Power button and HDD cable

Similar Questions

• Power button and HDD cable - part 2

  Hello

  7 days ago, I posted the message below:

  Hello

   

  I made a big mistake by opening my HP Pavilion 15-n255sb (it is a generation sold here in Belgium) without knowing exactly how to go about this and so in the process I broke the cable to HARD drive and ripped from the flat cable end of the power button.

  Yes I know, guaranteed went out the window with this stupid, stupid, but I'm sure I can get the machine and it is back to work because it is a very nice to work with machine...

  So what I need is to know where to find these 2 cables, prefably here in Belgium or elsewhere in Europe, if everything fails for the rest of the world...

   

  Someone who can help me?

   

  I thank you very much and feel pretty stupid to spoil this machine , !

   

  Sparkles1 has been able to help me by pointing me on the manual for this laptop and if I could find the correct references.
  

  So far everything is fine, but as soon as I tried to order them, I ran into a wall (brick). HP themselves do not seem to be able or willing to provide them, their partners (preferred) are pretty useless too! If I go to HP USA I can find two pieces, put them in my shoppingcard but of course I'm back down to HP Europe (Belgium to be precise) and ther everything goes cold...

  Someone at - it suggestions how to get these 2 simple parts? It becomes very stupid and I'm angry...

  Thanks for your time and help,

  Eugene

  eBay, U.K.

  http://www.eBay.co.UK/ITM/732071-001-DD0U36HD000-genuine-HP-hard-drive-caddy-enclosure-TOUCHSMART-15-N-/291170771234?PT=LH_DefaultDomain_0&hash=item43cb216122

  http://www.eBay.co.UK/ITM/new-732076-001-HP-15-N211DX-power-button-Board-with-cable-/151293337453?PT=LH_DefaultDomain_0&hash=item2339c91f6d

  Not exactly a discount House, but these two will deliver for you.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• replacement for the power button cable / stop, power LED and HDD LED

  Need to find cables to replace the header 9 pin on the switch / stop, power led and HDD LED indicator.  It is a PC HP Pavilion Media Center m8530f.

  Additional details - no one A High School HE thought that the switch was bad on this PC, so they tried to replace it, but ended up damaging the cables.  The real problem was a power supply dead, so I ordered a new, but now I need to fix this as the person IT damaged the power button, power LED and HARD drive cables.

  Here is a link to your m8530f on HP Part Surfer. I think the part you want is "power switch cable assembly (Black Canyon), part number 5070-2940. It looks like it is available, but you can always call HP and ask.

  Frank

• HP pavilion g6 2305 tx: hp pavilion g6 2305tx button and ribbon cable

  my hp pavilion g6 2305 buttons power tx ribbon cable is defective buy cable original hp in bangladesh or power button cable pls let me know also the number of spare parts.

  Hi @shuvo2014,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your parts that need HP Pavilion laptop 2305tx g6. Here is a link to your manual page 62, which displays the part numbers and how. You need to look the part, 683549-001 POWER BUTTON BOARD WITH CABLE in your search engine and include your location. This will give you coins that are available in your area.

  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below!
  
  Thank you.

• What does the power button and closing of the lid

  When trying to choose what pressing the power button or closing the cover made my option is locked on the 'sleep', I can't choose anything else, is there something missing in windows or do I have to install something to make it work?

  You must disable the utility Samsung "Fast start".  It handles some of your power for you options [there is no problem with the neutralization of him because it doesn't do anything for you that you can't do it yourself].

  Note: a user said earlier that "Fast start" had been renamed, then you might need check the correct name in your manual or by research in Samsung records in all programs.

• After Windows Update, is now silent erratic speaker (flickers power button) and sometimes erratic behavior of the mouse

  I noticed a few days after the restart after an update of Windows (a few weeks of updates at the same time evidence) on my old laptop Dell M60 when I hit the mute button would begin just flashing power continuously, but there is ore that turned off.  I restarted and it has always given this behavior, so I turned off the laptop and decided to watch it later.  Today, I had a friend send me an email on their desktop PC indicating that they have the same problem.

  Does anyone else know this? Identified/fixed?

  Hello

  Download the latest sound/audio driver and if not more recent re - install the same. Please use the instruction manual
  as we explain.

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High Definition Audio

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  1. go to the system manufacturer's website and search for the driver the newest download - SAVE - will click with the button straight on and RUN AS ADMIN
  (This is your rescue.) REBOOT after each installation of driver.

  NOTE: Driver Sound often rollback so check the version after installation and reboot to see if the version you
  installed is there, if not repeat - restart until it is. It may take several tries depending on the recommitments how he
  the fact.

  Then do the same for the site of the manufacturer of the device.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Pointing device Touchpad with power button and precision multi touch gesture of support.

  Red led lights up just to the left of the touchpad. What turns on and off the touchpad?

  Hello

  Double clicking the top left of the touchpad will switch it power.

  Kind regards

  DP - K

• HP Pavilion dv6700 - cable power button ribbon and Ribbon of Touchpad?

  Hello.

  My computer laptop ribbon cables have been damaged.

  They exist in Greece specific ribbons cables?

  https://DL.dropboxusercontent.com/u/66127489/images/ribbon_cable_1.jpg

  https://DL.dropboxusercontent.com/u/66127489/images/ribbon_cable_2.jpg

  Hey @ps3bagg ,

  Welcome to the HP Forums!

  I understand that you are looking for a replacement cable for your of the power button and the touchpad.

  Usually the Ribbon is available only with the hardware, that's and not available on its own. However, a cable kit is available for your laptop but does not include the touchpad cable. It includes the Council of LED cable. Power button Board, USB/cable connector Board cable, Audio Board cable and cable of the Bluetooth module. The part number for this is 431437-001

  The touchpad is part of the top cover. Replacing the top cover also includes cable.

  For use only on computer models with Intel processors:

  • Equipped with fingerprint digital (including fingerprint digital and cable card) 446509-001
  • Not equipped with a fingerprint reader 446508-001 digital
  • Only with the Best Buy computer models equipped with fingerprint digital (including fingerprint digital and cable card) 452635-001
  • Only with the Best Buy models not equipped with a fingerprint reader 452634-001 digital

  For use only on computer models equipped with AMD processors:

  • In complete models with a fingerprint reader (includes the TouchPad, TouchPad cable, fingerprint card reader and fingerprint card reader cable) 449942-001
  • In featured models equipped with a fingerprint reader (includes the TouchPad, TouchPad cable, fingerprint card reader and fingerprint card reader cable) 451408-001
  • Only with the Best Buy computer models equipped with a fingerprint reader (includes cable, TouchPad and fingerprint reader card and cable) 458603-001

  You should be able to find these parts on the HP part Surfer Web site. I can't say with certainty if the delivery to your country is available. You should be able to find these parts easily on a website like Amazon or eBay.

  Hope this information helps!

• My laptop will not be closed unless I have press and hold the power button

  Computer laptop MU shut unless I press the power button. There is no closing

  Go to control panel-> Power Options control. Click on choose what the power button and the click of the left mouse.

  Look at the options. Select other options to test.

  Also, see the documentation that came with the computer or the web site of the manufacturer for other possible options.

  It is possible that the laptop tries to install updates and the process is blocked somehow.

  Tom Ferguson

• Two Macbook Pro, both does not start up, when I press the power button, I hear two disc bit Caryl, I see little light on the front on the displasy release button, black screen, no edge

  It was weird because I've NEVER had two computers have the same problem before. They are the model 2008 2.2 Ghz Core 2 Duo, 6 g of RAM, models of 128 GB of hard drive, the two Yosemite running, both had new hard drives, cables, batteries and RAM installed OWC (Apple approved reseller) and I use Macs for at least 20 years. In about a week, one just blacked out while sitting on my desk doing nothing, the other does the same on a week later. When I press the power button, I hear the drive hard hum twice, then all I get is the little light on the screen release button, that's all. Black screen. fails, nothing. I can press the power button and it will fit off the coast. Is it possible that some of them have infected somehow, or possibly send me the malware that has infected my system? I would not normally only, but for all of them to go down to one right after the other with the same problem just made me think, it must be the same cause, but what?  I had been in a war of fire recently with very ugly people, and I've never seen two Macs have the same exact problem in a row like that right.

  I took readers on the Macbook Pro, put them on sleds and threw them in my PowerMac, and both seemed fine, no problem, started well upward, ran utility disk on them, no problem, so I started to the checklist. Reset the PRAM. Nothing. SHIFT key at startup. Nothing. D at the start. Nothing. V order at startup. nothing. I wouldn't mind even their evisceration and making a portable useful with the parts of the two, but until I find out what the problem is, what can I do?

  If anyone has any suggestions, I would really appreciate it, I've supported every button I can think at the start, tried an inch USB key, boot and disk, this is the same Caryl bit both of the car, no chime, black screen, that's all.

  Thanks for your help.

  Damicon999 wrote:

  Is \Is possible for someone they have infected somehow, or possibly send me the malware that has infected my system?

  no chime, black screen, that's all.

  I don't think they are infected.

  The startup chime indicates that the Mac has made the initial diagnostic tests and there is no hardware problems or fundamental software.

  No edge in your case is a problem.  I think it's the luck of the draw to have 2 failures.

  In or out of warranty you can get for free a 'Apple Service Diagnostics' OTC test

  Genius of booking http://www.apple.com/retail/geniusbar/

  Online https://getsupport.apple.com/GetproductgroupList.action

  check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

• Satellite 1005: Push the power button, will turn off the AC power.

  Laptop: Toshiba Satellite 1005

  Problem: When I press the power button and let go, the laptop immediately loses all power.

  I use the power cord plugged into the laptop, the power supply light is green, but when I press the power button and let go, as soon as the power light goes black(turns off), nothing happens.

  Howerver, if I PRESS the power button without letting go, power LED lights, but the laptop won't boot at all, no Startup logo, no sound no matter what.

  It's the second time this has happened, the first time, I let stand overnight and the next day she booted up fine.

  Currently, the laptop is cold, it did not work, but always the same thing as described above.

  There are no changes made to the laptop.

  Any ideas?

  It seems that the contact, the power button is faulty. Better to elevate the laptop to a Toshiba service station for a check.

  I n ' t´t think that it is a software failure.

  Good bye

• Pavilion 23xi: my hp Pavilion keep showing the power button lock I tried all the solutions again, it won't work

  Hp power button held for a minute and the cord broke off electricity by holding down the power button and it's always the same problem in not falling is not on what can that I please

  The button lock feature works / stop is set by pressing the power button for 10 + seconds.  It is deactivated again by pressing the power button for 10 + seconds.   That's all there is to it.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• 15 170tu ac: I HAV to press the power button several times to start the laptop...

  I HAV to press the power button several times to start the laptop... works well with the power supply on.

  all My drivers & bios is updated... but when I opened the lid... I HAV poer press several times the button and he then began 4-5 min.

  Hi @Vishalwagh123,

  Welcome to HP's Forums a great way to get help. It's a great place to find answers and advice! Thanks for the post.

  I understand you have questions turn on/off the device and you must press the power button several times for him to start. I'll be happy to help you.

  Please try these steps first. Perform a hard reset.

  • Steps to do:
  • Turn off the computer and unplug the charger. Then remove the battery.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back. Try to turn on the computer.

  If it fires up immediately the issue is resolved. Otherwise, try to turn on the computer without the battery and check that it works immediately.

  In your message, you said that it works very well with the charger. However, I need more clarity here to help you better.

  It works immediately when the adapter is connected and the power button is pushed only once?

  If you again press the power button several times, it may be a faulty power button, and you will need to contact the hotline at the service of the unit.

  Let me know what happens when you try to turn on the unit without the charger?

  Visit this link to contact support phone:

  http://HP.care/2bjG4nE

  Hope the problem is solved without hassle. Please keep me in the loop.

  Take care and have a week Holy.

• Yoga2 11 -. Novo button power button / stop

  I recently replaced the hard drive in my Yoga2 with an SSD - it is not even formatted. The plan is to boot from a USB key that I have prepared as a means of recovery of Windows 8 - but first of all, I have to enter the BIOS to enable legacy-start.

  In the past, I've always been able to get into the BIOS by using the Novo button, but since I replaced the hard drive, the Novo button acts as a power button and gives me the message "no boot device found".

  How in the BIOS?

  Just press F2 (several times) at boot time.

• POWER BUTTON LOCKOUT

  My new HP Pavilion Elite (m9525f) desktop PC, quadcore and my new HP Monitor (w2338h) don't seem to work well together and just purchased April 18/09.   When I want to close my monitor, connected to my turn I push the high power button on my screen and it will not turn off and I get this message "hold on power button?   I'm operating Vista Home Premium(64 bit) entered previously connected.  I called HP support and said the first time to turn my turn and while holding down the power button on my screen, I also had to disconnect the power supply for a minute (while holding down the power button) and then plug my monitor back in and turn on my Tower.  It did not work.  Then they told me to go in my monitor options and click default settings to rest and it does not work. Then I was instructed to go into my device manager, display seetings and uninstall my Navidia 9300GE driver, then reboot my system and it would be re - install, but this does not work either.  Finally, it told me to do a restore of the entire system to the factory settings and guess what?  He has not yet healed my monitor power button problem.  Please help or let me know if there is a solution that I'll remember the HP Support and give them a piece of my mind.  Thank you.

  Hello.  I finally found a solution to my problem of a HP Tech named Dallas who is in the State of Oregon. The solution has been to hold down the power button on my monitor with power, for about 25-30 seconds and finally my monitor off. I can now turn off and then on my screen without any problems. Thanks to Dallas from HP.