PlayBook Simulator starts do not

Similar Questions

• PlayBook Simulator does not start in vmware.

  I had just installed sdk playbook and Simulator on windows 7 and configure the Simulator on vmware.

  But the playbook Simulator does not start on vmware... He simply display the splash screen...

  Do you have another computer to try out it?

  For example, in my case, I have 3 PC. Two of them the Simulator installed and worked well, the third, no matter what I do I can't get the Simulator to go beyond the start screen.

  I even took a suspended version of the Simulator everywhere for my 3rd machine, and it has run for a little while so locked up when I tried to activate the mode of development. However, VMWare works perfectly for other sims installed on this machine (but with VMTools installed in the virtual machine), then it is not a VMWare question by itself.

  Personally, I think that unfortunately for certain combinations of hardware/OS simulator simply does not work.

  FWIW my 3rd machine is underpowered with only 2 GB of ram, an Intel ATOM (z520) processor and a GMA 500 GPU which are pushed along Windows 7.

  HTH - Rufus

• PlayBook Simulator included in the SDK WebWorks for Mac does not start

  Hi, I downloaded and installed the WebWorks BlackBerry SDK for Tablet OS for Mac from http://us.blackberry.com/developers/tablet/webworks.jsp . I have VMWare Fusion installed 3.1.2. I used the beta3 .iso Installer to create a virtual machine, and it worked very well. Open the bbwp/blackberry-tablet-sdk/BlackBerryPlayBookSimulator-1.0.1/BlackBerryPlayBookSimulator.vmx file load VMWare Fusion and adds a virtual machine named "BlackBerry PlayBook Simulator" in my VM library. When I try to 'turned on' virtual machine, nothing happens. The power seems to be on for two seconds and turns off the virtual machine. I can't find all the lines from log in Console.app. the 'Virtual Machine'-> 'Force Start Up' menu is no help either. I download the stand-alone "BlackBerry PlayBook Simulator for Mac", that is also marked v1.0.1 but I am not optimistic if it is delivered as a set of folders VMware. Please do not make me run the PlayBook Simulator in a virtual Windows XP machine!

  Hi jaschroe,

  Try to manually copy the folder BlackBerryPlayBookSimulator - 1.0.1 to another location on your Mac and then try to open this copy of the VMX file in VMware Fusion. (No need to re - install).

• Sencha Touch not displaying icons only not the Playbook Simulator

  I see this weird problem. I wrote a simple Webworks app using Sencha Touch. It works fine on the desktop browser. However, on the Playbook Simulator, I see a few flaws. For example the standard icons not displayed. See the pictures attached to the difference:

  On the Playbook Simulator:

  

  On the desktop browser:

  

  I know that's not a consolation, but when I tried the latest version of PlayBook on the physical hardware toolbar buttons work fine.

  I ran through the example of the kitchen sink and everything is made perfect!

  So know that your problem will be solved in the official v1.0 RTM software version and Simulator.

• PlayBook Simulator not able to access the internet

  Hello

  I'm trying to get the Playbook Simulator running to repackage an app, but I'm unable to get the Simulator to connect to the internet.  The browser refuses to connect and just displays a message indicating:

  Error
  A network error has occurred.
  Please try again later.

  I tried some things, like change network card settings in VMware default (NAT) to Bridged and then restarting the virtual machine, but that did nothing. I tried to remove the virtual computer's network card, and then by adding a new.  I disabled the Norton Internet Security firewall and intrusion prevention.  I have disabled the Windows Firewall.  None of this solves the problem.

  I use a Windows 7 laptop connected to a wireless network.  No VPN or proxy is in use.  Windows 7 network adapters screen shows two cards VMware, vmnet1 and vmnet8, both connected to an 'unidentified network'.  I tried to fill these my PC wireless cards, but the VMware adapter did not allow that and threw an error.

  Any suggestions?

  Some basics: Verify there is an IP address on vmnet8. Verify that you can ping your host operating system.

  If it still does not work, cut the developer mode (on-> them security), then try again the browser. Yes, I know it sounds counterintuitive, but it worked for me.

  You can re - switch to developer mode, once you have turned it off and it seems fine. You don't quite know why this is happening, but it might be useful to take a VM snapshot once you've cracked.

  Good luck!

• The difficulty to launch android applications reconditioned on device PlayBook (Simulator OK)

  Just updated my android app and it passed verification.  I will install on my PlayBook, and it won't start.

  The application works on the new 2.0 PlayBook Simulator very well, but when I go to install on the current device, it installs, but will not start.

  I tried without success (all these I tried both USB and WiFi connection) the following:

  • Restart the PlayBook after the 2.0 update (several times)
  • Signature of the bar and the deployment using command-line tools
  • Do not sign the bar and deployment via command line tools (after configuring Debug token)
  • Deployment by using the new eclipse plugin - is to expire, I have even increased the time-out value of 60 seconds and much more), it gets stuck on "Launch BlackBerry Android Runtime."... ", then a message that says" failed to connect ├a 192.168.1.139 to BAD! »

  Also, I'm under Mac OSX Lion and v2.0.0.3778 PlayBook.

  Anyone else having any of these issues or having luck getting your reconditioned apps to run on the real device?

  Any of you installed a pre-beta version of an Android player that has been disclosed on another forum?

  Whether a security wipe can be in the order that I suspect that the two versions of the player are probably in conflict!

  HTH - Rufus.

• Debug with FlashBuilder 4.5 and Playbook simulator mode

  I use falshBuilder 4.5 and the last Playbook Simulator (July 2011).

  I am able to run the application on the Simulator. However, when I use the Debug mode, I get error on the Simulator as well as on the FlashBuilder. On the playibook Simulator, it says unable to connect.

  I use the IP address of the Simulator (like RUN works very well). Also I use debug by default IP configuration of the host defined in the Debug configuration.

  Has anyone faced similar problem. Something else must be set for this?

  Thank you.

  Hi all

  Finally I got it to work. I was using the wrong host debug after changing IP right it started working.

  Also note approach default host IP and debug also did not work. This is FYI.

  Thank you.

• Problem with the installation of Playbook Simulator program

  I get the following error message in the VMware Player when trying to install the Playbook Simulator on my Windows XP computer.

  What is the reference for this? I have to re-download the BlackBerryPlayBookSimulator-Installer - 0.9.2 - Win.exe file and start from scratch?

  ERROR MESSAGE:

  Loading of the neutrinos...

  WARNING: The contents of/dev/hd0 is permanently deleted!

  You want to continue with the installation?

  [UI Y] or [N]? --> Y

  Partitioning/dev/hd0...

  Install images... This may take a few minutes

  [33% 1 M/s ETA:04:55 s: #]

  bzcat: error during decompression data integrity.

  Input file = / cd/hd0t179, output file = (stdout)

  It is possible that the compressed file has been corrupted.

  You can use the option - tvv to test the integrity of these files.

  You can use the program "bzip2recover" to try to recover

  data from the sections not damaged damaged files.

  mkqnx6fs: not a fs-qnx6 filesystem ' / dev/hd0t179 ".

  Operation finished, file synchronization and shutdown system

  Please remove the installation media

  Press to restart.

  Hey tony,.

  your best bet will probably be to re - download, extract and install again. How much space you set the virtual disk have? Try the 8 GB configuration and see if that helps the next installation. Good luck!

• Simulator of does not work in my laptop

  I have a problem: Simulator works does not in my laptop
  My laptop: HP elitebook 8460 p, core i5 2540, hard drive 500G, 4 GB ram, graphics intel hd 3000
  Status:
  Hyper-V... OK, free ram 2.5 G
  -Graphic support open GL 3

  Video:
  https://www.YouTube.com/watch?v=1DdrhGCkeVI

  Does show that as soon as it starts or what is done to access this screen.  What host operating system are you running?  You can try to re - install the Simulator?

• PlayBook Simulator - missing all icons, features etc.

  I downloaded the Simulator playbook and runing am through VMWare... but I don't see not all icons, can't use the browser etc.

  screenshot:

  

  The Simulator is limited at this stage to deal purely with AIR apps only? or is there a problem with my installation.

  I was hoping to test the functionality of the browser for certain web applications, HTML5 etc before going into a java application development.

  Thank you!

  steve_web wrote:

  The Simulator is limited at this stage to deal purely with AIR apps only?

  Thank you!

  Yes.  Currently the BlackBerry PlayBook Simulator can be used only to test custom air applications.

• Problem adding Playbook Simulator to Eclipse

  Last night, I downloaded VMWare and the current version of the Playbook Simulator.  The Simulator works very well and I went into the settings and enabled debugging and confirmed the IP address in the security settings.  I also install the password.  My problem is when I go into Eclipse to add the Simulator.  I tried to make debugging and preferences.  I first tried the automatic detection, but he was unable to find it.  I then he entered manually with the IP address and the password, but it does not work as well.  I tried with both the Simulator runs also with stop you it, and same result.  Also, I tried to ping the ip address from a command prompt so that the Simulator was running and failed.  Thinking it could be a firewall issue, temporarily, I disabled my firewall and antivirus but get the same result.  I also tried a reboot of my PC with no luck.  I'm out of ideas and would welcome any advice I can get.

  Thank you!

  I realized what the problem was.  We won't have the IP address in the settings menu.  On the home screen there is an icon that you can click on that will tell you it's in development mode and it will give you the real IP address.  Hope this helps someone else who had the same problem.

• BlackBerry Playbook Simulator ISO 2.0

  Is there an ISO for the 2.0 playbook Simulator file?  I try to install on VirtualBox that my computer cannot run the latest version of vmware Player.

  Thank you.

  Why not just try? Which will give you an answer more reliable than to go really what anyone else. As I said, I thought the Simulator had previously worked with VirtualBox, but I am not certain about it.

• How buggy is the Playbook Simulator?

  It seems most of the things I write are causing problems with the Playbook Simulator.

  I tend to write most of the content of the page HTML from JQuery

  The simplest things can cause the Simulator to die

  An example...

  If (Debug) $("#debuglog").append ("attempt to display " "+ sp +")
  ");

  Here, I'm just writing for a div called debuglog so I can see what is happening - sp is a page that I just shot locally via Ajax - must write errors, it's the only way to debug a page.

  Who broke things, by removing the old tag led her to begin to work again in the Phone Simulator

  Still, he does not in the Playbook Simulator - it will work on a real Playbook?

  All the little stupid things that SDK WebWorks complains just work in Android

  Answer to myself for the benefit of third parties

  Buried in the forums, you will find a thread on the Playbook having problems with JQuery 1.5.1

  The solution is simple - downgrade to 1.5.0 or 1.5.2 upgrade when it comes out

  It took me a week to find out what was wrong. All my applications now work simply by changing to 1.5.0

  While the browsers work very well with 1.5.1 the Playbook Simulator is not

  I hope this helps those of you who are also frustrated that I was

• MDS Simulator starts and then closes

  I have installed Java, MDS Simulator and the BBY Simulator on a laptop. Installs it all ran without any errors. I did this for 5 or 6 other people and that you have no problems. On this machine when I go to launch the Simulator MDS the DOS window opens and closes a few seconds, I can't see the messages of. Then when I run the Simulator BBY it opens but when I try to run our application I get a communication error. On other machines the BACK area stays open and the Simulator works very well. I found an article about this type of problem and not the recommended patches and the MDS Simulator still does not work. I checked the logs on this machine and there is NO errors. I uninstalled everything and started around and it still does not work. Has anyone seen this kind of problem before?

  Thank you

  Bill

  Version 4.1.2 MDS - CS Simulator requires JDK version 1.5.  It does not work with version 1.6.

• C++ on Playbook Simulator programs?

  Hello world!

  However, simple apps using Adobe Flash Builder 4.5 on Playbook Simulator ran successfully, now I am interesting in more complicated things that save and run native C++ programs on Playbook Simulator. This folder should I place my apps and that set up the operations that I do to see my apps on the main screen of the Simulator? How can I get the root privileges to set libs (installation), requiring the my apps?

  You can't get root access, and you don't need either.

  Native applications are developed using the native SDK (NDK) which is currently in closed beta. It should soon be to achieve an open beta, or a published form, how he must have all the tools you need to allow you to build your apps, package and deploy them in the Simulator or a real tablet.

  Note that native apps are "not different" since an AIR application in the sense that they install .bar files and are limited in the same way. For example, they run in the same kind of app 'sandbox', preventing (if AIR, WebWorks or native) apps to access the files on the other, and so on.