Laptop HP COMPAQ power supply used on

Similar Questions

• Get an error "the AC power adapter type cannot be determined" lack of the power supply or laptop AC adapter/Power Supply / load disconnected

  * Original title: error when the Power AC Adapter (DA130PE1-100) is unable to connect to the DELL laptop

  Hello

  I use the operating system Windows 7 Home Premium 64 - bit with the i5-2450 M CPU @2.50 GHz. Intel processor recently passed 1 month, I noticed an error in the laptop lacks the power supply or laptop AC adapter/Power Supply / load disconnected

  Can you please let us know why the error is the filler and help us solve the problem.

  I have the DELL AC/DC adapter model number (DA130PE1-100) CN-0ju012-48661-22B-6WRV-A06

  

  Thank you

  Kalyan

  Kalyan,

  This could be hardware related.

  I suggest you to contact Dell Support and check if there is no hardware problem.

  Please update with the State.

• Using Powershell V3 to change the status of the power supply using WS-Management through iDRAC (PE r.620)

  Hi all

  I've been playing with WS-Management on the DRAC with PowerShell V3. I wanted to try to see if I could do the simple things. The task that I started has get and change of power on a PowerEdge r.620 State. I thought it would be fairly easy...

  Theres a lot written on this topic, but the examples from here

  http://en.community.Dell.com/TechCenter/systems-management/w/wiki/4374.how-to-build-and-execute-wsman-method-commands.aspx

  and here

  http://en.community.Dell.com/TechCenter/Extras/m/white_papers/20206146.aspx

  both use WinRM in their examples

  I find it quite difficult to understand how I would achieve the same results using WinRM, but using the new v3 PowerShell cmdlets (get-CimInstance, New-CimInstance, Set-CimIntance, Invoke-CimMethod, etc.)

  I'm ok, get the basic information from the DRAC using these commands, but I must admit that I am a little lost in how to manage things from the endpoint reference (EPR). Each example of WinRM speak back EPR, then using those of the WinRM method call, but I just can't see how to do this with the new PowerShell commands

  IM asking if someone did or has examples of how do?

  It would be great if the authors of these documents could provide examples in PowerShell v3

  Hello jaydee180

  This document contains examples for powershell v3:

  http://en.community.Dell.com/CFS-file.ashx/__key/CommunityServer-components-postattachments/00-20-18-70-55/Microsoft-Windows-PowerShell-CIM-cmdlets-with-Dell-iDRAC.PDF

  Thank you

• power supply used in use

  Dear Sir

  I don't know why my Laserjet M1217 display screen 'Used in use offer', could you please kindly tell me what happenning to my printer.

  Thank you very much.

  chung123, this error message indicates that the provision of toner he who is in the machine has been used previously. This message can carry to low/out toner or the toner has been charged.

  My recommendation is to replace the toner cartridge.

  I hope this helps!

• Help: A power supply using labview programming

  I recently saw entrust the task to our diet TDK Lambda with Labview programming work. It is IE to be able to set the voltage of 16V to 18V and adjust it back by 1 V every minute for an hour. No idea where to start, because I'm a bit lost?

  a bit of code to help you get started...

  

  of course, this reinforces the tension only and not launch into it...

• SAT L500D does not have to be connected to the power supply until the reboot

  Hi all

  I have a L500D, purchased locally and I have a problem that seems to escape correction by the helpdesk of Toshiba. My laptop while operating on battery comes with messages expected that the battery has x % remaining and suggests I plug the laptop into the power supply. I connect the laptop on the adapter and the power of the taskbar icon indicates the adapter is plugged in but it also shows that it does not load (adapter also remains cold, indicating no power is being developed). Low battery messages continue until the laptop stops ultimately. On commissioning again the laptop acknowledges that she attached to the adapter sector and charges upward.

  Helpdesk from Toshiba said a new BIOS version had been released and that I should update the BIOS and would probably "fix the problem". Went to the Australian Site and there is no other choice to see downloads for this model L500D [product number], helpdesk then took me on the European site where I updated the BIOS, then spent several hours on the phone with Symantec trying to uninstall and reinstall Norton 360, which ceased its activities and could not be uninstalled leaving my laptop not protected.

  Someone at - it an idea of what is the cause and how it might be remedied? Appreciate your thoughts.

  Hello

  If you have updated the BIOS and the help of t n right?
  Hmm I think that this problem of card mother s that looks like the adapter does not work correctly because everything is ok after new reboot
  I think the laptop is under warranty and you should get in touch with a local ASP to discover exactly what s wrong

  But I think that it s motherboard related question

• Control via RS232 interface labview DC power supply

  Hello world!

  I'm new to labview and I'm trying to control a DC power supply using a serial RS-232 (output voltage). I can't use an interface Gbspecifications TO have only a single module that is used for another task. Any advice on how to go about it in labview?

  Thank you very much!

  Find the driver for your device here: http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=510F94BB50256F51E0440003BA7CCD...

  It will work for GPIB or series with VISA.

• Power supply of database patch silence installtion

  Hello
  I have to apply database Jul 12419331 PSU on sub databases. I'm going with silent install (apply patch - silence) and need all steps in a script.
  
  Made Oracle gives a script automated for silent instaltion patch.
  
  Server:
  64 - bit sparcv9 kernel modules
  Have 2 databases
  
  Database:
  
  -Select database v$
  platform: Solaris [tm] OE (64-bit)
  -Select * from version $ v
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
  PL/SQL Release 11.2.0.2.0 - Production
  CORE Production 11.2.0.2.0
  AMT for Solaris: 11.2.0.2.0 - Production Version
  NLSRTL Version 11.2.0.2.0 - Production

  Salvation;

  You have the grid? If so, that you can follow the note below to automate

  Application Oracle Database power supply using procedures of deployment in MS [ID 864316.1]

  See also:
  http://blogs.Oracle.com/gridautomation/entry/revisiting_patch_management_-

  Respect of
  HELIOS

• Spectrum X 360 (N1W02PA #UUF): best practices for the use of the power supply battery for laptop (spectrum X 360)

  Hello.

  I know the best practice to use the power supply to charge the battery? I heard that keep charging your battery while using Notepad deteriorate autonomy. I don't know if that's true, but I do not charge my spectrum X 360 at 20% power level.

  Kindly need some expert advice. Thank you.

  Hello:

  My recommendation is to follow the instructions provided in this document from HP to address... paying particular attention to the info listed according to the recommended battery care practices.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c00596784

• adapter power supply for laptop DV6 1230us

  Anyone know what the output current should be for a DV6 1230us laptop power adapter?

  The original power supply has failed and has been eliminated - now, we tried two adapters purchased off ebay, and both overheated.  They were the two 60w and spec'd 3.5 released.  They were the two brands not HP.

  The specifications are not available on the HP Web site, and it seems that the good spare HP P/N 693711-001.

  We would like to undestand if power supply is incorrect and the origin of the problem, or if there is something wrong with the laptop (which continues to work very well...)

  It should be at least 65 Watts (18.5V x 3. 5), but you can use a 90w like this template:

  http://www.eBay.com/ITM/original-OEM-genuine-HP-Compaq-laptop-power-cord-adapter-608428-001-609940-001-/181304904317

  The models v and 19v 18.5 seem interchangeable, as long as it's the big gun with the centering on the inside PIN. An adapter low power will heat up.

• HP Compaq 8000 Elite power supply upgarde

  I have a HP Compaq 8000 Elite 2010 and you must update the power to launch my new Radeon HD 6850 graphics card. After much research I found that this particular computer motherboard does not have a normal diet of 20 or 24 pins but use instead of 2 separate connections from 4 pins for power supply PWR and PWRCPU and a third cable that seems to me to be an ancient and obsolete 6-pin auxiliary power (http://www.playtool.com/pages/psuconnectors/connectors.html#aux) for the PWRCMD supply Cable. I also found that all power is carried out through the motherboard for each piece of hardware in the computer and therefor, most likely has a limit for the maximum possible power supply. Y at - it sort of a power supply that will fit both into the slot in the power supply (which is not the standard size of power supply, but rather measures approximately 6 "x 5.75" x 3.75") and will also be able to connect to and sufficient power to the motherboard? Or am I stuck with an ugly 320W? Help, please!

  Service card: (http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01944841/c01944841.pdf)

  Similar cases: (http://h30434.www3.hp.com/t5/Desktop-Hardware/replacing-PSU-on-HP-COMPAQ-8000-ELITE-Convertible-Mini... )

  Maverickv2,

  You will not be able to upgrade this power supply, model # 508154-001. It is not possible with these connectors. The most absurd part is that the material (disks) are actually powered off the coast of the motherboard. (As you said).

• HP Pavilion G4 1310AU: problem with power supply for laptop HP Pavilion G4 1310AU

  Hi This is my first thread in the toms hardware, I have problem with my laptop power supply. my laptop cannot turn on if I remove the battery and use the charger only, but if I use my cell phone battery can turn on without problem for my laptop to use the battery to turn on and after my laptop that works and I remove the battery my still laptop running with the charger plugged, and that I charge my phone when my battery<80% capacity="" e.g="" on="" 40%="" battery="" power="" my="" laptop="" underclocked="" processor="" speed="" to="" 800="" mhz="" from="" 2.5="" ghz,="" i="" have="" changed="" power="" management="" in="" windows="" setting="" and="" amd="" catalyst="" to="" running="" full="" speed="" when="" plugged="" in="" and="" charging="" but="" my="" laptop="" still="" underclocked.="" i="" have="" updated="" my="" bios="" with="" latest="" version="" but="" still="" underclocked.="" after="" 100%="" fully="" charged="" my="" laptop="" processor="" running="" in="" full="" speed="" at="" 2,5="" ghz...="" other="" that="" no="" issue="" in="" my="" laptop,="" everything="" running="">

  I'm never use my laptop for 3D games, most of use for the office, watch video, listen to music and navigation

  My computer laptop specifications
  AMD A4 3305M 1.9 Ghz Turbo up to 2.5 Ghz (TDP 35watts) (Dual Core)
  2 GB OF DDR3 RAM
  HARD DRIVE 500 GB
  DVD RW
  Bluetooth
  14 "monitor

  What is my charger underpower for power to my laptop? my charger is genuine HP with 65 Watt (18, 5V and 3, 5)
  should I buy charger 90 watt (19V and 4.74)?
  or my default charger? so, my charger not Power not in 65 Watt as a specification written in but less than 65 watts running?

  Thank you

  Sorry for my bad English

  Hi @Dana88 ,

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  I understand that if you remove your battery, you can't boot up your laptop.  This is not unusual. some laptops are set up in this way.

  I understand that when you have the phone connected and charge the batteries of your performance is lowered.  There is more than one draw powere when it loads to the battery.

  Here is a link to the laptops HP - test and calibrate the battery (Windows 7) to ensure that there is no problem with the battery.

  Could also remove the battery once you put under tension.

  You asked questions on the use of a 90-Watt adapter.  Here is a link to HP G4 Notebook PC Maintenance and Service of Guide.  Chapter 3 page 32 lists not one that is recommended.

  Good luck!

• Satellite P100-347 does not stop when it is used on the power supply

  I have a new laptop of P100-347 games and I have 2 problems. Can anyone help?

  (1) when I use the usb port on the left side of the laptop, the laptop seems to restart the same time that I plug anything into it! I called Toshiba and said to update Bios, so I did (version 240 up to 330). But as soon as I did it started to the following problem:

  (2) when I run the laptop on battery, I can turn off the phone by pressing the power button or by clicking the windows locked. But as soon as I plug the power supply whenever I want to stop the laptop, the laptop just restarts. Does anyone have any ideas?

  Thanks for the comments!

• HP Compaq: Compaq replace power supply

  I need to replace the power supply on my computer

  Compaq dx2450 format microtour

  The current PLAN angioma is a Bestec ATX0300P5WC

  Please tell me an alternative

  Hello

  It uses 300W PSU, please use the following link for part #:

  http://PartSurfer.HP.com/search.aspx?SearchText=KA574UT

  You can try (for the first part):

  http://www.Amazon.com/HP-463317-001-power-supply-Watts/DP/B00DUG5L3C

  or second part:

  http://www.Amazon.com/463318-001-Hewlett-Packard-300Watt-power-supply/DP/B00HJKOK9G

  Kind regards.

• Improvement of the power supply for laptop

  The danger is that if the power supply cable is knocked out, the circuit board is broken.

  The connection of the laptop must be a cone. It could set magnetically or by using snaps.

  The laptop having a female cone and cord fitted with a male when cone struck with sufficient force should simply detach without damaging the laptop.

  Apple has already patented such a design and Microsoft use a variant of it for the shelf on the Surface.