Photosmart HP 7510: printer problem

I had problems with my printer/scanner. All of a sudden, it stopped working and I tried numboo points. Upgrade to the latest version of Windows, uninstalling and reinstalling the printer drivers. Why it won't recognize my printer. I used to be able to print wireless from my pc and also my cell phone. I am not able to print at all. Please advise I should do as I have already spent many hours trying to solve. It worked a few months ago. I have a Gateway computer AMD Turion II x 2 P540 processor.

Thank you

J

Hello

Thanks for your comments.

Here are some troubleshooting wireless;

Troubleshoot wireless
1. make sure that the printer is not connected to the network via an Ethernet cable
Wireless does not work if the printer is connected to the network via an Ethernet cable. Unplug it
Ethernet cable from the printer.
1. make sure that the wireless light is on
If the blue light on the printer control panel is not lit, wireless can be disabled. To turn on the radio, touch
or drag to the bottom of the tab at the top of a screen to open the dashboard, and then tap (wireless), touch
(Settings). Tap Settings wireless and then tap wireless to activate it.
If the blue wireless light is flashing, it means that the printer is not connected to a network. Use the wireless configuration
Wizard available from the Control Panel printer to establish a wireless connection. Touch or drag to the bottom of the tab to
the top of a screen to open the dashboard and then tap (wireless), press (settings). Touch wireless
Settings, tap the wireless configuration wizard, and then follow the instructions on the screen.
1. make sure that the computer or mobile device is connected to the wireless network
Make sure that your computer or mobile device is connected to your wireless network. If you cannot connect the
computer on the network, contact the person who set up your network or the router manufacturer. It could be
be a hardware problem with the router or computer.
1. reboot the wireless network components
Turn off the router and the printer and then turn them back on in this order: router first, and then click Printers.
Sometimes, disabling devices and then turn their back on helping solve the problems of network communication.
If you still can not connect, turn off the router, the printer and the computer and then turn them back on in this
order: router first, then printer and computer

Still problems? Visit the HP (www.hp.com/go/wirelessprinting) wireless printing Center. This Web site
contains more complete information and up to date on wireless printing, as well as information to help you
Prepare your wireless network; solve problems when connecting the printer to the wireless network. and solve
problems of security software.
Note: If you use a computer running Windows, you can use the tool HP Print and Scan doctor, which can help
solve many problems, you may have with the printer. To download this tool, visit www.hp.com/go/tools.

Hope that helps.

Tags: HP Printers

Similar Questions

  • a photosmart HP 7510 printing directly on a cd does

    A photosmart HP 7510 printing directly on a cd does

    Thanks for any help

    The all-in-one Photosmart 7510 does not support printing on CD or DVD.

  • HP Photosmart B109n-z (printing problem) Please help

    Hi all

    I have the HP Photosmart B109n-z printer and put up wireless and it works fine I had no problem with him.

    The other day the black ink stopped working - the cartridge is not empty but it's is no longer black prinking on all documents.  Since I put all new cartridges in, he acknowledges them all, including black, and if I print something like a word document, and then it moves as if printing but the page comes out blank - no black ink is used.

    I work for myself, and work at home, it will get this resolved as soon as possible.

    I checked the cartidge - it's good.

    I checked the connection and the Bay print cartridge - they are clean.

    Help, please.

    The color works fine.

    The issue of black ink is the same print, scan or copy.

    And I have tried turning everything off and on again!

    Hello

    You could try the Solution 5 in the document troubleshooting that I am a link here:

    Quality of ink troubleshooting

    This will show the colors that are printing.  There are also additional troubleshooting steps to follow

  • photosmart HP 6520 printing problems all in one.

    I have a printing problem.  I can print a test page, no problem.  When I try to print anything else, there is a msg of error and nothing prints.  I know there is communication between the printer and the computer.  I can scan.  Why it will not print documents?

    Hi kimmarie52,

    Welcome to the HP forums

    I'm sorry to hear you have had printing problems with your 6520 Photosmart but once I put together a little more information, I'd be happy to help you!

    1. what operating system you have?

    2. how the printer is connected to the PC? USB, Ethernet or wireless?

    3. What is the error you get when you try to print?

    4. have you tried different programs to ensure that it is not related to the program?

    If you work with Windows, I would suggest that you download and run the printing HP and Scan Doctor while I wait for your answer to see if it can help. If it fails anywhere, let me know where.

    I hope hear from you soon!

  • HP B210a Photosmart and iPad2 printing problem

    Hello.
    I just bought the B210a for my iPad2 wireless printing. I joined the printer properly to my W - LAN network (as far I can tell there is no problems with the WPA or IP) and implemented by following the instructions in the manuals. I had no problem printing from my PC. My iPad also recognizes the printer without problem. But when I try to print from my iPad (on Safari and hp iPrint) the printer does nothing. HP iPrint starts the race printingprocess for a few seconds and then tells me something from (excuse me, I have to translate it from German) as "possible within printing problems. Check the printer for more information". My printer does not show anything.
    -The report says it all test is successful, the quality of the signal is fine, the identifier SSID is correct, MAC, IP address, DHCP, infrastructure, WPA - PSK and automatic encryption (AES)
    -in my router configuration screen, the printer has been Born as a networkdevice with IP address
    -MAC filtering is turned off
    -W - LAN mode is 802. 11 b/g to channel 13
    -WPS is disabled because it caused problems connecting the iPad to W - LAN
    -My iPad is also in the W - LAN, network and can access the internet through a router
    -I can't acess the printserver B210a via the IP address of my PC's built-in
    -all devices are in the same subnet 192.168.1.xxx
    -J' have already disabled the power of my iPad, printer and router and got no result

    I hope you can help me. Thank you.

    I just found the solution: I just had to restart the IPad2 (hold both keys). Now, it works fine.

  • Photosmart HP 7510 - printer

    I install the HP Photosmart 7510.  The wireless connection is good with a signal strong.  Router is a Cisco Wireless-G.  I am running Windows XP.  I rebooted with the firewall disabled, but continue to receive the error message "Cannot find the printer" after entering the IP address displayed on the status page of the screen of the printer in the network.  I also tried to use the SSID, but it is not with anyone.  On-screen help and troubleshooting with the online manual were without help.  Does anyone know how to fix this?  Thank you.

    Thanks a lot for all your efforts, Brent.  The diagnostic tool was not able to locate the printer... that we already knew was the problem (lol)... but he did not offer a solution.

    However... I have success!  I'm going to blame for the fact that it is late and I'm tired because it appeared fleetingly unplug the router and the printer and restart earlier, but I don't.  I finally did it, at the time of frustration.  Well, the printer is now running.  I feel like a bit of a jerk, but at least I can go to bed now.  Thanks again!

  • Photosmart 5520: Photo printing problem

    I've just set up my new printer wireless to my PC and my ipad with no problems.   I just printed photo of

    both using HP photo paper supplied with the printer, but the quality is terrible!  The ink is running in all directions and

    take ages to dry, the colors are facing eachother, what makes the image completely garbled.  I'm not a fool!, I have

    used various brands of printers over the years and found that the installation of ink cartridges is similar regardless of the brand.

    I checked then double that they are clicked in place firmly.  I followed all of the implementation procedures.

    I'm doing something wrong, or should I just try a different type of photo paper?   Printing simple text on A4 is fine.

    Hi @mum50,

    I think you are something! I suspect that the problem is probably related to the book, but it might be better to use the following document to completely solve the problem: the problems of quality Print to the HP Photosmart 5520 e-all-in-one-HP Deskjet Ink Advantage e-all-in-one 5520, Printer series.

    Please let me know the results of your efforts. Thank you!

  • Photosmart HP 7510: fax problem

    I receive a notice of "loss of wireless connection" when I go to efax. The WiFi signal is strong and I can print, scan and receive faxes without any problem. I can't just send faxes directly from the device. Thank you

    Hello again @wesmeck,

    Thanks for the clarification!

    At this point, I would recommend you give our Cloud Services phone support a call directly.

    You can contact them at the 1-855-785-2777.

    Good luck!

    Thanks again for posting.

  • Photosmart D110: Wireless printing problems - printer is not found

    Never had problems before - now, my laptop (macbookair) can't find the printer.

    Network Setup page Test report wireless and HP are both fine.

    Connecetion doesn't seem to tbe the problem.

    Hello

    Try to remove the printer and then add it again by opening the Preferences tab and then selecting «printers & scanners»

    From there, click on the sign less under the printer icon to remove the printer and then add again using the sign.

    This is often useful if you are currently outside experienceing printer issues regularly.

    If you still can't find the printer, I would try the steps with connected usb and if a connection is established, delete it.

    If the problem persists, restart your mac and try again, and if this does not help, then restart your router also.

  • Photosmart 7520: cartridge printer problem

    There are 5 locations of the cartridge in the printer, and I never had no problem with cartridges before that.  Four of the five slots hold what I describe as 'slim' cartridges - 3 color, black. The fifth housing contains a cartridge slightly wide, black - 564/XL with an icon that looks like a hexagon.  I put all the cartridges match to their icons. The combo or one package of 564/564XL I bought do not contain the black cartridge "slim."  Icon on it looks like the 'open doors' on a lift - in opposing arrows. 564/XL certainly does not fit the slot (position left-most). So while 4 out of the 5 was inserted and "snicked" well put, I get the message 'lack cartridge' and I get this - I am missing a cartridge! I'll go back to the store and ask for help, but what don't get me? I bought the combo packs before and got just what I needed.

    Hi @JMA1961,

    Welcome to the Forums of HP Support!

    I understand that you did not correct black cartridge in the pack that you bought. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I understand how frustrating it must before you. To clarify, it depends on where you buy the combo pack, if she would have the black cartridge include. Please check the box for more details.

    NOTE: Depends on the retail store, whether or not it would be included.

    • The cartridge that described you as "open doors on a lift" is the black photo cartridge, which has the symbol bowtie on him. This cartridge can only fit on the side of the extreme left of the printhead.
    • The cartridge on the right side is the main black cartridge that has the shape of a Pentagon on the subject.  This cartridge only fits on the far right of the print head.
  • HP Photosmart 3300 series printer problem

    1 printer is not fully recognize black cartridge HP.

    2. request for info on the forum and the response that the thread has been moved. Clicked on the Web site, but not be able to access the news.  Help!

    Your question has been moved to the forum hardware and drivers , where he received a response.  Here it is:

    Printer HP Photosmart 3300 Series no longer recognizes full HP black ink cartridge.

    Boulder computer Maven
    Most Microsoft Valuable Professional

  • HP Photosmart Plus B210a printing problem

    I recently bought a HP Photsmart Plus all-in-One Printer B210a and find that I can't customize the size of the paper or the envelope as I could with my Photosmart C4480 printer of old.  This seems silly to me.  In addition, I can't find a helpline for this device.  Would be grateful at least this last!

    Hi jhgodfrey,

    If you live in the United States / Canada, you can call our technical support at the following number 800-474-6836. If you are outside the United States, click on the link below to get help from your region number.

    http://www.HP.com/cgi-bin/hpsupport/index.pl

  • HP Photosmart 6525 - tune printer problem after Installation

    Hi - I just bought and installed an HP Photosmart 6525 (connected via wireless), for use with a desktop computer HP running Windows 8.1.  I select the HP Photosmart icon on my desktop that opens the HP printer Assistant - however I get the following window:

    C:\ProgramData\HP\HP Photosmart6520 series\HPUDC\HP Photosmart 6520 series (network)-UDC_Install.json

    C:\ProgramData\HP\HP Photosmart6520 series\HPUDC\HP Photosmart 6520 series (Network) \UDC_device_2.json

    I click on the OK button - another window pop up opens with an additional line:

    C:\ProgramData\HP| Series\HPUDC\HP Photosmart6520 HP Photosmart 6520 series (Network) \UDC_device_2.json

    I click OK - the HP Printer Wizard is blank with a "string not found" poster.

    What is the cause of this and how to fix it?

    Thank you

    Robert

    Hello Robert, I hope you are well!

    I understand that you see a pop up window after you install the printer software. I have a guide that contains a patch, I would see you for that matter: HP Printer Wizard opens with an error in Script or in Notepad

    If the patch does not help, try to uninstall the printer software and put it back again by running the HP printer install wizard for Windows.

    Happy Monday

  • HP Photosmart Premium C309n printing problem

    My printer is giving the error message of "paper in paper tray" but tray is actually responsible. I tried to unload the shelf and reloading, but the message is still there. I tried the photocopy but still the same message. I tried to print photos on photo paper and still the same message. I also tried to print only an analysis of ink for my printer and even that won't do. I changed my computer from an HP to a Mac... can this have anything to do with it at all? I was able to pair my router wirelessly with the printer, so I'm good wireless. Thanks for any help.

    If the device is even having this problem when copying, then maybe it's a problem with the hardware, paper sensors or the internal firmware that controls the sensors.

    There is a document with the steps to solve a paper located hereerror output.

    Let me know if it helps.

  • HP Photosmart Plus - B210a printing problems

    My photo printer prints now all my photos in red.  First of all, this occurred when the ink cartridges were low.  I replaced the time and the Red pictures disappeared.  When photos started printing in red, I have replaced all cartridges with HP ink cartridges and made sure all cartridges have not all the bands on them to restrict the flow of ink, but still to print photos in red.  I also cleaned and aligned printheads several times but the problem persists.  By tools, my ink levels is now up to 50 percent of the Red photo printing.  I use photo paper bought at Costco, which is the same paper used when the images did print correctly.

    What should I do for the photo printer to get the pictures to print correctly?

    I don't know exactly of what has caused the problem, but I have speculations. It is possible that the ink pipes have stamps, air preventing the ink being subject to a push of the ink cartridge for the print heads. That's why it took 2-3 printheads clean processes to get the ink out. Another possibility is that the print nozzles are blocked and the print head cleaning process after several tests. Regarding prevention, the only thing that I could think off is to make sure to use the power button when you want to turn off the printer. This is to ensure that the print heads is capped correctly to avoid the obstruction. So basically when you get the power failure, be sure to turn on the printer as soon as you get back power. Run a clean print head immediately.

Maybe you are looking for