Photosmart 7520: Photosmart 7520 - control Multipage in 1 a pdf using the bucket to

Similar Questions

• Photosmart HP 6520: HP Photosmart 6520 - error message when you try to use the apps

  I can't access is more apps on my Photosmart HP 6520.  I get the error message "error connection server - 1".

  I don't know if this problem just since I recently changed from a Windows PC on a Mac.

  I very rarely use the apps, so I don't know when it started.

  Everything else seems to work very well I would say.

  Can someone please tell me what could be the cause, or if there is something I can try to sort it out?

  I seem to be going round in circles, and I can't work on what is happening.

  Thanks for your help.

  Hey @TraceyMac,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you are unable to use the pads (Print Apps) on your HP Photosmart 6520 e-all-in-one printer.  I want to help you with this.  A recent installation of printer would not affect your performance of platelets but no loss of connection or wireless Web services could be a factor.

  Note that to access the applications and their use from the front panel of your printer requires two ingredients to be successful: 1) Wi - Fi connection and 2). the ePrint feature (webservices are enabled).

  • Touch the wireless icon () on the front panel of your printer - is the printer connected to your wireless network?  (If not, run the wireless configuration wizard, select your network name/SSID and enter your password wireless reconnect).  If you are connected, proceed as explained below.
  • Tap the icon of webservices/ePrint () on the front panel of your printer.
  • If webservices are not enabled, press OK in order to enable them and allow the automatic updates of printers.
  • This will cause your printer to print an information document describing the characters before @hpeprint.com your printer (ePrint address).  This is known as the claim code.  As another way to use printing applications available for your printer, you can sign in to http://www.hpconnected.com to program applications printing to print and review all the content that ideally will reappear on the front of your printer.
  • From there, you can click the devices tab and use the claimcode to add your printer to the site and take advantage of the available applications, it.

  If these basic steps to respond to a resolution, please, try the following:

  When users encounter this type of problem in general, I suggest from scratch with wireless printer, webservices, and apps printing configuration.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • Front panel of the printer, arrow down and select Tools
  • Select restore default

  Then touch the wireless icon, run the Wireless Setup Wizard to restore your network connection, and then tap the Webservices () and reactivate your webservices.

  If you are able to successfully reactivate your webservices, tap on the icon of your printer wireless () and make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  No none of the suggestions above restored the functionality you're looking for?  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• Photosmart B209a can you overried printer function? use the scan only?

  I have the Photosmart Plus B209a model installed print head is not intended for this printer, or is damaged. Refer to the Doc of the printer. Now, I have done this and cleaned ect. So, assuming that is damaged. I called to get this part and OMG! I might as well buy a new one! $85.00 and I did. My question is can I substitute the information of the printer and use the scan function again?   Thanks for any help!  Michael

  Unfortunately, you can not.  If the printer is in an error state, it locks you out of all the other functions of the printer.  I'm sorry.

• HP Photosmart 2710xi-one time because I needed to use the printer past - necessary password reset

  Been long since duty use password WPA security on my printer.  Do not remember what it is and need to reset but don't know how.  Printer has disappeared from my computer several months and I have just no longer using but discover me, I need lately and want to remedy.

  HP Photosmart 2710xi Vista 32 bit computer Dell 1525

  Thank you very much for any assistance you can provide!

  Hello

  Download and run the HP print and the utility of digitization of the link below.

  http://support.HP.com/us-en/document/c02073861

  On top, select Network tab > Show Advanced Info > show info wireless > wireless networks under Select your network and password will appear under wireless settings

• Margins on PDFs using HP Photosmart 7520

  I use Windows 7 Professional it and print a PDF of the latest version of Adobe Reader or PDF of power. I KNOW that the file has no margins. I put the window print to 'Fit' and the preview image in the print displays the document window fill the page without margins (the document is color is easy to check). When I print the document, my new printer 7520 shrinks the document to add 12 mm on the left and right margins. How to disable this option? This was never a problem with my old printer Photosmart C4780.

  Hello

  You cannot turn if you used duplex printing.

  Kind regards.

• Photosmart 7520 cannot be seen by any device except the router

  I bought a 7520 yesterday to replace an old B210 who had developed a very random error "wrong printhead installed", and initially got it works fine and printed several documents. However, try to use the printer today, he appeared offline in all programs and devices and printers. I've seen a lot of posts like this, but the difference is that I use Windows that apparently plays generally pretty good with HP printers. I tried static IP and auto IP, within the DHCP range and outside, nothing seems to work. The router seems to register it is fine, but when I type the IP address of the printer in Chrome or IE I get a page zero or a Web page error. I tried HP support cat earlier and I ended up going through a bunch of already tried troubleshooting steps that put an end to my computer restarts again and again until I removed the customer allowing access remotely. Suffice it to say that I prefer not to do that again.

  I don't really know what to think or what to try more. Software of HP does not recognize and won't be nor Windows, regardless of whether or not the printer drivers are installed. It seems that I should be able to get the IP address, if the drivers are installed or not; It is also important to mention that I tried with firewall, market to nothing does not.

  EDIT: No idea how relevant, it will be, but the old B210 is still listed in my printers and fax machines and cannot be deleted. Sometimes the 'yes' when I restart my computer has an icon of privilege administrator next to him and it will disappear, but it will always be there again next time I reboot. Usually I just get "access is denied, cannot delete the device. I thought that any problems encountered in this must be fixed by selecting a different IP address, but I don't really know. It's just strange.

  OK, well, Belkins are often issues regarding wireless printers.  I don't know what they're doing, but whatever it is the systems do not like a lot.

  We will try to enter the Belkin settings to disable ICMP Protection.

• Photosmart 5515 control panel ok for 2 years. Now in white

  Photosmart 5515 control panel ok for 2 years.  Now in white

  Under warranty?  Almost anything can be fixed, for a price.  No guarantee, I would just buy a new printer, they are quite cheap.

• Not able to scan from the printer to my computer control panel using the HP Photosmart 5510

  Hello

  I recently bought the new HP Photosmart 5510 all in one - and I am not able to scan from my printer to my computer.

  I am however able to scan by launching the scan of the computer. I talked to HP customer earlier this evening and we ran printing + scan doctor and can't find any problems.

  I am running Windows 7-64 bit and that you have installed my wireless printer using the Installation CD supplied with the printer today.

  I could not finish troubleshooting with the technician that I talked to because I had to go to work. The person that I spoke with proposed possibly the full functionality of software downloaded from the hp.com site, which I'm happy to do, but I think that it is useless, because I have the CD of installation here. (The rep that I talked to was very nice, but I prefer not to have to uninstall and reinstall if it is not necessary)

  Because as I mentioned above, everything works perfectly and I am able to scan - but not directly from the printer itself.

  When I try to scan from my printer to my computer an error message appears on the control panel of the printer indicating that: there is no scan destination options of analysis chosen / no..

  However, I can't find anywhere with my HP software where I could add / make sure that the destinations were there. (As I could on my other printers. (IE. By the solution Center)

  This printer does not appear to be a solution center that I could find and the scanner installed with the CD icon doesn't give me any options regarding changing the settings of the parser

  I wonder:

  1. the Hp Photosmart 5510 does not have the capacity to scan from the printer control panel?

  2 OR the CD installation provided with my printer only has the base drivers as the agent of tech support suggested? Which means to scan from my printer I need to download drivers for your hp Web site?

  3. or is the problem because of something else entirely?

  Thanks for your help!

  HI Dublin,

  Follow the steps below to uninstall and reinstall the printer.

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall the Photosmart 6510 in the list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the drivers and full software functionality, and then reinstall the printer.

  Version 28.8

• Can multiple Photosmarts (7510 and C309g) be configured to scan on the same computer?

  I have an Acer PC Windows 7 with an AMD Athlon X II processor, 4 GB of RAM.

  I have Photosmart C309g and everything-each 7510, both connected via wi - fi, using different IP addresses that are not in conflict with other devices on my network.

  I executed the complete installation for both HPs.

  I can print either, but I can scan only using the 7510.

  When I open the HP scan diagnostic, it does recognize that the 7510 - the c309g is not yet listed.

  I noticed only 7510 application record contains a HP scan application and it also recognizes that the 7510.

  There is no application scan c309g folder.  I tried Win 7 Windows Fax and Scan application but that also recognizes as the 7510.

  1. is there a way to configure the system so that it can print and scan from these two Photosmarts?

  2. If the scanning using a 7510 and c309g does not work, could I use a 7510 both a 7520?

  Hello Osiris43,

  Welcome to the HP forums! I understand that you are unable to scan a document using the Photosmart Premium C309.

  You should have two printers scanning capabilities, because they have a different software. The Photosmart printer using the Solution Center and the Photosmart 7510 uses the Printer Wizard.

  I suggest you uninstall/reinstall the software Photosmart Premium C309. Please follow these steps:

  Please follow this HP document uninstalling the software of the printer.

  Then, perform a clean boot on your computer. I'll give you a Microsoft document on this step here.

  Now, install the full features on the site of HP software here. Choose your operating system that is appropriate; 32-bit or 64-bit.

  Once installation is complete, please click on the document to Microsoft, and "how to reset the computer to start normally after a clean boot."

  Please send me your troubleshooting steps.

• HP Photosmart C6280: my HP Photosmart C6280 ceased printing and copying. I use a Mac OS 10.10.5

  My HP Photosmart C6280 stopped printing and copying. I use a Mac OS 10.10.5. The printer seems to work, but no ink is on paper with a function.

  I installed a new black ink cartridge and select "black only" with the same results. All the other ink levels are sufficient.

  I would appreciate your help. The printer has been idle for a few days but a previous usage has been a success.

  Welcome to the Forum from HP Support. I hope you're well @Suz161!

  Thank you access the Forums from HP Support for extra support! I see that you are having problems when copying / printing. I will do my best to help you with this problem.

  It looks like a problem with the printer ink. It may have dried due to non-use. I suggest that try you to perform a print head cleaning. Try the following steps:

  • On the printer control panel, press 'Setup '.
  • Press the down arrow button to select Tools and press OK.
  • Press the down arrow button to select "Clean printhead" and press OK.
  • If the print quality is acceptable, you can stop troubleshooting.
  • If the print quality is unacceptable, perform a print head cleaning.

  You can try the steps mentioned additional troubleshooting here: http://hp.care/2dVLZUu

  Let me know how it goes. Nice day!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• I bought a photosmart 5510 and I'm unable to connect to the internet.

  Hi, I am looking to connect my newly purchased Photosmart 5510 to the internet. I can see that it is connected to the homenetwork, but not the Internet, so I can't use the e-Print. I have a router D - Link DIR-635 B3 without the WPS button (maybe built in). I can't locate any relevant support.

  Logically, I can see that I can't proceed until the Internet recognizes the connection.

  All good ideas what the problem could be,

  '

  Jesper, Copenhagen

  Looks like some of the parameters of the network to the printer is maybe not correct or the ISP DNS servers may have been a problem for ePrint servers.

  Try to set an IP static, as shown in step 6 of this document from HP.  The only change I recommend is what DNS servers are used.  Use auxiliary favorite for DNS 8.8.8.8 and 8.8.4.4 for DNS.  These are Google's public DNS servers, but they tend to work very well with ePrint connection problems.

  Also, make sure that the proxy settings are blank and not controlled.  This is possible access SAP, as indicated in the document, and then go to network > Networking > Proxy Server.  If you receive a certificate warning, select the option that allows you to continue anyway.

  Once the static IP address with Google's DNS servers are defined and the proxy is disabled, try to re-enable web services.

  Let me know what happens.

• HP Photosmart, 7525 how to print photos from iPad to use the main paper tray.

  I have pictures of troubled impression of the main plate. He continues to try to use the smallest. Photo tray
  I tried selecting the main tray by default and will not work.
  With the help of hp photosmart 7525

  Hello

  If you use AirPrint, the default setting is to use the photo for the photo tray and the main tray for all other printing. AirPrint allows very little flexibility in this regard.

  To increase the flexibility around paper selection and the plateau, you will need to download the HPe-Print application on the app store and use it.

• Photosmart C4140: Using the adapter for SDHC and SDXC CF in Photosmart C4140

  I have a Photosmart C4140 printer and my cameras using SDHC and SDXC memory cards. I read the specs and some info online and it was stated that this printer does not support these cards. I bought a CF Ultimate Digigear adapter that accepts SDHC and SDCX cards for use in a CF Type 2 slot as the slot on the C4140.  I tried one of my SDXC cards and I get an error "memory card" on the LCD of the printer. Then, I tried the SDHC card in this card and it worked. I was able to view the photos on the LCD of the printer. However, when I tried this SDHC card by removing the adapter and re - insert into the CF slot, I started having the 'memory card error '.  I couldn't read this SDHC card in the new CF adapter. What could happen that he would only read the card only once? I checked this SDHC card in my camera and it still works and can store images. Does anyone know of any other CF adapters that can work?

  Info on this CF adapter can be found here:

  http://www.shopdigi.com/product.aspx?pf_id=SDXCF

  I would like any advice or ideas.

  After some trial and error, I discovered that the CF adapter has one slight movement from side to side, as he goes into the card slot see By putting my thumbs on the corners of the card and pushing the adapter in a fluid, non-stop movement, I was able to get the printer to recognize the adapter and the memory card. It takes a little practice.  This CF adapter works fine. Now I can use the cards SDHC and SDXC times with my printer. I need to buy a new printer.

• How change HP Photosmart B209a default scanning, such as changing .jpg at the exit of the .png file?

  Since upgrading my all-in-one HP Photosmart B209a, I can't find any more a link to the dialog box used to change things like .jpg .png output files, or the folder in which the Photosmart stores.  How to make these changes now?

  are noffkehw, you referring when you save scanned images? If Yes can you scan from the printer to the computer or through the software on the computer? If you use software on your computer, then you should be able to designate which files should be saved in format.

  If you use the printer to scan to a folder on your computer, you will need to use the printer software to activate several formats for the file to be saved as. This should be under actions to scan in your printing software - normally under the Scan of the computer.

  Let me know!

• How can I fix the problem of my HP Photosmart D7160 showing a message this cartridge has passed the expiration date?

  My HP Photosmart D7160 one shows message this cartridge has passed the expiration date.  I bought and installed the new cartridge but still same message.  I really need to print stuff.

  My HP Photosmart D7160 one shows message this cartridge has passed the expiration date.  I bought and installed the new cartridge but still same message.  I really need to print stuff.

  Contact HP?