OfficeJet pro 8600 paper tray slides not well

Similar Questions

• You are looking for 8600 OfficeJet pro replacement paper trays

  Where can I buy replacement bins to printer OfficeJet 8600 Pro Plus paper?

  I'm looking NOT for the paper to Add on tray, but a replacement for the main tray. Mix us different types of paper and envelopes in and out of the state bar throughout the day, and instead, we would like to keep several loaded additional bins of specialized paper to reduce the wear on the main plate.

  Suggestiosn?

  Thank you!

  I searched in the online stores available through HP and was unable to find this part.  However, I could see the part is available through the HP Technical Support by calling in.

  Click here to access the complete list of HP Technical Support phone numbers.

  The reference is more CM749-60036 for Assembly of the main tray for the Officejet Pro 8600.  This part is currently around $25 usd, but the prices are subject to change.

  I hope this helps.

• HP Officejet Pro - second paper tray 8600

  My Officejet Pro 8500 Premium printer no longer works. Bought a new printer Officejet Pro 8600, the basic version. Is it possible to reuse the 8500 second tray paper on my new printer?

  I can't say with certainty, but a couple of data points suggest 'no ':

  • The part number for the 8600 Officejet and Officejet 8500 extra paper tray are different.  The Officejet 8600 extra paper tray is the CN548A, the 8500 is CM759A.
  • I have a 8600 Officejet with the additional target bonus and an Officejet 8500 has without the tray extray.  I tried to put the tray on the 8500 a 8600 and it didn't fit.

• HP Officejet Pro 8600 - Paper copy on the glass of the scanner, Officejet tries to copy the ADF

  I'm trying to copy a document on my HP Officejet Pro 8600.  I placed the original face down on the scanner glass.  There is no original in the ADF.  Then, I pressed "Copy" and "launch in black."  the Offficejet then "think" the original is in the ADF file and try to copy a non-existent original.  The Officejet then generates a paper jam «»
  in the ADF file' error message with instructions to clear paper jam and press 'OK' and spews a piece of paper from the paper tray. There is not an option for 'back '.  If I try to humor the Officejet by opening and closing the cover of the ADF and pressing 'OK', the Officeject generates a copy which is covered with black ink.  If I ask preview copy o, the document on the scanner glass is displayed.  I can adjust margins, etc.  When I select then 'copy' and 'Black start', the Officejet is trying to copy a nonexistent document in the ADF and generates the "Paper jam" message again.  Since there is not an option "go back", I turn the printer off, then turn it back on, and then try again.

  How do I train me or the Officejet for copy of the scanner glass when the original is located on the glass of the scanner NOT the ADF?

  Thanks for your help to solve this frustrating problem.

  Hi Knitter507,

  Try to do a hard reset as described in the following link.  Click here

  If that doesn't help, can you print a printer status report and give me the a.) Product # and B.) Version of the firmware of the printer?  To print the report, press on the arrow to the right on the screen of the printer control and then configure / reports / Printer Status Report.

  What is the operating system for your computer?

  You are able to make a hollow photocopy the ADF?

• HP Officejet Pro 8600 Premium: Tray Lock worked until the upgrade of Windows 10

  Since a year now, I have 1 locked drawer for our book of receipt only, easier than all the other printing set to automatically select the default tray to tray 2 (Tray 1 is locked and all)! But I tried the upgrade of Windows 10, that was an epic fail and my cpomputer was sent to the doctor for the day. When I came back I had to basically start over with a new computer. I have everything back to be better than before, but THIS problem! Receipts in Tray 1 and my payment software its configured for Tray 1 specifically for receipts. All other default things that select and always tray 2. I can't anything out of tray 1. HOWEVER, my boss's computer is on a network with it and when it prints a receipt from his computer he properly dispences Tray 1. Yet.

  Help! PLEASE, I BEG YOU!

  Lacey!

  Hi @L2thaJ,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print correctly on tray 1 on your HP Officejet Pro 8600 Premium e-all-in-one printer. I will definitely do my best to help you.

  Is the other computer Windows 10 institutions, who works for printing on tray 1?

  It looks like Windows 10 and the software you are using does not work with the printer driver, what might happen.

  You are able to print to Tray 1, when printing from MS Word or Notepad?

  Please ensure that you use the latest printer driver for your printer.

  Download and run The printer Installation Wizard. The HP printer installation wizard detects automatically the best print available for your HP printer driver. It is only available for Windows 7, 8 and 10.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Officejet Pro 8600 more print but not scan

  I have an Officejet Pro 8600 and I use Windows 7 Ultimate (64 bit) and it print and copy but will not scan. I had a hell of a time trying to get this thing to scan - I even spent an hour and a half with HP technical support and they could not fix it and finally gave up and call me Micro$ oft said that it must be a windows problem (Windows is up to date, incidentally).

  I tried to open the scanner software and nothing happens when I click the icon - the loading icon flashes for a second, then only the mouse pointer. Nothing happens if I try to boot from all programs. Nothing happens if I try to scan to the computer of the other printer told me the failure of sweeping and that there could be reasons of severalpossible (unrelated, software used, etc.).

  I have installed and uninstalled. A couple of times he was having trouble with the installation, but finally got it connected. Once it would not uninstall in Control Panel until I did it directly from the HP folder. I connected it by USB and wireless. I installed the version of bloatware. I cleaned that out and I tried the only version of drivers. The HP support person had me go and removed a bunch of stuff in the registry. I tried to run as an administrator. Nothing works. I even tried to scan using Windows Fax and scan. I disabled Kaspersky and made sure that my firewall is turned off.

  I am at my wits end with this and certainly regret my purchase at the moment. Help!

  Hello, it happens to the analysis of Windows (WIA) and generates an error:

  "The Windows Imaging service does not work... If the problem persists, you will not be able to scan using the applications that use this service, such as Microsoft Paint. Scanning software HP could still work. »

  It asked me to restart, and then re-run the diagnostic tests, but I got the same result.

  Then, I jumped to HP Scanner Twain and got another error:

  "The Twain component is not working properly because the product is used by another process. Save your work and close all applications. Turn the product off, turn it on again, and then click on restart and repeat the test. »

  He told me then the problem persists to uninstall the software, then reinstall the Full Feature software (I did, but available).

  * EDIT

  Problem solved!  After you had me run the diagnostic tool I googled the WIA problem and found that many other people had the same problem. A person has a response from Micro$ oft saying that it was a Windows 7 issue and how to fix it - this is the text I found:

  To start the WIA service, you need start all services of dependence. To start the dependency services, please follow the steps mentioned below:

  -> > click on start-> type "services.msc" and press ENTER, once you get up the services window, please do the rest steps.

  -> > first check and write down all the dependency services: -

  -> > right WIA-> properties-> tab dependence, check the services of name listed there.

  It must contain the following services:

  * RPC remote Procedure Call

  -> > DCOM Server process Launcher

  -> > RPC end point mapper

  * Detection material core

  Make sure that all of the above services are started in the services list.

  Last time, we started the Detection hardware Kernel, which solves our problem.

  (Andy, it's important.  Choose "Detection hardware Kernel ' and start this service which should start your 'Windows Imaging Acquisition '.  If it does not then select WIA and change the departure to "automatic".  This fixed my problems) after all dependency services start, please try to start, WIA service to solve the problem of .                                                                                                                                                                                       

  (For those who are doubtful with computers, like me, when you click on the start icon, you can type services.msc in the box of research programs or click on run and type it in there). Once inside the list of services, you can look at the dependencies by right-clicking on the Windows Image acquisition service and selecting Properties. Take note of these dependencies. Then back to the main list and watch to see if these dependencies are started. My Shell Hardware Detection says disabled, so I right click on it; However, starting selection is grayed out and I couldn't select it from the drop-down list box, so Startup type I selected Automatic, apply, close the Services window and then started my Scan software and presto, it worked.

  Thanks for setting me on the right track!

  
  

• Re: HP Officejet Pro 8600 Plus print but not scan

  I'm on Mac OS X 10.6.8 and recently bought an OfficeJet Pro 8600.  It worked fine for about a month, and then we moved into a new House.  Now, it print but not scan to computer.  It scans email fine.  Same problem wired or wireless.  It is said the computer Scan is not enabled.  When I try to activate scan to the computer using the HP utility, he runs for a long time and then says that the connection has been lost.

  Hi mpk1969,

  Mac OSX:

  Try the following steps.  If you want to learn more about your product, click here.

  How to perform a scan: OS X v10.8

  1. go to the HP utility to 8600 of (Preferences system, scanner open, click on the utility tab)

  2. under scan settings, click scan to the computer

  3. make sure that a check mark beside enable scan of the computer

  4. click OK in all the dialog boxes and of proximity

  5. try scan of front panel

  Follow the steps below

  1. open System Preferences

  2. Open Print & Fax

  3. in the white box under printers right-click and select Reset Printing System

  Note: resetting the printing system will remove all printers in the print queue

  4 restart the computer

  5. Open Print & Fax and then click the + to add the printer to the print queue

  6. open the HP utility, and then click Scan to computer to make sure this option is

  Try scanning the computer to the printer and let me know what happens?

  Windows:

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

• OfficeJet Pro 8600 desktop shortcut does not open

  Het all. I just replaced my old HP 4180 with a new Officejet Pro 8600. We have three computer that connects to it, and the shortcut on the desktop to open the software of the printer communication does not work only on your laptop. I used the installation of itentical on all computers. The Office has the full package software and two laptops have only the basic print and scan package installed. I checked the target of the shortcut on two laptops, and they are identical. I also tried to disable the antivirus and firewall software, but that made no difference - still unable to open the software to set the printer preferences, etc.

  The laptop in qiestion is an EeePC H1000 running XP 32 bit, SP3. BTW, the laptop that has no problem is an identical unit.

  When I select the shortcut, the hourglass appears for a few seconds, the wireless icon flashes as it appears that the software is attemptong to connect to the printer, but the window indicating that it is retriving the device information will never appear and therefore also the printer wizard window also never appears.

  There's no problem with printing. Just get the Printer Wizard to open. Also for the record, if I select the printer in the Control Panel printer and faxes section, can I get the printer properties and preferences windows and make changes, but no way to get the companion window.

  I tried to reinstall the HP software without change. I also tried a "repair" and also no change.

  Any thoughts appreciated as to what else to look for that may be causing my problem.

  Finally, find my own solution. I followed the instructions in the Support Document HP c03640384 HP Printer Wizard opens with an error in Script or in Notepad.

  Even if it wasn't exactly my problem - I was just getting no response at all, - using the patch of registry (for my WinXP) of this document got my desktop shortcut does not work to open the Print Wizard.

  http://support.HP.com/us-en/document/c03640384

• HP Officejet Pro 8600 Plus tray 2... to be configured.

  Is it possible to select the Tray 1 or 2 as a default value with HP Officejet Pro 8600 Plus? Thanks to all of you who have experienced the ability of tray 2... to be configured.

  Fred

  Here is a document with information about printing from tray 2:

  http://support.HP.com/us-en/document/c03073416

• HP officejet pro 8600 - Printer Wizard does not start on windows 7

  HP office pro 8600 and assistant to printer on windows 7 32 bit.

  Hello, I need your help because when I try to open the wizard in the printer on my pc, nothing happens.

  I reinstalled several times the software but nothing. The same software on a laptop all work very well.

  The two laptops are windows 7 32 bit.

  Thanks for the support

  Saverio

  You are welcome.

  Try to install the following fix, you hsould not see whatever happens... :

  http://support.HP.com/us-en/document/c03640384

  Alow one or two minutes and try to run the software again.

  Please let me know ig that can help.

  Shlomi

• OfficeJet pro 8600 output tray

  How do remove you the output tray for legal size paper.

  Hi columbia530,

  You should be able to extend the output tray on the legal situation. If it seems to be stuck, you may need to push in, then spring one or two times to the release. Be sure and be careful when you pull the tray does not break the flap at the end of the output tray.

  

• HP Officejet Pro 8600 paper Premium - Legal Issues

  This printer supports legal communication, and it prints on legal paper but:

  (1) I am unable to get it printing double-sided paper legal?  I thought he did it?

  (2) the album paper Manager (were the printouts) says he's set to A4/Letter but what print legal paper, the document of clusters to the top where is spell.  It seems that this must slide to accommodate legal paper, but I can't figure out how to do this?  The end result is that of legal paper jams their output.

  (3) I had set up the printer so that the Tray 1 (top) letter-size and tray 2 was legal.  Unfortunately, in the order of the printer print on legal paper I had to put the lower shelf as the default tray (it does not automatically detect letter / legal) and once I did that it won't return to letter-size (even by resetting the default to the letter).   The only solution I found was to install the legal on tray 1 and the letter on tray 2.   Is it a software error?

  Thank you...

  Hi, the 8600 is printing double-sided legal impossible.

  

  The 8600 does not automatically detect the type of paper in the tray (s).

• HP Officejett Pro 8600: paper jam

  I have a paper jam and I cannot fix it after viewing the video of HP.  The paper is visible from the front and after removal of the duplexer.  The book seems to be tightly wound around the roller.  I can't go out fron the front and it's wrapper around the roll, when I look at the back.  Any suggestions?

  Dottie

  Hey @Dottie11,

  I see that you have some problems with a paper jam in your 8600 e-all-in-one printer Officejet. I can help you with that, but it is not a lot that can be done in this situation.

  If the printer is still under warranty, I suggest to contact the HP Support by clicking on this link and fill out the form below.

  If the printer is out of warranty, the best I can do is suggest more strength or cutting paper with scissors. Those who are not HP recommended troubleshooting steps and HP can not guaranteed that they will help with the jam, but it's the best I can do.

  Please let me know the results after following the above. If you clear the jam or come up with a solution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Officejet Pro 8600: paper feeding problems

  Help!   My printer has all of a sudden decides to try to feed a bunch of paper at the same time, ruining the leaves.  May 6-12 pages.

  I don't know the terminology to search for this problem.  There are times when paper changes (for example the new color), but not always.  Hate waste, hate to lose the County. Should I clean something?

  Welcome to the HP community @macandsons!

  I came across your message on several pages of food through your Officejet 8600 and wanted to pop in to help. I would like to see you link below and try the steps in the order for that matter. Generally a good cleaning roll will help this type of concern. If you still find the printer pull in several sheets of paper, then I recommend finally call phone support to talk of a replacement printer.

  More than one Page at a time feeds through the printer

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Have a nice day

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

• OfficeJet pro 8600 more tray insert noise

  Reintegration of the paper made a terrible tray noise of cracking, as if we need to plant through a barrier.

  Hi columbia530,

  Can you take a flashlight and look in the printer to make sure that there is not an obstacle in the printer?  I reinstalled a paper on an 8600 tray here in the office and it has been pretty smooth.  You see anything out of order?

  You can also watch the status bar carefully to make sure that there is not a piece.

  Is - this tray 1 or 2?