Pavilion TouchSmart 23 all-in -: computer has stopped working!

Similar Questions

• HP Pavilion dv7-6c52ea all HP software has stopped working...

  Hi recentally purchased my DV7 (in the last two weeks), everything began to work very well and was incredibly fast. Then a week ago I noticed that he began to take a few minuets after loading office before it would work at normal speed. I have it linked to the HP connection manager, because it works run normally after the tab appears in the lower right.

  I decided to try and Manager of open connections, and all that happens is my processor jumps from 2% to ~ 15%, but no charge screen. Stays any computer in this state until I have completed the process in the Task Manager or you restart the computer. Since then, I realized this problem occurs with all HP (especially coolsence) software.

  Any ideas? I thought of all their software to uninstall and reinstall, but it could find on their website. Also, I tried already restotre system to the closest, which did nothing.

  Anyway, tahnks to help in advance,

  Niccy.d

  PS also do not know if this is related, but having a simular problem where the host appilication says catalyst control center has stopped working. Best solution I've found for that is just to remove the CCC, as it doesn't seem to be necessary. Thanks again

  OK, I gave up in the end and used the inbuild factory restore...

  everything seems to work fine now, just lost some of my files, but I can those back. First thing that I'll do this time, is to create a backup disk.

  Thanks for the suggestions, guess we may never know what was wrong

• All USB keyboard has stopped working

  Hello

  All USB keyboards have stopped working on my installation of windows 7. They work fine in the BIOS or on my Ubuntu installation. When I plug a keyboard, it still gives an error code 29 (drivers not found). I tried using two keyboards: a Logitech Gaming Keyboard G105 and a fairly generic wireless keyboard (a dongle to connect to the computer).

  I tried to uninstall it from the Device Manager and plug or restarted again, but the result is the same. Windows Update cannot find driver updates, and a system repair disc doesn't detect any problems. I temporarily created a fresh install of windows 7, which recognizes the keyboards very well. There is no driver available manufacturer (attempt to all keyboards are supposed to use the base drivers), and the keyboard Logitech gaming software does not see that it is there. 'Control Panel-> devices and printers' keyboards of lists of names, but the shows not even the stuff of work that is just under the Device Manager and the problem-solving the tent and is unable to find the drivers again. Try to select the driver HID keyboard in the Device Manager just in fact give the code 10 error (device does not start) instead.
  Nothing I've tried has gotten me anywhere. I would rather not re-install Windows 7, like all the time and effort to get my system how do I like it took me forever, but I can't see how I solve this problem. Any help would be appreciated.
  Thank you
  Zoden

  There is a good chance a "repair" install will fix the problem as a "repair" install should re-create any missing or corrupt driver installation file.

  I don't see anything definitive where observer records but can provide you with the following file, which can provide more specific information:

  C:\Windows\inf\setupapi.dev.log

• All files .exe has stopped working

  Whenever I try to open a program I get the * *.exe has stopped working. This is on firefox, windows media, nero, games player, etc.. The only way for me to open anything it must be run as an administrator will search for virus with spyware doctor™, malicious software with malwarebytes' Anti-malware and registry with Regcure errors. but nothing works any help.

  Here's what werFault.exe said on some programs.

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Hoyle Puzzle Games.exe
  Application version: 0.0.0.0
  Application timestamp: 562b029a
  Fault Module name: StackHash_6bc7
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000005
  Exception offset: 04554e40
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033
  Additional information 1: 6bc7
  More information 2: f3f6a1403802118ada460cd45530935b
  Information additional 3:6477
  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198

  Signature of the problem:
  Problem event name: BEX
  Application name: FreeCell.exe
  Application version: 6.0.6001.18000
  Application timestamp: 47919e59
  Fault Module name: StackHash_6bc7
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 04554e40
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033
  Additional information 1: 6bc7
  More information 2: f3f6a1403802118ada460cd45530935b
  Information additional 3:6477
  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198Problem signature:

  Signature of the problem

  Problem event name: APPCRASH
  Application name: NeroExpress.exe
  Application version: 9.0.9.100
  Application timestamp: 48d36d6b
  Fault Module name: StackHash_6bc7
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000005
  Exception offset: 04554e40
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033
  Additional information 1: 6bc7
  More information 2: f3f6a1403802118ada460cd45530935b
  Information additional 3:6477
  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198

  Exception code: c0000005

  Check please the RAM to find errors. Please download memtest86 + [1] write a new bootable CD (use a CD - RW if possible) of ISO (download and use ImgBurn [2] for this), restart your PC and scan your RAM 4-5 h to find errors.

  André

  [1] http://www.memtest.org/download/4.10/memtest86+-4.10.iso.zip
  [2] http://www.imgburn.com/index.php?act=download
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• All equipment Linksys has stopped working! But having internet with NO LinkSYS equipment

  My setup is eccentric, but worked for a long time. It stopped working Friday. Let me first say there is a reason why I put in this way. The reason for my configuration is based on the location of the different IP and hardware when I bought at the origin of the material (in case your wondering why I am not a different route). All network card/devices and routers are Linksys. The LinkSYS device not only is a Netgear print server and 1 PCI card installed on a 2nd PC.

  Here is my configuration: A modem high speed, a wireless BEFW11S4 (4 port on the router). 1 unused port. Port 2 of a second wired router (for DIRECTV VOD and VUDU future) across the House. Port 3 to a local PC. 4 port wireless router WRT54G on the end of the House (I used one of the ports not the WAN connection). Wireless is enabled for both routers. DHCP is disabled except for router main basement. I treated all the routers beyond basement one as gateways by saying.

  My problem: I have several PCs with wireless cards / devices. That work is 1 XP Dell laptop, as shown below (not Linksys) and the fact wireless and also via a wired connection. Directv is also wired router (2nd line). The Wii also works or wireless router. Of course, my PC to the first router also sees the internet. All locations to see both routers with 80% of signal. My House is small, but limitations of the wiring, it's the best solution to get internet.

  MY PC, given models configurations are Linksys except as indicated:

  1 PC XP w/WUSB54G (USB adapter)

  1 2000 pro w / Netgear WG311 (PCI card) very old PC and sees no internet, what to look for and find two routers with high signal. Internet has worked in the past, though that is not used for a while. I can possibly assume it just does not work or can also be linked to this issue.

  1 Dell XP with internal wireless (works very well!) Will work with a router wireless and communicates also with print server with success.

  1 2000 pro w/WPC11 PCMCIA card

  1 XP with Linksys PCI card (don't have handy model number)

  I also changed the ports of wireline equipment to check that it was not a bad port. I have an internet connection on non-material Linksys. Some of the computers that I use on a daily basis, others not were lit in a time very long. After the problem, I decided to check these computers also. I did not any changes to the configuration. As I said I came home and noticed no internet and went to fix the problem. I used the Linksys software on all of the products listed to configure the network. (Supplied with each equipment original disks) It will show you, we can see the routers, shows NO internet connectivity but appear sees a router, it is not the internet. I want to emphasize that I did not change any installation, it just stopped without warning.

  Initially, I assumed that it may just be the wire to a router. (WRT45G). I have also unplugged all the material, renewed IP, rebooted the PC and modem repowered. What bothers me is that the DELL works fine, including being able to print, the Wii is very well and speaks and I can renew IP and download VOD since the second wired router and receiver DIRECTV. Also, I assumed that maybe it was a problem with a new patch from Microsoft, but some of the PC were not on months, although until this problem. Thank you for taking the time to read this long post. I tried to be as complete as possible. Any suggestions or ideas appreciated. I have found no solution on this forum or on the internet.

  NOTE: I also reinstalled 2 PC software, including returning my WEP. This has not solved problem either. Problem remains the same. I also checked the internet properties and network configs (on the PC) although I can't imagine every PC has changed itself.

  It doesn't seem to be an adapter or your computer problem, from what you described, I guess that your router has some problems of connectivity... You must reset your router and then re - configure both...

  As you explained that a computer for the first router connects to the internet, you can download the firmware of the router first and upgrade... You can download the firmware here

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Similarly, upgrade your second router and update its firmware... I think that after this, you should be able to get the connection on all computers...

• HP Pavilion 500 series: HP support assistant has stopped working on windows 10

  I have redownloaded Assistant HP several times since the installation of windows 10; It works twice, maybe, then he said: stopped working-new HP and nouveau1 assistant what is the problem with that?

  Please advise!

  The first thing you need to do is to completely uninstall HPSA.  Then, use the version appropriate for your computer listed here.

  I suggest to use Revo Uninstaller to remove HPSA.  It will remove the HARD disk as well as all the remains of the BIOS.  I use the FREE version.  The advanced option is best to remove the entire application.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Pavilion 15-p097TX: brightness keys screen has stopped working

  I was able to adjust the brightness of my screen using the f2 + f3 key but all of a sudden they stopped working and I am not able to adjust the brightness of the screen from any place neither sign nor any other option tried some methods but they all failed

  Hello

  Try the following.

  Download the Intel HD graphics installer on the following link and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp68001-68500/sp68117.exe

  Once complete, download and reinstall the Chipset driver from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp73501-74000/sp73543.exe

  Once completed the reinstallation of Chipset, do not restart requested, rather open your download folder, right-click on the Intel graphical installer and select "Run as Administrator" to launch the installation.

  When this is finished, stop the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Start Notepad and let Windows take over completely for a few minutes before checking.

  Kind regards

  DP - K

• My C5280 All-in-one has stopped working, I get one! signal on the front panel, please help.

  My HP Photosmart C5280 All-in-One worked perfectly well and suddenly stopped working, started to blink and all I get is a! sign on the front panel, I use Windows 7 64-bit, please help!

  Hello waldonan,

  The first thing that we should try to do is a power reset on her pinter.

  Reset the printer

  Follow these steps to perform a reset of the product.

• HP Pavilion: Before port USB on HP desktop computer has stopped working

  My HP desktop computer is about 2 years old and has two USB ports on the front and a number on the back. I had no problem with any of the ports until I used a USB in the port now broken and caused a power outage that now this port doesn't recognize any USB device.  It says "USB device not recognized.  The last USB device you connected to this computer worked badly and Windows does not recognize. »

  I tried to uninstall and reinstall the USB ports on the Device Manager and have lived all the suggestions on the HP support site and the Microsoft support site. The defective USB key must have caused damage to the track. I hope you can suggest something that I can do to get it working again.

  Hello

  The only port on the front is damaged. The USB key must have damaged only this USB port. I'd like to reuse this memory bar.

  You need to replace the USB module, two ports USB 3.0 of housing as the two front ports use the same module and connections to the motherboard.

  You will probably need to go to HP for the part.

  You should be able to get access to the component by removing the front bezel. Remove the side panel also. You should see the connection of the cable and add him the USB 3.0 connector front on the motherboard.

  Jay

• HP Pavilion 17 Notebook PC - Synaptics Clickpad has stopped working

  Hello

  I got my HP laptop for a little over a month now, a week ago, my Windows 8 made a update, I rebooted my computer and all of a sudden my Synaptics Clickpad stop job.

  I literally tried everything to solve this problem. I went through my laptop settings and my clickpad is not to see the like shut off, I disabled and allows him to make sure. I ended up finding a new driver Synaptics by HP.com, I installed it and my clickpad started working again. I restarted my computer and was able to use my clickpad on the login screen, but once that I logged it disappeared again. I tried to go through all the possible settings and there is nothing that solved my problem.

  Some help would be appreciated, it's very disappointing because I've only had this laptop for a month and having to return it would be even more disappointing.

  My laptop is a:

  HP Pavilion 17-f084ca Notebook PC (ENERGY STAR)

  8.1 Windows 64-bit

  Product number: G6R4OUA #ABL

  Before the problem occurred: Windows 8 through Windows Update update

  Problem post: driver Synaptics updated through HP.com, scanned troubleshooting my computer through HP.com and check many areas. Nothing has solved the problem.

  Hi @DawnK ,

  Thank you for visiting the Forums HP's Support and welcome. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link for the number of support in your region. They will be happy to help you immediately.

  Thank you.

• 411 wants 110 all-in-in-one: Envy 110 411 a all-in-one has stopped working

  I want to 110 411 a all-in-one. I use the scan function - I don't use it to print or copy. I got it for a few years with no problems.

  Yesterday, when I went to scan a document as usual, he does not work and I had an error on a «transport jam» At the same time, the front where we load open paper sheets and the small arm (or what you call) that one up the paper also balanced out and remained outside. I don't know why that would happen, since I chose Scan and not print or copy them.

  I watched the online instructions and video for a carriage jam troubleshooting and followed the instructions, but transportation seems to be OK and there is no jam. No instructions troubleshooting that I saw mentioned the part about the lifting of the front and the arms of Briefcase to come. So, even if the error message says something about jam of transport, which doesn't seem to not be the problem.

  At this point, I followed the complete sequence of the steps in troubleshooting many times and they have not helped. In fact, I got a message saying that the device will be shut down to avoid damage. Help, please! I don't want to buy a new scanner right now!

  Dianne

  Hi @Dipena,

  Thank you for answering my questions!

  Please double check, that all steps have been taken in the following guides:

  1. Displays a Message ' Transport Jam '.
  2. A message "Paper jam".

  If the guides above are complete and has not solved your problem. Please contact HPtelephone support for further assistance. Repair printer / or replaced. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."

• Computer has stopped working properly after a Norton updated.

  Yesterday, my computer did a update of Norton, and since then I can't use my computer.  I double click on an icon & it just "chew" and does nothing.   Then I try & press "CTRL/ALT/DELETE" to stop this & nothing happens.  Or, other times I double click on an icon and nothing happens.   Rebooted the computer several times & still nothing.  I have Windows XP.  I want to just bring the computer back to 2 days ago & everything goes back to how it was.

  What Norton product and version do you use?

  You can try the system restore to go back a few days. But first you need to disable the product Tamper Protection Norton.

  See:

  http://support.Microsoft.com/kb/306084

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

• The sound on my computer has stopped working. I went into sounds to check and it seems fine. People can hear me when I'm on the video but I can't hear them.

  cannot get sound on my computer

  Hello Ancon,

  Thank you for your message.  Which application you use during your video chat?  Most likely, it is a wrong parameters, either on your end or the other person's computer.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player 11 has STOPPED WORKING... XP AND Vista problems

  I have a home network with computers XP and Vista.   Computer XP is Dell Dimension 4600.  Vista computer is HP Pavilion Slimline.

  On or about 6/10, WMP 11 on the Vista computer has stopped working properly.  Video will not play digital video (mpeg format), previously working but playing the audio from the file and the timer updates the video plays.

  Attempt to update the codecs (K-Lite).  Didn't help... now, the native multimedia player K-Lite is the same way.

  Deleting updates 6/10 and later versions.  No change.

  System restore of flowing it at 6/9, 6/5, 6/4.  Restoration is back with "unexpected error".  The logs show a NTFS corrupted and suggested chkdsk run.  Filled with chkdsk c: /R with NO ERRORS.

  Ran SFC/scannow on Vista machine.  He said "no violation of integrity.

  Today (6/14), WMP 11 on XP machine has stopped working.  Videos will be running, but are extremely hectic, like something, it's stealing time CPU; However, the system idle process is higher than 90%.

  What the hell is happening?

  EDIT TO add: I want to stress something else... Movie Maker on both machines still work.  Videos can be imported into and read correctly.

  I had things market... Finally.

  I have none of the above.  I do not have the installation diskettes (OEM on a computer HP... no disks provided with the machine, have only the recovery disks that I made when I configured the system).

  So until I went looking for a set of discs that I use, I did the following... and I * think * I know I could fix it, but I do not know...

  I have re installed the K-Lite codec pack... only of video codecs.  I essentially took the video installation by default EXCEPT... I turned off video acceleration.  Intel Express Chipset not allow me to disable hardware acceleration by using its own GUI and Windows Vista would not touch parameters of acceleration as Intel ordered to them.  Well, I suppose that K-Lite has been able to do what could not do Windows and Intel wouldn't let me do.

  Don't know if that was the fix or not, but everything works now.

• Windows Explorer has stopped working error

  Yesterday, I tried to install a program on my computer that is running windows vista after that the computer has stopped working.  It starts go to the home screen and then the screen turns black with a white cursor you can move.  I can start the Task Manager and the cmd mode.  I can boot into safe mode only until I get the message windows explore has stopped working a problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I tried to boot to the last known good configuration, but that did not work.  I think that the program has put the memory on the Board, but I'm still not a person of intermediate knowledge on this topic.  We didn't backup our files and of course need them.  Thank you

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner