Photosmart 6510 fine print until the replacement of the black print cartridge

Similar Questions

• replace the black ink cartridge, but I cannot print anything. Could not load the publication SmartWeb w/o say

  After replacing the black ink cartridge, I cannot print and the printer does not recognize my action. I had a printer who worked three days ago and now with the diagnoses, I wonder to load Smartweb print disc which I did not.

  Can I get a support phone number to get this problem resolved?

  Here's how to contact HP technical support: www.hp.com/go/totalcare (click on printers & monitors, there is a phone number on the resulting page).

• DeskJet 932C, you can print with just replace the black ink cartridge?

  My question is basically simple.  The printer DeskJet 932C can operate with only black ink?  Color ink was empty for a while now, but the printer kept working, printing in black and white.  Due to the cost of the ink and the absence of any income available, we just changed the black ink cartridge.  The problem now is that the printer will not print not even black and white.  Do I have to scrape some funds to replace the color ink cartridge, or y at - it another way to get the printer working with just the new black cartridge?

  Thank you in advance!

  Michael Sponable

  Hello

  Your printer can print in black only, but up to a certain point , you need tri-cartouche color otherwise it will not print. It's a little late now, otherwise if you only need to print B & W, a monochrome laser printer is very good and much cheaper to run (in terms of cost per page).

  Kind regards.

• HP Deskjet 1000 J110: Intense black print with the black ink cartridge only

  Hello

  I am trying to print the darkest possible black, but simply by using the black ink cartridge. How do I get there?

  My printer is HP deskjet 1000 J110 using cartridge HP 301.

  I do my drawing in Adobe Illustrator and set the color to be CMYK 100 100 100 100.

  If I insert only the black cartridge, the printer will leave empty place where color CMY ink should be or it will fill the space with black ink?

  Basically, what I'm trying to do is to increase the density of ink to the highest possible but only using only the black cartridge.

  Thank you.

  Welcome @didididot,

  Thanks to their participation in Forums of HP! I see by your post that you would like to be able to print in the black as dark as possible. I can help you.

  You can use the mode single-cartridge:

  Use single-cartridge in the HP printer with a single cartridge. Mode single-cartridge begins when an ink cartridge is removed from the distribution of the print cartridge. In the mode single-cartridge, the product can only printing from the computer.

  Source: HP Deskjet 1000 J110 series.

  Here is a document for printing with black ink only (Windows).

  If you use a Mac, let me know.
   
  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!

• HP Photosmart 6510 series connects to the network and Internet, but not the computer.

  Hey all,.

  I have a desktop H8-1228 and 6510 e - printer.  I got both products at the same time.  I did the initial installation, and everything worked perfectly.  I was able to print of my HP Touchpad (the printer was on the floor and my Touchpad was down.).  Recently, I made a trip for two weeks.  I turned off the printer.  This seems to have been a mistake.  Now, he will only contact my network and Internet, but not the computer.  The Setup program keeps telling me that it is 'Impossible to find the printer' and that he wants me to check the IP address of the printer.  I did this many times by printing the HP's Configuration Page from the printer screen.  I also used Windows "Add a printer" without success.

  I have installed and uninstalled the software several times; every time that remove the icon of the printer and the Standard TCP/IP port in the "Devices and printers" section in Control Panel.  A few minutes earlier, I used Regedit to delete any reference to the series of HP Photosmart 6510 in the registry, believing that it could help my situation.  There can be no. :-(  I did the installation with the same problems that I had all the other times that I tried to install it.

  No help from you the printer experts will be greatly appreciated.  I'm not a novice as you can see.  This situation, however, launched my posterior. :-))

  Hi old_geekster,

  You may want to enable disable all startup programs in msconfig until you are able to access the Web integrated printer server. It seems that there is something in the communication with the printer's operating system blocking. It will most likely software firewall or security related.

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

• Photosmart HP 6510: HP Photosmart 6510 cannot print in black

  Like everyone, I tried all the reset standard and practices of head cleaning.

  Can anyone send me please the new reset instructions?

  Hi @gpn44,

  Welcome to the Forums of HP Support!

  I understand you have a print quality problem with printer HP Photosmart 6510. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Looks like you did a lot of good troubleshooting already. You followed this guide, Printers HP Photosmart 6510 - printer prints blank Page or does not print black or color ink?

  I can send you the steps to perform resets itself, however, I don't think it will do everything for the same problem.

  The cartridge is either dirty, defective or the print head is clogged. This print head is not removable, customer, but if the printer is out of warranty, you can try the steps outlined in these videos.

  This video shows you how to do a manual print head cleaning. I suggest you to watch the two videos before proceeding and use at your own discretion.

  Video: HP 5510 will not print black and color - print head removed and cleaned.

• Photosmart 6510 straight cut of the page

  Hello

  I'm on a macbook with OSX 10.5.8 with a Photosmart 6510.

  Installation went without problems, but when the right side of the print documents are cut despite the margins are the same on all sides.

  Subject of PDF, it seems as it should, it is not simply print as it should - miss me the right +/-1 cm from the paper.

  PS

  Also I would like to print aligned in the Middle, which - however - perhaps a Preview of Mac problem. However, ideas are welcome...

  I already tried all these things, but I discovered as the duplex unit being a little strange ITMIS. I noticed that it cropped only the last printed page - so I just added 2 empty pages at the end and it worked.

• C7520 replacing the black ink cartridge

  I have a photosmart printer.  The black original ink cartridge is marked the installation program and is soon exhausted.  Replace with a 564 black cartridge or the configuration of term refers to something else?

  Hello

  Please report the problem. Let me tell you the easiest way to find what slot will be what cartridge.

  The symbol on the location of the cartridges must match the symbols on the cartridges. Therefore a symbol as Pentagon/home in on the photo cartridge black which is bigger compared to the other cartridge and right most end, where as the symbol of the black cartridge ink is like a bow tie left most end. hopefully this will help.

  To help an employee of HP.

  * Say thank you by clicking on the "Bravo!" Star"located on the left *.

  * Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your issue.*

• C5580 keeps rejecting the black ink cartridge

  I tried to put in new ink cartridges and he always tells me that the black #74 is not the right cartridge. Well, it is. So, I followed the instructions and cleaned the contacts of the printer and the cartridge and still nothing. Removed from the cartridge, got another - same problem.

  Help please. I need this job.

  Thank you

  Shabby

  ch - color works very well and I bought the HP combo pack, so there is no way that I have the right product.

  Issue of FYI - after spending almost an hour on the phone with support - resolved.

  He took over and got a new!

  What hassle.

• HP 6520 will not work after changing the black ink cartridges

  Changed the cartridges and now black ink will not work. This is the second or third time only to change the cartridges - did not have a problem before, but of course, it is while the printer was still under warranty. It is now about a year and a half.

  I used all the suggested diagnosis - head cleaned, head aligned, etc, etc, etc, and nothing has helped.

  The black cartridge worked after the swap, but with a few lines do not print or missing--now produces almost nothing.

  Cartridges color was wonderful at the beginning of the troubleshooting process, but now they're starting to not look right - with spare no effort to correct the print head, he seems to be making it worse.

  Suggestions?

  @scrdagain

  I will send you a private message (departure from the envelope at the top on the right)

• I'm not able to find the black ink cartridge CH561h Hp122 near my place in Mumbai

  I'm not able to find hp122 black ink cartridge for ch561h near my position in India for my printer hp dekjet 1050 A all in one set then please let me know what other model cartridge n ° would work for my printer my hp 122 was the embarrassment. Otherwise let me know where in Mumbai 122 Hp cartridge is available or can u sell even online at my address. ?

  Hello

  The ink cartridges for the India are 802 balck ink (CH561ZZ) and 802 (CH562ZZ) color ink cartridges.

  You'll see maybe listed indformation suresupply by selecting your location and search for your printer model:

  https://h30042.www3.HP.com/SureSupply/CountryChangeSubmit.action?nav&nav#3

  Once you have the black and color ink cartridges available, contact HP support to reset your printer to accept the local cartridges for your region:

  http://WWW8.HP.com/in/en/contact-HP/phone-assist.html#section1

  Shlomi

• Photosmart 6510: How to prevent the printing of a file report after each print job. It wastes a lot of paper!

  Advice would be appreciated!

  You are welcome.

  Open Word and then click on the word or on the file menu and select Preferences.

  Click on print, then clear "Properties of the Document" in the section "Include document."

  Please let me know if this is useful,

  Shlomi

• Impossible to print from the internet using photosmart 6510, but print ok from the pc (Windows XP SP3)

  I rebooted the printer drive software.

  I tried the troubleshooting without success path.

  I just tried to print from IE and it works.

  The error is with firefox.

  Thank you very much for your help.

• I have a Photosmart 6510 which prints OK but will not scan. Printer msg = "none found computer."

  I have a HP Pavilion a730n with you-verse connected Windows XP.  I know the SSID name and it is displayed in the Wireless Setup Wizard but never received the installation of u-Verse password I tried like 6 different passwords without a bit of luck.  I do not have the Scan to manage many one able to complete the installation process until I have install the wireless part.  What is my next step. Help!

  Hello foxsweets

  I don't think that the printer can work properly by plugging into the router with USB. I noticed that you said that you don't have the password wireless for your network. The article below will help you find it.

  How to find the password WEP or WPA key for your network

  Install the software of the product for a wireless network connection

• Photosmart 6510 - how to pass the tray paper?

  I just bought the 6510 and want to print photos from my computer to the printer (I'm on Mac). Can not find a way to do it. If I click on 'photos', he goes to the card memory or snapfish.  I can't print the pix that I have on my computer for the little tray with photo paper?  Seems odd!

  I'm sorry that you are having this problem with the printer. Here is a document on printing the photos stored on your computer which covers the steps to do it with a Mac. It will give step by step instructions to do this task you want to accomplish. I hope this helps.