Portege R100 - cannot use F10 and F11 key

Similar Questions

• H Envy 17: HP Envy 17: F9, F10 and F11 keys stop working

  Hit f9 - f11 keys on my keyboard control my music.

  • F9 = previous track
  • F10 = play/pause
  • F11 = next track

  It worked well upward until a few days ago. Now, they don't work at all. I also tried combining them with the fn key, but do not work yet.

  I'd really like to help, try to understand it. I use these keys frequently, and it's starting to really annoy me.

  I don't know what information is necessary, but here's what I found:

  Product name: HP ENVY 17 Notebook PC
  Product number: G0U21AV
  BIOS: F.34-12/19/2014
  Keyboard review: 77.35
  Total memory: 12.00 GB
  Name of the processor: Intel Core i7-4710HQ CPU @ 2.50 GHz

  I tried your first proposal and did not get anywhere. However, I played around a little more with different combinations of keys, and I found a combination that works! For anyone else having this same problem, try pressing the following key combinations:

  FN + alt + f9

  FN + alt + f10

  FN + alt + f11

  Thanks for your help!

• My Fn key and F10 and F11 keys is no longer the brightness of my screen

  I the IQ816 [vista] and now will not fit using the method in my title for this post... I think this started since I was the last update that was 'Display-NVidia-NVIDIA GeForce 9600 M GS' which was released on September 2, 2010... the update came from Microsoft updates... I'm almost certain that it is the source of the problem... I tried the display settings in the setting of the power of the Panel and went to the high preformance setting it and also to advance settings and then display and turned on Adaptive display and also the display settings set to 50% to see if he would do anything, but still no change... I hope I described it enough for you all.

  I could not uninstall the NVIDIA Microsoft's update, I'm so returned to the pilot back and who sets them all have works.

• I accidentally pressed the f10 or f11 key and the address bar and the taskbar, that both missing. I can't get back them. Any suggestions?

  Using Windows xp.

  Sounds that you have enabled full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  If you are in full screen view then hover over with the mouse to the top of the screen to facilitate the bar appear Navigation and tab bar.
  Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key.

• T440p BIOS - cannot use up/down arrow keys [broken?]

  I think that there is a problem with the current BIOS of T440p that I can not change the menu with the arrow/down buttons items. Up and Down keys work well in Windows 10. Difficulty please!

    Package  (ID)     UEFI BIOS  (BIOS ID)  ECP  (ECP ID)       issue Date of  Rev.
  
    ----------------  --------------------  ----------------    ----  ----------
  
    2.36  (GLUJ27US)  2.36  (GLET82WW)      1.12 (GLHT29WW)     01    25/02/2016

  OK, I just realized that I have a defective touch of DIRECTION DOWN. That explains it. GRRRR

• so many questions: no sound, cannot use USB and dongle...

  I have a toshiba satellite l505d-gs6000... I have installed the latest updates for my computer stop for the night he opened in the morning and I have no sound, unable to use USB and dongle... I restored an hour earlier and who fixed it, I have re installed windows os and it does not solve it... the drivers on my sound it's updated but also when I click on its screen it says: no audio output device is installed:

  Hello Jason, I've done a little reading on your laptop model, it seems, there is a hardware problem with this range of laptop, which causes the USB and sound to fail. There is no known for this hotfix.

  Check out this thread of Toshiba... http://forums.Toshiba.com/T5/audio-sound/no-sound-USB-on-satellite-L505D-gs6000/TD-p/172564/page/8 
  You will need to contact Toshiba customer service if your laptop is under warranty.
  Find a Toshiba Service Center

• Portege R930: cannot use the keys FN under Win XP

  Hye

  I'm French. I'm sorry, but my English is not good. I'll try to explain my problem

  Yesterday, my boss gave me a new computer. It's a PT330E Portege R930-1FE with windows XP, 7 has been uninstalled

  I can't turn off my touchpad. I can't use the Fn key.

  I called technical support and after I downloaded the drivers for seven 32-bit and 64-bit... But I still have my problem

  Please, you have a solution.

  Thank you

  Hello

  Fn keys are controlled by special tools of Toshiba and depends on the running system.

  Using Win XP, you need to install the common Modules and this must be done first. The common modules is an essential component of Windows systems.
  He will perform the other original programming from TOSHIBA to work properly.

  Check this box:
  [Common Module Win XP v6.07.03 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct 7565 = & selSh ortMod = null & language = 13 & selOS = 10 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 1 & ID = 83752 & OSI D = 10 & driverLanguage = 42]

  To get the other buttons FN working (ie the screen switching output), you must install hotkey utilities for display devices
  [Utility Hotkey for display v1.0.2.5 for Win XP | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct 7565 = & selSh ortMod = null & language = 13 & selOS = 10 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 83758 & OSI D = 10 & driverLanguage = 42]

  In order to disable the touchpad, you need to install Touch Pad on / off Utility
  [Touch Pad on / off Utility for Win XP v2.5.5.1 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct 7565 = & selSh ortMod = null & language = 13 & selOS = 10 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 3 & ID = 83770 & OSI D = 10 & driverLanguage = 42]

  I recommend you to check the page of the Toshiba UE driver and install all the available drivers for Win XP.

• Cannot retrieve the Portege R100 by using the recovery CD

  I replaced the HARD drive on my R100 not having the original. Thank you to help on the forum, I managed to solve a CDROM with a PCMCIA connector.

  I got through the recovery screen and choose option 1 - retrieve the entire disk. He got a disc of part way through 1 when he did not play a file. I then ran it again, but the selected option 2 - Toshiba Recovery utility and it started and then failed with the error - "cannot open TOSH_REC. COMMITTED AN ERROR."

  Where else?

  Thank you

  Ian

  Hello

  Have you replaced it with all new HARD drive? It's very strange question and if the HARD drive is nine something like that shouldn't happen. You have the FDD to check the HDD with FDISC? Please use the floppy drive and boot the disk to check the new HARD drive.

  Somehow, I feel that there is something wrong with this new HARD drive.

• HP ENVY 15 Notebook PC: HP Envy 15 action keys works do not (F9, F10 and F11)

  My laptop has been working fine since purchase, but last week, I noticed that action F10 F10 & F9 keys (jump, play/pause, skip) did not work for their function. Before last week I could just press the key to activate, I read other posts of this forum and the answers did not work pressing fn + alt + (key action), either by pressing fn + key action. To make this work I need to access the bios screen and change the default values, but it only works when the laptop is on. If I turn the laptop, turn again he resorts right back to does not. Action all other keys work e.g. keyboard backlight, volume, brightness, etc.

  Any solutions would be welcome.

  Thank you.

  Product name: HP ENVY 15 Notebook PC
  Product number: J2E80EA #ABU

  Laptop: HP ENVY 15-j151sa

  Hello @Spudy96,

  Thank you for your quick response!

  You can try to perform a System Restore.  If this does not work, then you could also try to install the previous version of the BIOS of your Support Site.  Let me know how it goes.

  Good luck!

• my computer was repaired BY the best, now cannot use the original product key. now my computer ask fo a new product key and I do NOT HAVE a

  I had my computer repaired once it crashed, now I am unable to use the original product code, my computer keeps asking for a real. the hat of t one that I use came with the original box and says it is locked. I use the card that comes with the two CD

  If you go back to Best Buy and ask to do a good job on your computer. You have already paid for your computer fixed, and Best Buy do not have it you returned in a usable state.

• Portege R700: Cannot use the two SVGA HDMI on the Port PA3838E-1PRP Port Replicator

  Dear all,

  I have a Portege R700 series (PT311E) and a high speed P/N PA3838E-1PRP port replicator.

  Today, I tried to connect two external monitors on the VGA port and the second HDMI port replicator port.
  Unfortunately, I was not able to configure the laptop / duplicator to * work with external monitors stand *.

  Do not work in this way portable stand and port replicator becomes useless.
  Although it is a default installation on other products manufactured without drivers and special parameters will be needed, I hope that in our case a key combination or a driver may resolve this problem.

  To be even more precise, I don't want to also use the laptop screen. I want to just connect laptop closed and turned off in the duplicator, to turn on the laptop the power button of the port replicator and to have the image on two external monitors.

  Thank you for your quick responses,

  Best regards

  Cristian

  Hello

  What R700-xxx you have exactly?

  How to connect two monitors? Are the two monitors connected only to the Port Replicator or is one of the monitor connected to the laptop and the other monitor is connected to the duplicator?

  Could you please post this?

  I'm not quite sure of HDMI and Port Replicator (PA3838E-1PRP) but many laptops equipped with support DVI dual video output (VGA and DVI) port using Advanced Port Replicator III (PA3314E-1PRP) or Advanced Port Replicator III more (PA3474E-1PRP).
  But this is only possible if the laptop itself supports the simultaneous use of RGB & DVI too.

• Return to win 10 to Win 7 - cannot use the special function keys

  Hello!
  I updated to windows 10 two weeks ago and since then I had to restore to factory settings.
  I didn't know that it would remove Toshiba programs, but there.
  I cannot now use special function keys but I want them back.
  What makes Toshiba program and what other programs Toshiba should I re - install.
  Thank you.

  I'm not back to win 10 to Win 7. I win 10 and I want to download the programs I lost BUT...
  PSKC8A-09V00S: part number you entered is not a device recognized supporting the upgrade to Windows 10. Please double check your part number and re-enter.
  ..... How to do that when I get this message? Is this to say that I'm stuck with Win10 on a Toshiba laptop without programs Toshiba? And if my device does not support windows 10, why I sent the upgrade, and why Win10 seems to work very well on my device? Can someone answer this?

• Save records using F10 and after pressing F10, it displays another form?

  Hi all
  is it possible to save documents by pressing the f10 key and after validation, it displays another form? If yes then help me
  
  Sarah

  Hello

  In the trigger KEY of VALIDATION of the form, write the code,

       COMMIT;
       NEW_FORM(''); -- Or any other form opening built-ins like OPEN_FORM, CALL_FORM etc.
  

  Kind regards

  Manu.

  If this answer is useful or appropriate, please mark. Thank you.

• Portege M400 - cannot use full 4 GB of RAM

  I installed two modules of KTT667D2 / 2G on my laptop (Portege M400-103, part No. PPM40E - 012018 G 3) - total do 4 GB. However, the two original Windows XP Tablet and Ubuntu 9.04 are unable to see all 4 GB - they see 3.2 GB only.
  The BIOS displays the amount properly - 4096 Mb.
  I also tried to solve the problem of updating the BIOS to the latest version (3.80, 30/05/08), but two operating systems (Windows and Ubuntu) see still 3.2 GB only.
  Any ideas? Thank you.

  Post edited by: Greendrake

  > However, as well original Windows XP Tablet and Ubuntu 9.04 are unable to see all 4 GB - they see 3.2 GB only.
  That s nothing unusual!
  That s a limitation of 32-bit. All operating systems 32-bit (no matter if it is Vista, XP or Linux) can manage 3.2 GB max.
  Only a 64-bit OS might be able to use and recognize more than 3.2 GB of RAM

  You should read a few articles about 32 bit OS and 4 GB RAM problem.

  See you soon

• Portege M700: Cannot use the fingerprint reader after update for Firefox 3

  Hey

  I have a Toshiba Portege M700 Tablet and with the truesuite software on a fingerprint reader and password Bank plugin.

  It's all working fine and dandy with firefox 2.
  Then last night I went and updated for firefox 3 and now I can't log in to Web sites with the fingerprint reader.

  No error messages, nothing. I can say that the truesuite or Bank password software is not detecting firefox 3. I've updated to the latest version that I could find, 2.0.2.0.

  I found this thread by telling me the process of update of firefox it breaks and I should completely uninstall and reinstall firefox, which I did.
  That didn't fix it.

  Then I completely uninstalled and reinstalled truesuite. That did not help either.
  Its still broken.

  Anyone know a workaround or a way to fix this, or should I wait and see if there is an updated version of the password database? (I find it unlikely because this isn't really a standard program)

  Hello

  I think that the new Firefox version is not fully tested and possibly it s not completely compatible with the 3rd party applications.
  I remember the same problems with older versions of firefox. Finally, it has been resolved.

  But why you don t use internet explore? As far as I know the fingerprint works without a problem

  In any case if you want to continue to use the browser firefox 3 so I think that the only solution is to wait for an update.

  Concerning