Port USB Z30 blackBerry problem

Similar Questions

• Drive USB Z30 blackBerry for Blackberry

  I need to transfer data from my old laptop (which happens at the end of his life).

  How can I connect the USB to my Z30

  Thank you

  http://www.Amazon.com/BlackBerry-micro-USB-data-transfer-connecting-compatible/DP/B00OKZ0HQS

  is that you need to access the files on the USB key with your Z30

• Z30 blackBerry problem restart my Z30

  I had problems with my apps won't start... then I rebooted my Z30

  However, now all I see is Blackbaerry on htescreen and it EE does not start! any tips?

  I had this legacy of less than two months and give it my problem in the first week with only accepts no not my password and I had to reset device htat after a week!

  Try holding volume up and volume down at the same time hard reset the phone... see if that lets you further along?

• Porting Android to Blackberry - problem with BES 10.

  We basically followed the procedure complete transfer and now stuck to a particular issue.

  Focused binary (.bar format) is not able to be pushed from the Server BES 10.

  After looking at the site, we found that side load door applications are not supported in the perimeter business.

  Want to know if there is that no alternative is available because our primary use case is for the client company.

  Appreciate your help in advance.

  Hello

  Support for the Android apps and sideloading in the corporate workspace is not supported. He is regardless of version 10 of BES.

  Thank you

  Matt

• Problem connecting USB of blackBerry Smartphones

  I have a Curve 8330. Using Windows XP with the latest version of Blackberry Desktop (4.7).

  Neither the computer or the software BB, see the curve connected. No error message, just no connection. Good ports, cable and also installed the latest drivers USB of Blackberry Web site.

  Any ideas, please?

  Hello.

  Check the 8330 for debris or dirt in the USB port.

  If it's clean, it may be a hardware problem. Take it to the carrier and have then try

  to access via the USB port.

  Thank you

  Bifocals

  Don't forget to adjust your thread.

  Put the check mark in the green box containing your answer! Thank you

• Network adapter/USB Port on Windows 7 problems

  So basically, I moved to another House and after do not use my PC for a while something happened my usb port, either my adapter or Windows.

  My computer at the front has 2 ports, usb 3.0 port and a normal USB port that does not for a long time now (broken). At the rear, I 2 s 3.0 and 4 more normal. On my iPad, internet is fast, 35 Mbps download and upload 13. On my PC, once I log on the 3.0 in the front port, nothing happens. Windows can not find anything, do not help convenience stores. I have always used this port before, and the connection was great, although now he doesn't seem to see anything. At the rear, the normal USB ports give me a 0, 50-1, 00 Mbps download and upload, the 3.0 s give me like speed of 2, 50 - 4.00. It worked really better before on the front port, I tried the system restore... That's happened? All the patches? I need really better internet for my PC.

  Roju salvation,

  Please contact Microsoft Community. I've surely you will help solve this problem.

  To better understand the issue, I would need more information on your side.

  1. What is the number of brand and model of the computer?

  2 do you meet any question when you connect other USB devices in the front port?

  3. What are all the troubleshooters that you tried?

  4. do you receive any error messages?

  This problem might have occurred because of these reasons:

  1. corrupted driver.

  2. hardware issue.

  Try the steps listed here:

  Method 1:
  I suggest you to download and install the driver network and chipset on the computer manufacturer website and check if it helps.

  Method 2:
  If the problem persists, I suggest to uninstall and reinstall the Device Manager USB controllers and check to see if it helps.

  (a) press on the Windows key + R, type devmgmt.msc.

  (b) expand USB controllers, click drivers.

  (c) click on Properties, click on the Uninstall tab.

  (d) click OK.

  Note: restart the computer and it will update automatically pilots.

  Check out the link for more information.

  Tips for solving problems with USB devices (applies to Windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Ports USB 43 problem error code

  On a port USB is not recognized. Error code 43. I have four USB Port on the laptop. Three on the left and right and the other on the back. All have failed to recognize the devices. I tried in vain to run the programe "Fix it." Operating system is Windows 7 Ultimate

  Hi CosmosOmondi,

  What is the number and the model of your laptop?

  Windows has stopped this device because it has reported problems. (Code 43)

  Method 1: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and windows will automatically reinstall all USB controllers.

  
  Method 2: the motherboard\chipset to the latest driver update.

  Note: Please check with the manufacturer of motherboard\computer before you install the driver.

  Method 3: You can see the steps mentioned in the link below

  Tips-for-solving-problems-with-USB-devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  (Article applies to Windows Vista, not valid for Windows 7)

  Method 4: You can view the documentation for the hardware for more information about diagnosing the problem.

• HP Pavilion: Before port USB on HP desktop computer has stopped working

  My HP desktop computer is about 2 years old and has two USB ports on the front and a number on the back. I had no problem with any of the ports until I used a USB in the port now broken and caused a power outage that now this port doesn't recognize any USB device.  It says "USB device not recognized.  The last USB device you connected to this computer worked badly and Windows does not recognize. »

  I tried to uninstall and reinstall the USB ports on the Device Manager and have lived all the suggestions on the HP support site and the Microsoft support site. The defective USB key must have caused damage to the track. I hope you can suggest something that I can do to get it working again.

  Hello

  The only port on the front is damaged. The USB key must have damaged only this USB port. I'd like to reuse this memory bar.

  You need to replace the USB module, two ports USB 3.0 of housing as the two front ports use the same module and connections to the motherboard.

  You will probably need to go to HP for the part.

  You should be able to get access to the component by removing the front bezel. Remove the side panel also. You should see the connection of the cable and add him the USB 3.0 connector front on the motherboard.

  Jay

• HP Pavilion dv6-6135dx USB 3.0 problems

  Recently bought this laptop, I like it, it works fine.

  I reformatted about the day that I got this laptop. However, I can't get USB 2 ports on the left side of the laptop to work, I guess it is the USB 3.0 ports. The two USB ports on the right side of the laptop work well, I guess they are USB 2.0 ports. It's probably missing drivers.

  I tried to download Renesas Electronics USB 3.0 host controller driverthe HP support Web site. It does not work. After installing and running the utility USB 3.0 host controller that it installs, a small dialog box appears which says 'not found USB 3.0 host controller '.

  In Device Manager, I have two devices that have yellow exclamation points. One is listed as Controller of Bus SM, the other is listed as unknown device. The hardware ID for those who are:

  SM Bus controller:

  PCI\VEN_1022 & DEV_780B & SUBSYS_358D103C & REV_13

  PCI\VEN_1022 & DEV_780B & SUBSYS_358D103C

  PCI\VEN_1022 & DEV_780B & CC_0C0500

  PCI\VEN_1022 & DEV_780B & CC_0C05

  Unknown device:

  USB\VID_138A & PID_0018 & REV_0078

  USB\VID_138A & PID_0018

  Windows Update cannot find something for these two. I also tried to manually select the following drivers for the unknown device and the unit still does not start:

  1. Renesas Electronics USB 3.0 Host Controller

  2. Renesas Electronics USB 3.0 Hub

  3. Renesas Electronics hub USB 3.0

  4. Renesas Electronics USB Hub

  Although I'm not too worried about the SM Bus controller, mainly because I have no idea what its purpose is, I suppose that the ports USB 3.0 is the unknown device because of the hardware ID. Help please!

  The problem is that HP is not labeled correctly pilots. USB 3.0 drivers they have under "Chipset" do NOT allow the ports under Windows 7 on the DV6-6135DX. I discovered this way lasts as well as others.

  I replaced the hard drive and decided to use a generic version of Windows 7 to avoid the HP bloatware. After installation, port USB3 drivers have not been installed and install the package of the chipset section has nothing. Then I found a thread at Notebookreview.com where someone told me where were the USB drivers.

  The drivers for the USB 3.0/chipset ports are rolled in the driver VIDEO package. After you have installed the package of video drivers, my USB 3.0 ports worked. I then installed a video driver up to date from the AMD website and I'm good to go.

  Nowhere on the HP driver page it mentions that USB 3.0 drivers are actually part of the package of video drivers. I had to find the info from a thread at Notebookreview.com. Do not this way. HP should be out pilots in 2 packages and put them in the appropriate section, or put some type of ticket in the chipset section on where the chipset drivers are really.

• Pavilion dv5 2048la: not working touchpad (keyboard/mouse) and port usb but turns on properly

  I started to clear some files in the main C: files then the touchpad did not find the (ordrivers of controllers) and I used a usb mouse. But now this does not work since the only time where that I turned off the computer and then when I turned it on it has stopped working also. Even if I have to do something more professional, I would like the answers. Also CD rom does not work a long time ago. Help, please

  Alex-Simball

  Hello;
  
  Let me welcome you on the HP forums!
  
  I hate to be the bearer of bad news, but you are in a really difficult situation that's going to be almost impossible to fix.

  First, there are the ways, if you have the Windows installation media, to repair missing system files - but you probably don't have that, and even if you did, your optical drive would have to work in order to be able to read the media.

  Second, you may want to restore your PC to its original state using HP recovery media, but there are two problems with this: (1) HP stores not more to your PC and your optical drive would need to work in order to use it (2) is a set of a DVD and a CD.

  To restore your PC to the operating status, you'll need to be able to start using Windows disc media.  One way that COULD work is if you use an external DVD/CD drive plugged into a port USB - but for this to work, your PC must be bootable (1) and (2) be able to boot from USB.  IF these two are not true, then you can not restore it - the way it is.

  Here are a few troubleshooting steps when your PC won't start - you can try them and see if everything works: computer won't start (Windows 7, Vista, XP) | HP® customer support

  Maybe something in this package of measures will work.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• ThinkPad W701 - deleted BIOS, USB/Esata mysterious problems before update

  Hello

  Yesterday I was supposed to tto try my new external drive esata, I had previously used with my EX495 homeserver, without any problem.

  But when I connected to the W701 it seemed that the connection has failed and the drive fell to sleep when I tried to write for her. When I used USB it worked perfectly and with the esata Server worked without a hitch.

  After trying some time, I decided to try the lacie updater and then a reboot. After that, all ports usb failed.

  I had already watched the Lenovo updateprogram and found some updates, so I ordered the computer with the trackpad and updated, but when the computer suddenly restarted and screen shows underscore flashing and that's it. After that, the screen went black and no longer lights.

  I it for 4-5 weeks now and after 1 week the Mo failed when defining new ram and has passed, there is now not yet - is there anything I could to, or should it return service?

  I did not help - Lenovo replaces the MB, at least this start.

• HP pavilion slimline s5220y: the 6-in-1 card reader combo - headphone and microphone ports usb plug

  where can I buy a combo of 6-one - with ports usb memory card reader and headphone and microphone jack. I can't find any place that has always part

  Goodrock, welcome to the forum.

  Because the computer is almost 7 years old, I don't think that HP will have parts.  In my opinion, your best option is to buy an external card reader and card internal with USB ports.  Headphone and microphone sockets will be difficult to replace, or not at all.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

  Original title: USB device not recognized

  Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

  Hello

  (1) is the specific question of specific USB devices?
  (2) did you of recent changes to the computer before the show?
  (3) have you tried plugging the USB stick on another computer?

  (4) what is the brand and model of the computer?

  I suggest to refer to the following methods and check if it helps to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  Run Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: USB Port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

  Reference:--

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• Ports USB 3.0 on Pavilion hp8 - 1070t does not

  Just bought a HP Pavilion HPE h8xt (also called hp8 - 1070-t) with the player 15-in-1 memory card, 4-port USB 2.0 (front), audio, 2 USB (rear-facing top of page).  The upper part (rear panel) USB ports are USB 3.0.  They do not work.  Device Manager reports "this device does not work properly because Windows cannot load the required drivers for the device (Code 31)." These ports are detached from the motherboard (IPIS8-CH2).  The pilot is reported as < tihub3.sys=""> . HP support wants me to a full recovery, but it's a waste of work of three days that I am not willing to take as every other thing on the machine works.  People tell me that others have had this problem with this device.  Someone at - he found a solution?

  HP support has not been able to find me that the right chip drivers, which gives me sp4787.exe.

  Hello

  When you plug the USB 3.0 on a USB 2.0 device, you should see the following message is displayed:

  

  Now if you do not see this message then the USB 2.0 controller is probably not setup in device management to provide notification.

  You can also download PC Wizard (it's a gift) and it will give you more information about your USB 3.0 controller.

  

  So, how do you know if your USB 3.0 really works your expectations?

  Download HD Tune and the reference device when it is plugged into a USB 2.0 port and a USB 3.0 port. There should be a difference. You may or may not like the difference.

  I compared my USB 3.0 flash drive and it is 60% faster on the USB 3.0 port.

• WRT610N with HD on port USB + WD TV Live on the network

  Hello

  Since the WD TV Live, I can share everything and I can see it on the net. I can see on the port USB WRT610N of WD TV live HD, but I can't, I don't see the files. Is access, no username and PSW is required when trying to get into the HD media server, any required access data.

  Anty help? Thank you

  Well, the problem has been resolved. Now, you can browse WD to the HD router with any problem. Therefore, the settings on the working document that was required.