Pavilion 20 all in one PC: interesting, my computer says its touch screen when it's not...

Similar Questions

• HP Pavilion 22-2100np All-o: HP Pavilion 22 all-in-One Max RAM

  Hello
  
  I looked up ram max that I can install it in a 22 HP Pavilion - 2100np all-in-One, I know that I have only 1 slot for it. But I can not find anywhere the max. I think updating to 8 GB or 16 GB at the momento. We know if it will work?
  
  Thanks in advance

  Thank you. Update patient to 16 GB since I'm on 64-bit windows of 8.1. And I am really surprised at the quick response
  
  Thank you once again

• Pavilion Touchsmart all-in-One: how to install the SSD in Touchsmart F234? What form factor is necessary?

  Will be HP 20-f234 enhancement by replacing the HDD with SSD.  Two questions:

  1. is there a video (or even a set of complete step by step instructions would be) Bay of any place that illustrates how to get the HARD disk inside?  (Remove screws, etc.)

  2. what form factor SSD is supported?  That is, will I need an adapter of some sort support if I have a 2.5 SSD "?

  Thank you.

  Seems to be a 3.5 "desktop drive

  How to replace the hard drive

  http://support.HP.com/us-en/product/HP-Pavilion-20-all-in-one-desktop-PC-series/5359028/model/5365334/document/c03690508/

  Your support page

  http://support.HP.com/us-en/product/HP-Pavilion-TouchSmart-20-F200-all-in-one-desktop-PC-series/5359028/model/5365334/how-to

• have hp pavilion 23 all of one and no ability touchsmart

  Purchase hp pavilion 23 all-in-one with Windows 8 and do not seem touchsmart ability?  Feel stupid but have to ask.  It is downloadable as App or my hp is not compatible with the touchsmart. ??

  When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the back or the bottom of your computer.

  A "Touch Screen" is a component material that allows to provide with the Enter key and is not something that can be downloaded and installed as an "app" or the software.

  Please click the White Star of KUDOS to show your appreciation

• How to clean the fans on my HP Pavilion MS227 all-in-One

  I need to blow the dust out of my fans on my HP Pavilion MS227 all-in-One. This model has no trick, I can't find anything on the web to explain how to get to the fans so I can clean the dust.

  Hello

  Your AIO PC is only a 95 Watt system.  The best you can do is to use a can of compressed air and blow air through the upper and lower holes.  I doubt that your willing AIO with a fan and if there is a there is not a service procedure.

• Where can I buy a bag for my all-in-one VAIO Tap 21 computer? VGPAMT21

  Where can I buy a bag for my all-in-one VAIO Tap 21 computer?

  The model of the bag is VGPAMT21.

  This b ag was sold out for the last 6 months online. Do you know where I can buy one elsewhere?

• Pavilion all-in-one 23: Add the second monitor to HP Pavilion CTO all-in-One-23-p110z

  As it is configured, the factory is the "HP Pavilion all-in-one-23-p110z CTO" capable of supporting a second monitor?  I see NO obvious "video inputs" ports.

  Thank you!

  Hi @beckinista,

  Thank you for being an active member of the HP's Support Forums.   I understand that you would like to know if you can connect a second computer monitor 23-p110z all-in-One CTO Pavilion.

  The specifications of the motherboard of your computer show that there not a secondary display port. I have included HP Pavilion 23 - p110z all-in-one CTO Office product specifications and configurable Options and HP and Compaq Desktop PCs - specifications of the motherboard, Boa for your reference.

  I hope the above helps.

• HP Pavilion 20 all in one

  I'm a failure ID: 90FR7G-00076J-PXPAXG-60TD03 Hard Drive short DST.

  The PC is not under warranty. This error means that the hard drive is going and if she is there a manual to replace the hard drive in one of these units. Model # 20 - b010

  Thank you

  Hello Grnandrw,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you received the error failure ID: 90FR7G-00076J-PXPAXG-60TD03 Hard Drive short DST on your HP Pavilion 20-b010 All - in - One desktop PC. It is an indication that your hard drive has failed. I'm you provide a HP support document: removing and replacing the hard drive in HP Pavilion 20-b000, TouchSmart 20-b000/20 - f000 and Touch 20-b000-20 - f000 all-in-one desktop PC series. As stated in the document:

  "Follow the steps in this document to replace a hard drive of your computer. If you want to add a hard drive with more capacity (upgrade), know that you can upgrade to any hard drive size answering the type of connection in your computer. It is most often serial ATA (SATA or eSATA). Also, know that there are formatting limits that may be encountered for more 2 TB drives. To access all the data on drives over 2 TB format the drive using GPT or create multiple partitions less than 2 TB. »

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a wonderful day!

• 23 Pavilion: Pavilion inadmissible all in one office

  During the night my all-in-One HP Pavillion was a whirling noise, and then the shots as if it was updated.  Since then, I have not been able to start.  If you press the Start button, it flashes for about one second and turns off, out of order?  I have McAfee Security and it works every day.  What could be the matter?

  Hi @dcw2482,

  Thanks for reaching out! It is a great location to get resolutions and interact with experts from the community. I understand that the computer power not on. It will be a pleasure to help you.

  You did a great job on diagnose the problem on your side. Kudos to you on this point. It is always a privilege to work with tech-savvy and technically competent customers like you. We greatly appreciate your relationship with HP.

  It looks like a hardware problem with the computer. Isolate the problem correctly.

  Please do a hard reset first. Link for the hard reset: http://support.hp.com/za-en/document/c01463028

  Then try turning on your computer. If it works, then the issue should get resolved. Otherwise, please try a different wall socket, bypassing any power strips. If possible, please try a different power also cord. If nothing works, the computer needs to be repaired. Please contact the HP support by phone by visiting this link: http://hp.com/contacthp

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• HP all-in-one printer install software "think" the software is already installed - it is not.

  I have a printer all-in-one HP Photosmart C8180, connected via USB directly to my Windows 7 system.  Over time I installed, updated and uninstalled the software.  At the present time, when I try to install the software is properly run, it did not install the software.  If I click on "Advanced" installation option, I see that it "thinks" most of the support software is 'already installed' and it won't install it.  I tried to uninstall, but it will not uninstall it (because it is not installed).

  

  I can print fine, I can get the driver installed, but I would like for all supported software must be installed also.

  How can I get the installation package to acknowledge that the software is not "already installed".

  Hello

  Open the content of the CD, run the Uninstall L3. at the bottom of the path...
  CD > Util > CCC > uninstall L3.bat

  Once it is completed, and then restart the PC and reinstall the S/w.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• All of a sudden my HP all-in-one (j4580) only displays the FAX info on screen and will be only TELEC.

  When trying to print on the web, I sent the print request. Only the HP Fax display comes on the screen. When I try and use 'file' to try to print (on my XP taskbar), it won't. The machine is ON Print (b + w) I have the HP all-in-one, J4580. I'm not techie so please be nice!

  You may need to do a reset full semi on the machine. I've included instructions to do this:

  • Unplug the power cord from the HP all-in-one device.
  • Wait 20 seconds.
  • Press and hold # and 6 while plugging in the power cord from the HP all-in-one device.
  • Release the buttons after the HP all-in-one device to start.
  • The HP all-in-one device will now reset to the default settings.

• HP Envy Touchsmart all-in-one: HP Envy 23 computer stopped working

  Our Envy of HP TouchSmart All - in - one PC off while in use, as if the power went off.  We have unplugged and let it sit for 12 hours and plugged in.  The power cord green light is on and the white light where to plug in the adapter at the rear of the central unit is on, but it won't.

  Is there a trick to get back on?

  Model # 23 - d034

  Serial number is [removed personal information]

  Product # H3Y87AA #ABA

  My son disassembled the computer. The motherboard was fried.

• C7280 all-in-One connected wireless to modem-router needs a password when it is fed - up.

  Do you have examples of wireless connection to a HP Photosmart C7280-all-in-one to a network managed by a modem-router method NB6Plus4W? The modem-router attach also your desktop of Windows XP by using an ethernet cable and a laptop computer to Windows XP wireless using the default (wireless) SSID and password (a1b2c3d4e5).

  The wireless connection between the modem and router and the laptop happens automatically when the modem-router and laptop computer are powered.

  The wireless connection between the modem-router and the HP Photosmart camera does not automatically. When I put power on the HP Photosmart camera, I then use the setup on the Photosmart button and type manually in to the Photosmart (a1b2c3d4e5) password. The SSID also displays wireless, it doesn't have to be retyped.

  Do you know if there is no method or HP configuration that will result in the automatic installation of the camera HP Photosmart to occur when it is powered?

  What I am complaining about is having to manually type in the HP to HP password whenever the HP is powered.

  Go to Setup > network > advanced settings > IP settings and now select Auto and press OK. See if this stops the question.

  If that doesn't work, then go to settings > network > restore default settings of the network, and then run the Wireless Setup Wizard to connect to the network.

• Sony VAIO all-in-One PC 20 tap computer touch screen LCD SVJ20214CYB Windows 8.

  I want to buy the Sony VAIO Tap 20 all-in-One PC computer touch screen LCD SVJ20214CYB Windows 8. I'll be able to use a Wacom digitizer pen in Windows Journal and Office OneNote?

  Hi Treoc,

  Thanks for choosing Microsoft Community!

  Want to know if the Wacom digitizer pen works in the Windows Journal and Office OneNote, I suggest to contact Wacom Digitizer support.

  http://community.Wacom.com/

  I checked in the Center of Windows 8 compatibility for more information about this device, unfortunately it is not listed there. You can also check using this link.

  Also see this link for Windows 8 features:

  http://Windows.Microsoft.com/is-is/Windows-8/meet

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• Using Dell Photo All in One printer 924 with computer Inspiron laptop with Windows 7

  I can't get my Dell Photo All in One Printer 924, to work with my new laptop Inspiron with Windows 7.  I tried the divers and untilities to load the disc that came with the printer (which I have used before with a Dell PC) but the software is not complete loading and I get no explanation.  Go to the Dell site for pilots etc was no help.

  Dell is not win7 driver/software for this model, later are for 32-bit vista