Pavillion G6 - error recovery disks

Similar Questions

• Error of w3 Acer after the partitioning of c: drive, error, "recovery disk starting with the help of the legacy bios"

  I want to do partition in acer w3 to make second and third disc... After a partition on the c: drive, I can't start windows. It is blue screen and restart, screen, reboot, blue and continue like that.

  I have the recovery disk.  It can start on a recovery disk. but when I choose the option system restore of operating or completely restore computer to factory settings.

  "He said,"Please THIS RECOVERY DISC using LEGACY BIOS BOOT MODE "

   

  When I pressed win key + power: a required devece is not connected or is not accessible
  

  0xc0000225 error code
  

  You must use the tools of recovery on your installation media.
  

   

   

  I try to reinstall using win 8.1 flashdisk dvd or usb, but acer w3 cannot start on it / acknowledges.
  

   

  My bios setting:
  

  v1.07
  

  active F12 boot menu
  

  D2D recovery active
  

  FTPM active support
  

  start the order of priority: 1 cdrom usb 2. hard drive USB 3. Windows Boot Manager
  

   

  can anyone help?
  

   

  I can start to win 8 installation usb flashdisk

  I use rufus software to create bootable win8. in the parameter use: GPT partition for computer uefi, fat32, 16 KB

  If I repair windows, I'll let you know

• Toshiba Satellite A135 laptop: 0xc000000f - Windows Vista Boot error - > recovery disk does not work, can't get the PC to boot.

  I have read all the info out there and tried many things including using the provided by Toshiba, Vista recovery disks

  I can't go down the screen of boot error, although no matter what I try.

  Is my drive into two partitions, and I am ready to sacrifice one of them if necessary to get the computer to boot.

  Is there a way I can enter directly into the computer and reinstall windows?

  I'm not a pro, then simple instructions are the best.

  THX

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. What are the troubleshooting steps you tried to solve the problem?

  3. the problem occurs in safe mode?

  4. don't you try to do the Startup Repair?

  I suggest you try the steps from the link below and check if it helps.

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows: http://support.microsoft.com/kb/927392

  Hope this information is useful.

• Impossible to restore or recover a Pavillion dm4 with recovery disks.

  I did a complete diagnosis of the hardware test and all the tests.

  I can't access the recovery via the main menu, since I get a BSOD.

  I ordered HP recovery disks and received them yesterday.   Tried to install unsuccessful recovery disks.

  I called iguru in India and they crossed me to see if I could get these discs to work.  No luck.  At every turn, I keep getting the BSOD.  They referred me to the HP support.

  Support HP told me wish either the warranty (warranty expired a month ago) or send it inside for repairs at $250-300.  I don't have that kind of money laying around.

  Question: Is there something I'm missing?

  Pavilion dm4

  Model # dm4-1065dx

  Windows 7 64-bit operating system.

  Hello

  I would try completely wipe the hard drive first and then reinstalling the operating system.

  Download and install Killdisk on the link below - (this application will write zeros to the entire disk).

  http://Software.LSoft.net/KillDiskSuiteFree-Setup.exe

  Download and install ImgBurn on the link below.

  http://download.CNET.com/ImgBurn/3000-2646_4-10847481.html

  Access the application of disc kill you have installed in all programs, open the main folder, then select Bootable Disk creators, then the BACK Bootable CD Creator that will burn the ISO on a blank CD bootable.

  During the following process do not worry about all warnings as your recovery DVDs will reformat the HARD drive.

  Insert this CD into your PC which is unable to load the operating system properly. Close Notepad, and then start again to boot from the CD of Killdisk and follow the instructions on the screen to kill disk.

  A brief description of the process here is Killdisk.

  Use it to wipe the entire hard disk, highlight (80 h) and press f10 (you will also find Hague to enter a confirmation and press enter) - ( This will make sure to include all of the partitions , and then start the process - this may take a few hours!).

  When the process is complete, remove the CD from Killdisk, insert your first HP recovery disk and then hold the power button until the laptop turns off then restart the laptop to try the installation again.

  Kind regards

  DP - K

• Satellite L500-12F - error creating Toshiba Recovery disk

  Hello. New user on the forum and the new owner of a Toshiba.

  I am trying to create the 4 recovery disc for my Toshiba satellite L500-12th. Disks 1, 2 & 4 created with success, but 3 disk failed twice. The message I received was on the screen: cannot read the following file: F:backslash ZZImg backslash 09753xsp6.swm error Code: 020150-20-00000000
  (I can't type a backslash in this window of the computer)

  Anyone know of a solution or a similar problem?

  Dwight

  Hi Dwight,.

  The disks that you use to create the Toshiba Recovery disk?

  I have a good experience with Verbatim DVD-R. Have you tried these discs?

• Satellite L30 recovery disk failed: could not do language input error

  I have a L30-101, which has been slow to turn on. Another forum suggested going in ms config to ensure the maximum memory used to initialize and uncheck that some elements to start. When I rebooted, windows icons have been expanded and slightly blurry, so I undid the changes I did but windows is still not clear. The laptop works well otherwise, so I recorded that restore data, I needed and tried a system, but the computer can't find any restore points.

  As a last resort, I tried the Toshiba product recovery disk which I had never used it before. He begins to read it ok, then asks for the choice of the English language. About 10 minutes later it stops with the error message "could not get a writing of the language of the INI file! Article: [Commom] key InstallCMD file D:\Setenv.ini.
  When I hit OK to clear the message the Administrator page says could not initialize the raid class no RAID-continue normally.

  When I restart the laptop it brings back me to my previous state with blurry icons, another way to work laptop and all my old data is still there.

  I have since bought a new portable Satellite L450D that I write this, but I'm eager to try to lift my L30 and working again as a spare. I contacted Toshiba UK in case there was a problem with the recovery disk, but due to licensing issues they can only redirect me to the support of EU toshiba backup site to buy a new recovery disk. As I already have a recovery disk, I don't want to buy another for the same results. Does anyone have ideas on how I could get the recovery disk to load entirely and recover my laptop to its factory settings?

  At first, I must say that you should back up all your important data to an external device like external HD or USB. When you use the recovery facilities disc all the partition is deleted.

  I don't know why you cannot use livery recovery disk, but the only thing to do is to visit nearest Toshiba authorized maintainer and show the problem. If they can confirm recovery DVD is defective, I assume that you will get a new free of charge.

• Error when reinstalling windows from recovery disks

  My laptop crashed and could not find Windows, so I ordered a recovery disk (TR-IM00209299 - Win7 64 bit HomePremium (NH) SP1) through Toshiba recovery media shop. Now that I got the Windows 7 recovery discs, but they do not install successfully, and I'm not clear if there is an error on the discs I received or a problem with the hardware. Here are the details of the error. Is it a mistake that some of you know? Please notify

  Unpack the system/Windows re...
  L ' ImageX for Windows tool
  Copyright Microsoft Corp. All rights reserved.
  Version6.1.7600.16385

  Error opening file V:\HDDRecovery\SWImg\15583XSP.swm
  These data are incorrect.

  ERROR: ImageX could not apply system/WinRE V:\HDDRecovery\SWImg\15583XSP.swm index 1 of the HARD drive to W:!
  Press any key to continue

  Are you able to boot from other bootable disks?
  If so, then it means that your hardware (optical disc ODD) should be ok and the problem is associated with disc.

  Contact the reseller of disc (Arvato?) and ask again drive

• Creation of recovery disks ends with the error message

  I tried to create a recovery disc but got this message "cannot read the following D:\06491XP file. Water hydraulics Error Code: 020150-20-00000000 "at half way through the first DVD disck.

  That means and what I can do to create a recovery disk?

  Thanks for your help

  Hello

  You have linked to burn using TDK or Verbatim DVD-R? You see, some media only good acceptt cd/DVD burn :)

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• Satellite L300 - error recovery disc creator - disk is scratced or dirty

  Hi all

  I tried to create recovery disks for my L300, but after a 1-2 minutes, the program stops and says: 'Please check if the disc is scratced or dirty, if so, try again with a new disc' error code 0E01B5-26-2A030C00.

  I tried this many times with many different DVD in recent weeks, but this continues to be!

  The machine is old just a few weeks and run Vista family premium advice please as Im stuck.

  Thanks for reading.

  Hi mate

  I think that you have used are simply not fully compatible disks and supported.
  In my case I couldn't t create the recovery because the CD/DVD drive was not able to manage it.

  Is that many CD & DVD discs supports properties and different standards and in many cases, CD/DVD players have a lot of difficulties to manage different disks.
  I think you should just test some DVD-R discs.

  I use DVD-R and was able to create the recovery disk.

• Satellite Pro L300 PSLB1A: Recovery disk doesn't work no-error 0xc000000f

  I get error 0xc000000f on restart and if I try the recovery disk I get error error: 10-FC12-0241
  operating system is vista professional and toshiba laptop L300 PSLB1A - 02S 008

  Hello

  You mean that you cannot start the laptop using the Toshiba Recovery disk you created?

  Go into the BIOS and check if the CD/DVD drive is recognized. It should appear on the first page of the BIOS.
  If the CD/DVD drive is not listed, then you should set the compatible SATA mode and must save the changes.
  After this attempt to boot again from the recovery disc.

  I also searched on the Toshiba driver European page for info and found a few details;

  There is an update of firmware for CD/DVD TS-L633A and TS-L633P player.
  This Firmware solves "sometimes not able to writing on DVD + R media'.
  The problem occurs only on DVD + R media, other media type have no problem.

• SATELLITE A30 ERROR! AFTER THE INSTALLATION OF RECOVERY DISKS

  INSTALLED BOTH DISKS AS MANUAL... GET THE ERROR MESSAGE... AT THE END OF DISC 2. CAN FIND NO WAY OUT OR FOLLOWING THE INSTALLATION... REMOVED DISC SEVERAL TIMES AND BEGAN THE PROCEEDINGS WITH THE SAME RESULT. NO ERROR; MESSAGE 437... ; CANNOT READ THE FILE... LOADS OF OTHER WRITTEN IS ALSO ON THE SCREEN... I THEN PRESS ESCAPE; AND HE LOOKS LIKE HE NEEDS A CASE NUMBER? NOW I REMOVE THE DISC; I CANNOT START THE SAME PROCEDURE TO NEW NOTHING WORKS ON PC...
  DISKS CAME WITH THE PC AND I'VE USED THEM TWICE MORE EASILY
  LAPTOP CODE A30 (PSA30E) 14 OLD WORK OK SOMETIMES SAID HE WOULD HAVE TO CLOSE BECAUSE THE GENERIC HOST HAD ENCOUNTERED A PROBLEM... RECOVERY DISKS ARE NOT SCRATCHED CAN ANYONE HELP?

  Hello

  upgrade your laptop with a special as material upgrading of RAM or else!
  It may be that an upgrade of hardware are problems when you use the recovery of th disc!

  Alternatively, you can try to reset the default BIOS settings.

  Sammy Bye

• Satellite Pro A300-1 has 8 error received trying to create Recovery Disk 2

  I just got my new laptop A300-1 has 8 today and as recommended in the manual I tried to create the Vista recovery disks using the recovery disk pre-installed program. I created the 1 disc successfully, but when I tried to create the disc 2, it worked a little, and then I got an error:-

  File not found: -.

  F:\06477XSP5. STORMWATER MANAGEMENT

  Error code: -.

  020150 20-00000000

  Any help to solve, such as Iif I can't create the disc, it looks like I might have to return it...

  My apologies if this has been previously answered, quite new to all this.

  Thank you very much.

  Are you trying to use DVD-R virgins?

• Satellite L300 - error if I try to create a recovery disk

  I was trying to create recovery disks for my new L300, but after a few minutes, the program stops and receive Error Messages (boot.wim is not). Yet once, I tried to create through other DVDs of brand as Philips DVD - R, Imation DVD - R, Sony DVD + r etc.
  Can you please help with that?

  I can't find the Verbatim and TDK DVD in our market closest to try these marks too.

  Hello!

  I have a Satellite L300 too and didn t have problems to create the Toshiba recovery disc. I used DVD - R Verbatim media and usually got the best experience with the manufacture of DVD and DVD - R types.

  In your case, I would try this DVD media or the TDK DVD-R discs. If you can find t he on the store closest to the computer you can also order it online. Take a look on Amazon or eBay, here, you can order these media.
  It s worth a try! ;)

  Good bye

• My recovery disk multimedia creation error

  I have a new Toshiba Satellite C675. I am trying to create my recovery disks.

  He says that I need for this 6-disc but Disc 1 won't end up creating, I keep getting an error that says... Cannot read the next file. D:\ZZImages\ZZImages\PREINST4. Stormwater management (error Code: 020150-20-00000000)... Anyone have any idea what this means and how I can fix this?

  E-mail: [[email protected]]

  Thank you... Angela

  Hello Angela

  In the past I ve created recovery for many models of different laptops, but I've never seen this error message.

  Can you please tell us what blank media are you using?
  My experience is that the use of DVD-R media only works perfectly, especially if you use well-known brands like TDK or Verbatim.

  In any case, please check what people wrote on the forum we Toshiba. Maybe this will help you - http://forums.toshiba.com/t5/System-Recovery-and-Recovery/Error-creating-recovery-DVD-s-on-Satellite-L505D-ES5025/td-p/108013
  Please send comments.