Photosmart HP 6520: Connectivity Photosmart HP 6520 problem

Similar Questions

• Remote Desktop connection has encountered a problem and must be nearby

  When printing a tag printing in internet explore from a server terminal server. I get the message "Remote Desktop connection has encountered a problem and needs to close". I get disconnected from the terminal server. I updated the file screwdriver as well as pilots of the printer. The printer is a HP3600.

  Hi Marcus,

  The question you have posted is related to the server terminal server and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• 6520: problem starting c:\Program HP HP Photosmart 6520 series\bin\HPStatusBL.dll

  I uninstalled the HP 6520; didn't uninstall errors. [do not remember if I uninstalled with a 6520 uninstall exe or if I did it with Windows 10 uninstall programs.]  Now, every time I start my PC, I get an Error Message window indicating "there was a problem starting c:\Program HP HP Photosmart 6520 series\bin\HPStatusBL.dll the specified module could not be found."

  I have a Photosmart C7250 which is attached to my router via LAN as a network printer and works as it should.

  I would like to get rid of the Photosmart missing dll error, but, not at the expense of ruining the c7250.

  The 6520 file is missing, the 6520 has been correctly removed from devices and printers.  Why my PC is still trying to load a dll missing at startup after that the 6520 6520 was supposed to be uninstalled?

  How can I fix the error starting 6520 without spoiling the C7250?

  Hi @PineSap,

  Welcome to the Forums of HP Support! I see from your HP Officejet 6520 uninstalling you now this error message ' there was a problem starting C:\program HP HP Deskjet 1510 series\bin\HPStatusBL.dll .

  " The specified module could not be found ' at startup.

  After some research, I was able to find this solution on Forums, see below:

  For Windows 10 publication RunDLL error (HPStatusBL.dll) check this site:

  (Activate prior the hidden files and folders)

  C:\Users\(your user name) \AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup

  (Maybe depending on who has installed the software, see other users if you do not do so in your profile)

  Remove the shortcut that HP does not decently cleanup during uninstall:

  Monitor alerts of ink - HP xxxxxxxxxx -Source

  I hope that this helps, please let me know the results. I'll watch for your reply.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• Photosmart 5510 - scanning problem; Impossible to establish a session / unable to connect to the computer

  Photosmart 5510 was printing and scan OK, but now can not sweep.  Printing is OK.  Have reinstalled the drivers, reinstalled the software, rebooted Mac and printer.  Operating system OS X 10.6.8.  Received error message when reinstalling software "com.hp.dmf.DeviceConfiguration.ErrorDomain error-2002", but did not cause of reinstallation of software to fail.

  Have you tried everything I can think of... any suggestions?

  I did all that, but he also discovered that my macbook has a manually assigned IP address outside the DHCP range, router, so the printer/scanner perhaps could not see it on the network.  One or the other or both solved the problem... Thank you!

• Photosmart HP: Printing problems with my HP Photosmart

  I had problems with my photosmart for awhile. For a while, when I would plug into the usb port of my computer, I had received the error "the disk you inserted is not readable by this computer. I used to ignore the error and used to print anyway.

  Yesterday, someone pushes my printer without unplugging the usb by behind. Now, when I try to print something, I see in the queue of the printer, the error message saying "communication error: the computer is therefore more able to communicate with your printer." "Turn off the printer, check your printer connections and look for errors in the printer and turn on the printer. I got it done and straightened my computer as well, but it does not work. After that, I opened the printer utility via my computer to print a test page, and it worked really, which is strange.

  Thanks for your help,

  Sarah

  Hi @stoukan,

  I see that you are getting the error "communication error: the computer is therefore more able to communicate with your printer." Turn off the printer, check your printer connections and search for printing errors and turn the printer. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  What is the name and the product number of your printer? How can I find my model number or product number?

  Turn on the printer and make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. The USB cable should not be more then 6 feet. Make sure that the USB cable is connected directly to the computer. (not a station or a hub) Try a different USB port on the computer. Check that the USB cable is connected to the appropriate port on the back of the printer.

  Check if the Mac sees the printer is connected.

  Go to the Apple, select about this Mac, system report, select USB.
  Do you see the printer listed?

  Fix permissions of the drive on the Mac:
  Close all applications.
  In the Apple menu, click OK, click Applications, and then click utilities.
  Double-click disk utility.
  Highlight your hard drive / partition on the left.
  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.
  Click on Printers & Scanners.
  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.
  Click OK to confirm the reset.
  Type the name and the correct password.
  Click OK to reset the printing system.
  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  If you're still having problems, please try another USB cable.

  If there is anything else I can help you, let me know. Thank you.

• HP Photosmart 5520 - analysis problems

  10.9.2 OSX

  HP Photosmart 5520

  Connected wireless to the MacBook Pro.

  Have been able to search more than a year. But suddenly the scan does not work. (Error message: Communication cannot be established). I tried to uninstall and reinstall. Now the button scan and hpScan is gone!

  I need to analyze things. What should I do?

  Hey @thesakuratong,

  I understand that you have a problem scanning to your Mac OS X 10.9.2 OS of your HP Photosmart e-all-in-one 5520, printer. I would like to help you today to solve this issue analysis and recovery of your HP software on your computer. Can I have it please execute step by step troubleshooting below.

  Step 1: Uninstall the drivers and software:

  1. From the desktop, double-click Macintosh HD, and then click Applications.

• Photosmart D110a driver problems

  Hi all

  I have a HP Photosmart D110a. I came across some printing problems (always said it was looking for printer, never found), but I had not being updated or changed something, it just happen out of the blue.

  I deleted my drivers, thinking I could easily find them online. I don't have the CD. I am running OSX Mavericks. My printer says it is connected to my network wireless, but when I try to add the printer in System--> Printers Scanners preferences &--> + it does not detect. There seems to be no download of driver software available on the HP site, that instructions on how to download updates from the update on Macs, which is not good because it is said that there is no available.

  Does anyone have any suggestions? Desperate here.

  Hi thuffman,

  I've worked with a lot of other help get the HP printers installation and in collaboration with the Mavericks. You are right, for the moment there is no full software features and driver for the D110a, but with a doubt be able to add the printer.

  You said when you try to add the printer "it does not detect", I just want to clarify that. The computer does not detect the printer or the computer does not detect the driver?

  As I understand it, I suspect that the computer does not see the printer at all which means that the computer cannot be on the right side of the network. You said that you have confirmed that the printer is on the correct network, have you checked the computer network? If the computer is located on the right of the network may try to turn off the router, the device from Apple and HP printer.

  Follow these steps to turn off the router, Apple and the printer device.

• Printer HP Photosmart B109n-z problem

  Last week I bought a new printer, photosmart B109n-z, installed wireless on my PC and installed with the USB on my desk. All good works, earlier, I often lose my internet connection on my deskto. Have to unplug/plug the internet cable again in the assessment and to reset the router, then works again... But before the installation of the printer I never lost connection with the internet. Is there a solution for this? With the laptop, no problems...

  (router: US Robotics; operating system: Windows xp sp 3)

  OK, the US Robotics router is a DSL modem/router?  What is your or your ISP?

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 192.168.1.100 a.199 we will use 192.168.1.220
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the gateway and DNS white.

  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Photosmart 5520 Warmup problem

  This is my first post, so I can't do this properly. I have a HP Photosmart of 5520 is almost a year. It worked fine until a couple of months. It is connected to a desktop computer using the AMD operating system. The problem is probably easy to fix so that's the problem. When I turn on the HP 5520 he starts his usual warm-up procedures. After about 30 seconds, the problem starts. The problem is that the printer prints a color image full page of a screenshot of one of my games in the computers memory. It's wasting a lot of expensive ink. If anyone has had this problem and if so how is it corrected. Thank you

  Hello tech - 1946 and welcome to the forums of HP!

  I'm sorry to hear your 5520 Photosmart was the impression at random, but I will certainly do my best to help you find what's happening

  Initially, I wonder, is it something that you tried to print before or never thought so that it can be printed?

  Have an AMD processor, I am assuming that you are working with a Windows operating system, then what version of Windows you have?

  If you unplug the printer from the computer before starting the printer, it still trying to print the page?

  If you have not configured the ePrint feature on your device or really added many personal setting, I would recommend restoring the printer to its default settings (to erase from memory) and then let me know if the problem persists. To reset the default settings, select Setup, press tools, and then click Restore Defaults.

  I hope hear from you soon!

• With HP Photosmart 7525 driver problems

  Hello, I had problems with my printer. All first whenever I need to print something it gives me an error saying: failed to connect to the printer. Even with a sweep. I have to restart my router to make it work. I have however found no difficulty analysis. I ran doctor scan and it came to pass in the section problems with sadki Scan and driver to check. Please say suggestions.

  Hi @TheFatCrafter ,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your printer HP Photosmart 7525 and connection problems.  To get help, I'll need to know more information:
  Is that the printer is connected wireless or Ethernet to the router?

  If the power cable is connected to a surge protector, or directly to a wall outlet. Emits when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.
  In the meantime, I suggest trying the following

  Uninstalling the printer software.

  Re-install using the HP printer install wizard for Windows.

  I hope this helps.

  Thank you.

• Add Photosmart C410 device problem

  I'm having trouble installing the device for my photosmart HP C410 printer/fax/scanner. I use a wireless connection. The printer is visible on the network, but when I select the device and continue I get the error message: "printer setup is a not complete."

  The problem was caused by a conflict between the C410 Photosmart install the software and the HP Client Security software.

• Photosmart C310 wireless problems

  I have a HP Photosmart C310 and O2 Hotshot wifi device. Printer test report ot the network is connected and the printer has been installed on my Dell laptop. Printing works fine when I use a cable but the laptop cannot find the printer when I try wireless. When I brought the package in the store where I bought the printer, he tried connecting to the top through their wifi - who is with Eircom - and it worked then. But when we set up return to the Hotshot it wouldn't work again. This problem can be resolved, or the devices that I use are not suitable for wireless printing?

  Your Hotshot cannot allow communication from client to client.  Each customer probably only has direct access to the Internet, not to each other.

  Contact the manufacturer of Hotshot for more details.

• HP Photosmart 7520 network problems

  I tried to install recently the photosmart 7520 on the network at my place of business. It seems to connect to the wireless network, however, only computers on the network share, who can see this printer are those who are connected to the network via an ethernet cable. If the computers are connected to the wireless network, they do not see the printer, nor can they ping the printer with an error of "destination: hostunreachable. Everyone knows this error? This is probably a router configuration, but do they know that we, or how to fix it?

  Thank you

  The problem you are experiencing is Ethernet and wireless. The printer will not be able to connect with BOTH at the same time. The printer and computer that you are trying to print from, must be on the SAME NETWORK. If you are connected to Ethernet, the other must be.

  You can print wireless, USB, or Ethernet and USB. It will not be able to print wireless AND Ethernet.

• Photosmart AIO 5524e problems on Windows

  Hello

  My 5524e Photosmart AIO does not work under Windows. My documents are all screwed, Pages print half page. I tried the solutions as much as I can think, different versions of Windows, drivers, firmware, different types of applications and so on. As wel on usb wireless connection.

  Strange thing is that on Android and Linux, my impressions are good.

  Anyone familiar with this kind of problem?

  Greetings and a good weekend.

  Hi RiconX,

  Welcome to the HP Forums.

  I see you are having some printing problems when you attempt to print from Windows.

  So I can better help you, please answer with the operating system that you are running:
  Operating system Windows am I running?

  Email me back when you have time and I look forward to this research question.  Once the suggestion I have is, if you please disable and firewall or anti virus protection you can be running and restart the computer.  When the computer is back on, try a print job.

  Thanks for your time.

  See you soon,.

• HP Photosmart C4580 Wireless problem - Snow Leopard

  Hello

  My HP Photosmart C4580 has worked for wireless (albeit a bit slowly) until I made 2 changes:

  (a) I changed my router SSID (network name) and password

  (b) I have upgraded from Leopard to Snow Leopard

  At first I tried to use the HP configuration utility to reconfigure the network my printer wireless.  It doesn't not work - he told me that my printer to be connected via USB, while he was already.  I tried different things and ended up reset wireless to the printer (using the printer menu).

  Then, in the HP that I read that HP utilities do not work with Snow Leopard help files.  But the instructions for wireless network with my snow leopard printer did not work.  I could install my printer via USB (and downloaded driver), but it does not appear on the list without wire.  I couldn't find a way to configure wireless with USB connection, as I already had when I initially set up my printer with Leopard.

  Video instructions to set up wireless for Mac (http://h30434.www3.hp.com/psg/board/message?board.id=Macintosh&thread.id=231) seemed promising, because it would finally give me a chance to give my printer on my network information.  Wireless Network Test report gives the network name (SSID hpsetup) (since I have reset the settings), that I found promising, although only under IP address, he said 'not applicable' (and obviously fails it test under 'Network name found' failed-it).  However, my macbook can't take any hpsetup network and on the network Page Configuration I printed the network status is 'offline', Active connection Type is None, URL is 0.0.0.0.  Apparently my printer cannot connect to this network hpsetup.

  I have spent a few days on this and I am completely at a loss to know what to do.  Can someone please advise?  Thank you very much.

  OK, we can solve the problem.

  First you uninstall the 10.5 HP software before installing 10.6?  If this isn't the case, we might as well do it now.

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt, as well as Apple and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled, this is why we do not run this thing all the time)
  Click on continue
  Let the cleaner it is.

  Then, remove the printer in System Preferences, Print & Fax.

  After that, go to hp.com and download the 10.6 complete package

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=OJ-74785-1&LC=en&DLC=en&cc=us&lang=en&OS=219&product=3418707

  Having attached to the C4580 usb cable and select Wireless when you can.  Follow the rest by.

  I noticed problems where people have "special" characters in their password wireless.  If it fails, and you have no alphabetic characters or digital, you will need to go through the process of hpsetup ad hoc, as detailed in the video you mentioned.