Portege T230 has no option to boot from USB portable CD room?

Similar Questions

• Iconia Tab 8 W unable to boot from USB

  Hello

  I'd love to start my Iconia Tab 8 W of a USB, UEFI has the option to boot from USB or PXE so that I do not suspect that it supports that in one way or another.

  Currently I have no luck with a simple OTG drive, I am able to access it from the same created the boot of Windows media, but no chance to see the drive in the menu of the UEFI (even the start menu only sees the Windows boot loader).

  Anyone has any ideas, how to proceed? I don't see any dock available for the Tablet here, but if there are some I would be headed in the direction (even if it is part of another series of the device).

  Thank you

  In fact I find the question why the installation CD is not recognized.

  Apparentely UEFI AEP 64-bit systems, most, but here, on this tablet UEFI is 32 bits, which is quite rare. I start different bootloader (rEFInd) who works with IA32, and is now working on how to start the * bleep * core so I can install the system. If anyone has any ideas I'm open.

  I'll keep this open and update once that I make it work with a solution how to install Linux on this...

• Need to boot from USB device with my Portege 7020ct

  Hello!

  I need help!

  situation: me and my girlfriend go on a long trip on Tuesday. We have to work, so we bought a second hand portege 7020ct.
  However, there is no CD or diskette drive. Win98 is installed but no drivers for the modem. infrared can locate other computers, but is not able to connect.
  so the rare thing I have is a usb connector.

  I want to install win2000 or at least put some data on the hard drive.

  So I need to use my external cd drive or usb key. the problem is, the system (usb port) find the external hard drive and the USB, but I need to install drivers to prepare! But how? --> no internet, no floppy drive, no internal cd, without infra-red...

  What can I do?

  I tried to get into the bios to see if it is possible to boot from the usb slot, maybe get the external drive runnin and then install win2000.
  but I can´t know how to get into the bios! .. .but I m don't know if it will work.

  How do I enter the bios?
  Anyone have any idea what I can do? How can I get drivers in the system?
  How can I get the disc runnin external or USB?

  Please, I beg you! I need help very quick, cause tomorrow is my last day...

  Thanks to everyone in advance
  Deko

  Hi Deko,

  The key in the power up takes you to the BIOS settings.

  Installing the drivers could be difficult. I have a 7010CT and there is no option to boot from USB (only floppy - HDD - CD - lan). I don't think that Windows 98 supports USB sticks without additional drivers. I upgraded from Windows 98 to Windows 2000 by using a PCMCIA cdrom external and from the installer of Windows 98. Maybe you could try to use a network card PCMCIA to try to find a disk for the Portege.

• Can't boot from usb, lack of boot USB for dv7-4173us option?

  I couldn't find an option to boot from USB on my

  HP Pavilion dv7-4173us laptop BIOS.

  How to enable boot from the USB port?

  Thank you.

  Hey hpng,

  I am pleased to hear that the option is now available. When you set up a dual boot with Linux, I have very little information on how to do it. The only thing I would say, is to read the document "frequently asked Questions (FAQ) on Linux". It has a lot of frequently asked questions, but the main reason is, to the bottom of the page you will see an option to where I can find more information about Linux.

  Depending on what version of Linux you want to install, I suggest you post your question on the Linux community.

  I hope this helps!

• Satellite A30 series can boot from USB external HDD?

  Hello

  I have a satellite a30 series laptop. Anyone know if I can boot from usb hard drive? My bios has an option to boot from removable devices. I want to install linux but my laptop has only 30 GB of internal space and most of that is out of stock, that's why I want to install and run linux from a disk usb external hard.

  Thank you

  As far as I know that something like this is not possible. To see if anyone has any other theories. ;)

• Satellite A25-S279 - Cant Boot From USB Drive

  Hello everyone. I'm new here.

  Is there anyway that I can boot from a hard disk on the A25 USB? In any case to update the BIOS to give me the option to boot from USB hard drive?

  I already went through the BIOS and used the HWsetup nothing helps.

  I want to run Linux on a mini-usb HDD, I just picked up, but I can't seem to boot from the USB connection.

  Please let me know.

  Hello

  You on the right, the BIOS supports a boot from the USB FDD.
  BUT it is not possible to boot from the USB HARD drive or USB key

  The BIOS offers these startup options:
  HDD, CD/DVD, LAN or USB FDD

• Booting from USB or USB-Flash on Qosmio G30?

  I would like to boot from a USB key with a PE Builder built the Image on my USB key. Is this possible? I can't find an option to boot from USB Stick. Drive HARD to the CD, LAN, only.

  I prefer this option to browse without risk of viruses, worms, adware...

  Please help me.

  Unfortunately, don t BIOS supports booting from the USB key or USB.
  You can boot from USB FDD, 1st/2nd HDD, ODD, or Network (LAN)

• EliteBook 840: unable to boot from usb flash

  Hello:

  I'm tempted to boot from USB drive to install a new version of Windows 7. When I press F9, I have only two startup options:

  -Computer portable hard drive

  -Computer laptop Ethernet

  The USB boot option do not appear.

  My BIOS Version is: 01.04 worm. M71 (24/02/2015)

  Note: I tested my USB key installation in the other laptop and it works very well.

  Thank you for your support.

  cherrera51 wrote:
  

  Yes, I know Rufus. How I said, I tried my USB in another laptop (a HP ENVY m4 laptop) and work very well. The difference is that the HP ENVY gave me the option to boot from USB and the EliteBook does not.

  I realized that, since the post, you did.

  I suggested RUFUS and EFI create setup of windows due to the startup problem, that you have with the Elitebook 840.

  It may be just what you need for this particular laptop.

  If you want this to work, then you must be flexible and willing to solve the problems.

• Boot from USB device on Inspiron 5520

  Hey guys,.

  I got a new Inspiron 15R 5520. The problem is that I can't start the laptop from a USB key like I did on N5040 (my 2 year old laptop), and there is no option to do this. First of all, I hit "F2" to enter the BIOS Setup page, there are only 3 options under the boot device: hard drive, CD/DVD, network. I restart the computer and press "F12" to select the boot device, still no USB.

  Dell freeze function to boot from USB device? Is there a solution? Thanks in advance.

  Hi SimonJia,

  This system is designed so that it doesn't have an option to boot from USB.

  Just reply to other questions.

• How can I boot from USB - Portege A200

  Hello

  I have a Portege A200 which is only a couple of years, but the hard drive no longer works. Initially, I thought that this was due to corrupt the boot disk record, but after trying to replace the drive hard (with two different readers), is showing a #0 IDE error when starting. So I came to the conclusion that the IDE controller chip is dead.

  In order to get labour latop, I burned a cd with the ubunto ISO. It starts off ok but due have only 512 MB of RAM, the system is somewhat limited and nothing installed is lost each time that I reboot.

  Now, I bought a 2 GB flash drive and installed ubuntu on it. My other problem is that there seems to be no boot from USB HDD or USB option in the bios.

  The options I can think of are:
  (1) Upgade the bios so that it supports the start of memory stick (although no HARD drive so do not know how I could reflash the BIOS or if there is even an upgrade of the BIOS that would support this feature)
  (2) create a cd that starts the boot process then tells the system to continue the initialization of the USB key (this is possible and does anyone know where I might be able to get these software)
  (3) boot from CD but the use of USB to keep any recorded information / everything installs etc (I suppose that similar to option 2 except the cd would manage the entire OS and USB would just "extra" information)

  If there are other options if someone may think I am happy to give them a go. Seems a shame to have to chuck to a laptop that is not particularly old, because the IDE controller chip has failed on the mobo.

  I have apppriciate any help anyone can offer.
  Thank you very much
  Mark

  Hello

  First I have to say that it of not possible to boot from the external USB device as USB, CD/DVD USB drive or USB HDD.
  It of only possible to boot from the external USB FDD (floppy) disk

  However, no opportunities for startup are clear, but I think that you misunderstood the IDE #0 error message. According to m that the IDE controller is not defective but only the new drive HARD is not compatible and not recognized by the BIOS.

  There are different reasons for this problem
  For the most part this error message appears if the HARD drive master/slave/c-salt settings are not correct.
  Generally these settings don t need to be changed or switched on the 2.5 hard disks but some hard drives support a rider that needs to be fixed in the correct position. But I put t if your HARD drive supports this

  In addition, the size of HARD drive isn't is not compatible could be the reason for these error messages!
  I would recommend so finally communicating with ASP in your country to get a new, compatible HARD drive and see if the same error still occurs.

  Good luck

• Is Portege 244 OCT - possible to boot from a CD external-ROOM

  Hello

  I just have an old Toshiba Portege 344 portable OCT with a 6 GB HD and a processor intel Pentium III 500 MHz processor and 128 MB of RAM. For the moment I got it under Windows XP Home Edition. I would like to go back to Windows 98SE, but the computer does not have a floppy drive or a CD-ROM internal. It has a usb port, however. I'm trying to start the windows 98 cd from a cdrom drive external usb (EZ - DUB), but it does not work. I don't seem to find an option to boot from a USB device no more. My bios is June 27, 2001.

  Is there something I can do in order to manage to start my computer from my EZ - BUB? and how can I update my bios to the v1.6 without the floppy drive?

  Thank you

  grdoming

  I forgot to ADD. An external USB floppy drive would do the trick?
  Thanks again,

• Portege R500-12 s - problem of recovery (Boot from USB)

  Hello

  I tried several days reinstall this laptop (Toshiba PORTÉGÉ R500-12 s). I reinstall drive, but it has no CD-ROM included, so I'm fighting with booting from the USB port, with my external hard drive. Those that the BIOS loads even boot from USB? Because there is no alternative USB inside the boot priority. I noticed that I can choose from, what I think is alternative of different startup in start up, when I press the F12 key. When I press the F12 key and choose USB, I just pup up to a similar cmd command line.

  Reinstall is the only option because my laptop is super slow, and I have no restore file (CD) on my laptop

  Ultimately is it possible to reinstall windows via USB boot, or do I have to buy an external CD-ROM drive? Which is the last thing I want to do. Advice or assistance on how I'm going to do this?

  Thanks in advance :-)

  I put t know if this is possible, but if you can visit Toshiba service in your city, ask them for help. They have all the external devices and also external optical drive.
  Buy a coffee and ask if they can install just image recovery using your recovery DVDs. I m that they will help you with this.

  By the way: you can not install OS using the recovery saved on the HARD disk image. Laptop can't see it.
  What you need is the optical disk drive.
  Also, try to borrow a somewhere.

• All vmware products does boot from USB option in the bios?

  All vmware products does boot from USB option in the bios?

  Hello

  No it is not yet possible. I hope that this will change, but not at the moment.

  Best regards

  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
  "Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• Can't boot from USB on laptop Acer NC-V5-571. another boot enabled is bios and I tried option in W8

  Can't boot from USB on laptop Acer NC-V5-571. another boot enabled is bios, but and I tried to boot from usb DVD etc. (starting from things that works on other PCs. I've set USB and DVD as a priority higher from startup in the BIOS. I get the alternative start menu, choose DVD or USB, but it starts just Windows 8.

  I tried to boot from an external device in settings PC - general settings in the charming bar, but it starts off directly with Windows 8 too.  the DVD plays fine films, and if I plug the boot device dvd W8 sees them and their content because I expect too much.

  Any ideas on how to boot from another device.  I would like to take at least a decent backup using Acronis.

  Thanks in advance for any help

  Ted

  Boot from an additional media under Windows 8, you will ensure that you have either disabled Secure Boot or changed to UEFI in the traditional mode.  The following articles describe how to do this.

  Passing UEFI BIOS mode to legacy

  How to enable or disable secure boot

• Desktop HP ENVY 700: problems with the boot from usb in the bios

  Hi I'm trying to boot from usb on a desktop HP ENVY 700. I don't know the serial number now.

  I followed the instructions and have produced a bootable USB and I checked this on a work dell computer where there is an option for me to boot from my USB if I so wish, but on my HP ENVY any options choose it does not appear with my USB in question and when I try to change the boot sequence making sure the usb/floppy and drive hard usb is above the rest of the sequencers starting it always starts just to the top as usual to my windows boot 10. I've disabled secure boot and used the boot of the legacy and it still does not work.

  I went through all the options I can that seem to be logic and it just does not work. I don't understand and I have to start using a usb key that I use the operating system can be very dangerous in a real environment, so it can not be downloaded to the hard drive.

  I need immediate help, this becomes quite frustrating now that it should be simple to do, but HP is not the way to simplisitic to do.

  Please if someone could point me in the right direction I would be so appreciative ideally if I could have a ride on the way to do

  I need this to work because I can't afford to buy new systems and its for my studies so its imperative

  Your PC has a motherboard of Memphis and happens to have a UEFI BIOS and the hard drive of the GPT format.

  You can check the type of hard disk online order volume by using the DiskPart utility.

  

  Create a flashdrive bootable UEFI with RUFUS.

  https://Rufus.AKEO.IE/

  Plug it into an available usb port before you press the power button. Near the powr button and immediately start to tap the F9 key to enter the boot from the sources menu. Select the Flash drive under the UEFI Boot sources. Let the boot process. If you have created the key correctly, it should start.