Portege R700-1DH - limited using Win 8.1 WiFi connectivity

Similar Questions

• BlackBerry smartphone Bold 9780 cannot use BB browser when wifi connected

  I recently started using a new BB Bold 9780 (BB6).

  It of a beautiful phone... and navigates very well with GPRS / 3G.

  However, if I turn on wifi, (connected to my home wireless router) the browser does not at all.

  "Cannot find the requested server.

  I have a Netgear router and it is very good for other devices.

  BB 9780 wifi session is set to WPA

  I have a dataplan with Virgin.

  I conclude that the wifi does not work and it would be very disappointing... and sounds weird!

  When all sales representatives say that he is an active wifi device.

  Does anyone have any tips or tricks?

  I was wondering if Opera 5.1 might help - but the opera died when I tried to launch it!

  Thank you very much

  Chrism

  Well, I finally fixed it.

  My BB was not able to connect to my Netgear router, but it could connect with happiness with the wifi of my neighbor.

  I turned off the WMM security setting on my Netgear router advanced setting Panel.

  Bing, the BB is now wifi.

  Result.

• Portege R700-1CZ - cannot use the latest driver of fingerprints

  My fingerprints camera worked fine until I updated the drivers yesterday to the latest version.

  I mainly use it to login in and encryption of files, but now I n t get this option. I uninstalled and installed again, tried reinstalling the software but nothing. When I go into control panel > biometric devices > use your fingerprint with Windows, I get the message that there is no app management installed. But when I check in the programs installed, I see "Authec Tec Winbio FingerPrint Soft" installed.

  Any help?

  Hello

  On the page of the Toshiba UE driver you can find the fingerprint software which works correctly.
  First, I recommend you to uninstall the software to print digital also you can uninstall the driver in Device Manager too.
  Restart the unit, clean the system and registry run CCLeaner (freeware tool. If you have not installed it in the past, do so before installing the software of fingerprint).

  Then install the software of fingerprint to the driver page.
  Restart again, run the test.

• Portege R700 - Autocad 2011 does not recognize the graphics card

  Hello

  I have toshiba Portege R700 with 64-bit win 7 installed.
  I need the computer for use with autocad 2011.

  For some reason any auocad does not recognize the graphics card installed on the computer.
  I suspect it because very little memory is allocated for the graphics card.

  How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

  Thank you very much!

  Hello

  What Portege R700-xxx you have exactly?
  As far as I know the graphics memory cannot be assigned manually.
  Everything is controlled by the graphics driver and you have no influence on this

  You can try updating the graphics card driver maybe it would help.
  The most recent driver found on the page of the European driver Toshiba
  If not, you should check the manufacturer of the graphics chip driver

  Good luck

• wifi connectivity limited after that windows 8.1 update on Z580

  I'm on my phone that I type this because I don't have internet access on my ideapad (again)
  I updated my drivers Lenovo has kindly put on their download site for (downloaded via my smartphone) 8.1 Windows Update but I still have the same problem. I've scoured the web for solutions, I made cmd, uninstall the drivers in safe mode... nothing works!

  Does anyone else have this problem? Would really appreciate a solution if you have

  Thank you

  Jacob

  I fixed mine! What a relief.

  I have Lenovo G580, who has the Broadcom 802.11n network adapter.

  At the point where I had problems (do not already know) Windows has been configured to use the Microsoft driver for this device.

  Following the advice to look at older drivers, I have found a Broadcom provided on my computer and updated driver to use. Immediately, a WiFi connected, and all seems well.

  Here are the instructions:

  # Open the Device Manager (search Windows help if you don't know what it is)

  # Select "Network adapters", and open (double-click) Broadcom 802.11n network adapter

  Pilot # go to the tab and click the update driver... button

  # Select 'Browse my computer for driver software ".

  # Select 'Let Me pick from a list of drivers for devices on my computer.

  # Select the entry "Broadcom 802.11n network adapter (Broadcom)" from the list and click Next

  Well, it worked for me.

  Good luck, Matt

• Portege R700 - BIOS-update 2.20 - WIN does not work

  I have a Portege R700-172-PT311E-03201KGR
  It's a WIN 7 64 bit Machine.

  Current BIOS 1.70
  EC-current Version: 1.40

  For this machine, an update of the BIOS and IT's there.
  So I downloaded the "BIOS220_EC160.exe" update and tried to treat.

  The first message during the update process is: "it is necessary to update the BIOS and THIS.
  When I continue with "Run the update", I get the error message:
  "Error: preparation of updated failed.
  Given the image file is not compatible with this cimputer.

  There is no change in the material of the machine. The only problem I see is that we use McAfee Endpoint Encryption (V6.0.2.6) that could have some influence on the update of the BIOS.

  But I'm not sure.
  Does anyone have an ideas?

  Hello

  BIOS update is important to you?
  Do you have problems with the laptop?

  I have portable three-year-old BIOS was did not updated

  However, AFAIK the VAP (value added package) must be to get the updated BIOS updated. Also the firewalls and other security and antivirus preinstalled on the system software must be disabled before attempting to update the BIOS.

• Cannot use 8 GB in Portege R700

  Hello

  I had 2 x 2 GB PC3 10600 ram in my R700 (i3) running Windows 7 x 64.

  I have a few sticks of 4 GB of ram, I wanted to update my laptop 8 GB total.

  I put in the memory which consists of:
  1 x 4 GB PC3 12800
  1 x 4 GB PC3 10600

  The laptop comes on the screen where it says "Starting Windows" and looks like it freezes before windows animation.

  If I try to use 1 x 4 GB (two speeds) and 1 x 2 GB, then Windows starts fine, but there is a problem when I use both the 4 GB sticks.

  I tested the ram with Memtest and they pass the tests.

  If I put the bars of 4 GB of RAM in a R840 (Windows 8.1 Pro), it starts very well.
  If I put the bars of 4 GB of RAM in a R700 (i5 running Windows 8.1 Pro), this also starts very well.

  If I try to put in the sticks of 2 x 4 GB of ram in the R700 i3 and trying to install Windows 7 or Windows 8.1 then happens to the screen that says "Windows is loading files" and the progress bar ends but then the screen goes all white and the fan runs but nothing else happens.

  I have 8 GB of ram in the R700 i3, so I don't know that it supports. The BIOS detects it has 8 GB of ram when I inserted them and the BIOS is updated to the latest version which is 2.20 iirc.

  Anyone can shed light on the problem?

  Hi Borito

  If the specification states that your model of laptop can handle with 8 GB of RAM, that we should not discuss this topic.
  By RAM upgrade is important to use 100% compatible and two modules of identical RAM (same specifications).
  I tested it on my machine using too much standard and a cheap RAM and my machine was dead. With two modules of identical RAM, everything is OK.

  Can you please send the name of the exact model of your laptop Portege (R700-xxx) and I'll try to find the exact reference for 4 GB of RAM for this model of laptop.

• Portege R700: Cannot use the two SVGA HDMI on the Port PA3838E-1PRP Port Replicator

  Dear all,

  I have a Portege R700 series (PT311E) and a high speed P/N PA3838E-1PRP port replicator.

  Today, I tried to connect two external monitors on the VGA port and the second HDMI port replicator port.
  Unfortunately, I was not able to configure the laptop / duplicator to * work with external monitors stand *.

  Do not work in this way portable stand and port replicator becomes useless.
  Although it is a default installation on other products manufactured without drivers and special parameters will be needed, I hope that in our case a key combination or a driver may resolve this problem.

  To be even more precise, I don't want to also use the laptop screen. I want to just connect laptop closed and turned off in the duplicator, to turn on the laptop the power button of the port replicator and to have the image on two external monitors.

  Thank you for your quick responses,

  Best regards

  Cristian

  Hello

  What R700-xxx you have exactly?

  How to connect two monitors? Are the two monitors connected only to the Port Replicator or is one of the monitor connected to the laptop and the other monitor is connected to the duplicator?

  Could you please post this?

  I'm not quite sure of HDMI and Port Replicator (PA3838E-1PRP) but many laptops equipped with support DVI dual video output (VGA and DVI) port using Advanced Port Replicator III (PA3314E-1PRP) or Advanced Port Replicator III more (PA3474E-1PRP).
  But this is only possible if the laptop itself supports the simultaneous use of RGB & DVI too.

• Portege R700 internal to screen very dark but can use the external monitor

  Hi guys,.

  just had a question about my Toshiba Portege R700 as the screen went white and I couldn't see the screen or sometimes I could and it was very dark!

  However, the laptop could start up as normal and I could use it normally through an external display!

  Subsequently, I replaced the screen and it started working again (happy days)!
  However, a few weeks down the line the same problem again apparently did screen dies.

  I take off again and disconnect and reconnect the screen just to see if that would solve the problem and he did, back and working again. I even tried the old screen I swapped and that works too!
  So I paid £140 + for a new screen that I didn't need, my question is what is the problem?

  Could not find anything else on this topic so would appreciate any help thanks

  Ross

  Hello

  It is difficult to say what might be wrong here usually black screen can be related to a faulty FL inverter.
  But laptop computer s display supports a backlight Led FL inverter should not be a problem here
  Maybe some loose contacts caused this

• Portege R700 and Win 7 Update detects not SP1

  Hello

  I have a Portege R700-1E8 with Win7 Pro.
  WinUpdate detects no SP1, but it has detected the other updates and installed their (the SO is enabled).

  If I install SP1 manually (downloaded as iso from Microsoft Download site file) it seems to be installed without problems.
  Yet, I picked up the phone to the original state and tried to detect the windows updates again.

  There are many upgrades available, but without SP1 AND IE9.

  Any ideea?
  Thank you

  Costin

  Hello

  > If I install SP1 manually (downloaded as iso from Microsoft Download site file) it seems to be installed without problems.

  So where is the problem if you were able to install SP1 manually?
  I had also some problems to install the patches in the past, that I could not install patches after system reboot and disable a 3rd party firewall, I could install necessary updates who received automatically by Windows 7.

  However, SP1 can be installed manually and it should be possible to install other patches automatically, so in this case, I wouldn't be worried

• Portege R700 - 3G wirless internet 'off '.

  I travel a lot with my R700 laptop and use the high device mobile broadband 3G almost everyday of the week.

  However, the mobile broadband has suddenly stopped working, and the Wireless Manager application reports that it is turned off. (It is not!)
  I also note that the blue light that indicates a signal mobile broadband is no longer present.

  I tried all the usual stuff such as a reboot, the wireless switching on and off the power, etc.
  I also checked in the Device Manager, where it is reported as an Ericson FG3607gw adapter and is supposed to work correctly.

  Someone at - he of the clues as to what went wrong?
  I think that it may just have failed due to old age. (The laptop is five years).

  Wide device is available as a spare mobile bandwidth, and it is easy to change.

  (I use Windows 8 x 64 and installed the latest driver Ericson there are a few butterflies.) The BIOS is also updated.)

  However, the mobile broadband has suddenly stopped working, and the Wireless Manager application reports that it is turned off. (It is not!)
  I also note that the blue light that indicates a signal mobile broadband is no longer present.

  If the led does not 'blue' light the 3G module is not IT.
  It would be interesting to know why you are sure that the 3G module has been activated 100%.

  I also checked in the Device Manager, where it is reported as an Ericson FG3607gw adapter and is supposed to work correctly.

  In Device Manager, you will see the devices that are recognized by the system... but this does not mean that the module feature (i.e. WiFi or 3G) is activated...

  However, I think that you should first try to reinstall the drivers.
  First uninstall the driver 3G since the Device Manager...

  There is also a control utility power of RF G 3 for Win 7. The '3 G RF Power Control Utility' active your 3G to start... this software is not available for Win 8 / Win 8.1 but check if you could install the version releaed for Win 7.

  In any case, a newer driver of Ericson G 3 was released for Portege R930 series.
  Check if you get the 3G enabled using this new version of the driver.

• Portege R700 - problem with fingerprints to connect on Win7

  I have problems with my new Portege R700 with fingerprint reader to log on Win 7 acount.

  I have digital fingerprints installation to the system via the Toshiba fingerprint utility. Several times I can wake up the Portege of sleep or turn it on, fingerprints from the BIOS is accepted, after which appears logon screen in Win7 and in some cases, I'm able to connect automatically to this account. In some cases just system is pending, it is not possible to login with the password. I restart phone, sometimes more than once.

  You can help someone? I have already several times removed, Setup still traces of fingers, I updated the utility and the new driver fingerprint - nothing does not.

  Hello Vava

  Are you using the original recovery image Toshiba (operating system) that you got with your laptop?

• Portege R700 + dynadock U - huge problem with video delay

  Hi all!

  First of all sorry for my bad English.
  I bought a laptop Toshiba Portege R700 with Dynadock U. Everything is going well except the video. Image on the external monitor connected to the Port Replicator is very slow, even when I work on the empty desk.
  I have a lag huge picture windows animations are real slow, the mouse jumps, do not commonly.
  On the toshiba operating system is Win 7 x 64. I installed the latest drivers from the support page.
  Please answer.
  Thanks and regards.

  Hello

  What Dynadock are you using exactly? U10?
  Please check this page > http://www.displaylink.com/support/downloads.php
  You can find the latest version of the driver Dynadock.

  What version do you use?

• Portege R700 webcam goes dark in low light conditions

  Hello

  Since I bought my Toshiba Portege R700 about a year ago I had problems with my webcam. I looked in several forums but couldn't find an answer. My build in webcam has problems of adaptation in the light of the room.

  When the room is dimly lit camera turns almost black after a few seconds. It is interesting enough before the camera darkens, he manages to produce a picture is ok for a few seconds, which means that the camera is capable of producing an image ok in low light conditions.

  She has just problems adjusting the brightness in the room when it is poorly lit. I propose to toshiba update the software of the camera, since it is clearly a matter of software. And yes I've tried every single possible configuration for the camera! And Yes, I also reinstalled (several times) the camera driver.

  I know that the camera performs well in places that have good lighting and so I'm only interested in improving my performance of cameras when not much light is available.

  Thank you very much
  Clem

  Hi dude

  I understand that you would expect webcam great performance in poor light environment but I put t do you think it would be possible to get the good quality photo using the laptop is dark rooms.

  The material of these small internal cams is limited and you see the same issues with other devices like smartphones cameras that resemble the internal cams s notebook.

  In addition, the webcam software that is preinstalled on my laptop Toshiba supports the night mode option that allows you to improve the quality of the obscure image in the Middle but of course you will not get the same image quality if you want to use the cam in the luminous environment

• Portege R700 - cannot activate the top modem mobile broadband

  Hi all!
  I have a big problem with my Portege R700 with Broadband Modem built-in.

  I installed the laptop with the Original CD recovery with Win 7-64 bit - all works well but if I press FN - F8 I only activated wireless and Bluetooth but noch Mobile Internet Modem Mobile Broadband is not displayed in the hardware Manager.

  Where the new driver for FN Options?
  How is the correct name of this option?

  I tried to install all the drivers I found here: https://aps.toshiba-tro.de/wlan/?page=3gdownloads

  None of them worked! I did a clean install, once again - no modem, indicated in the hardware Manager.
  He worked perfectly but after the installation of the new 2 weeks no chance.

  * Issues: *.
  *.) don't see a modem mobile broadband in hardwaremanger *.
  *.) FN F8 show no option to activate the modem

  Help me please - it is an urgent problem because I need this laptop for businesses. :(
  KR
  Philipp

  > do not see the modem mobile broadband in the hardware Manager

  The question is: did you buy a Portege R700 with a module 3G?

  I m asking because different Portege R700 were released with different specifications.