Photosmart c5580 status offline

Similar Questions

• HP photosmart c5580 won't print documents under Vista

  HP photosmart c5580 won't print documents. Installed and reinstalled the software and still will not print. can scan documents to correct computer. will not copy or print from printer manually.

  C5500 printer is the default printer. I also have an hp c4280 printer that works if I want to print or scan at any time. I checked device drivers and it says they work prperly more, this is the last version of this printer. I used the troubleshooting of microsoft files site and everything out very well, but still does not print. The ink levels are new in the cartridges and the printer paper in the status bar. Internet connection and a connection between the product and the OK computer. I am lost as I bought all printers have been brand HP, and first time I had a problem.  I hope someone can help. Thanks Monkeytu

  Hi Monkeytu,

  See the article next to the HP Web site:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00843712&LC=en&DLC=en&cc=us&product=3575276

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot scan with Photosmart C5580

  Photosmart C5580, Windows XP Professional SP3 USB connection,

  Error messages:

  Everything by asking an analysis: "Can't find scan.msi" translates into a failed attempt to sweep.

  In addition, "error 1706: no valid source could be found for the analysis of the product."  Windows install cannot continue. »

  "Fatal Error".

  Thank you.

  Hi Buppa48,

  Follow the steps outlined in the document below and let me know what you find?

  Error fatal "error 1706. No valid source could be found for. "(MSI Error 1706) Message appears during Installation of the software under Windows

• HP photosmart c5580 who don't scan to computer

  I have a HP photosmart c5580 who won't be no sweep on computer. but will scan to a USB card or media. Error message States to: try running the scan of the computer. Refer to the documentation for more details.

  Thanks for your help.

  Kind regards.

  Hello SolidRock,

  Welcome to the Forums of HP Support!

  I see your message and the private message that you are unable to scan to your computer using the C5580. I am very sure that you found something not HP if she asked you to pay for the drivers, unless you've tried to order a CD

  Go to this link: all-in-one printer, HP Photosmart C5580 supports. Select your operating system, and then click Next. Select the driver - software product Installation (1), then download.

  Once the software is downloaded, you will be able to install the software and the scan.

  Kind regards

• Photosmart C5580: Solution Center

  Had trouble scanning to Quicken 2014.

  Always Solution Center uninstalled and reinstalled with the CD supplied with the printer, then put updated by internet.

  My problem is the CD of the Moose is missing and I'm unable to locate the program on the HP website.

  Any help would be appreciated.

  Hi @DanlBoone,

  Welcome to the Forums of HP's Support. I understand that you cannot find the software for your Photosmart C5580. I would like to help.

  The HP Solution Center is part of the complete package of features printers. This link will help you get the right software. Software and driver for: printer all-in-one HP Photosmart C5580

  If you need help more made me know.

• Quality of printing on my HP Photosmart C5580 all in one is not very good

  Hello

  My parents have a HP Photosmart C5580 all-in-one printer.  Their old computer was running XP and the printer printed beautiful photo (using HP Photo paper).  The recently buy a new computer that is running Windows 7.  They called me after that that they got rid of their old computer XP.

  The problem is that the HP C5580 is no longer made a good job of photo printing.   I have been in their house and they owe me that the use of the printer to print then we have printed a new photo to the printer (which was horrible).  I then downloaded the latest drivers for Windows 7 from HP, installed and reprinted the image.

  The XP computer disappeared, so I've no idea what program they used to print photos.  I used Picas (latest version) to view and print the pictures on Windows 7.

  The new photos are very washed out. They remind me of the photos printed on the ink jet printer initially on plain paper.  They are not photographs.

  Anyone have any ideas to improve the quality of the photos?  If it is a better program than Picasa we should use to print the photo?  Is there a way to caliabrate the printer?

  Thank you

  Dennis

  Hi Dennis you have posted on the discussion of the ePrint/Mobile Forum so I'll ask that your post moved to the Printing Board Issues & troubleshooting in the hope that you receive relevant responses. In the meantime, I suggest that you check the ink levels in the supplies in the printer and print a diagnostic. You should be able to get it out in the printing software HP you have downloaded or directly from the front panel of the printer. If ink, levels are low in all of the test color cartridges to see if that solves the look "washed out" prints.

  Good luck.

• HP Photosmart c5580 wireless configuration

  Hi just bought my HP Photosmart c5580, I want to install it on my desktop and maximize its bluetooth capability, I have a netgear router and then I connected it to my router instead since its my desktop pc is not compatible Bluetooth?

  Your help would be appreciated.

  Thanks in advance.

  DAvey,

  Can i have connected it to my router instead since its my desktop pc is not compatible Bluetooth?

  It is not possible. Connectivity bluetooth can only be used for the printing of the pictures of Bluetooth compatible cell phones or computers with bluetooth capability. Whatever it is, you will not be able to scan using the bluetooth connection. So it is best, if you opt for a wireless printer using the standard wireless 802.11 g. In this way, you can connect it to your Netgear router.

• Get a PhotoSmart C5580 to work with a Bluetooth connection in Windows 8

  I have a PhotoSmart C5580 for several years.  It was working fine with my old laptop running Windows 7 with USB and Bluetooth.  My new laptop has 8 64-bit Windows and the USB connection works fine, but I can't get the Bluetooth connection to work for the life of me.  The old laptop needed a USB Bluetooth adapter, but the new laptop has Bluetooth built in.

  I'm pretty tech savvy and searched through various online and tried the HP Installation Wizard help documents, but they speak mainly on USB and wireless and not on Bluetooth technology.  The Panel has USB and BT printers installed.  BT is currently marked as default printer.  The BT menu on the printer is marked to be visible, and BT options on the computer seem far too, because the computer totally see the BT printer.  The list of Windows 8 devices (two BT and otherwise) lists currently both the USB printer, which according to her, is cause of disconnected the USB cable is disconnected in fact and not the BT printer, he's talking about.

  Whenever I have remove the BT printer and add it again, the HP software/driver installs again and says it's successful (even if the driver for the USB connection and the software are already installed and work very well).

  The only problem is that the HP Solution Center indicates that the BT printer is disconnected.  It really tells me nothing more than that.  It's the same message that my old laptop would give me if I didn't have the USB Bluetooth adapter plugged in, but here the BT is built, and the computer says it is on and working very well.  So I'm a little confused at this point.  Any help anyone can offer would be greatly appreciated.  Thank you!

  I am delighted to hear that, and I'll pass that along our engineers so that they do not worry. I didn't even really think, but if you leave the USB cord is plugged it will disable the BT adapter in the machine - which could cause prints of BT to fail but not USB prints.

  Have a wonderful day!

• Photosmart C5580: Printer on Windows 7 networking don't print network shared computer

  I've been trading emails with HP support for several days now on this problem and they are unable to solve.

  I have a Photosmart C5580 all-in-one printer connected to a computer HP Pavilion 64 bits with Windows 7 Ultimate edition.  I shared the printer and created a homegroup with one not also loaded with Windows 7 Ultimate 32-bit HP.  Also on the network is a laptop HP with Windows 7 Ultimate edition.

  That is the problem.  I can print the C5580 of the host computer and the HP laptop.  The printer will not respond to the 32-bit computer with the print job hanging in Quebec with an error.  Of course, the window Troubleshooting Wizard is no help.  I installed the package of windows 7 HP printer on all three computers.  I added the printer through the Add Wizard of the printer, tried to add network printer connection, add a TCP/IP port for the printer properties to the 32-bit computer.  I followed the instructions of

  http://support.HP.com/us-en/document/c01886193

  HP and I have run each step resolution of problems they can think of and we begin to repeat.

  Does anyone else have this problem and how did you solve it?

  It is a 32-bit to 64-bit problem. Turns out that the driver for the x 86 processor must be installed on the two computer and vice versa for a 64-bit computer, trying to pint on a x 86 processor.

  I found the solution on microsoft technet at http://social.technet.microsoft.com/Forums/en-US/winserverprint/thread/6067a35d-d9ac-4f52-8beb-9aca3f116e9e

  Here's what I did to remedy.

  On the printserver 64 bit, I opened the printer sharing tab properties.

  Then I opened the button drivers additional.

  The x 86 processor has not been installed.

  I sailed on the network to the 32-bit computer and wanted by the printer drivers in the c:/windows/system32/driversStore/fileRepository to find the prnhp00r.inf.

  After I installed this driver, the printer would answer correctly.

• The HP software update causes network deskjet 6940dt in status 'offline '.

  On 02/10/09, updated HP introduced an update marked "critical update to enhance reliability of network and USB connectivity and printing system response. I did the installation. Since then, my ethernet connected Deskjet 6940dt is in status 'offline '. Someone knows something about this problem?

  I am assuming that you are using a PC (Vista?).

  The printer folder, double-click the printer to open the print queue.  Select the printer in the menu bar and make sure that use printer offline is not selected.

  Then you can access the printer's internal web page by accessing its IP address?  You can find the IP address of the printer by pressing the check mark on the printer.

  Finally, power cycle the printer.

• Photosmart C7250 list offline wireless

  Photosmart C7250 connected to the TouchSmart IQ505 via radio. printer will appear as online and work for a period of time with the radio. Then, it will show as offline and cannot print. Cannot set the status online through the option of Fix It printing software.

  Uninstalled/reinstalled/application printer drivers solves problem temporarily. Removed and re-add printer solves problem temporarily. Attempted to set the printer status online via HP difficulty he fail option (from the printer software). This occurs only via wireless my TouchSmart IQ505 to the printer. Using the cable USB is successful. Using the wireless to print via computer laptop (HP DV4000 CTO) is successful; Although unable to scan documents to laptop.

  Nothing has changed with my PC (TouchSmart IQ505) I know. It's frustrating to have to uninstall and reinstall the printer or the software every time just to be able to use the wireless function (the main reason we bought this all-in-one).

  I sent the information above to HP for assistance as well.  I'm looking for you, the community of end users for assistance.  It is because I do not know that HP will tell me to uninstall/reinstall the printer and/or software.  Something I really wanted to do... again...

  Thank you!!!

  kln1208,

  Are you suggesting that I give a static IP address to the printer?

• Photosmart D110 - printer offline

  I have just connected my HP Photosmart D110 printer to my home network and all PCs connect to and printed pages of test successfully.  2 days later, none are of the PC can connect to the printer all show the printer is offline.  I go to the printer and check the connection and everything is displayed on the status page that the printer is connected to the network - I have 4 or 5 bars, what is my IP address and everything is going well.  I connect to the router Cisco E3000 and shows me that the printer is connected and the IP addresses match.  When I run the software of HP network troubleshooting, it is still impossible to find the printer either.  I completely reset the printer to factory and re-configured specifications.  No luck.  Printing software was loaded from the CD on each of the 5 PC on my network and in each case he originally found the printer.  The only thing I did after the initial installation was to activate the e-print service.  I have not tested to see if it works.

  Okay, if your router is 192.168.1.1 and the computer to... 2, then the printer has an IP address that is not compatible with the structure of the IP of your router.  The computer will never find it.  We must remember that it is still attached to your old router.

  We will reset the printer from the front panel: Setup > network > reset default network (or similar words).  Now, he should be able to be found by the software.

• HPC7280 HP Photosmart Solution Center - offline

  I am running Windows XP SP3 on a wireless network.

  I configured the printer on the network wireless without any problem and I use a fixed IP address for the device.

  I installed the printer drivers and associated software.

  Found device Solution Center.

  I finished all updates and configured the software from the HP Solution Center.

  Found device Solution Center.  Fax test runs without error.  Printing and scanning all work fine.

  I configured my firewall to allow all UDP and TCP ports.  I don't get any version of messages - using CA Personal Firewall - Firewall 9.1.0.38.

  If I take the printer or on my computer, Solution Center advises HP Photosmart C7200 offline series.

  Print still functions very well.

  Network affecting always displayed in Internet Explorer - device status indicates ready.  Items requiring special attention - Nile.

  Scanning still functions very well through the Wizard Windows Scanner and camera and Solution Center.

  Faxing won't work.  Test the configuration of the fax machine shows the window, but click on the button to process message "fax test could not be run.  Check your HP device for any problems.through Windows Fax printer solution Center still indicates shows as loan.  However if I try to print a test page and the HP send fax software begins and I click send fax - message - fax not could be sent.  The fax will be move in the fax log!

  Also when I press the Scan button on the device and select scan from the computer, it is no longer detects the computer and displays the message 'no. Scan Options '.

  Disabling the firewall makes no difference.

  I did a lot of research to find out how to solve this problem, but at this point, I have not found solutions.

  I reinstalled the software several times, but I still have to be able to find a stable solution.

  Help, please!

  Fortunately, I had some news time to lose.

  I have remove the Setup again.

  This time, I have installed the system and then just installed PS_AIO_02_100_009.exe - for printing recto verso and other corrections.

  I HAVE NOT installed the patch of NETWORK SLP_DD_HATHi_110_017.exe - Networking implementation (it is the who advised the DEXTER of HP.)

  I also made sure I disabled the HP Update software so that I would not get this installed as an update.

  It is now closed for several weeks and seems to be much more stable - if the printer is turned off or on.

  Still, I do not consider this problem, but I guess that HP is no longer go any more work on it like him are now mainly focused on Vista and XP is no longer a priority for them.

  Good luck to everyone out there who encounter this problem, I hope this helps you as well.

• Network engineering, R7800 details always status: offline. IOS: 10.0.2 iphone 6s

  Hello

  Engineering app > NIC > icon Router R700 > Details:

  R7800 router status is still offline,

  But the router in the browser is online,

  (And it's online).

  App version: 2.4.30

  The router firmware: V1.0.2.04WW.

  IOS on iphone 6s 10.0.2.

  Is this a bug?

  Best regards

  Loui,

  @diralex It's very strange. Have you tried to delete the app, and then reinstall it?

  I'm unable to replicate.

  

• HP Photosmart 5510 'Printer offline' show

  To the right,.
  
  I started having a problem with my HP Photosmart 5510 - running on a Mac OS x 10.6.8 computer wirelessy.
  
  Until yesterday, I was able to print wireless towards her, even when he was asleep he wakes up and print.
  
  Now, however, I get a "Printer offline" message whenever I try to print what he's awake or not and I have to turn on the printer and on again before it prints.
  
  My printer HP utility can see the printer and it is connected to my network.
  
  Any help would be appreciated,
  Thank you
  Ronan

  I found this on the Apache site:

  "You unexpectedly see an Apache HTTP Server installation page when you visit a Web site. If you sent us mail because you have seen a page saying "it worked!" (or something similar indicating that Apache has been installed) on your screen or a Web site you have visited, please go back and READ the page. It must also specify what happens. The page is the equivalent of a demo or the Readme file from a Windows installation of the application; It is intended for the person who has installed the software and is supposed to show that the installation has been completed successfully. The problem you are experiencing has nothing to do with us, and we cannot help you. You must contact the webmaster of the site. If the site is www.foo.com, for example, try to send mail to . If it is www.toddsbeer.org, send an email to . And so on. »

  I think that there is something funny, with (probably your DNS of ISP) your router's DNS settings.  You can enter the configuration of the router and change the google DNS or OpenDNS DNS?