Pavilion HDX 9480eg (same as HDX9300) and Win7 64?

Similar Questions

• Win7 hp pavilion n040se 15 notebook pc driver for win7

  Hello

  I need win7 hp pavilion n040se 15 notebook pc driver for win7!

  anyone can help me?

  You should be able to use most drivers of this model. Don't use a BIOS or Audio from there.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 6521367 #N1162

  Audio Realtek: Choose High Definition Audio, accept the agreement, download and install the driver of first or second depending on whether you installed Win 7 32 or 64-bit:

  http://www.Realtek.com.tw/downloads/

  Don't know what wireless card you have since HP uses different brands. If the doe doesn't work, you will need to get the id of the hardware it from Device Manager.
  
  IF you have Atheros QCA9000 Wireless Qualcomm:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359407 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_128686_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Atheros Bluetooth:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359407 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125590_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• I have a laptop Windows XP and win7, connected via a wireless router.

  I have a portable desktop and win7 winXP connected via a wireless router.  Can see the XP machine with the file full access Win 7 but not vice versa.  On XP, clicking on C: of the laptop gives error "C: is not accessible. You have no permissions... "How can I fix it?  As far as I can tell all together relevant upward is correct on Win7.  No password have been set.

  Hello

  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous Working Group sharing methods which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  -----------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

• groups of network XP and win7

  is there a way to get my xp and win7 computers in the same network group?  I wnt to use easy transfer but my new machine can not find the old

  Hello

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  -------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Push by MDS Simulator and Win7

  Hi all

  I have a new computer with Win7 Professional installed and I had trouble getting the BlackBerry Simulator to recognize the push in my application.  I also have my old WinXP computer that gets the push with my BlackBerry application "under development".  That is, it works on Windows XP but not on Win7.

  I use Eclipse Galileo with the BlackBerry plug-in.  Develop with BlackBerry JRE v4.6.0.23 on BlackBerry 9000 Simulator.  The MDS Simulator is installed in C:\BlackBerry Email and simulators of Services SDM 4.1.4 avoid C:\Program Files security restrictions.

  Configuration of the Simulator in the 'rimpublic.property' file is to remove the # from the line 'push.application.reliable.ports = 100' at the bottom of the file.  No other changes are made.  The MDS web server started on port 8080 (default).

  On the Windows XP computer, I start the MDS Simulator, then I start my Eclipse application and the BlackBerry Simulator starts.  I'll leave my app and open the web browser and launch a Web site (any) and I'll see the work of MDS Simulator.  That is it will be showing the entries in the window back of MDS.  It's what I expect. Then I run my application and send the thrust and everything works fine.

  On the Win7 computer, I use the same version of BlackBerry Simulator 4.1.4 the same version of Eclipse and the same version of the BlackBerry Simulator.  When I access a Web site on the BlackBerry, nothing happens in the MDS Simulator Dos window.  I get a web page, but I think something is happening in the MDS Simulator Dos window.

  That's where the problem lies, in my opinion, but I'm not sure.  Push sample instructions say to launch Web site on the BlackBerry browser to get the push to work properly.  Is this true or am I wrong interpret this?

  Also on the Win7 machine, even if the BlackBerry browser does not have it that I'm waiting on the MDS Simulator, if I push my data in any case, I see the MDS recognizing thrust.

  Long story short, my BlackBerry application will not recognize the thrust of my request to push .net on Win7, but works fine on Windows XP.

  I've been watching for the last 2 days and have largely done a search, but there is not much info on this type of problem.

  Any suggestions / help would be greatly appreciated?

  Here is some information displayed in the window back Simulator MDS after I send my push.

  <2010-07-16 09:11:26.080 CDT>:[127]:::
  <2010-07-16 09:11:26.081 CDT>:[128]:::
  <2010-07-16 09:11:26.082 CDT>:[129]:::
  <2010-07-16 09:11:26.082 CDT>:[130]:::
  <2010-07-16 09:11:26.083 CDT>:[131]:::
  <2010-07-16 09:11:26.084 CDT>:[132]:::application/vnd.rim.html>
  <2010-07-16 09:11:26.084 CDT>:[133]:::application/vnd.rim.html>
  <2010-07-16 09:11:26.084 CDT>:[134]:::application/vnd.rim.html>
  <2010-07-16 09:11:26.084 CDT>:[135]:::application/vnd.rim.html>
  <2010-07-16 09:11:26.088 CDT>:[136]:::text/css>
  <2010-07-16 09:11:26.090 CDT>:[137]:::application/vnd.wap.multipart.related>
  
  <2010-07-16 09:11:26.091 CDT>:[138]:::application/vnd.wap.multipart.alte
  rnative>
  <2010-07-16 09:11:26.091 CDT>:[139]:::application/vnd.wap.multipart.mixed>
  <2010-07-16 09:11:26.094 CDT>:[140]:::application/vnd.wap.wmlc>
  <2010-07-16 09:11:26.095 CDT>:[141]:::
  <2010-07-16 09:11:26.095 CDT>:[141]:::
  <2010-07-16 09:11:26.095 CDT>:[141]:::
  <2010-07-16 09:11:26.095 CDT>:[141]:::
  <2010-07-16 09:11:26.095 CDT>:[141]:::
  <2010-07-16 09:11:26.097 CDT>:[142]:::
  <2010-07-16 09:11:26.105 CDT>:[147]:::
  <2010-07-16 09:11:26.126 CDT>:[152]:::
  <2010-07-16 09:11:26.146 CDT>:[157]:::
  <2010-07-16 09:11:26.166 CDT>:[162]:::
  

  Closure of this thread that I started another one who works on the httppushdemo getting work with Win7.  See here http://supportforums.blackberry.com/t5/BlackBerry-Push-Development/MDS-Simulator-and-Win7/td-p/54780...

• Problem with dual booting BACK and Win7.

  I tried to configure a machine as follows: 0 = 250 G SATA drive with 512 byte sectors BACK 6.22, only fine boots. Disc 1 = 500 G SATA with 4K with Win 7 sectors. When you install Windows 7 on disk 1, it ignores the C: drive on drive 0 and affects the C: drive letter in the windows partition. Because the c: drive on drive 0 is no longer a drive letter designation, no bootstrapper is installed. I cannot change the letter of the windows system drive, in disk management, and as such cannot get BACK start as the C: drive. This is new behavior, I did install it on NT 3.5 thru XP on the same reader or different readers without fail. Win 7 enter the C drive letter for the system drive? If so I'll have to go back to XP for double boot installs. I get this same behavior on a single disc with the two BONES. If anyone has an answer, I guess that the next option may be a third-party boot loader.

  I need a startup BACK too, the only way for me to do is to install BACK first, and then XP and win7

  After that it starts on win7, xp (earlier version of windows), select and then from there BACK.

  It's 2 steps instead on the 1 step :) but it works

• Me and my dad is from the same Apple ID and I want to set up his own, but how it will get all his contacts, photos etc from my Apple ID? Or he will lose all? or I could keep them saved for him and send more via an application any?

  Me and my dad is from the same Apple ID and I want to set up his own, but how it will get all his contacts, photos etc from my Apple ID? Or he will lose all? or I could keep them saved for him and send more via an application any? I don't know how to resolve this issue, if someone could point me in the right direction.

  Have him create a id Apple here- create and start using a Apple - Apple Support ID, and then both you can create an album-photo sharing Photo Sharing - Apple Support iCloud

• How to play the next song with the repetition of the same song over and over again

  How to play the next song with the repetition of the same song over and over again.

  

  In this screenshot, shot an Apple article, you can see four icons at the bottom of the screen. Look at the third argument of the right, with the two arrows going in a circle. It's the repeat function. When turned on, you can tap the icon to turn it off.

• Thunderbird is lock on a message and I have to delete the Bellsouth otherwise it will download the same email over and over. How can I fix it?

  It started a couple of weeks. I noticed an email several times being downloaded. After reviewing the many things, I deleted the email on Bellsouth and Thunderbird then downloaded all my emails. Over time, he started doing this several times in a batch of e-mails. The download bar will say it is loading down 1 (or whatever the number) to say 71 messages. It can download 1 or more, then it stops downloading. I go to Bellsouth and remove the last downloaded message and click Get Mail in Thunderbird to start the process again.

  If I don't delete the last email downloaded when I hit Get Mail Thunderbird will download the same email again and stop. A few times it will start a download and work for an extended period and then stop the download without having to download a single mail.

  Before I tried to pull up in protected mode I ran C Cleaner and SpyBot just to see if there was something I picked up somewhere. I've not seen anything unusual, but had two programs clean what they find. Since their execution I've seen Thunderbird download some e-mails twice, but it's the download now. Don't know what that programs cleaned up that seems to fix the problem. So, for the moment, it looks like I agree.

  Thanks Matt. If it comes up again I'll give the protected mode a shot.
  Jim

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• Shuffle all is no longer works, I have to manually advance to the next song or listen to the same song over and over again

  Since the update to iOS 9.3.1 my iphone is more my music mix.  I can type shuffle all, but he played just the same song over and over until I manually advance to the next song.  Any suggestions on how to fix it?

  It's strange because on my iPhone 6 if I hit Shuffle All (at the top - it doesn't matter if my view of my library is on songs, Albums, artists) it certainly mixes between songs and does not play the same song over and over again.

  Just to be sure that we are talking about the same thing-, you tap my music at the bottom of the screen and then click on library above, then press Shuffle All? Because that's what I did and had no problems. Maybe try forced him to leave the music application (double clicking the HOME button, and then drag upward on music app) or even try to do a hard reset of the iPhone (now the HOME and POWER buttons until the Apple logo appears).

• Why did I not buy the same book over and over again for each device?

  I bought a book for iPad on the iTunes app, then when I wanted to read the same book on my iPhone, I had to buy the same book again and then to read on my Mac at home I had to buy the same book again. I thought once I bought a book under my account that I could use it on all my devices, but apparently not the case. This is how it is supposed to work? Having to buy the same book for each device? If this is not the case, how it works and how do I get a refund for the book two, I bought extra?

  When you buy an ibook that it will be free to download on your other devices/computers, as long as the book remains in the store, it's the same version of the book and you don't move the country (and you use the same account that you bought with).

  How were you download on your Mac? Books you can redownload will appear in the purchase link under quick links on the right side of the homepage of iBookstore in iBooks. They should also show in the ibookstore with download instead of a price button.

  You have been charged for the same thing that you initially copy bought (he didn't is not ore just one version of the book in the store?), and that you use the same account? Contact iTunes Support: http://reportaproblem.apple.com

• Why books make me buy the same book over and over again to see on various devices?

  I bought a book online and read on my iPad... I would also like to be able to read this book on my iPhone because it is easier at times... but books made me buy the same book again for now, double the cost for the same book I own, under the same account, just on a different device. This is how it works? What I must again and again get you the book even if I want to read on my different devices?

  Hello there, Kenneth.

  It seems that you are having problems getting purchased content on multiple iOS devices. The following Knowledge Base article provides a good explanation of how iBooks purchases should work:

  On iBooks

  In addition, the following article offers how to get these purchases on other devices:

  Download your latest purchases

  Before you can access a purchase, you must do the following:

  1. Make sure you have the latest versions of the software on your iPhone, iPad or iPod touch and your Mac.
  2. To log in with the Apple ID you used for the original purchase. Use the following steps to see what Apple ID allowing you to download something.
     If you see a message that says: "this device is associated with an another Apple ID." "You cannot link this device to another Apple ID to [number] days," you may need to wait to download your purchases. Learn more about the devices associated.
  3. Check if the purchases you are looking for are hidden. If your purchases are hidden, you can see them not even after following the steps below. Learn how to view purchases.
  4. See if content is available for the redownload. Previously purchased may not be items not available if they are no longer on the iTunes Store. Also, make sure that you are in a country whereyou can redownload points. If you have changed your Apple ID from one country to the other, you cannot download items you purchased in a previous country.

  If you are a member of Apple's music, the items you've saved for use in offline mode do not appear in your purchased item. Learn more about the Apple's music.

  If you use family sharing, you can download the content purchased by other members of your family group.

  {...}

  Re-download a book

  You can re-download books in iBooks on iPhone, iPad, iPod touch, or Mac (using OS X Mavericks or later), or iTunes on a PC.

  On an iPhone, iPad or iPod touch

  1. Open the iBooks app.
     If you use iBooks 3.2 or earlier, click on the store.
  2. TAP purchased from the lower navigation bar.
     
  3. Press the download icon next to the book you want to download. The book is downloaded on your device.

  On a Mac

  1. Open IBooks.
  2. Click on iBooks Store.
  3. If prompted, sign in with your Apple and the password.
  4. Under quick links on the right side of the iBook Store, click purchase.

  
  
• Select No in my view purchased content library that is not on your computer.


• Scroll to find the book you want to download.
• Click on the download icon in the upper right corner of the item you want to download. Downloads of your book in your library.

On a PC

1. Open iTunes.
2. Click Connect and enter your Apple ID and password.
   
3. Click on your name and select purchased in the menu.
   
4. In the upper right corner of the screen, click on books.
5. Click on 'Not in my library' to the purchased display content that is not on your computer.
   
6. Scroll down until you find the item you want to download.
7. Click on the download icon in the upper right corner of the item you want to download. Downloads of your book in your library.

Finally, if you are connected the two devices with the same Apple ID and you need to report a problem with your purchases, this article will help you:

Report a problem with an item purchased from the iTunes Store, App Store, Mac App Store, and iBooks Store

To report a problem or request assistance with a product purchased on the iTunes Store, App Store, Mac App Store, and iBooks Store:

1. Visit reportaproblem.apple.com in your browser.
2. When you are prompted, enter the Apple ID and password used to start the purchase of the item, and then click Sign In.
3. Find the item, you have a problem with, then click on report a problem next to her.
4. The problem choose choose the problem you are experiencing.
5. Follow the instructions on the screen. You may be asked to describe the problem in a text field.
6. Click Submit and we will look at your problem.

If you use the sharing of family and you have a problem with a shared item, ask the family member who had initiated the purchase to report the problem by following the steps above.

Thank you for reaching out to the communities of Apple Support.

Kind regards.

• I teach online and all my classes have the same user name and password. Now that I clicked "remember me next time", I can connect only in one class. How to unlock my password. Carol in English

  I teach online and all my classes have the same user name and password. Now that I clicked "remember me next time", I can connect only in ONE class. How to unlock my login and my password, so that I can use it for all classes. Carol in English

  "Remember Me" for the site connections automatically when you return to the Web site is done with a Cookie the site in Firefox.

  Try to clear your Cookies for this Web site.
  
  Tools > Options-> life privacy - Cookies = the button show Cookies.
  
  You must use the custom settings for history at the top of this tab to see the View the Cookies button.

  Enter the domain name in the top search bar and all Cookies for this URL will be displayed. Unless you can figure out which is Cookie to "remember me", you will need to delete them all.

  Hold the {Ctrl} key while you click each Cookie in the small window. When this list is all highlighted, click the Cookie delete button at the bottom left.
  When you are finished click Close.

• My 5s possible remote jailbroken and hacked so I share the same ID Apple and the person knows my passwords?

  My 5s possible remote jailbroken and hacked so I share the same ID Apple and the person knows my passwords?

  N °

  What makes you think that this could happen? If you share an Apple ID with someone and they know a lot of your passwords, they have access to a lot of your information. Change your passwords.