Photosmart 5510

Similar Questions

• HP photosmart 5510 won't print black

  I have a photosmart 5510 which do not print black. All other colors are OK. Have changed cartridge and went through all the steps on the site of diagnosis without success.

  I really need to turn it on. Any ideas gratefully received.

  See you soon.

  Here is a link that can help you with this problem. It can a be a print head.
  http://goo.GL/OTmPV

• Photosmart 5510: customer paper size

  Hello world

  I have never posted on a forum before, but I'm about to have a magma down! I try to print my wedding invitation. they are a custom size of 19.7x13.9 cm., I tried to add the custom paper size by following the instructions on the other posts, but this has not worked. paper/output is missing from the advanced settings.

  help would be greatly appreciated because I alsways bought of HP printers, but if I have to buy a new one for that I won't buy HP I'm worried sick have the same problem.

  Thanks in advance

  Hi @lilrhi,

  Welcome to the HP Forums!

  I see you are trying to print on paper 19.7 x 13.9 cm with your printer HP Photosmart 5510, on Windows 7. And I'm happy to help you!

  According to the specifications of the printer, it is not a supported paper size. The paper sizes supported for this printer are:

  Type of paper

• Photosmart 5510: Out of warranty 5510 won't print black

  My Photosmart 5510 off-warranty will not be printed in black and color blocks on the test page are weak and upholstered.  I have responded to customer cleaning tips with no improvement.  Not enough messages about the problem detail advise to proceed.  What to do next?

  Greetings @HLDLC,

• HP Photosmart 5510 'Printer offline' show

  To the right,.
  
  I started having a problem with my HP Photosmart 5510 - running on a Mac OS x 10.6.8 computer wirelessy.
  
  Until yesterday, I was able to print wireless towards her, even when he was asleep he wakes up and print.
  
  Now, however, I get a "Printer offline" message whenever I try to print what he's awake or not and I have to turn on the printer and on again before it prints.
  
  My printer HP utility can see the printer and it is connected to my network.
  
  Any help would be appreciated,
  Thank you
  Ronan

  I found this on the Apache site:

  "You unexpectedly see an Apache HTTP Server installation page when you visit a Web site. If you sent us mail because you have seen a page saying "it worked!" (or something similar indicating that Apache has been installed) on your screen or a Web site you have visited, please go back and READ the page. It must also specify what happens. The page is the equivalent of a demo or the Readme file from a Windows installation of the application; It is intended for the person who has installed the software and is supposed to show that the installation has been completed successfully. The problem you are experiencing has nothing to do with us, and we cannot help you. You must contact the webmaster of the site. If the site is www.foo.com, for example, try to send mail to . If it is www.toddsbeer.org, send an email to . And so on. »

  I think that there is something funny, with (probably your DNS of ISP) your router's DNS settings.  You can enter the configuration of the router and change the google DNS or OpenDNS DNS?

• HP photosmart 5510: hp photosmart 5510

  I have trouble scanning photosmart 5510 on my PC since I installed windows 10: there is no problem with the software, but pinter them cannot see the PC

  Hello

  try to install the most recent to win 10 S/w

  http://ftp.HP.com/pub/softlib/software12/COL39102/MP-108875-4/PS5510_1315-1.exe

• This issue is still pending. My PhotoSmart 5510 continues to go offline during the generation of printed documents.

  I have a PhotoSmart 5510 and a Toshiba i7 Quad 4 laptop running Windows7 with a Trendnet Wireless router.

  My PhotoSmart 5510 disconnects when printing is generated.    All systems are go: online wirelessly connected wireless, does not not offline, set as the default printer, checkmark, etc..  Sometimes it will make an impression and disconnect and sometimes it will disconnect the first time and will not be printed.

  If I run the diagnostic utility I can usually get it online.  But the said diagnostic utility it is disconnected and the problem is not "resolved".

  It also has a problem with the USB.  If I've set up as a USB printer will crash the entire operating system and laptop computer will not restart unless the USB is disconnected or if the printer is turned off.  This does not happen with my laptop computer on the same Lexmark printer.

  obewan,

  This article should help to keep the Wi - Fi connection (including things like setting a static IP address for your printer to avoid the crash between you OS/router/printer):
  http://support.HP.com/us-en/document/c02817031

  Give the steps described a try and tell us if it helps.

  Good luck!

• Photosmart 5510 - wireless Mac - printer offline

  Hi there, I am trying to print from a Mac again photosmart 5510, wireless is connected, tested printing via an ipad - runs like a dream.  Unable to print message error "printer is off-line" laptop (Mac 10.7.2), the printer is not connected.  Printed with a cable but I can't via wifi. Have checked all troubleshooting tips, no luck.  advice is appreciated

  Download and install this: http://support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• an I can cushion of wireless photosmart 5510?

  can I an I Pad wireless connection with photosmart 5510?

  No, you cannot connect to this printer (or the most current HP printers) directly on an iPad without a wireless router.

  If the router is n it is backwards compatible to g.  If it is g, well, then this is g.

• Photosmart 5510: photosmart 5510 doesn't scan

  My Photosmart 5510 left scanning for computer (HP Pavilion with wireless connection). I get a msg of unsuccessful scan from the printer and an HP 5510d series is not found msg on my computer.  He still won't print.     I restarted everything.   When I opened the printer from start I get a box Priinter configuration and software with connect a new printer and add more software options.   A ran the full feature software and driver and get msg that I need to insert the disc and the earlier version cannot be deleted.   Ran print and scan doctor and it says Installer get full software not installed.  I don't know what else to try.

  Hi @dmorfy,

  There is a utility called Microsoft mount it that might be able to help to uninstall the old version of the HP Photosmart from your PC software. It is pretty Strait before running.

  Once it's done try to reinstall the software.

  Please let me know how it goes.

  Thank you!

• without the Photosmart 5510 ink cartridges Control Panel cannot be accessed

  I have a Photosmart 5510 which has no ink cartridge. My intention is to use it to scan only, and I would like to be able to set up wireless. When I turn on the printer, the control panel displays this: "problem of ink cartridges.  One or more cartridges appear to be missing or damaged. Install or replace the affected cartridges. »

  The wireless button or the ePrint button cause anything to appear on the control panel and there is no other options, such as cancel or continue.

  Is there a way to go beyond this message of ink cartridges without installing cartridges?

  Hello

  In general, I'm afraid the answer is no, as a multifunction device, it requires the ink required to operate the device but there are of the workarounds you can try.

  That there is a problem with one or more of the ink cartridges should be sorted first, the control panel will not answer while the device is in an error state.

  You try to use the computer temporarily plugging in a USB port on the printer.

  If the printer is recognized by the PC in such a State, let it finish its configuration and open the software HP Photosmart 5510.

  Open the utilities tab and click on Setup & software printer, then click on convert USB to wireless and follow the steps on your PC.

  If this success then run a scan of your PC use.

  If it is not detected, which is likely to be affected by the error status of the device, such you will solve the problem first.

  You can follow these steps to solve a problem of cartridge if necessary:

  http://support.HP.com/us-en/document/c02924284

  Kind regards

  Shlomi

• hp photosmart 5510 series: photosmart hp 5510 series files are not found

  Hello

  I use the Hp Photosmart 5510 series printer and is faced with a problem where I can not scan from the printer to the laptop. Before having this problem, I used to scan from the printer wireless without any problems, but after I changed my Internet brand and speed, the printer keeps saying "to ensure that the printer software is installed on your computer and this 'scan to computer' is activated via the printer software" even if I have already connected the printer again internet. I have the printer software on my laptop, but it does not work. When I try to click on scan of the computer, the computer used to say "files series hp photosmart 5510 are not found". I tried to change the IP address, but that didn't work either. So I don't know what to do now. Also, I tried to use the USB cable and it worked, who showed me on the printer, I can scan wirelessly or via USB. When I tried with the USB key attached to the laptop, wireless the wireless worked (as well as the USB port), but when I took off the USB cable, it did not work. Help, please

  Note:-J' formatted the laptop and operating system went from vista (original) to the Ultimate, which helped to improve the performance of the laptop. -What is has everything about the problem?

  Welcome to the HP community @Blizzerd,

  I wanted to answer your question to have the printer connect and work on your network wireless 'new '. I think that if you uninstall the printer and reinstall the printer software and continue through to set up the printer on your network, it should work for you.

  Here are the steps for you.

  1 uninstall the printer software, and then restart your PC.

  2. click on this link, select Windows 7 and follow all the steps to install and reconnect the printer: HP Photosmart 5510 and 7510 printers - setting upwards to a wireless network

  Test print and scan and let me know what happens! I hope that does the trick

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!

• Cannot find download for photosmart 5510 for mac mini

  try to add the new printer to mac. Can't download the installer?

  Download and install the full feature software below:

  The printer taken supported by Mac OS X 10.5 or higher - you can find the version listed by clicking the Apple icon, then click on about this Mac.

  http://FTP.HP.com/pub/softlib/software12/COL39428/MP-96135-2/Photosmart-5510-series_v12.14.0.dmg

• Photosmart 5510: Brick of power inside the camera moves around

  This support site is just terrible first, been trying to support by email for almost an hour and just because I'm not at home I can't contact anyone because I have no serial number... not cool at all!

  I have a photosmart 5510, I noticed when I plug in the power cord to the rear of the machine, I can feel the brick of power inside move around, in fact, it is totally not installed in place, I never heard a brick power did this before it is inside an electronic device, the thing must be screwed or something.  I wanted to know if it was normal for this machine, or there's something wrong with my machine.

  It works fine, no problem.

  Thank you

  It is normal, because the power inside the Photosmart brick could be removed, in which case the power brick fails.

  • 

  Figure 1. The back of the Photosmart camera.

  Which look just above the power connector, there is a small screw or bolt. When you use a screwdriver then is posible to remove that cover and find the power brick.

  • 

  Figure 2.  How to turn the screwdriver to open the power module.

  Attention: If you want to do this, please first POWER OFF and REMOVE the CABLES from the rear of the Photosmart camera.

  But it is normal that brick inside power moves a bit.

  Hope this information helps you

  * Click the stars KUDOS to say thanks

  * also click on the Solution button if your question is answered.

• Server connection error:-1 there is a problem connecting to the server... hp photosmart 5510

  HP photosmart 5510 e - while a printer B111a

  Windows vista 32-bit

  connection error message-Server error:-1 there was a problem connecting to the server, press Retry or ok to continue

  No changes have been made to my operating system

  Try to add new applications with eprint center of my Compaq Presario CQ60 laptop to my HP printer. Computer tells me that the new applications are there and ready to use, but printer says 'server connection error "? I followed all the instructions to connect to the wireless router, but I'm not sure how to connect to the "Server"?

  The steps below a usually resolve the problem you are experiencing:

  1. unplug the power cord at the back of the printer.

  2. unplug the power cord at the back of your router (and the modem, if they are separated from the router).

  3. wait 20 seconds, then plug the router (and the modem, if necessary) in.

  4. wait for 30 seconds, then plug the printer back and power.

  5. press the button on the front of the printer ePrint, and it should try to connect to Web Services again.

  These steps usually fix the problem, but if it persists, you can try definition of network information static for the printer (which is sometimes useful to stabilize the ability of the printer to get outside of your network to the internet):

  1. tap the wireless at the top of the screen of the printer and note the IP address.
   
  2. Enter the IP address in the address bar of a web browser on a computer and press on enter or click the go button browser.
   
  3. the printer status page must be open.  Click network in the upper part.
   
  4. click on networking on the left.
   
  5. Select the Proxy settings.
  Note: If you are prompted for a redirect, click OK.  If you receive a certificate warning, select the option that allows you to continue anyway.
  If you receive an internal system error, refresh the page until it loads the proxy settings.
   
  6. check that all fields are empty.  If they are not, make them disappear and make sure that the Proxy Server requires authentication is unchecked and click on apply.  You should get a success message.
   
  7. click on the network address (IP) on the left.
  Note: If you only configuring IP address and DNS address with a yellow note Configuration, refresh the page until it loads completely.
   
  8. leave automatic IP IP address Configuration.
   
  9 change the DNS address to the manual DNS Server Configuration.
   
  10. enter manual for the manual preferred DNS Server 8.8.8.8 and 8.8.4.4 for auxiliary DNS.
   
  11. click Apply and you should get a success message.
   
  12. turn off the printer for 30 seconds and then turn it on again to force the new settings take effect.

  Let me know if you have any additional questions. Thank you!

• Photosmart 5510 requires the color cartridge to print in black

  I have an Imac running MAC OS X 10.7.5 and a HP Photosmart 5510.

  I can't select a black and white printing other than "regular, fast rough, black and white paper.

  QUESTION: Why are there no "plain paper, best option, black and white"? Or should I ask, where is the ordinary paper, the best black and whitee option?

  Surely each printer must be able to print the last option.

  To satisfy my need for a good level of black and white print that I have to use the color cartridges - it is expensive.

  I would be grateful for any help.

  Thank you.

  To print graphics or the text of quality 'Best' the printer uses color ink.  In the case of text, the color ink is printed black to improve the darkness and roughness of the edge.  (Color ink makes printing 'together' more quickly, reducing the purge on the edges).

  For graphics, the printer uses drops color printing black or gray printing mode best because it gives much better graphics.  The color ink droplets are much smaller than the black.  When the color ink is used for printing in grayscale or B & W graphics, the results are much thinner that the result would be in black ink only.

  If the quality does not matter (much) draft mode provides the best economy, but for a better print quality, color ink is necessary.