Plug pulled out

I have had my Sansa Clip plugged into my computer to sync music.  He was inadvertently pulled out during this process.

I know it is not supposed to be, damage.

Is it possible to recharge or difficulty this mp3 or do I have to buy a new one?  Unicorn

Advertisement

What was the result? How it does not work properly?

A few things you can try:

1 reset the player (hold down the switch to 'Works' for 15-20 seconds), then try to put it on again normally.

2. If you can access the menu, the reformat. Settings > Format > Yes

3. If you cannot access the menu, connect the player into recovery mode. 'Hold' switch, then press and hold the Center button while connected to your PC. Next, create a file named "sansa.fmt" empty text and copy the partition of 16 MB - FORMAT in Windows Explorer (aka 'My Computer') or whether it is the equivalent of your operating system called, then disconnect the clamp. It should restart and format.

NOTE: Options 2 & 3 will delete all files from the user to the reader, but I guess you cannot currently access in all cases.

Tags: SanDisk Sansa

Similar Questions

  • I have windows 7 os. a virus ripped through my registry and pulled out of the recovery points.

    I have windows 7 os. a virus ripped through my registry and pulled out of the recovery points. Removed the hard drive to retrieve data on the device of the black widow on another computer, but cannot access the data due to password protection. How do my stuff? I know that I have to wipe the drive and start over, but I want my files first. I can see them working with the original BACK on the laptop, but they can't get out.

    Hello

    You posted in the Forums of Windows XP if you say you have Windows 7 so be careful
    When you enter your Questions.

    Answers - Forums of Windows 7
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7

    ---------------------------------------------------------------------------------------------------------------------

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be harder to detect as
    the cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
    It will display all the infections in the report after you run - if it will not run changed the name of
    TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
    check with the other methods below.
    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/products/malwarebytes_free

    SuperAntiSpyware Portable Scanner - free
    http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    -----------------------------------

    Original version is now replaced by the Microsoft Safety Scanner
    http://OneCare.live.com/site/en-us/default.htm

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    ----------------------------------

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    After the removal of malicious programs:

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    ======================================

    If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
    MALWARE IS STILL PRESENT).

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    =======================================

    For extreme cases:

    Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
    This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
    uses aggressive methods to detect these threats, there is a risk that it can select some
    legitimate programs for removal. You should use this tool very carefully and only after
    you have exhausted other options.
    http://us.Norton.com/support/DIY/index.jsp

    ================================

    If you are in North America, you can call 866-727-2338 to get infections of virus and spyware.
    See http://www.microsoft.com/protect/support/default.mspx for more details. For international information,.
    see your subsidiary local Support site.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • I've recently upgraded to CS6. For some reason any floating document windows that I move in the workspace, pull out the interface, especially to the left and sometimes to the bottom of the screen. I gave tried Essentials rearmament and Interface to d

    I've recently upgraded to CS6. For some reason any floating document windows that I move in the workspace, pull out the interface, especially to the left and sometimes to the bottom of the screen. I gave tried Essentials rearmament and default setting Interface. A message letting me know that by default has been reset but I still have the problem. It's SO frustrating as a large part of the time I can't go to the window, I want to work on. Help, please!

    Hi John

    Try resetting preferences

    Press and hold the CTRL, ALT, shift (Windows) / command Shift (MAC) Option in starting up of Photoshop.

    Select Yes

    Note:-make sure you backup Presets/stock/Modified Workspaces/Plugins (if any)

    Thank you

    Assani

  • Incorporation of links within content drop-pull-out tray

    Hello

    I have incorporated a number of Pull out trays in my DP that work very well. I would like to now include links in the content of the moving image. The content is essentially a numbered list that is

    (1) part 1 - the beginning

    (2) part 2 - the Middle

    (3) part 3 - the end

    So I would like the user is able to pull the tray, scroll, then press 1) and move to a specific page within the RFP.

    I though I could convert the text of each list item in a button, then use the 'Go to Page' or 'Go to URL '.

    However, when I try to group each button convert to a single piece of content, it seems to work.

    Is there a proper way to achieve this functionality?

    Any advice greatly received.

    Kind regards

    Iain...

    Create buttons without actions until you group objects that make up the frame of content. Give a real name as part 1 button instead of button8 to each button. After pasting the image contained within the container, use the layers panel to select the buttons and add actions.

    There are examples of this in the ends of DPS > Advanced overlays.

  • Pull-out trays, side and bottom edge question

    Hello

    I tried to renew my DP app after it was rejected for the App Store, by adding a few pull-out trays with scrollable content.

    Can I place several bins pull-out on the right edge, but when I also creates a pull from the bottom edge test it stops the other pull-out trays work properly, IE scrolling of stopped in the status bar.

    Is it possible or can you not pull-out trays on the edge of right and at the bottom of your DP?

    Kind regards

    Iain...

    They may not overlap.

  • Pull-out tab in InDesign CS6

    Hello

    I'm fighting to create a pull-out tab in InDesign CS6. I tried the method described by Colin Fleming in his video, but this no longer seems to apply.

    How do I go about creating a (horizontal) pull-out with the new DPS Tools tab? Scroll frame?

    Thank you

    Tess

    Yes, use a floating frame.

    Bob

  • MBP turns on and turns off when plugging in/out

    Hi all

    I had a problem with my MacBook Pro mid 2012 since I got it. I started with Mountain Lion and have recently upgraded to El Capitan. Same problem on all releases. I assumed it was a feature, but it really starts to get boring.

    When my MacBook is in mode 'sleep' (closed or open, is not serious), whenever I plug the power chord, or it just turns and then fall back to sleep after a few seconds. I know that MacBook have a sort of hybrid of special standby/hibernation where they also record the State of the hard drive, but why should it turn on when I pull the power cord? This is especially troublesome when I travel. I want to just pull the cord and put the MBP in my bag. But no, I have to wait until she returns from his sleep, and again, without the risk of possible damage/failure of HARD drive.

    I hope someone has a solution or maybe just an explanation for it.

    Thank you!

    It is safer to stop any computer before departure.  Why it does what you say it does let you guess.  Not all models for this.  I tried to address this during your first year of ownership or Applecare and not 4 years later.  In addition, your PRAM Battery or the main battery may be soon need replacement, and who could do to issues of power more.

  • Satellite P15 - if the plug comes out, the battery stops charging

    My Toshiba is rather annoying. I hope there is a solution to this and it is not integrated in the computer by braindead materials developers.

    My battery is toast. For a long time. I find the computer works very well if the power cable is in. If she comes out, the battery has usually about a minute and a half of her life. However, what makes me shit off the coast, it is that the battery does not load again. He will sit and drain his power to zero, even with cable connected sector, if the plug is disconnected even for a millisecond. The only way to load it again, is to shut off the computer and start upward.

    What the hell?

    Hi floydien,

    Wow, Satellite P15 is really an oldie.

    I m not an expert, but to me this looks like a battery or motherboard problem. A battery can be recharged about 500 times and after that it will lose a lot of power. This means that you can work a few minutes only on battery mode.

    In your case, I'll try a new battery. If it doesn t work I think you need a new mainboard.
    Also take a look on eBay. There you can get second hand cheap parts sometimes.

  • BlackBerry BB Q10 Q10 - difference between Power OFF and "battery pull out?"

    Hello

    Anyone has any info on what difference the phone sees between a switching OFF power and make a battery out?

    Apparently, some of the guys to BlackBerry customer service advise you to do a battery pull off when the phone is in MODE.

    Just curious to know what is the reason behind it.

    When you turn off your phone, keep everything intact until you turn on again. When you do a battery pull, he interrupts the operation of the phone and many temporary files, not necessary for the proper functioning of the phone, are deleted. In many cases, when there is something playing havoc on your phone it is found within these temporary files.

    Another method to do a battery pull should press and hold the power button until the BlackBerry is displayed on the screen. Other things will appear before that but if you continue to hold until it shows, the effect is similar to a battery with the phone powered pull. Note that pressing the power button to turn off the phone does not erase these temporary files unless you press and hold until the BlackBerry presents, usually about 15 seconds.

    I hope that helps you.

  • ThinkPad T430 flashes a black screen for 5 seconds when AC plugs In/Out

    Hello

    Yesterday, I took new model laptop - T430. He flashes a black for 5 secn screen when I have plugins entry/out. The one you suggest if it can be fixed?

    I checked the refresh rate. She is set to 50.

    Kind regards

    Thiru!

    Hello

    Thanks for your quick response. He is already set to 'Never' as directed by the screenshot that you sent me.

    Can you please send me any url to install the graphics drivers as I am new on this?

    Kind regards

    Thiru!

  • Error won't let me go to another class (has got me pulling out my hair)

    Good buddies, so basically I have 2 buttons in the mainfraime class. The first button leads to the candidate page and the second page of voters. The first button works and redirects the user to the PasswordDemo page, but to the hell out of me I can't understand why he refuses to acknowledge the 'profile' class as its supposed to go to when the user clicks the second button. He keeps telling me that "the Profile() method is not defined for the Mainframe type. Help, please.

    Class mainframe:
    //The applications first or the main frame
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    
    public class Mainframe extends JFrame {
    
            private JButton myFirstButton;
            private JButton mySecondButton;
            private javax.swing.JButton jButton1;
            private javax.swing.JButton jButton2;
            private javax.swing.JLabel jLabel1;
            private javax.swing.JLabel jLabel2;
            private javax.swing.JLabel jLabel3;
    
            // Constructor for a new frame
    
            public Mainframe() {
    
                    super("Welcome Page");
                    
                    
    
                    myFirstButton = new JButton("Contestant");
                    myFirstButton.setFont(new Font( "Arial", Font.BOLD, 18));
                    myFirstButton.setBackground(Color.red);
    
                    mySecondButton = new JButton("Voter");
                    mySecondButton.setFont(new Font( "Arial", Font.BOLD, 18));
                    mySecondButton.setBackground(Color.ORANGE);
    
                    Container c = getContentPane();
                    FlowLayout fl = new FlowLayout(FlowLayout.LEFT);
                    c.setLayout(fl);
    
                    c.add (myFirstButton);
                    c.add (mySecondButton);
    
                    ButtonHandler handler = new ButtonHandler();    //creation of a new Object
                    myFirstButton.addActionListener(handler);          // Attach/register handler to myFirstButton
                    mySecondButton.addActionListener(handler);        //Attach/register handler to mySecondButton
    
                    setSize(400, 300);
                    show();
                    
           
            
            }
    
    
            public static void main(String [] args) {
    
                    // Make frame
                    Mainframe f = new Mainframe();
    
                    f.addWindowListener(
                            new WindowAdapter() {
                                    public void windowClosing(WindowEvent e) {
    
                                            // This closes the window and terminates the
                                            // Java Virtual Machine in the event that the
                                            // Frame is closed by clicking on X.
                                            System.out.println("Exit via windowClosing.");
                                            System.exit(0);
                                    }
                            }
                    );
            } // end of main
    
            // inner class for button event handling
            private class ButtonHandler implements ActionListener {
                    public void actionPerformed(ActionEvent e) {
                            if (e.getSource() == myFirstButton) {
                            
                                 PasswordDemo inputForm = new PasswordDemo();
                                    //inputForm.setVisible(true);
                                    
                                    try
                                    {
                                    PasswordDemo.createAndShowGUI();
                                    inputForm.setVisible(false);
                                    }
                                    
                                    catch(Exception d)
                                    {
                                         
                                    }
                                   // new PasswordDemo();
                            }
                            if (e.getSource() == mySecondButton) {
                                 
                           //     Profile p = Profile();
                                
                           //     p.setVisible(true);
                                  
                           }
                    }       
            }
            
            public void actionPerformed (ActionEvent e)
            {
                String cmd = e.getActionCommand();
    
                if (mySecondButton.equals(cmd)) {
                     boolean success=true; 
                     if(success)
                     {
                     Profile p = Profile();
                    
                       p.setVisible(true);
                
                     }
                     
                }
    
            
          //  private void mySecondButtonActionPerformed(java.awt.event.ActionEvent evt)
        //    {
         //        Profile p = Profile();
                
         //       p.setVisible(true);
         //   }
    
            
    } // end of outer class
    }
    Profile class:
    import java.awt.event.ActionListener;
    import java.sql.*;
    
    public class Profile extends javax.swing.JFrame {
    
        public Profile() {
            initComponents();
        }
    
        @SuppressWarnings("unchecked")
    
        private void initComponents() {
    
            titleLabel = new javax.swing.JLabel();
            nameAccess = new javax.swing.JLabel();
            ageAccess = new javax.swing.JLabel();
            heightAccess = new javax.swing.JLabel();
            weightAccess = new javax.swing.JLabel();
            lastNameAccess = new javax.swing.JLabel();
            descriptionAccess = new javax.swing.JLabel();
            nameLabel = new javax.swing.JLabel();
            lastNameLabel = new javax.swing.JLabel();
            ageLabel = new javax.swing.JLabel();
            heightLabel = new javax.swing.JLabel();
            weightLabel = new javax.swing.JLabel();
            descriptionLabel = new javax.swing.JLabel();
    
            setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
    
            titleLabel.setFont(new java.awt.Font("Gungsuh", 1, 18)); // NOI18N
            titleLabel.setText("\"User\"'s Profile");
    
            nameAccess.setText("Name: ");
            nameLabel.setText("");
            
            lastNameAccess.setText("Last Name: ");
            lastNameLabel.setText("");
    
            ageAccess.setText("Age: ");
            ageLabel.setText("");
    
            heightAccess.setText("Height: ");
            heightLabel.setText("");
            
            weightAccess.setText("Weight: ");
            weightLabel.setText("");
            
            descriptionAccess.setText("Description: ");
            descriptionLabel.setText("");
            
            javax.swing.GroupLayout layout = new javax.swing.GroupLayout(getContentPane());
            getContentPane().setLayout(layout);
            layout.setHorizontalGroup(
                layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                .addGroup(layout.createSequentialGroup()
                    .addContainerGap()
                    .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                        .addComponent(titleLabel, javax.swing.GroupLayout.PREFERRED_SIZE, 246, javax.swing.GroupLayout.PREFERRED_SIZE)
                        .addGroup(layout.createSequentialGroup()
                            .addComponent(nameAccess)
                            .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                            .addComponent(nameLabel))
                        .addGroup(layout.createSequentialGroup()
                            .addComponent(lastNameAccess)
                            .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                            .addComponent(lastNameLabel))
                        .addGroup(layout.createSequentialGroup()
                            .addComponent(ageAccess)
                            .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                            .addComponent(ageLabel))
                        .addGroup(layout.createSequentialGroup()
                            .addComponent(heightAccess)
                            .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                            .addComponent(heightLabel))
                        .addGroup(layout.createSequentialGroup()
                            .addComponent(weightAccess)
                            .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                            .addComponent(weightLabel))
                        .addGroup(layout.createSequentialGroup()
                            .addComponent(descriptionAccess)
                            .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                            .addComponent(descriptionLabel)))
                    .addContainerGap(151, Short.MAX_VALUE))
            );
            layout.setVerticalGroup(
                layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                .addGroup(layout.createSequentialGroup()
                    .addContainerGap()
                    .addComponent(titleLabel)
                    .addGap(13, 13, 13)
                    .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
                        .addComponent(nameAccess)
                        .addComponent(nameLabel))
                    .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.UNRELATED)
                    .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
                        .addComponent(lastNameAccess)
                        .addComponent(lastNameLabel))
                    .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.UNRELATED)
                    .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
                        .addComponent(ageAccess)
                        .addComponent(ageLabel))
                    .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.UNRELATED)
                    .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
                        .addComponent(heightAccess)
                        .addComponent(heightLabel))
                    .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.UNRELATED)
                    .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
                        .addComponent(weightAccess)
                        .addComponent(weightLabel))
                    .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.UNRELATED)
                    .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
                        .addComponent(descriptionAccess)
                        .addComponent(descriptionLabel))
                    .addContainerGap(139, Short.MAX_VALUE))
            );
    
            pack();
        }// </editor-fold>
    
        /**
         * @param args the command line arguments
         */
        
        public static void main(String args[]) {
            java.awt.EventQueue.invokeLater(new Runnable() {
    
                public void run() {
                    new Profile().setVisible(true);
                }
            });
        }
        // Variables declaration - do not modify
        private javax.swing.JLabel ageAccess;
        private javax.swing.JLabel ageLabel;
        private javax.swing.JLabel descriptionAccess;
        private javax.swing.JLabel descriptionLabel;
        private javax.swing.JLabel heightAccess;
        private javax.swing.JLabel heightLabel;
        private javax.swing.JLabel lastNameAccess;
        private javax.swing.JLabel lastNameLabel;
        private javax.swing.JLabel nameAccess;
        private javax.swing.JLabel nameLabel;
        private javax.swing.JLabel titleLabel;
        private javax.swing.JLabel weightAccess;
        private javax.swing.JLabel weightLabel;
        // End of variables declaration
    }
    Class PasswordDemo:
    import javax.swing.*;
    import java.sql.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.util.Arrays;
    import java.net.*;
    import java.io.*;
    import java.util.Scanner;
    
    public class PasswordDemo extends JPanel
                              implements ActionListener  {
        private static String OK = "ok";
        private static String HELP = "help";
        private static String Register = "Register";
    
        private JFrame controllingFrame; //needed for dialogs
        private JTextField username;
        private JPasswordField passreg;
        private JTextField usernamefield;
        private JPasswordField passwordField;
    
        private javax.swing.JButton jButton1;
        private javax.swing.JButton jButton2;
    
        private JTextField name;
        private JTextField age;
        private JTextField height;
        private JTextField weight;
    
     private javax.swing.JPanel jPanel1;
    
        private void gothere() {
    
                      JFrame f = new JFrame("This is a test");
                      f.setSize(400, 300);
                      Container content = f.getContentPane();
                      content.setBackground(Color.white);
                      content.setLayout(new FlowLayout());
                     // content.add(new JButton("Button 1"));
                      //content.add(new JButton("Button 2"));
                      //
    
    
    
             name = new JTextField("Please put your name here", 20);
              name.setFont(new Font("Serif", Font.PLAIN, 14));
              content.add(name);
    
              age = new JTextField("Please put your age here", 20);
              age.setFont(new Font("Serif", Font.PLAIN, 14));
              content.add(age);
    
              height = new JTextField("Please indicate your height here", 20);
              height.setFont(new Font("Serif", Font.PLAIN, 14));
              content.add(height);
    
              weight = new JTextField("Please indicate your weight here", 20);
              weight.setFont(new Font("Serif", Font.PLAIN, 14));
              content.add(weight);
    
              content.add(new JButton("Submit"));
    
    
               f.setVisible(true);
        }
    
    
         public PasswordDemo(JFrame f) throws Exception {
            //Use the default FlowLayout.
            controllingFrame = f;
    
            //Create everything.
            usernamefield = new JTextField(10);
            usernamefield.setActionCommand(OK);
            usernamefield.addActionListener(this);
    
            passwordField = new JPasswordField(10);
            passwordField.setActionCommand(OK);
            passwordField.addActionListener(this);
    
            passreg = new JPasswordField(10);
            passreg.setActionCommand(Register);
            passreg.addActionListener(this);
    
            username = new JTextField("This is a sentence", 20);
            username.setActionCommand(Register);
            username.addActionListener(this);
    
            JLabel reg = new JLabel("If you are a new contestant please register: \n");
            JLabel user = new JLabel("Username: \n");
            user.setLabelFor(username);
            JLabel pass = new JLabel("Password: \n");
            user.setLabelFor(passreg);
    
    
            JLabel label = new JLabel("Enter your username and password to log in: ");
            label.setLabelFor(usernamefield);
            label.setLabelFor(passwordField);
    
            JComponent buttonPane = createButtonPanel();
    
            //Lay out everything.
            JPanel textPane = new JPanel(new FlowLayout(FlowLayout.TRAILING));
            textPane.add(reg);
            textPane.add(user);
            textPane.add(pass);
            textPane.add(username);
            textPane.add(passreg);
    
            textPane.add(label);
            textPane.add(usernamefield);
            textPane.add(passwordField);
    
    
    
            add(textPane);
            add(buttonPane);
        }
    
        public PasswordDemo() {
              // TODO Auto-generated constructor stub
         }
    
    
         protected JComponent createButtonPanel() {
            JPanel p = new JPanel(new GridLayout(0,1));
            JButton okButton = new JButton("OK");
            JButton helpButton = new JButton("Help");
    
            JButton regButton = new JButton("Register");
    
            okButton.setActionCommand(OK);
            helpButton.setActionCommand(HELP);
            regButton.setActionCommand(Register);
            okButton.addActionListener(this);
            helpButton.addActionListener(this);
            regButton.addActionListener(this);
    
            p.add(okButton);
            p.add(helpButton);
            p.add(regButton);
    
            return p;
        }
    
        public void actionPerformed (ActionEvent e)
        {
            String cmd = e.getActionCommand();
    
            if (OK.equals(cmd)) { //Process the password.   
    
                boolean success=true;                        //Sign In
    
                 String Username="";
                 String Password="";
                 
                 Username = this.usernamefield.getText();
                 Password = this.passwordField.getText();
    
                 try
                 {
                     success=check2(Username,Password);
                }
    
                 catch(Exception d)
                 {
                      System.out.println("Got out");
    
                 }     
    
    
                 if(success)
                 {
                 JOptionPane.showMessageDialog(controllingFrame, "Sign in Successful");
                 
                 
                 Form F = new Form(Username);
                 
                 F.setVisible(true);
                 
                 
                 }
                 else
                 JOptionPane.showMessageDialog(controllingFrame, "Sign in was unsuccessful");     
    
            }
    
            else if(HELP.equals(cmd)) { //The user has asked for help.
                JOptionPane.showMessageDialog(controllingFrame,
                    "You can get the password by searching this example's\n"
                  + "source code for the string \"correctPassword\".\n"
                  + "Or look at the section How to Use Password Fields in\n"
                  + "the components section of The Java Tutorial.");
            }
    
            else if(Register.equals(cmd)) {  //*****************************************************
                 boolean success=true;
    
                 String Username="";
                 String Password="";
    
    
    
                 Username = this.username.getText();
                 Password = this.passreg.getText();
    
    
    
                 try
                 {
                      success=check(Username,Password);
                 }
    
                 catch(Exception d)
                 {
                      System.out.println("Something bad happened");
    
                 }
    
    
                 if(success)
                 JOptionPane.showMessageDialog(controllingFrame, "Registration successful");
    
                 else
                 JOptionPane.showMessageDialog(controllingFrame, "Registration was unsuccessful");
    
    
            }
        }
    
        //Must be called from the event dispatch thread.
        protected void resetFocus() {
            passwordField.requestFocusInWindow();
        }
    
        static void createAndShowGUI() throws Exception {
            //Create and set up the window.
            JFrame frame = new JFrame("Registration Page");
            frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    
            //Create and set up the content pane.
            final PasswordDemo newContentPane = new PasswordDemo(frame);
            newContentPane.setOpaque(true); //content panes must be opaque
            frame.setContentPane(newContentPane);
    
            //Make sure the focus goes to the right component
            //whenever the frame is initially given the focus.
            frame.addWindowListener(new WindowAdapter() {
                public void windowActivated(WindowEvent e) {
                    newContentPane.resetFocus();
                }
            });
    
            //Display the window.
            frame.pack();
            frame.setVisible(true);
        }
        public static void main(String args[]) {
            //Schedule a job for the event dispatch thread:
            //creating and showing this application's GUI.
            SwingUtilities.invokeLater(new Runnable() {
                public void run() {
                    //Turn off metal's use of bold fonts
              UIManager.put("swing.boldMetal", Boolean.FALSE);
              try{
              createAndShowGUI();
              }
    
                catch(Exception e)
                {
    
                }
                }
                     });
                 }
    
        public void sendUserPass(String user,String pass)throws Exception
        {
    
             //Send request
    
    
             Class.forName("com.mysql.jdbc.Driver");
    
              Connection con = DriverManager.getConnection("jdbc:mySql://localhost:3306/Contest","root","");
    
              System.out.println("connected :D:D:D:D");
    
              PreparedStatement state = con.prepareStatement("Insert Into Contestant (USERNAME,PASSWORD) values ('"+user+"','"+pass+"')");
    
              state.executeUpdate();
    
              /*while(Result.next())
              {
                   System.out.println(Result.getString(1)+"\t"+Result.getString(2));
    
              }*/
    
              //server should reply by updating database
        }
    
    
        public boolean check(String user,String pass)throws Exception
        {
    
             //Send request
             Socket Sock = new Socket ("LocalHost",5000);
             
             DataOutputStream toServer = new DataOutputStream(Sock.getOutputStream());
             BufferedReader buff = new BufferedReader(new InputStreamReader(Sock.getInputStream()));
             
             String sentence="";
             
             toServer.writeBytes("1\n");
             
             sentence=buff.readLine();
             
             System.out.println(sentence+"\n");
             
             toServer.writeBytes(user+" "+pass+"\n");
             
             String answer="";
             
             answer = buff.readLine();
             
             if(answer.equals("No"))
                  return false;
             
             return true;
      
             /*Class.forName("com.mysql.jdbc.Driver");
    
              Connection con = DriverManager.getConnection("jdbc:mySql://localhost:3306/Contest","root","");
    
              System.out.println("connected :D:D:D:D");
    
              PreparedStatement state = con.prepareStatement("Select Username From Contestant where '"+user+"'= username");
    
              ResultSet Result = state.executeQuery();
    
              if(!Result.next())
              return true;*/
    
              
    
              //server should reply by updating database
        }
        
        
        public boolean check2(String user,String pass)throws Exception
        {
             Socket Sock = new Socket("localhost",5000);
             
             DataOutputStream toServer = new DataOutputStream (Sock.getOutputStream());
             BufferedReader buff = new BufferedReader(new InputStreamReader(Sock.getInputStream()));
             
             toServer.writeBytes("2\n");
             
             System.out.println("Well I sent the message");
             
             String sentence = buff.readLine();
             
             toServer.writeBytes(user+" "+pass+"\n");
             
             System.out.println(sentence);
             
             sentence=buff.readLine();
             
             System.out.println(sentence+"\n");
             
             
             if(sentence.equals("No"))
                  return false;
             
             return true;
        }
    
    
    }
    Profile p = Profile();
    

    Who says "call a 'Profile' method name that is defined in the current class"

    Maybe what you mean is:

    Profile p = new Profile();
    

    who says "create a new instance of the profile class and invoke its no. - arg constructor."

  • 'Pull out' black and pms for prepress?

    Help please?

    I work in Illustrator CS4 and finished 2 faces mailer/postcard for a customer in CMYK mode. After you send the final PDF to the customer, the customer has responded back to me with the request to their print provider for - "native file, with black and PMS burst." 

    First - the file has been set up as CMYK, so I am asuming this is partly a lazy response/request? (not realizing it was created as a CMYK).

    Second - I usually I send the commercial providers of print files in PDF format (quality of print or PDF / x: 1 has) - isn't it enough for them - and why?

    I appreciate any idea on this for my own edification, and I would like to know if they asked for it because they don't have certain abilities to 'out' on their end? ... OR if it is because the files PDF does not provide editable (I thought they did)?

    Finally, I would like more particularly know what measures should I take to prepare CMYK "exploded".  (Step by step please?)

    Thank you much in advance.

    Chemol

    From my experience, when a print provider requests a color "exploded" there simply want you to provide numbers that you want to match. For example, if there is a Pantone color, they only tell you what is this color number. In this way they can match the number based on the used stock. Of course, if there is no Pantone, you wouldn't 'out' Pantone colors. They might also want to run the job as a job of 5 color and want allows you to specify the Pantone color, you want to use as the 5th color (probably green).

    The dark, they can just ask you to clarify this that black you used... they allow to check the fillings will meet their needs. Or that there even rich black present.

    Regarding the native file... they may want to change the colors for the best output at their end - color correct photos in response to their environment, etc. There the customization on the piece? You know "Dear "? If there is that this could easily account for the need of native, especially if the customization is somewhat mixed, overprinted, or files taken from the trap of other colors.

    Truth is... it's all guessing without direct communication with the printer. PDF/X-1 should be enough... but there may be very good reasons why the printer asks whether they are, especially if they are well known, large scale, printing house.

    I never hesitate to find refuge impression with their applications... I will not hesitate to provide any customer with native files, however.

  • I just pulled out a flash drive without eject!

    I am technically challenged!  I just released flash drive without ejecting it.  I put it back in, but he does not appear.  Can we do anything?

    Reboot and you'll probably be back in business again.

    If you use a hub, it might be prudent to USB devices (1) draw their connectors, (2) to zero and (3) re - insert the USB devices. This resets the USB card.

  • Sound won't speakers when headphones are pulled out.

    When I watch the video in flash and connect my headset, I can not everything in FF without having to restart the program. And when I close the process is still running. But when I stop the process in Task Manager, then start it again I can hear the sound again. It is extremely annoying! It's weird that other programs on my computer can play on different sources, but if I lean back and my helmet falls, Firefox can not play all the sounds until you restart against his will...

    There is a Bug filed on a question like that.

    https://Bugzilla.Mozilla.org/show_bug.cgi?id=698079

    Must be confirmed as to if it's just a problem of Flash (with plugins) or if it happens with audio played directly through Firefox, do not use a plugin.

  • Want to DIAdem units pull out of my RAW file and save as avenues of treatment

    I'm new to tiara if I appreciate any help offered.

    My data (.txt) comes in the first line is my name of the desired channel, the second line is unity, and then the remaining lines are all my data. I'm trying to configure the wizard to import .txt so that it takes the unit off the data line and records as a unit in the channel property, for all channels (not all channels hae the same unit). How can I do this?

    Thanks for your help

    jmcnally,

    Change the type of line 2 to channel, and then click next two times, and you'll be in the channel properties window. Here, you can set the first row to the name and the second row to the unit.

    Think of the lines that you select in the window of the file as property group Structure, and properties of channel data. The name and unit are the channel properties.

    I hope this helps!

    Michael

Maybe you are looking for

  • How to delete pages of backup thunderbird

    I save copies of receipts by using Save as t/bird that they are registered as a page web t/bird in a folder in my documents (Windows 7 pro).Now, I want to delete some when I click right delete isn't on the list.

  • Satellite U200 getting more slower and slower - 5 minutes to stop

    My U200 becomes slower and slower - 5 minutes to stop! and now it crashes when I try to install the drivers for "Cakewalk Sonar THE"- so I need help. I think I need to re - install Windows XP, however, I only got a "recovery disc" with the laptop - w

  • front side bus at 800 mhz on P25S-507

    How does help the 800 mhz fsb? And why they use no memory Ram pc-2100. You would think they would use the faster memory of pc-3200. Thank you

  • My Y510 is unable to connect with WiFi need to reset the modem, and sometimes both

    Hello My Y510 sometimes does not connect if my Wi - Fi if one of them started earlier then the other, I went to the media and automatic downloads to make the drivers and software upgrades through its tells me that all devices need update is no update

  • update configuration

    Without warning, my phone closes all applications and a message "Configuring updates step 2 of 3 do not turn off your computer" the computer then stops and restarts automatically. A second message appears "Configuring updates step 3 of 3'. How can I