

  You can see this related posts with someone who had the same problem, and when he bought the good memory, his problem was gone.

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/dv6t-3000-RAM-upgrade/m-p/2492127#M17965

  I think you bought PC3-12800 memory and this is probably the high density - two bad things.

• Pavilion P6630: Failure of RAM upgrade

  I have a HP Pavilion P6630 with 2 x 2 GB DDR3 - 667 MhZ sticks inside (factory standard).

  According to information I found on the motherboard in combination with my Windows 7 Home Premium 64 - Bit, support maximum memory is 16 GB.

  So, I advanced and bought 2 x DDR 4 GB 1333 MhZ (PC3-10600 Dimm). Once again, according to the information I have found on the HP site when I looked up my model.

  When I took the original poles of the blue orbits (M4 + M2) and replaced by my new, the computer is stuck on the "intro" screen (where it says press F10 to enter the BIOS). He didn't get into the BIOS, it of just sitting there and did nothing.

  From there, I tried all possible options:
  Put the old back and added the new in the empty slots, leading to the computer going on market and stop and and and...

  New sticks seem to work because the system recognizes in M3, M4 and M1, M2 of installation. Here is the single channel configurations, however. And once again, when in these slots, the system go away and start and stop.

  As already said: I tried all possible combinations of old and new and locations, but there is really only one that works: my two older in their original blue locations.

  I did a reset of the CMOS and I took out the battery for half an hour. No results.

  And Yes: I push the sticks in lampholders enough far, etc.

  I'm desperate! Hope someone can help me.

  The trick to a successful upgrade memory is:

  Memory modules is not not the sellers have to sell with the HP published specifications of the motherboard requirements. It is a strategy to upgrade memory that quite often results in disappointment and a situation of no bootable.

  Purchase of memory modules that are guaranteed compatible memory manufacturers. If possible, stick with the manufacturers of memory known as Crucial, G.Skill, Kingston, Hynix, just to name a few.

  Add memory to the memory modules already installed unless you are absolutely identical to the original modules in all respects.

  Memory manufacturers use configuration utilities on their corporate Web sites.