Play preroll when recording

Similar Questions

• The videos are blurred when recording a DVD or a hard drive, but in Windows Movie Maker

  I converted videos from my Flip HD MP4 to MP3 Mini to allow me to use them in Windows Movie Maker.  When I play my movie in WMM, everything is great!  When I burn on a DVD or save it in another way outside WMM images and music are perfect, but the videos are grainy and blurred to the point where you don't see any!  When I converted them, I used an AVI format as it was the only one who has produced clear videos for download.

  I converted videos from my Flip HD MP4 to MP3 Mini to allow me to use them in Windows Movie Maker.  When I play my movie in WMM, everything is great!  When I burn on a DVD or save it in another way outside WMM images and music are perfect, but the videos are grainy and blurred to the point where you don't see any!  When I converted them, I used an AVI format as it was the only one who has produced clear videos for download.

  =================================
  The following links may be worth a visit:

  Movie Maker and Flip digital camcorders
  http://www.Papajohn.org/mm2-CamcordersFlip.html

   

  Since a Windows Movie Maker Flip video camera

  http://www.brighthub.com/multimedia/video/articles/1402.aspx

  Might be worth trying to convert your MP4 files to the
  Before you import into Movie Maker WMV format.

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  If the resolution of your finished video file is always
  unsatisfactory... you can watch in the use
  Custom settings.

  Windows Vista
  Create custom movie settings
  for Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-custom-movie-settings-for-Windows-Movie-Maker

  There are some profiles which can be copied from
  the following site that will work in Vista Movie Maker:

  Personally, I use the profile .wmv
  When recording movies.
  Slide show-1024x768WMV9

  Download from the following site...

  Movie Maker 2 - economy
  Movies - profiles custom WMV
  http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.html

  Right click / Save as... drop in the following folder:
  Folder of C:\Program Maker\Shared\Profiles Movie
  (if there is no record of profiles... you will have to create it)

  Choose "Show-1024x768WMV9" when you publish (save)...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• noise problem Windows movie maker 2.6 when recording in dv - avi format

  I installed the filmmaker windows 2.6 on windows 7 Home premium. Everything works fine. When I try to record the final film in DV - AVI format, I get 5-7 seconds of noise very high height introduced where ever there is a change of clip. IE if I have 10 different clips in my film, I get this noise at 10 different locations in my last recorded movie. These are the places where begins a new clip. There is no such noise present when I play the project in movie maker is not present in the original source file (which is an avi file).

  Interestingly, when I save the movie in any format as DV - AVI, (IE high video quality, local playback or any wmv file) there is no such noise introduced in the final movie. I used the same clips to make the final movie in windows xp using movie maker 2.1 and there was no question also in the recorded final DV - AVI movie.

  So the problem seems to be only on movie maker 2.6 on windows 7, when recording in DV - AVI format (all other formats of work correctly). Clips of same worked well on movie maker 2.1 on windows XP, when recording in DV - AVI format.

  I suspect that the video filters (in tools-> options) could be the reason. I checked and all active video filters are those in C/windows/SYSWOW64 directory, so there is no non-microsoft video filter.

  Pls help as windows live movie maker (installed on windows 7) all blocks left and right and is basically useless because it can't record any movie to the end. Director of Windows 2.1 was the best choice, but it cannot be installed on windows 7. I can download the video to show what kind of flicker noise is there at the beginning of each clip. It is a volume high, shrill noise as if two things are rubbing against each other.

  I installed the filmmaker windows 2.6 on windows 7 Home premium. Everything works fine. When I try to record the final film in DV - AVI format, I get 5-7 seconds of noise very high height introduced where ever there is a change of clip. IE if I have 10 different clips in my film, I get this noise at 10 different locations in my last recorded movie. These are the places where begins a new clip. There is no such noise present when I play the project in movie maker is not present in the original source file (which is an avi file).

  Interestingly, when I save the movie in any format as DV - AVI, (IE high video quality, local playback or any wmv file) there is no such noise introduced in the final movie. I used the same clips to make the final movie in windows xp using movie maker 2.1 and there was no question also in the recorded final DV - AVI movie.

  So the problem seems to be only on movie maker 2.6 on windows 7, when recording in DV - AVI format (all other formats of work correctly). Clips of same worked well on movie maker 2.1 on windows XP, when recording in DV - AVI format.

  I suspect that the video filters (in tools-> options) could be the reason. I checked and all active video filters are those in C/windows/SYSWOW64 directory, so there is no non-microsoft video filter.

  Pls help as windows live movie maker (installed on windows 7) all blocks left and right and is basically useless because it can't record any movie to the end. Director of Windows 2.1 was the best choice, but it cannot be installed on windows 7. I can download the video to show what kind of flicker noise is there at the beginning of each clip. It is a volume high, shrill noise as if two things are rubbing against each other.

  ======================================
  There are many different types of AVI files and some
  can be problematic in Movie Maker. Conversion in
  Before you import into Movie Maker WMV can be
  is worth a try and it might be interesting to try to use the
  Version Vista Movie Maker 6 (it is a better application):

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Vista Windows Movie Maker Installer for Windows 7
  http://noeld.com/programs.asp?cat=video#wmminst

• Zero latency when recording possible? CS6

  I can't get the latency time at an acceptable level in hearing CS6.  When recording I can hear an audible delay when I pull my string guitar for when I hear it playing on my computer speakers.  The latency in Audidion was initially set to 200ms and I've adjusted all the way to 30ms (which is as low as possible as seems) but I still get a delay that makes it too difficult to play with a backing track.  Is it possible to reduce this latency time to zero?

  "Audio equipment" current settings are set at: MS, 30ms, 44100 Hz.

  I'm running my guitar through an M-Audio Fast Track Pro USB interface.

  Release of Windows 7 on board sound via an optical cable to a 5.1 receiver.

  Audition CS6

  A number of things...

  First, visit the M-Audio site and download ASIO drivers appropriate for your Fast Track Pro.  ASIO offers much less latency than MS and, probably more important, in my view, it allows the hearing latency compensation work properly.

  Second, the use of your sound card onboard which is designed for the playback of videos of pit (where the 5.1) rather than low latency recording.  I guess that's why you're stuck with Ms too.  Make your exit through the Fast Track pro and read to the accelerated procedure manual monitoring section.  Your interface allows 'direct material' monitoring for you to listen to your guitar on the entry, and not after a round trip via a to D, your computer conversion, then a D to a conversion.

  I hope these steps help!

• Can't hear audio when recording.

  I checked the preferences and I think that everything seems ok, but I can't get a peep out of him. Connection is headphone for pc,

  I also tried pre amp for pc but still nothing.

  As a test, I tried various tests and other freeware audio editing software and I can hear the sound when recording. I just can't hear when using Audition CS5.5

  Uses Windows 7 and hdmi sound through my graphics card. I think there must be a setting somewhere but I don't can not find. Thanks in advance for any help.

  Well, I had a play with the Realtek integrated sound card on my laptop - not my normal way of record - and has been able to monitor the entry as it was recorded.

  I used multitrack view (as one normally do) and the only thing I had to do was click on the 'I' symbol (next to the "M" (mute) (solo) "S" and "R" (arm for record) buttons.)  The 'I' is for the input of the monitor.

  However and this is a big however, on my laptop as soon as I specify the HDMI output, it disables the power supply of my helmet.  I can't try it without re - arrange my house, but I am betting that if I plugged the HDMI output on my laptop to my TV, the sound would be.  But it is certainly not on the headphone output of my computer.  It reappears on the headphones as soon as I select 'speakers '.  FYI, I also have to mess around with matching sampling frequencies since the HDMI is locked to 48 kHz and no digital output is set to 44.1.

  I hope this helps.

  Bob

• Message "Not responding" when recording in CS5

  Today, it is the first time that I had the chance to get out my new illustrator CS5 for a drive and have found that the more often than otherwise, when I save the file, I'm working on I get the error message "Not responding" appear. My system is a brand new Dell quad core, Q955-@ 2.83GHz with 8 GB RAM running Win7 64 bit.

  The files that I use are located on a network drive, and I wonder if this may be the problem. If I let it go for a minute or two that he corrected himself, but I find it a bit odd, given the software and materials, that I am running.

  No idea where to start?

  Given that disconnect him persistent mapped network drive, my problem went away. So far so good.

  To clarify my question, I saw intermittently a message "Not responding" in the title bar of Adobe Illustrator CS5 when you try to save a drawing. By clicking on file/save would immediately show a wait cursor (blue circle in Windows 7) and the Save dialog box does not appear.

  Although the error "not responding" appears, my PC does not seem to be busy doing anything (no use of the CPU for the executable to HAVE it in the Task Manager).

  After some searching on Google for hung in Windows 7 when recording applications, I came across the following Microsoft link:

  http://support.Microsoft.com/kb/313937

  According to Microsoft, Windows 7, when you save, first checks the availability of network resources (persistent mapped drives liked). Applications like MS Office may crash when you try to save if these network resources are not available. Windows 7 seems to also not 'hear' well with older versions of Windows (such as Windows 2000 for example). The guillotine registration number can also be caused by a slow network connection to network resources.

  In my case, I had:

  1 - a slow link between the guillotine Windows 7 PC and a persistent (ie - reconnects when connecting) mapped network drive.

  2 - the network drive is also hosted on a Windows 2000 Server (Windows 7 is not always play nice with Win2K)

  After disabling the group policy that this drive mapped to the login time, my question GOT hooked disappeared. I can still reach the reader via a shortcut on the desktop of the PC Win7, and which seems to work very well. It is only when this resource has been "localized" as a shared drive that this become a problem for Windows 7.

  Anyone having this problem should also verify the possibility of losing your network connection to a shared resource (as the network adapter passes in mode "sleep" because energy saving options and thus break the connection to the network).

  Hope this helps others.

• Microphone does not work well when recording video to work

  For the last few months, my phone has this kind of problem whenever I wanted to record a video. The audio in the recorded video may not be heard clearly, even with the highest volume. There sounds caring as wind noise even though I'm far from any source of wind such as fan, or when recording. At first I thought it was problems with the listener; probably I had disconnected the wrong way. But after trying a few times, the result is always the same. When I tried to record audio using voice memos, the audio is properly can be heard. This problem only occurs when you record a video. Please help me.

  Hi afiqahroshidi,

  Please visit Apple support communities.

  It seems that your iPhone does not record clear audio as well as your videos. It seems that you have identified that the background microphone (used to record voice memos) works, according to get help with microphones on iPhone, iPad and iPod touch.

  Then, try the following steps, coming from the link above.

  If audio video recordings of soft sounds, or Siri can't hear you, ensure that the microphone near the iSight camera - corner of your iPhone on top, bottom, the receiver is not blocked or covered.

  If the microphone and the receiver are not blocked:

  Get help

  If you still have questions after you test the microphone on your device, try the following steps:

  1. Unplug any accessory plugged into the headphone jack.
  2. Avoid blocking the mic microphone and iSight with your fingers while holding the device or video recording.
  3. Remove the protection of screen, movies or cases that cover the microphone, microphone iSight or iPhone receiver.
  4. Clear all debris from the microphones or receiver iPhone. Refer to the manual of your device on the locations of the microphone.
  5. Restart your device.
  6. Make sure you have the latest version of iOS.

  If you have tried these steps and people still can't hear you on the phone or FaceTime calls or Siri does not hear your requests, contact Apple technical support.

  Best regards.

• Why is my cd not load & play automatically when it is inserted into the media player?

  Why is my cd not load & play automatically when it is inserted into the media player?

  If you use Windows Vista or Windows 7, try the following:

  Click Start, type: AutoPlay

  Press enter on your keyboard

  Scroll to CDs

  Click in the list box

  Select an action:

  Play audio CD using Windows Media Player.

  See:

  Windows Media Player Fact not play Audio CD- Roma automatically

  Also:

  Media Player 12 auto-play when inserting audio CD ... behavior

• my player windows media "does not. It freezes when I'm clicking on the library. I can play songs when I double-click on them in my documents.

  my player windows media "does not. It freezes when I'm clicking on the library. I can play songs when I double-click on them in my documents.

  Hello

  1 how long have you been faced with this problem?
  2 have you made changes on the computer before this problem?

  Run the following article fixit tool and check.
  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic

  Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:

  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• NO sound when recording Audio - problems with Windows 7 Ultimate 64-bit

  I got in trouble for almost a year now with NO sound when recording Audio with Windows 7 Ultimate 64-bit. I just found this forum today. It's really weird how recording with windows and other sound recorder works perfectly since 1998 or so until the upgrade to win 7. Now every time I try to record it shows no found recording device or just fails to record any sound. As you'll see below I have activated What U Hear so I can use the system recording features sounds.

  I use the functions of audio recording and pdf reader because I'm legally blind. It is one of the few tools that I could use with ease on all my systems windows for many years.

  A similar question has started happening with nvidia graphics cards. AND... I was led to believe that it was a problem with Sony wanting more strong piracy measures built into windows. Am I correct to assume that this is what is happening with the sound also today or is there a solution to this frustrating problem?

  I run a dxdiag & posted that, according to me, you asked another user on the forum, the same or similar problem.

  Help solve this problem would be greatly appreciated as this has been a problem for quite a while now.

  ------------------
  Information System
  ------------------
  Time of this report: 07 25, 2012, 19:06:02
  Computer name: RAIDER
  Operating system: Windows 7 Ultimate 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503) - 2030
  Language: English (regional setting: English)
  Manufacturer: Gigabyte Technology Co., Ltd..
  System model: P67A-UD3-B3
  BIOS: Award BIOS v6.00PG Modular
  Processor: Intel Core i5 - 2500K CPU @ 3.30 GHz (4 CPUs), ~3.6GHz
  Memory: RAM 8192MB
  Available OS memory: 8176MB RAM
  Page file: 2861MB used, 13487 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  ------------
  DxDiag Notes
  ------------
  Display 1 tab: No problems found.
  Sound tab 1: No problems found.
  2 Audio tab: No problems found.
  Input tab: no problems found.

  -------------
  Sound Devices
  -------------
  Description: SPDIF Out (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: Yes
  Default voice playback: no
  Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
  Manufacturer ID: 65535
  Product ID: 65535
  Type: WDM
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  WHQL Logo would be: n/a
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Other files:
  Driver provider: Creative Technology Ltd.
  HW Accel level: basic
  Cap flags: 0x0
  Min/Max sample rate: 0, 0
  Static/Strm HW Mix beef: 0, 0
  Static/Strm HW 3D steers: 0, 0
  HW memory: 0
  Management of the voice: No.
  Listen/Src/EAX (TM) 2.0: No, no
  Listen/Src/I3DL2 (TM): No, no
  Sensaura (TM) ZoomFX (tm): No.

  Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: No.
  Default voice playback: Yes
  Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
  Manufacturer ID: 65535
  Product ID: 65535
  Type: WDM
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  WHQL Logo would be: n/a
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Other files:
  Driver provider: Creative Technology Ltd.
  HW Accel level: basic
  Cap flags: 0x0
  Min/Max sample rate: 0, 0
  Static/Strm HW Mix beef: 0, 0
  Static/Strm HW 3D steers: 0, 0
  HW memory: 0
  Management of the voice: No.
  Listen/Src/EAX (TM) 2.0: No, no
  Listen/Src/I3DL2 (TM): No, no
  Sensaura (TM) ZoomFX (tm): No.

  ---------------------
  Sound Capture devices
  ---------------------
  Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: Yes
  Default voice Capture: No.
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Description: Microphone (Webcam Pro 9000)
  Capture audio by default: No.
  Default voice Capture: No.
  Driver name: USBAUDIO.sys
  Driver version: 6.01.7601.17514 (English)
  Driver attributes: Final retail
  Date and size: 2010-11-21 13:23:47, 109696 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: No.
  Default voice Capture: Yes
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Hello

  In Services, verify that the Windows Audio service is running and set to automatic.

  a. Click Start and type Services and press ENTER.

  (b) ensure that these services are defined accordingly.

  c. right-click the service, and then click Properties.

  According to the DXDiag, there is no default sound capture selected.

  Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: No.
  Default voice playback: Yes

  Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: Yes
  Default voice Capture: No.

  Description: Microphone (Webcam Pro 9000)
  Capture audio by default: No.
  Default voice Capture: No.

  Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)

  Capture audio by default: No.

  Default voice Capture: Yes

• How is done whenever I connect to the internet, its random starts to play even when I have no open browser? Is this a virus?

  The problem started last week after my computer installed the automatic updates. Since then, my desktop aero settings last haywire and as I said in the title, the (possibly videos) sounds play even when I have no open browser. I know, there is a security update that caused computers down, but this update is no longer on my system. Please help me.

  I heard of a virus causing similar problems. Take a look at this site for some good information/instructions.

  http://www.selectrealsecurity.com/malware-removal-Guide/

  I hope this helps.

• How to play involved when the headset is not connected?

  original title: problem of speaker and headphone

  my speaker in the lower-right corner icon said speakers and the headphones and I don't know how to isolate the speakers to play only when there is no helmet and isolate the speakers when I plugged headphones

  Hi JonathanStellino,

  Thanks for asking! If I understand correctly, you want to set the audio output device by default. I suggest you follow the troubleshooting steps to check if this may help.

  (a) click Start, in the search box, type "Change sound card settings" or "Manage audio devices" without the quotes.

  (b) click Manage Audio devices.

  (c) click the sound, click the play tab.

  (d) click the device you want to set as default.

  (e) click on set as default, click apply.

  f)       Click OK.

  You can also run this Troubleshooting Audio troubleshooting and check if it helps fix the problem.

  Just reply with the results. I'd be happy to help you further.

• Set the amplitude of mike when recording directly in hearing CC?

  I can't figure out how to set the amplitude of mike when recording directly in hearing CC.

  
  

  When I load hearing I have click on the waveform and create a file.

  
  

  I can then click on the Red record button and start recording, but the amplitude is very small.

  
  

  I know I can fix it in post editing but how to adjust the amplitude record raw?

  
  

  Well, I looked at the manual. If I try to use a microphone with this mobo, I'd be very inclined to mount the system audio front panel, as it seems to have an understanding of slightly different mic that work peut better (although I think that you must run the configuration utility to configure). The details of this are on page 30 of the manual. For starters, it seems that he might in fact be two mic channels, which probably means that they took little seriously, a little more than usual.

  I still think that the preamp is better, but I won't get it a chance to consider the issue until tomorrow.

• Is it possible to edit the messages that are automatically created when recording a demo of software?

  I want to change standard text messages which are automatically created when recording a demo of the software.

  

  Is this possible? Where can I find them?

  This text is generally controlled by the RDL files located inside your Captivate installation folder.

  

• How to integrate an audio to a Muse image file so that the music plays only when you click on the image?

  Hello! I'm looking for a way to incorporate an audio file (mp3 or quicktime) into a still image in my Muse site. Ideally, the audio would play only when you click the image, so that each image can contain a separate audio file. So important is that the audio file is not visible on the site (so soundcloud, youtube and vimeo doesn't work here). Is there a way to do this? Thank you, AR

  Check out this edition of the month of 123Muse (www.123Muse.com). This is audio and video by Muse.