Portege Z30 - A - 18 M - what is its display panel technology

Similar Questions

• Portege Z30 - Has is not awaken from its slumber

  One of our employees is using a Toshiba Portege Z30 - A connected to a DisplayLink Targus docking station. By default, our SOE configures power settings to do nothing when the lid closes. We have configured the laptop of this person to go to sleep when the lid closes if the notebook is on battery, and keep the default setting to do nothing if the lid closes when the supply network. About 6 weeks, the laptop has stopped waking up from his sleep.

  I don't know if the implementation of standby or try to wake up from its sleep occurred when it is connected to the sector or on battery only. What are some troubleshooting steps that we can take to help diagnose the problem? BTW, the key entry nothing on this forum site, using IE10/Windows7.

  The laptop does not wake up from sleep, open the lid or also by pressing the power button?

  What BIOS status?
  Is it already knows?

• What is the number of keyboard for Portege Z30-A-1E5 part?

  Hello
  I want the Toshiba Portege Z30 A 1E5, but is apparently available for purchase of the German and Austrian sellers with the QWERTZ keyboard. I would like to buy an and Exchange on the keyboard AZERTY or QWERTY (UK).

  However, I spoke with a company that and they can't confirm that they can get a part unless I can provide a reference number of keyboard (they also cannot give me a quote without it), but this number does not seem to be easy to get their hands on without actually having the computer and take off the keyboard and research under! I feel a little nervous about spending so much money when there's a chance that I won't be able to reverse the keyboard.

  So my question is, can someone tell me what the part number of the keyboard is for the a-z30-1e5 portege?

  Any help would be appreciated!

  Kate

  Hi, Kate

  I m wondering why you want to buy a Portege Z30-A-1E5 that isn't available in the United Kingdom?
  The notebooks are pre-installed with a Windows system in different languages. In the case of Portege Z30-A-1E5 available in Germany, the system language would be German.
  The keyboard also supports a different layout.

  Portege Z30-A-1E5 was equipped with a processor i7, SSD 512 GB and 16 GB of RAM disk.
  Very similar Portege laptop, Z30 - has - 1 6 was released in the United Kingdom. Its preinstalled with the Windows system in the English language and English keyboard layout.
  Of course, the hardware specs are a little bit lower (256 GB SSD drive and 8 GB of RAM) but I think that this could be improved is much easier to replace the keyboard.

  However, where you can buy the Portege Z30-A-1E5, I recommend contacting the maintainer authorized Toshiba in your country for replacement keyboard. Guys could control the keyboard of Toshiba law and could perform the replacement.

  Just a note: the replacement must be performed by service provider authorized because of the validity of the guarantee. The replacement must be performed by an approved engineer to keep the warranty valid.

• Portege Z30 - A - 18 M - noise fan

  Hello

  yesterday, I bought new Portege Z30 - A - 18 M and I'm a little disappointed with the noise of the fan.
  The fan is inactive only when I do not have anything with Notepad or when I read something to pdf or microsoft office. As soon as I run Google Chrome or Mozilla, the fan starts to cool in 48% of its operating speed (according to Toshiba pc health monitor) and does not stop until I have shut down the browser and the cpu is cooled to 36% of its maximum temperature.
  My question is, if it is normal for laptop as it begins to cool at all times when the only thing I do is internet browsing, and if there is no solution to this problem.

  Thank you

  Hello

  I don't have this model of laptop, but I can imagine that the cooling fan is active when certain applications are active.
  I do not know what eating plan you use, but, as you know, you can change the power management according to your activity. For each day's activities, you can use your laptop with the standby power management. It slows down the CPU but also cooling fan activity.
  Open power options advanced for each diet plan and check the parameters for the method of cooling. Put the battery optimized, and I hope that this will reduce the cooling fan activity.

  I use the same settings on my laptop satellite and cooling fan is very quiet.

• Portege z30-b-14z 10 Pro 64 bit will not be in hibernation

  Dear all,

  My new Portege z30-b-14z 10 Pro 64 bit will not be in hibernation.

  I can not hibernate through the following methods:
  1. click on 'Start', 'power', 'Hibernate '.
  2. press x and windows, click on 'Close or disconnect', click on 'standby '.
  3 a prompt as administrator and type "powercfg/h on" and then press ENTER to activate the Hibernate mode, then type "shutdown/h/t 0".

  Yet once, nothing works. I want to really just close the lid of my laptop and have hibernate.

  Well want to can someone help?

  See you soon,.
  Bender22

  Dear all,

  There has been no response. This is my 2nd Portege for work and I can't go to the Hibernate in Windows or Ubuntu. What gives? I have this job and must close and run meetings with out having to stop and shut down all my programs that I have running. I need this laptop to Hibernate.

  I also have a DynaBook (of Japan) and the R830 running current House to run Win 7 64 - bit professional. They cannot Hibernate or the other.

  Can anyone help, because Toshiba cannot.

  See you soon,.
  Bender22

• Portege Z30 Module problem - A - 13 L 3 G

  I had a problem with a new Portege Z30 - A - 13 L.

  Module 3 G / 4G do not work. As a first step, the Air software map Watcher on the first Installation of Windows 7 detects the sim card and showed a signal, but it Air card Watcher Software still not said no reception (in German: Kein receipt).

  I also put the right apn in the profile.
  I had this problem with 2 different operators sim cards.

  Cause I wanted to use Windows 8.1 anyway I installed it with the original recovery disks.
  The original Windows 8.1 don t comes with Air card Watcher, so you must do with the instruments of the Board of Directors of Windows 8. Windows 8.1, I had a same problem. It detects the SIM, but it says no network (in German: Kein Netz). I put t found the possibility of changing the apn in 8.1 of Windows until you have a mobile connection.

  Initially the Device Manager displays the Module of Sierra Wireless EM 7305 as a network card.
  Then, I uninstalled the driver of Sierra Wireless and installed the Toshiba page.

  After that the Sierra Wireless Module presents itself as a Com device in Device Manager. The cause so much of this networker of Sierra Wireless adapter isn t it, the mobile broadband connection don t even shows charms Windows 8.1 bar upward.

  After that I reinstalled again the image Windows 8.1 with the original recovery disks.
  I saw said that Sierra Wireless Driver has been installed, but the Module EM7305 of Sierra Wireless is presented with an exclamation mark in Device Manager.

  Then I uninstalled and installed the driver manually again.
  He appears again as com device in Device Manager.

  So I think that the module has been a hardware failure. What do you think?

  > After that I reinstalled again the image Windows 8.1 with the original recovery disks.
  > I saw said that Sierra Wireless Driver has been installed, but the Module EM7305 of Sierra Wireless is presented with an exclamation mark in Device Manager.

  On the page of the Toshiba UE driver, you can find and download the [Sierra Wireless Driver LTE 4 G driver | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 362 & selProduct = 17549 & STAS hortMod = null & language = 13 & selOS = 46 & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 2 & ID = 90092 & OS ID = 46 & driverLanguage = 42]
  This Wireless Broadband Mobile driver is used to transfer data at higher rates and greater capacity.
  Install it!

  Also 3G must be activated before you try to establish a 3 G connection.
  Please check if the 3G module has been activated correctly!

  Recommend checking this information page of Microsoft Mobile Broadband end-to-end
  http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

  You will find different troubleshooting tips.

  In the case where you have a signal but you can't connect the possible reasons could be:
  You don t have a valid data subscription.
  The name of the access point (APN), user name or password used for the connection is not valid.
  You're roaming and the selected network operator doesn't allow data services or you don t have roaming enabled for data services.

• Satellite vs Z30 Portege Z30

  From what I can tell (and confirmed to the Toshiba customer service) the Satellite Z30 is identical to the Portege Z30 except for the following differences:

  * The Portege Z30's Active Management Technology (AMT), which allows some administration remotely for enterprise environments
  * The Portege Z30 has a warranty of 3 years (1 year of the Satellite)
  * The Portege Z30 is pre-installed with Windows 7 and Windows 7 system restore partitions (and Windows media 8.1 provided) so that the Satellite comes pre-installed with Windows 8.1 system partitions and restore

  My question is if the roller on an image taken of installing Windows 7 from a Portege Z30 will transfer to Satellite Z30 machines? I suspect there will be no problems with the hardware, but I'm curious about Windows activation and if the SLP on Satellites key will match the Portege.

  Please be so kind and send feedback after your recovery image experience.

• Portege Z30 poster ipv4 and ipv6 - only pxe boot is

  Hi all

  Toshiba Portege Z30

  We do all our installs via PXE, when you press F12 I get now two network options where normally I would just get a.

  F12 gives the following options:

  HDD/SSD: SAMSUNG SSD SERIES
  LAN1: IPv6
  LAN2: IPv4

  When I select the option I get what follows read (IP addresses were not included, but are correctly pointing to the right servers):

  ------------------------------------------------------------------------
  > On IPv4 PXE boot.
  IP address of the station is *. ***. ***. ***
  IP address of the server is *. ***. ***. ***
  NBP filename is SMSBoot\x86\wdsnbp.com
  The NBP file size is 30832 bytes
  Download the NBP...

  Succeed to download the NBP file.

  Download the NBP...

  Succeed to download the NBP file.
  Press a key to continue...
  ------------------------------------------------------------------------

  I tried searching through the BIOS settings but can't find nothing obvious

  Can any advise if there is anything I can try to get this laptop to perform a PXE boot please

  Let me know if you need additional information

  Kind regards
  Steve

  Looks like your server isn't aware UEFI.
  Try changing the the CSM UEFI Boot Mode in the BIOS under the Advanced tab, under System Configuration. You may have to disable Secure Boot first.

• Portege Z30-A-181 - win 10 graphics driver need - not strong enough screen

  Hello

  I would ask you for help. I've had my laptop PORTEGE Z30-A-181 PT243E 08305SCZ last November. I'm upgrading my OS to W10 64 bit and get into trouble with the DISPLAY DRIVER. It is not official for this PC display driver
  also, it's a laptop of high qualitity. I use W8/W7 64 bit drivers.
  Most of my screens is not sharp and smooth.
  Could you let me know, what to do?
  I was told that the laptop is not on the list of supported laptops.
  http://www.Toshiba.EU/innovation/generic/Windows10/
  It's a laptop 900pounds, hope, therefore, it is only poorly understand.

  Thank you.
  Kind regards
  M.Bitman

  I have not yet installed Windows 10, but the z30 - a should be on the list: https://www.toshiba.eu/innovation/ge...ws10-business/ (link to business-products)

• Portege Z30 - A - PXE Media test failure, check cable of

  Hello everyone,
  Here's my problem: two days ago my Toshiba Portege Z30 - A turns off suddenly, and when it has reactivated the instead of displaying the usual Windows Home page at he showed a black screen with these lines written:

  'Intel(r) Boot Agent GE v1.5.43
  Copyright (C) Intel Corporation 1997-2013

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.
  Insert system disk in drive.
  Press any key when ready... »

  And every time I turn it on it displays this screen again.
  Why is it like that? What should I do?

  Thank you very much
  Stefano

  It seems that the system does not recognize your ssd more. Usually, the hard/SSD is the first bootdevice and whether it is empty or does not exist, it will jump to usb or networkboot. PXE = networkboot

  Try to start with a live-stick and the check if you can access your SSD. Also see, if the bios/efi does not recognize the drive.

  Worse: all your data is lost... (I hope you have a backup)
  the positive: this question must be covered by the guarantee! If you are still in the first year and registered for the guarantee of reliability, you get your laptop repaired and all your money. xD

• Portege Z30 - A - Ubuntu 14.04 - Sierra Wireless

  Hello

  Toshiba Portege Z30 - A
  PT241E-01D00QPL

  Windows 7 - there are interface "Sierra Wireless Mobile Broadband Network Adapter".

  Ubuntu 14.04 - there is nothing of :-(
  Only -.
  Bus 002 Device 003: ID 1199:9063 Sierra Wireless, Inc. sudo modprobe usbserial vendor = 0 x 1199 product = 0 x 9063

  What can I do?

  Perelka

  Hello

  There seems to be a bug in Ubuntu.
  See this bug report:

  https://bugs.Launchpad.NET/Ubuntu/+source/modemmanager/+bug/1326954

  Tom BR

• Portege Z30 - B - Toshiba picture after change for Linux installation

  Hello.

  I just bought Portege Z30 - b.

  I want to replace windows with linux (fedora I think), I did the windows image by using Recovery Media creator on USB.

  So if now I will install linux I delete all the files on the SSD.
  Maybe futture I want to reuse windows, can I return to original state by using this USB?

  If I install this linux, what happens with toshiba tools accessed through the BIOS/UEFI?

  Where can I get windows CDkey?

  Thanks for the help!

  BTW: great laptop!

  can I go back to original state using this USB?

  Yes, recovery would fix the laptop back to factory settings.

  If I install this Linux, what happens with Toshiba tools accessed through the BIOS/UEFI?

  I'm afraid that I'm not sure what you mean exactly with Toshiba tools accessed through the BIOS...

  Toshiba tools do not support Linux... you can install Linux but Toshiba software wouldn't. But you can still access the F2 BIOS support and turn the device

• Portege Z30 - A - Intel Rapid Storage do not work

  Hello

  Intel Quick pad do not work.
  I can enable it in the bios (4.00).
  Do you have someone has the same problem (I tried evrything: standby, hibernation, toshiba start of high-speed...)
  I think that I would not have flashed the bios to 4.00

  Where can I find the older BIOS version?

  Thank you

  My computer: Portege Z30 - A (PT241E)

  Where can I find the older BIOS version?

  Maybe this thread could be useful:
  https://Forum.Toshiba.EU/showthread.php?83449

  I can enable in the bios (4.00)

  .
  Sorry, but what do you mean exactly? This option is dimmed or is not available or what?

• How downgrade the BIOS on Portege Z30 - B?

  Hi all

  I updated the BIOS on my laptop Z30-B-119, and it is much worse than the original BIOS, so I want to downgrade it.
  There is no way to save the original BIOS during the update and the previous BIOS is not available on the site.

  Someone has the original BIOS and knows how to extract?

  Maybe someone knows how to contact Toshiba technical team directly? (Don't see what they have implemented in new BIOS, I have no hope they read on this forum or user opinions).

  If you're wondering why I want to downgrade and what's wrong with him, see below for an explanation.

  I was convinced that the new BIOS might resolve the problem with the fan, which works well too early, but it turned out they made much worse! The fan will now light at 42 °. Seized 50 °, which was already a Toshiba engineers stupid choice, provided that the side of the CPU temperature is 105 °, so that they could keep the laptop quiet at least until 60 °, especially as many people's complaint of the fan in this model. Instead, Toshiba has done the opposite and lowered the temperature even more.

  How foolish choice their engineers do, I will never buy another Toshiba and will not recommend anyone buy their products. But since I have already made the mistake one bought a Toshiba laptop, I hope that I will be able to downgrade the BIOS or contact them to request an update.

  Let me know if you know how to do it.

  Toshiba Portege Z30-B-119 PT253E - 01100XPL
  This European model belongs to the PT253E series

  The Portege Z3x - B PT253U (same model) was released in the United States and it supports the same BIOS

  The BIOS for the PT253U is compatible withE -PT253 and can be downloaded here:
  http://support.Toshiba.com/support/v...tentId=4007631

• Portege Z30-A-10w: Win 7 BSOD after upgrade SSD

  Hello

  I am wanting to upgrade a laptop Toshiba-Portege-z30-a-10w of company SSD 128 to 512 SSD
  However when loading windows 7, it crashes when connecting with a blue screen error 0x00000001

  The SSD 512 that I use is
  http://www.crucial.com/USA/en/storage-SSD-M550

  and according to the
  http://www.crucial.com/USA/en/compat...Tege-Z30-a-10W

  It is compatible with the Toshiba portege-z30-a-10w
  I've updated the BIOS of the laptop to V4 30/04/2015 (which to my knowledge is the most recent)
  http://www.Toshiba.co.UK/innovation/...jsp?service=UK
  Moreover I have updated the firmware on the SSD 512 to what, in my view, is the last
  MU02 version
  http://www.crucial.com/USA/en/support-SSD
  However I still get the same problem with Windows 7 to break with a blue screen just before the opening of the session.

  All ideas

  Thank you
  David

  I've never managed to install Windows 7... but I installed Windows 8 and goes on well...

  I have no why, but install Windows 8 seems to allow the 512 SSD to use

  Hope it will be useful.

  David