Photosmart 7510 display does not

Similar Questions

• New PhotoSmart 7510 print does not correctly

  I have a new 7510, replacing one PhotoSmart more old.  I have 2 problems with printing.  First - when you print an email the top and bottom of the headings are cut, print off the page.  Is there a setting I can adjust for this problem?

  Second - when I print photos I get a small thin strip of white at the top of each photo.  I feel no margins selected in Picasa as well as in the printer settings.  I am an avid scrapbooking need full size 4 by 6 photos to print.

  I've never had these any of these issues with my old printer.  I hope someone has a solution for me.  Thank you.

  Hi shiftee,.

  Follow the troubleshooting steps in the document below and let me know what you find?

  Troubleshooting print quality problems

• Equium A300D - 16 c - display does not

  My girlfriend has an Equium A300D - 16 c which had some problems lately.

  In recent months, whenever she turns on the system, the display does not pull upwards and it takes several tent for lights.

  The strange thing is every time that happens, the system boots normally always that you can hear the Windows 7 startup sound.

  I'm looking for in this question for some time now and I'm running out of ideas.
  Initially, I thought that it could be a wiring problem but by stripping the laptop down, I found that the cable was still firmly in place.

  I also tried to remove the RAM, HARD drive and DVD drive, but it still doesn't pull upward. On the odd occasion she started upward when you do it, but after restart, it has not started again.

  I think that this could be either a transmitting power or the mother board is on its way. This problem has worsened gradually (it took more than 20 attempts it turn on and off this morning) so finally he come not at all.

  To clarify, the system will start after several attempts, but most of the time that the screen not turn on (not even the backlight). It works with an external display on the HDMI so the GPU works.
  I tried to keep the power with no energy source button to unload the system, but it does not help.

  I also noticed that if you hear it boot and close the cover, the reopening of the display lid will come on but with the bad (1024 x 768) resolution that has intrigued me even more.

  Any ideas on what could be the problem? I would repair it rather than just buying a new as its still a decent system apart from this problem.

  > To clarify, the system will start after several attempts, but most of the time that the screen not turn on (not even the backlight). It works with an external display on the HDMI so the GPU works.

  This means that you can use the laptop as part of the external screen, but it does not work with the internal screen?

  This means that the internal display module isn't OK. It probably needs to be replaced.
  But this does not explain the problems while turning on the laptop.

  In the worst case the mother for laptop AND the internal screen are affected, but it would be really strange and rare bad luck

• updated my iPad to 9.3 air activate iPad display does not not my account information, but the Mac computer accepts my Apple ID and password

  updated my iPad to 9.3 air activate iPad display does not not my account information, but the Mac computer accepts my Apple ID and password

  A lot of people is affected by this problem, and Apple has worked on the issue.  Some found the following steps useful for this issue:

  Go to iCloud.com and select settings once you are connected.  Click on your device listed there and remove them from the account (not typing not erase or lost mode).  Restart your device and must ignore this lock of Activation screen because you actually disabled the lock by removing the device for iCloud.com

  I hope that helps!

• Download StarWar 6 pack - I get "movie will play not display does not support HDCP" I have a MacBook Pro '11 '.

  How to play movie with HDCP?   What is it?  Why he won't play on MacBook Pro 2011?

  Hello TheBell,

  Thank you for using communities of Apple Support.

  I see you found a mistake that "movie will not play, the display does not support HDCP" error when you try to play a movie downloaded on iTunes. I have a couple of things I would like that you try to refine the question.

  First, start your computer in safe mode and test the question.

  Try safe mode if your Mac does not end commissioning

  If after the test in safe mode, the issue is still in progress, and then create a new user and test in the new user.

  OS X Yosemite: set up users on your Mac.

  If you still have questions, additional information would be useful. Using an external monitor? If so, test with just the internal display on the MacBook Pro. All the other things you notice?

  Best regards.

• Photosmart Premium C310a: Photosmart Premium C310a does not detect photo paper in the status bar

  Prints on plain paper e.g. A4, but does not recognize the 6 x 4 photo paper in the tray above, asks me to load paper in the tray.

  Hi @Ebeniste1uk,

  Welcome to the HP Forums!

  I understand that your HP Photosmart Premium c310a does not detect your photo on Mac OS X 10.10 tray. I am pleased to see that for you!

  I would recommend going through this guide, the printer is not Pick Up paper from the Photo Trayand watch this video:

• Thunderbolt 10 Windows display does not work

  Hello

  I'm trying to implement the following configuration:

  I have 2 Macs:

  • Mac Mini (late 2014, 2.6 GHz Intel Core i5;) Intel Iris 5100 1536 MB) with Windows 10 (Home) installed through Boot Camp
  • 27 "iMac (late 2013; 3.5 GHz Intel Core i7;) NVIDIA GeForce GTX 780 M 4 GB) installed with OS X El Capitan

  I want to use the iMac as a display for the Mac mini, but it seems that thunderbolt display does not work (I can not upgrade to Windows 10 by pressing Cmd + F2)

  Could you please help to solve this problem?

  Kind regards

  Dmitry

  Please see use of your iMac as a display with the target - Apple Support Display Mode and Thunderbolt Firmware Update 1.2: continues to reappear and ports Thunderbolt and the target Display Mode may not work - Apple Su... .

  If command-F2 does not work

  If your iMac won't go to the target Display Mode when you press Control-F2, check these things:

  • Make sure the iMac that you try to use it as a screen that supports target Display Mode.
  • Make sure you are pressing Control-F2 on the keyboard which is connected to the iMac to use as a screen.
  • In the keyboard system preferences, if the check box is enabled to use all F1, F2, keys etc. as standard features, changes of command-Fn-F2 key combination.
  • Make sure that your Mini DisplayPort or Thunderbolt cable is connected to both computers.
  • If you are currently connected to the iMac, you want to use as a screen, try to connect to return to the login window. Then again press Control-F2.
  • Some old keyboards Apple and third-party keyboards allow may not control-F2 to toggle display modes. In this case, use the keyboard that came with your iMac to activate / deactivate the target Display Mode.
  • If your iMac is currently started in Windows, it will not be in target display mode. Target display mode is not supported in Boot Camp.

• SCREEN NOT COMING (display does not)

  Dear team

  Display does not come in my notebook whenever CapsLock light and light flashes, dealership also checked his RAM, but according to him, it's a problem internal, although wanting to take the necessary steps on an urgent basis

  Serial No. =[personal information deleted]

  PRODUCT C8C11PA #ACJ

  MODEL = HP 2000-2209TU

  [Personal information]

  1 flashes per second means CPU issue. You can have it fixed HP services.

  HP services will replace the right and exact part for this laptop.

  Having repaired with other technicians, I'm not saying that they are not good but that there could be a risk of other future issues.

• My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  Visit the HP website and look.

• 7510 Photosmart HP printer does not print

  I have problems with my printer does not print.  I printed a report successfully, but when I go to print from Photoshop, printing that says "print page 1, 0% complete" and nothing never goes out.  I turned off the printer and restarted the computer, and then he turned his back.  I unplugged the power cord to the printer and the wall, has waited more than 15 seconds, plugged everything back in and nothing has changed.  I have requed the print job whenever I did these things to solve problem above, but nothing has changed.

  I used to be able to easily print wireless from my Mac.  Then one day it stopped working.  Then I connected the USB cord to connect it to my Mac, now it does not work.  All boards with one or two printing problems would be greatly appreciated!

  OK, check the router firmware is updated.

  Then download and install this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-96959-2&cc=us&dlc=en&lc=en&os=219&product=5070121&sw_lang=

• Help please! Photosmart HP 6510 does not print

  Thank you for taking the time to read this.

  I had my HP Photosmart for about 6 months and it has worked well in the past by for the last two months, I can't get anything to print.

  If I send something to print the printer icon jumps up and down (and does not), when I opened the icon, it says:

  Print "Mocrosoft Word-..."

  Connected to the printer

  and then NOTHING!

  The other day, I spit a page that had been sent to print a number of weeks, but that's all.

  I uninstalled and reinstalled and looked through all the forums, I will find but have had no joy.

  If anyone can help me I would appreciate it really - I'm a mature student and I have a number of essays due.

  Thank you very much

  Hi jojodeb,

  Thanks for the reply.  I would like to reset the printing system, run software update and reinstall the printer with a USB cable.  If we are able to solve the problem effectively, we can then convert the wireless connection to test this type of communication. Follow the steps below and let me know the results.

  A. reset the operating system printing system:

  1. Choose System Preferences from the Apple menu.
  2. Choose Print & Fax on the menu display .
  3. Hold down the Option key while clicking on the "-" (deletion of printer). If no printer currently not added, hold down the Ctrl key while clicking on the button that appears above the button of "+" (add printer), and then choose reset printing... from the context menu.

  B. perform the software update:

  1. In the Apple menu, choose software update.

     
     Menu Apple in Mac OS X 10.6.6

  2. Software update checks the available updates. In the software update window, select the items you want to install, then click on install. Usually, you should install all available updates.
  3. Enter an administrator account name and password.
  4. Once the installation is complete, restart the computer if necessary.

  C. Reinstall printer with USB cable

  1. turn the printer and the computer

  2. connect the USB cable for printer

  3. USB connection to computer

  Note: this should automatically add the printer, if it does not manually add the TI-see below *.

  4. open system preferences, and then click Print & Fax

  5. click on the sign under component printer +.

  6. click on the name of the printer

  7. click on add

  8. test the functionality

  I hope this helps!

• Photosmart D7260: D7260 does not illuminate

  I turned off the printer using the power button. Now, I can't turn it on.

  I cut the current unit and the mains, wait for the green light from the transformer came out, reconnected to the mains and to the printer. The switch light does not come. The Cancel button is lights up the button print photos to the printer doesn't exist.

  Any suggestions?

  Thank you

  Frank C

  Hey there @FrankGC!

  Thanks for posting on the HP Forums!

  I should be able to help on the printer turn on/off do not.  You mentioned that light to cancel it and the light of the picture are on if the printer is powered.  The first thing I suggest is to plug the printer into the wall directly if there is currently a power surge protector or extension cord. This may sound silly, but this will ensure the printer gets full power and can eliminate any unnecessary troubleshooting. If the printer is no longer becomes full power of power against power surges or extension cord it can give false errors, have bad connection, questions and quality of paper feed problems.  It is also a good idea to try a different wall jack if the printer is already directly to a wall outlet.

  Here is a document about the flashing light errors on the printer: blinking lights on HP Photosmart D7200 and D7400 Printer Series.

  I recommend to check this document to see if there is a paper jam in the printer: a 'Paper Jam jam. Claire then press OK. "Views for HP Photosmart D7200 Printer series D7400.

  It would also be a good idea to check for a jam in transport as well by clicking on this document here: A 'transport Jam' Message is displayed for HP Photosmart D7200 and series D7400.

  Let me know if this helps solve the issue with your printer!

• Safari 9.1.3 textedit html/css not displaying does not correctly

  I am trying to learn html/css and I'm going through a basis of teaching course that you type some html and css style, and then open it in Safari.

  I went to textedit preferences and selected plain text, I unchecked .txt extension and saved as index.html to try it in safari, and it does not display properly, are there other settings should I set in textedit or safari so that it appears correctly. Here is my simple html text. Safari does not display the style.

  < html >

  < head >

  < title > coffee Starbuzz < /title >

  < style type = "text/css" >

  {body

  background-color: #d2b48c;

  left margin: 20%;

  right margin: 20%;

  Border: 2px dotted black;

  padding: 10px 10px 10px 10px

  do-family: without serif.

  }

  < / style >

  < / head >

  < body >

  Drinks at the coffee Starrbuzz < h1 > < / h1 >

  House mix of < h2 > $ 1.49 < / h2 >

  A smooth, sweet blend of < p > coffee from Mexico, Guatemala and bolivar. < /p >

  < h2 > moka Caffè Latte, $2.35 < / h2 >

  < p > Espresso, steamed milk chocolate syrup. < /p >

  < h2 > Cappuccino, $1.89 < / h2 >

  mix of espresso, steamed milk and milk foam. < /p > < p >

  < h2 > the Chai, $1.85 < / h2 >

  < p > a spicy drink made with black tea, spices, milk and honey < /p >

  < / body >

  < / html >

  My iOS is 10.11.6 Safari is 9.1.3

  Thank you

  Mike

  Have you tried to give the file an extension .css?

• Right-click menu that is displayed does not correctly

  I use firefox 17.0.9 ESR and extended display Windows, I have two screens, one is on 1440 x 900 and the other on 1920 x 1080, if I right click anywhere on the browser when it is on the small screen, everything works as expected, if I pass the browser to the bigger screen and click right I sometimes the menu Sometimes it shows and hide immediately and sometimes just won't show, if I move the mouse on the menu it shows yet once and then hides, this only happens when I move the browser to the larger screen

  Hello, this is perhaps a problem with hardware acceleration - please try to update your video driveror where this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in firefox > options > advanced > General.

• The Satellite A200 display does not illuminate after being idle for 15 minutes!

  Hello!

  I just bought a Satellite A200 1 - AX PSA6 and install Windows XP SP2 + upgrade of bios for winxp.
  After 15 minutes of unactivirty (no not pressing the keys or moving the mouse), I set in power options in Control Panel - what must power OFF display.
  After this time display is switched off (black)!

  But I can't wake up my laptop!
  I'm press any key or move the mouse, but the screen is always black!
  But laptop works!
  I can ping and then by network or remote access connection.

  One way to solve this problem:
  Laptop open and close!
  A200 - "standby mode" and wake up with swithches on screen...

  Hello

  It seems that Windows XP Home edition does not work perfectly on the new laptops designed Vista. Before you live your laptop try to change profile settings (extended battery) power and test the parameters of this profile.
  Tomorrow I'll try to install Windows XP Home on my A200 and I'm really interesting if I even notice.