PhotoSmart C7200, Radio / on collar, Radio Working/fail-does that mean? Printer does not print

Similar Questions

• Photosmart C7250, Radio working "failed."

  I can't get my Photosmart C7250 to connect to my wireless router or connect adhoc with my laptop.

  My "Wireless Network Test report" says that the "Radio works, failed. He also says "Radio on, spent. The report says to contact HP support. I turned this printer market several times. I also restored to factory several times. Here are the only options that I can see on this machine. Any ideas how to restore the functionality of this printer Radio?

  Try a hard reset: turn the power off, press and hold # and 9 keys while and a few seconds after turning it back on.

• Photosmart C7280 'Radio work' "failed."

  I can't get our Photosmart 7280 C to work wireless.

  My "Wireless Network Test report" says that the "Radio job" "failed."  The same report said the 'Radio' "success."

  The report said "Contact HP support".

  This is the site where I need to be?  If so someone can help?

  Thank you!

  This is not supported for HP.  Here's how to contact HP technical support: www.hp.com/go/totalcare (click on printers & monitors, there is a phone number on the resulting page).

  Try to reset the printer: turn the power off, hold it # and 6 keys while and a few seconds after I turn it back on.

• Once I changed my ISP my computer network does not work and does not recognize my router lynsys

  Once I changed my ISP my computer network does not work and does not recognize my router lynsys

  Hi George,.
  Please go to the Microsoft Community Forums.
   
  1. do you get an error message?
  2. do you have the internet connection wired or wireless?
  3. What is the brand and model of the computer?
   
  I suggest to refer to the links and follow the steps in the articles:
   
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help?T1=Tab03#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Resources for the resolution of the problems of modem in Windows XP
  http://support.Microsoft.com/kb/308022#top
   
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702
   
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357#appliesTo
   
  If the problem persists, contact the Internet service provider for assistance.
   
  I hope this helps.

• Photosmart c7280 will not keep Wi - Fi. said the radio but the radio works failed. repairable

  HP photosmart c7280 wireless printer has been working and connected to the router. Stop printing. The test report under collar "Radio on", according to Radio wireless working' fail. Is - fixable? The printer is only used wireless and not as part of a networked system.

  I thank very you much for your help and confirmation. I certainly could have been more specific about the problem and what I did. It was my first time, and you were very understanding.

  Thank you once again

  Sandy

• Radio button selections does not save

  I'm creating a form of performance review. I have a section where employees need to rate themselves on a scale of 1 to 5. (1 = low, 2 = good, 3 = meets expectations, 4 = exceeds expectations, 5 = outstanding) I radio for each option buttons so that they are allowed to select a. However, when I go in, as the employee to complete the form and select the radio field I want, the selection does not record.

  Is there a way to make sure the radio button selections are saved?

  Or is there a better option?

  Hi kellyr19545348,

  Please save the PDF under the drive extended to allow other users to save the options they are checking.

  Open a PDF in Acrobat

  Go to file > save as other > Reader Extended PDF > allow more tools

  Thank you

  Abhishek

• HP Photosmart C6280 all-in-one: HP Solution Center does not work. I can print but not scan

  I can't open the HP Solution Center to scan. When I try to open it I get a notification that all software is not installed. I ran Dr. scanning HP and all software installation downloaded and ran. Every thing is installed. Tried to open it to new and same result.

  Am going to the forum and found this update of windows 3132372 could be the problem. Checked and I do not have that update to uninstall.

  Because the HP Scan and Capture app can be a solution. Who has downloaded but it refused to detect my printer.

  I really need to solve this problem. I got nothing else problems with printing and scanning as Windows 10 came.

  A ran a uninstall and reinstalled (second time). It's working now.

• Photosmart C6380 all-in-one: HP Solution Center does not work after update to the last version of Windows 10

  Printer worked flawlessly after upgrade to Windows 10. But with the last update, I can't scan more by HP Solution Center. I tried HP doctor and then remove and reinstall the software suite full, ensuring I have the latest drivers, but it still does not work. HP Solution Center is installed on my pc, I can even click on it and then it opens (briefly) and then closes, there is no way I can use the features. [However, doctor of HP, I could do an analysis of test and that worked, so there is nothing wrong with it.] Help...

  Hello

  Microsoft has since released a new update for this problem.

  Fix solution:

  Please download and install the following update KB3133431 from Microsoft:

  https://support.Microsoft.com/en-us/KB/3133431

  Note This update is available through Windows Update only. (Updates )  must be lit)

  1. Click the Start button, select 'Settings' and select 'Making day & security'
  2. Under "Windows Update", select "Advanced Options".
  3. Under "Choose how updates are installed," select "automatic (recommended) in the drop-down list in the menu drop-down."

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• Run VI Invoke node: VI works, EXE does not work?

  It is LV2009 without patches or updates. I call buffer.vi of static reference with a collection of nodes to invoke to run a VI. I don't have a very good reason for it, but don't want this code on the block diagram. I can't wait to put a lot of effort in this since I can just drag the code on the main scheme and I am sure it will work, but I do not understand why it gives me error 1000: VI not in a State compatible with this operation?

  In the EXE file, when I check the status of the execution of the buffer.vi until I say it runs, sometimes bad. Same code in VI, sometimes slow. I also tried to replace the static VI reference with a reference open VI by using the name of the buffer and received the same error message. I have the buffer VI included in the compilation under always included.

  So I was building an example of project because I didn't post all, boredom was the example ON what EXE has no error. WTF. Then I realized that I had another call from node in the boot sequence. OOPS. I put that in there thinking that the only way it would be mistake was if the VI was running before he called, in this case I wanted an abortion there. It turns out also-error (1044 locked VI) when running in an EXE file, even if this particular node using says he works with the runtime. SO, he tried to abort a VI that was not working. The initial error, 1000, just said not compatible with call node state, did not say that one.

  Yes, sorry for the trouble and thanks for the help. Maybe someday I'll understand the problem that I was led to this, guess who is the fact that I can't debug EXEs. Kind of, I think it has something to do with an XControl I always use it because they always appear as corrupted files just before that the debugger fails. Anyway, thanks again, I'll plug that into the real system and see what else does not work.

• HP Photosmart c4599: upgrade to 10 W and now does not print HP Photosmartc4599

  Updated to 10 W and now the printer does not work.

  Hi @beejuice,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print the Photosmart c4599 printer. I would like to see this with you.

  How is the printer connected? (USB / wireless)

  What is the error message that you receive?

  In the meantime, I'll try this document: HP printers - "offline" Status Message printer (Windows 10).

  If you need assistance, please let me know the instructions above.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• PhotoSmart 3210 All In One wireless network and does not know how to connect now lost.

  Hi, I have a 3210 all in one Photosmart, and I can't find it on the network more.

  I know that I've done worse of unistalling, reinstallation of the driver HP software and change the IP address of the printer. So I hope that someone can help me with this problem and return to the place where its still visible.

  I have a PC with XP and a Mac with OS 10

  Computers are both connected to the modem wireless cable router.

  The printer is connected to the router via ethernet.

  I can see the printer using a browser and entering the IP address of the printer. I can ping its IP address. The Mac can see the printer, but have installed the correct drivers to see (I think I can handle this, no need to worry about this yet).

  The problem is that I can't see it in the "Add a printer" Wizard on the PC. So I can't add it to the PC.

  I looked around the support of HP and they told me to uninstall the drivers and reinstall them. There was also mention of changing the IP address of the printer to a larger number, but that no longer works. So I went to the automatic assignment of an IP address to the address of the printer. And finally, I've seen mention to unplug the printer and by pressing 'ok' and 'Cancel' all plugging back in. He did a very long installation, but does not solve the problem.

  I searched the forums for a solution and can not find one - so I've exhausted all help (Ive been on the forums enough to know to search before posting a question).

  If Im not sure what to do next. Someone at - it suggestions? I don't really know what I can do to fix this problem: I'm sure it is just a corrupted file or bad setting somewhere I just do not know where he is.

  Thanks in advance for any help.

  Message edited by creeg on 30/09/2009 22:42

  For your Mac:

  If you're running Snow Leopard, the driver for the 3210 is compiled.  Open the applet Print & Fax under system preferences, then press [+] to add the printer.  For other versions of Mac OS, download the driver from here and run the installer.
   
  If you continue to have problems with the Mac, reset the printing system Mac and repeat the instructions above.  Information about resetting your Mac printing system can be found here (http://support.apple.com/kb/HT1341)

  For the PC:

  The 3210 is on the network, we will try to add the printer manually. First verify that you can access the printer's internal web page by accessing its IP address or host name.  You can find the IP address and the host name by printing the network configuration page.

  Here is the sequence of manual installation of the printer driver for XP:

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the host name of the printer. You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".

  
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."

• iPhone 7 more - Siri iOS10 not work and does not

  I received my iPhone 7 Plus 3 days ago and tried to set up "Hey Siri". In the process, I noticed that Siri was insensitive and does not work.

  I did some troubleshooting and started with the reset, restore, turned dictation & Siri/off voltage (before and after reboot) and still no response from Siri.

  I proceeded to remove the hardware problem by making a call and speaking directly into the microphone with high and low height during a call. Nobody who assists heard both high and low perfectly. I only tested the microphone with voice memo and the microphone worked fine.

  Called customer service on speaker (which call was working properly) but they were unable to provide a response, rep said she would follow with me Wednesday.

  I press the home button, Siri will appear with the wavelength and as soon as I said a word Siri States "I didn't understand" and rest wavelength normal. I don't know if there is a problem with my phone or iOS10, but if someone has an answer or has the same issue please chime. Thank you!

  iOS 10, when using Siri, you hold DOWN the home button while talking with Siri.  Release the button when you are finished speaking.

  Best,

  GDG

• iPhone screen not working sometimes does not

  A very strange. Sometimes I am not able of great calls on my iPhone while its coastline 5s. When the phone is locked, it should drag the button to the right of ours but his does not work. my screen is unresponsive. But I cut the call and do it again once it works. Is there any button through with I can take calls until I arrived in Dubai to get this phone to an authorized service center.

  This information can help you to 629 http://www.macworld.co.uk/how-to/iosapps/how-fix-unresponsive-iphone-screen-3626 /

• Setup worked, installation does not

  Make bootable El Capitan article Apple Setup worked well. Boot the installer worked well. Seemd installation works well but I got stuck saying "less than a minute" for a very long time. I tried with several usb keys and got the same result every time.

  No clue on hiw to solve this problem? Are there limitations as installation on external ssd?

  First of all: Please make sure that the installation is blocked. You can check this by pressing Cmd + L to display the log. Check that the files are not installed.

  If it's really really stuck: press and hold the power button to turn off the Mac and press the power button to start. Wait to see if the bar progresses. (You can bring up the Log window again.)

  If this does not work, restart the Mac while pressing Cmd, Option, P, and R. This will reset the NVRAM. Wait for the computer to restart and wait to see if it starts to update.

• I can't download to work - it does not copy the mp3 files to my location (as defined in tools/options) - it gives me a new window with a player - no dwnlo

  I am running windows xp sp2 and I put my site to dowload under (Tools/options), but when I select an MP3 file to download, firefox does NOT copy the file to my location of choice on my HD - instead, it opens a new window with a 'player' of fortune and starts to load the player with the MP3 file. The problem is that I have no idea where on my system, firefox has copied this file, so, I can't leave and come back later and read this MP3 file using winamp. I need to hear right then or lose - if I close this new window (with this puny little ' player'), then I lose the download, there where to put firefox on my PC (I have no idea where it is). It's all under firefox 25.0

  I also use FIrefox 12.0 on an older windows 2000 machine and that works perfectly - I can download any MP3 file, I want to, and downloads of firefox 12.0 (on win2k, sp4) to my location (on my HD), and it gives me the download window so I can watch its progress and have some control over break and resume , and, when it's done, the download window offers me the option 'open containing folder' so I can make sure that where I wanted. In other words, Firefox 12.0 on WIn2k, sp4 works better than firefox on winxp sp2 25.0! What gives? I went through and set up my options for XP just like I did with Win2k and everything looks good, but firefox 25.0 don't know just my chosen and always default place to give me fortune player and I am not able to actually copy the mp3 files on my hard drive - it's firerox almost unusable 25.0 since downloading mp3 files is a big part of my use firexfox - please help. I am not able to upgrade windows at this time, and since firefox 12.0 still works fine on win2k, I do not understand what has happened to firefox?

  Hello littleberry, you can click on the link that leads to an mp3 file or right click on the drive in firefox and choose to download the file like that...