Poor supported for string functions in ExtendScript Javascript?

Similar Questions

• Search for strings of text using javascript

  There are some tutorials on this subject, but none seems to help me find specific text.

  
  

  Imagine the text above is part of a paragraph in a pdf document. I want to find the wordssubject ', 'appear ' & 'specific '.

  The idea then is to use a Automator workflow that will copy the file into a hot folder, open in acrobat, find the text, highlight it with another javascript I have and then move it to a folder 'full'.

  I had much rather create an action to find the text and highlight it, but you can't import Acrobat action in Automator!

  Any advice would be appreciated, because I'm stuck!

  Cheers in advance

  To search for specific words in a file, you need to loop through all the pages of

  the file, and then on the words on each page, then compare the words to your

  list of "target".

  However, you cannot use Acrobat as part of a workflow like you

  Describes.

• Your browser is not supported for this program. This program is expected to be launched above IE4 version!

  The provider's Web site will not reflect orders/quotes...
  We get this message
  "Your browser is not supported for this program.
  This program is expected to be launched above IE4 version! »

  URL of affected sites

  http://

  To work around this problem, you can also try using the User Agent Switcher add-on to give the impression that you are using IE on the site.

  You can contact the site owner to inform them of their poor support for Firefox.

  Alternatively, you can report a broken help site.

• Apple support has been unable to solve my problem with iTunes not responding do not. He started all of a sudden. A few weeks after I've upgraded to Windows 10. Reinstalles/uninstalled iTunes and nothing. Now, I can't even Apple support for help.

  All the sudden, iTunes has stopped responding. I click top and nothing. I spent over an hour with a Senior Engineer at Apple's Support, which does not give me a ticket number so now Apple can't even find the person I talked to. This person had to remember and it's been 2 weeks. I called Apple back Support and since they can't find a ticket number they told me that I have to wait until this person reminds me. This engineer had me remove and reinstall iTunes with all the other components that go with it, I run it as administrator, pretty much did all the troubleshooting I had done on my own. I have now to sit and wait, hoping that this senior engineer at Apple called me back. It's poor and poor support for iTunes. If anyone has any advice, please share.

  Thank you

  These can be things that you've already tried. Despite this, it might be interesting to try again. As another poster has said recently, though for another problem, "20th try was the charm.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• JavaScript string functions

  Implementation of javascript Photoshop supports the string as split() functions?  I was trying to blow up the file name of the document by the _ character (name of my file contain many of these).  If I can't use split... is there another way to do it?

  Yes split is supported...

  var str = "This_is_a_test";
  Str = Str.Split ('_');
  alert (str [3] + "" + str [0] .toLowerCase () + "" + str [1]);

• Require the browser Plugin with XFA Support for Government Web Sites

  Most of the Government sites I need to use on a regular basis now publishes all their forms to PDF with XFA, a popular this time of year is the income tax.  This is reasonable, because there is no generally available to this end alternative file format.  However, Adobe provides is no longer a browser plugin Acrobat for Firefox or Chrome on Linux.  I cannot access these electronic forms.  I tried using the plug 9.5 Acrobat is no longer supported in, but it is broken in the latest version of Firefox (printing does not work).  There is no other plugin I can find that supports PDF with XFA forms.  How can I regain access to these forms.  When I try all I get a message telling me to install the plugin from Adobe Acrobat (nonexistent).

  My last word: I discovered Adobe have created a road map to get away from delivery of the XFA form where it is not supported.

  According to https://helpx.adobe.com/livecycle/kb/xfa-forms-firefox-chrome.html

  "ES4 LiveCycle support for rendering in HTML5 XFA forms, such as forms can be opened in browsers that support HTML5, including those running on mobile devices like the iPad. The rendering of the HTML5 forms maintains available to the form design and supports most logical form (for example, JavaScript, form calc and form validations) incorporated in the XFA form template. In this way, your technology investments in XFA forms are easily carried over to devices where the functioning of the Adobe Reader plugin is not possible. »

  If the creators of XFA forms should be knowing this.

• OEDQ support for the AV tools

  Hello

  Please someone let me know tools of support for OEDQ AV except Loqate and QAS.

  Thanks in advance.

  Concerning

  Deborah

  External web services call is usually to the Disqualification by using a Script Processor (to where the script used depends on the web service interface). Note that the Script processor is limited to a single output, so normally, if multiple attributes are returned, they are returned in a table attribute, then split later. If you need to do something more advanced than this, you will need to write a new processor in Disqualification - we can tell you this if necessary.

  It is easier to illustrate the approach of Script for example.

  Here is an example of a legend to a code search service postal sample of GeoNames.org. It is a Script processor that takes three inputs (zip code and the country of the attributes of string and a number of maxresults attribute). It returns the results in a table.

  addLibrary ("http");

  Function GetValue (content, name) {}

  var value = "";

  startPos = content.indexOf ("<" +="" name="" +="" "="">") var;

  If (startPos >-1) {}

  endPos var = content.indexOf ("", startPos);

  value = content.substring (startPos + name.length + 2, endPos);

  }

  Returns the value;

  }

  function GetCDATAValue (content, name) {}

  var value = GetValue (content, name);

  If (value.indexOf ("))

  return value.substr (9, value.length - 12);

  on the other

  Returns the value;

  }

  try {}

  var result = new Array();

  var url = "http://api.geonames.org/postalCodeSearch?postalcode=" + input1 [0] + '& country =' + input1 [1] + '& LignesMax =' + input1 [2] + "& username = demo;

  var xmlHttp = new XMLHttpRequest();

  XMLHTTP.open("get",URL,true) ("GET", url, false);

  xmlHttp.send ();

  var response = "' + xmlHttp.responseXML;

  startPos = response.indexOf var (" ");

  while (startPos > -1) {

  var endPos = response.indexOf(" ", startPos);

  var record = response.substring (startPos, endPos);

  var postalcode = GetValue (record, 'postal code');

  var name = GetValue (record, "name");

  var countryCode = GetValue (record, 'postal code');

  var lat = GetValue (record, "lat");

  var lng = GetValue (file, "lng");

  var adminCode1 = GetValue (record, "adminCode1");

  var adminName1 = GetValue (record, "adminName1");

  var adminCode2 = GetValue (record, "adminCode2");

  var adminName2 = GetValue (record, "adminName2");

  var adminCode3 = GetValue (record, "adminCode3");

  var adminName3 = GetValue (record, "adminName3");

  result [result. Length] = zip + "|" +.

  name + "" + |

  Country code + "|" +.

  LAT + ' | ' +.

  LNG + "|" +.

  adminCode1 + "|" +.

  adminName1 + "|" +.

  adminCode2 + "|" +.

  adminName2 + "|" +.

  adminCode3 + "|" +.

  adminName3;

  startPos = response.indexOf var (')", endPos);

  }

  } catch (e) {

  result[result.length] = "Error: " + e.toString();

  }

  output1 = result;

• Support for Windows 10 in Qosmio X 70 - has

  Hello

  I have a X 70-a, and according to the plan of Toshiba support, full support for Windows 10 only will be available January 31, 2016 ('coz that's what you get when you pay 1500-2000 euros for a cell phone, right?)

  Any who tried to win 10 on a similar laptop? Personally, I don't see what is the hold up and do not understand why they need half a year to offer support because most of the drivers Windows 8.1 should be available (assuming that they were well written in the first place).

  "That's what I get for a laptop of 1,500 euros" is exactly what I had in mind when searching for this Web site in order to get my windows 10 drivers only to find out that I am not on the priority of Toshiba.

  Keep the windows 10 update has an option to restore your old windows for a month (available in recovery at startup menu), I took the plunge by installing Windows on my 770 - 13F X 10.

  Here are the problems I encountered (I guess I'll find out later):

  -Windows installed a bad driver for the wifi adapter (Qualcomm Atheros) that makes the BSOD on startup. I manually installed a Windows 8.1 driver found on a non official (atheros.cz) in safe mode, with a second PC and a USB key.
  Win 10 then start over, but I can not activate wifi, both front panel and fn + F8 key for wifi doesn't seem to work. If anyone has a solution or just a hint...

  -The main Win 10 Search bar doesn't seem to be functional. It's weird and annoying.

• Support for 64-bit driver for Windows 7 for Deskjet 6540 and Colorsmart D5360

  Or 64-bit Windows 7 drivers for the Deskjet 6540 nor the Photosmart 5360 supports the maintenance function is now impossible to clean the print heads. Two of these printers worked fine when they were connected to my XP machine. At HP dumbed down these drivers? Is there a separate program or sequence of façade which will do that for one of these printers?

  Thank you

  I do not know the D5630, but for the Deskjet 6540 you can do a cycle of cleaning of the façade, as follows: turn on the printer.  Press in and hold the power button, then press the Cancel (X) button twice, then release the power button.

  Note that it rare to * never * need to perform a cleaning on the HP cartridges cycle, it would be unusual to the same need forced into the life of the cleaning cartridge.  Perform unnecessary cleaning cycles will use ink and shorten the life of the printer.

• Support for Windows 7 to VGN-SZ49

  Where can I find Windows 7 support and drivers for my VGN SZ491N? I waited for a year! My S1/S2 special function buttons do not work. Help, please.

  I went through hell with Sony, trying to get suopport for my VGN-FZ290 in order to upgrade to Windows 7. Their Web site indicates clearly that it is upgraded to Windows 7. I contacted the support team and they asured me it ws possible. After the purchase of the software and install it, I discovered that they had no drivers for the graphics card. All they have done is to try and sell me a service contract, saying that they could fix it if I paid them several hundred dollars.
  I have two Dell laptops much older, I easily upgraded to Windows to Vista. Reference Dell fully supports their customers with Windows 7 drivers.
  After a 3 month wait for a response from Sony they came back and told me too bad we will not offer you any Windows 7 driver support for my laptop. They had even the aodacity to wanted to sell me the original Vista operating system, I had to delete them when I did a clean install they recommend to do during the installation of Windows 7.
  I was a big advocate of Sony before these problems. All my electronics TVs camerias ect. Now I can't say that I always have to pay more for a Sony computer when they abanioned you 1 year out for driver for assistance.
  I'll have to recommend Dell for all computers, if you want the driver software updates. All Sony wants to do is sell you services and new computers and for their support in my view stinks.

• error: implicit declaration of function 'GetActiveProcessorCount' is not valid in C99. Make sure that you include the prototype for the function.

  I get the following error:

  error: implicit declaration of function 'GetActiveProcessorCount' is not valid in C99. Make sure that you include the prototype for the function.

  I've included windows.h

  which includes winbase.h

  Winbase.h contains the prototype for the function in the above error message.

  If I disable 'Require the function prototypes' and 'Building with the C99 extensions', I get the following error:

  error: Undefined symbol "_GetActiveProcessorCount" referenced in "c:\Users\Public\Documents\National Instruments\CVI\HDLC\cvibuild. HDLC_RandD\Debug\HDLC_RandD.obj ".

  I work in the ICB 2013 SP2.

  Why I get this error.

  This function is only valid in Windows 7 and later versions. Because the ICB 2013 still supports Windows XP, this feature is excluded by default from Windows headers that are provided with CVI. If you do not need to worry about the versions of Windows prior to Windows 7, however, you can include it yourself, by adding the following macro in the dialog box options generation CVI (be sure to include for all configurations):

  

• Is there a bug in CVI 2010 SetTableCellRangeVals and SetTableCellRangeAttribute for strings - particularly in 64-bit mode?

  It seems that I can't get SetTableCellRangeVals to publish string data to a table in 32-bit mode, I can't SetTableCellRangeAttribute to work for arrays of strings and now it seems numbers either. I just get garbage - it could be my code, however.

  Worse in 64-bit mode, I can't seem to post anything (for strings at least), but get a GP fault instead.

  I played with the size of the pointer in the array of strings (from 4 to 8 bytes

  The heart of the test code is here but the files are attached as well.

  int CVICALLBACK Test_callback (int, int int event, control panel,
  void * callbackData, int eventData1, int eventData2)
  {
  int i, numrows = 10, byattrib;
  int bit32 = 1;
  Double * dbl_array;
  char * string_array, * string;
  Rect a_rect;
   
  switch (event)
  {
  case EVENT_COMMIT:
  GetCtrlVal (main_handle, PANEL_BYATTRIB, & byattrib);
  String = malloc (50 * sizeof (char));
  If (bit32)
  string_array = malloc (4 * numrows * sizeof (char));
  on the other
  string_array = malloc (8 * numrows * sizeof (char));
  for (i = 0; i< numrows;="">
  string_array [i] = malloc (50 * sizeof (char));
  dbl_array = malloc (numrows * sizeof (double));
     
  for (i = 0; i< numrows;="">
  {
  dbl_array [i] = i * I * 3.1416.
  FMT (string, "The value is %f", dbl_array [i]);
  strcpy ([i] string_array, string);
  }
     
  a_rect. Top = 1;
  a_rect. Left = 1;
  a_rect. Height = numrows;
  a_rect. Width = 1;
     
  status = DeleteTableRows (main_handle, PANEL_TABLE, 1, -1);
     
  status = InsertTableRows (main_handle, PANEL_TABLE,-1, numrows, VAL_USE_MASTER_CELL_TYPE);
     
  If (byattrib)
  {
  status = SetTableCellRangeAttribute (main_handle, PANEL_TABLE, a_rect, ATTR_CTRL_VAL, dbl_array);
     
  a_rect. Left = 2;
  status = SetTableCellRangeAttribute (main_handle, PANEL_TABLE, a_rect, ATTR_CTRL_VAL, string_array);
  }
     
  on the other
  {
  status = SetTableCellRangeVals (main_handle, PANEL_TABLE, a_rect, dbl_array, VAL_ROW_MAJOR);
     
  a_rect. Left = 2;
  status = SetTableCellRangeVals (main_handle, PANEL_TABLE, a_rect, string_array, VAL_ROW_MAJOR);
  }
     
  free (string);
  for (i = 0; i< numrows;="">
  free (string_array [i]);
  free (string_array);
  free (dbl_array);
  break;
  }
  return 0;
  }

  Thanks for any help,

  Greg

  Greg-

  Certainly, you have found a bug.  However, I think that the issues that you run in a SetTableCellRangeAttribute are the result of a misunderstanding of the function.  This function, when you use it to set the value, sets the values of all the cells in the range to the same value.  Therefore, the var_args parameter must be the value that you want to set all cells to and not a pointer to an array of values.  In your code, you would need dereference the berries, and then, you would see that all the cells are the same value, which is the expected behavior.

  I created a bug report for the accident which follows from the definition of values on string cell types in 64 - bit with ID 284842.  This bug will be fixed in the next version of maintenace of the CVI.  In the meantime, you should be able to use SetTableCellVal to set the value of each cell individually in 64-bit.

  I'm sorry for the inconvenience-

  NickB

  National Instruments

• Question about support for LabVIEW DLLS and Unicode

  Hello

  I have a question about LabVIEW and DLL functions calls.

  I use a DLL (sorry, I can't share it) that was written in C. It was written to support Unicode and non-Unicode function calls.

  The Unicode function is valid, then FunctionNameW is called if FunctionNameA is called.

  I am building a few VI to access the library. I have the regular functions of FunctionNameA work.

  My question is, does LabVIEW support versions of function FunctionNameW Unicode, and if so is it necessary Although LabVIEW is already working with the standard function call?

  Am I being redundant or what should I build in Unicode support?

  The first time I tried to test the Unicode functions, I had an error, and I guess this is a system setting.

  Thank you for your time in advance.

  DB_IQ wrote:

  I don't think I have TO implement the Unicode, but I want if I can.

  For what I do, I think almost it is not serious. But I wanted to know if it could be used.

  The short answer is "Yes, you can do it."  However, it may open a new Pandora's box.  If you're not careful, problems and complications that can still spread to other projects that are not using Unicode!  It is better not to summon this monster unless there is absolutely no other way to do the job.

• Pavilion g6-1050-st: no support for my product?

  Hello.

  I tried to configure my laptop so I can use the switchable graphics feature since I was 2 GPU. My Catalyst Control Center UI does not show this feature. I've tried 5 or 6 different guides to solve this problem, but no success. I came to the conclusion that I need to upgrade my GPU of HP website drivers, that I can't find.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-1000-Notebook-PC-series/5046257/model...

  No GPU driver? Why is this and where to find them?

  Next part of my question, I tried upgrading the BIOS with update the link, don't still no dynamic-fixed choice given. I tried to download the older AMD drivers, still no switchable graphics in CCC. What should I do to see this feature?

  Thank you.

  Edit: My (g6 1050st) product is not in this list, given in sticky thread:

  http://support.HP.com/tr-TR/document/c02948560

  So I did not date this driver BIOS, I updated one given in my product page. But I have used graphics switchable back in Windows 7. So what can be my problem?

  Hi there @Onat

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand you are trying to get switchable graphics with your current configuration. I'm happy to help you with this.

  Check the product page, it seems that Windows 8.1 is not among the operating systems supported for this laptop. There are a few pilots of Windows 8, but as you say it's not for graphics cards. As for the BIOS, when it comes to laptops and laptop computers, it is common to lock certain options available on desktop computers, because they can cause serious problems with heat and performance on a laptop. Dynamic mode is one of the people often locked and switchable graphics, fixed - function is controlled by the system, as is the video memory available.

  The lack of a custom driver, your best option may be to go back to Windows 7, use the one for her. What follows is the driver which includes two graphics processors for Windows 7.

  AMD HD graphics driver

  I hope this helps. If you have any other questions let me know.

• no support for cm1312 MFP scanning

  Product - HP CM1312 MFP color laser printer

  Operating system - OS X Lion

  HP Director does not open, says he is damaged or incomplete.  System report says no support for scanning.  Have loaded the software twice, still no luck.  Connected to ia USB cable

  Hello

  Make sure that you install the software of the Lion... install any previous software will be appear to be installed but is not functional:

  Firstm repair disk permissions in order to deny any permissions issue related to the installation:

  1. 1. open the Applications folder.
     2. go to the Utilities folder.
     3. double-click on disk utility.
     4 Select the hard disk that contains the boot volume.
     5. go to the first aid tab and select Repair disk permissions.
     Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete. :
  2. Download and install the Lion below:http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=t2-100706-1&taskId=135&swLang=8&swEnvOID=4114&prodNameId=3558903&lang=en&cc=us&mode=2&