Premium e-ALL-IN-ONE C310: Scan of the PC to the printer wireless

Similar Questions

• Installation printer HP Photosmart Premium e-All-In-One C310 series

  I'm product HP Photosmart Premium e-All-in-One C310 series printer with code produces CN503A and model #C310a. There are 564 HP, ink cartridges. everything was going well until I installed the ink that I bought and it said I had to install the ink supplied with the product; no ink came with it and I had to buy it.  Rep me chosen good staples ink and corresponding to all the symbols. IE installation to INSTALLATION provided with the printer ink cartridges, then close the ink access door to continue.  only problem is that I did not SETUP ink. I talked to HP rep and they said selling printers don't come with ink cartridges, I bought and installation.  any other ideas?

  The first series used in the C310a cartrdiges are cartridges special "setup."  You will need to Contact HP for a replacement.  After the initial installation, the replacement cartridges you have will work.

• Printer e-all-in-one C310 scan from computer, not of HP Photosmart Premium

  My printer won't let me not scan from the printer. It says Start scan of the computer one refer to the documentation for more details. I need help for each start of scanning the computer, or simply by changing it on the printer to start scanning of right to the printer again. Thank you.

  The settings must be enabled from the computer.  Try the procedure described here.  Let me know what happens.

• All-in-One C310: impossible to download the drivers and software for the e-all-in-one-c310 series since the update to windows 8.1

  Since I upgraded my OS from Windows 8 to 8.1 Windows I have not been able to print to my printer all in one c310 or have I been able to use the Solution Center software.  I tried to update the software and drivers from hp website, but when I click on the download button, nothing happens.  Any advice?

  Hello

  Download and install the software from the following link:

  http://ftp.HP.com/pub/softlib/software12/COL34215/MP-109761-2/PS_AIO_07_C310_FSW_Full_Win_WW_140_408-4.exe

  Please let me know if you encounter problems using this link as well.

  Shlomi

• HP photosmart premium e-all in one C310 series scanning issues

  Hello

  I have a hp photosmart e - all premium in one C310 series which I connected to my new computer windows 8.  The printer works but not the scanner and I can not get more information on how to operate? Can you please advise on how to get connected?  The installation of disc for drivers does not work.

  Thank you

  Hello

  Go here:
  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=es&CC=co&TaskID=135&prodTypeId=18972&prodSeriesId=4023238
  Select your printer and the fetch your drivers Windows 8.
  Those who will restore your missing feature to scan.
  Kind regards
  Carlos

• Photosmart C6188 all-in-one not scan on the mac with OS 10.6.1

  I just bought a new mac with snow leopard and incapable of having the C6188 HP photosmart all in one analysis images on mac.

  I made the mistake of installing the original software which is come with the printer, and then discovered that it does not get. So I uninstalled the software and performed an update to the Apple software.

  I tried according to your publications/announcement about the leopard snow, preferably using system preferences and applications of image capture.  I can print all right, but unable to scan images on mac.  I get the error message is ' year error occurred while communicating with the scanner.  It's the same message that I get from all three applications (preferably, preferences system and capture image).

  A big thank you to all who can help...

  I'm glad it's working for you now.  Multiple page in one file is a driver problem.  Sorry, you will need to wait for an update.

  In the meantime, it is very easy to combine pages in a file (pdf) with preview.

• My PSC 1210 all-in-one not Scan after the recent software update

  There is no if long software update asked me to install the last change of HP software. Which is curious, because when I look in the download, the last of them for OS10.6 section, which I run, was released in 2009.

  Before, I scanned successfully by using the Print & Fax system preferences.

  When I did it today, thogh, after choosing the option to Scan and then open Scanner, I would get the message that there is 'no scanner not selected', although HP psc 1200 series at the top of the screen. I tried scanning several times and got the same result every time.

  What can I do to get this working again?

  Hmmm, that seems strange that you will receive an update for a PSC 1210, because I do not think that there has been updates this software for years.

  Have you tried to uninstall the driver and then reinstall?

  You can find the instructions to uninstall here: http://support.hp.com/us-en/document/c02259020

  And then re-install the driver by clicking on: http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&docname=c02259020&lc=en&os=219&product=90764&sw_lang=

  Click on drivers & downloads and select your operating system (Mac OS X) from the drop-down list and click Next.  Expand the sign next to the driver - product Installation software (8) + and then download/install the driver for 10.6.

• ENVY5530 e-all-in-one:. Problem of the printer (ENVY5530 e-all-in-one) with a sweep

  I have a problem I scan a document to an email.  The States of "Server connection error" messages and "there was a problem connecting to the server.   There is no further explanation or any indication as to what to do to fix.   I have never had a problem with scanning and don't have an idea why this is happening and the system does not.   Have tried rebooting the computer, I get the same error message.   Any ideas?   Thank you.

  Hey @Laylac,

  I understand that you have problems with the help of e-mail scanning on your 5530 desire. I can help with that. To correct this:

  1. On the printer, click Web Services icon in the upper left corner of the screen. It looks like a tablet with a phone beside her.
  2. Click settings.
  3. Scroll and click on remove Web Services.
  4. Once back on the main screen, click the Web Services again.
  5. Click on accept.
  6. Click Yes.
  7. Try scanning to E-mail.

  If you use ePrint to the printer, then you will need to add the printer to your HP connected account. Once you have signed in, click on the devices tab, and then add a device.

  If you have any other questions please let me know. Even if this assistance then please let others know by clicking on accept as Solution below my post.

  I hope this helps and I hope you have a nice day!

• 8.1 win and J4680c all-in-one: impossible to reinstall the printer drivers.

  I followed all instructions for re - setup my wireless network, uninstall the printer drivers and reinstall printer drivers / (including all renamed to .old .dat files), but once it gets to the installation wizard, in the phase of control system, it tells me:

  C:\Users\Patricia\AppData\Local\Temp\7zS41F0\Setup\hpzshlaut...

  System cannot find the specified file.

  What is c? I can't spent to complete resettlement, so I can't use all the features other than printing printer! Can anyone help?

  Thank you!

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• I can scan from the printer wireless on my I Pad

  I have a printer of HP Deskjet 3050 a all-in-one wireless and I would like to scan on my I Pad 2?

  Hello

  You can scan from your iPad via the wireless network using the HP Printer Control application:

  https://iTunes.Apple.com/us/app/HP-printer-control/id469284907?Mt=8

  The application is available for download from the App Store, be sure to search iPhone apps as the application compatible with the iPad, but isn't an application native iPad.

  Shlomi

• Printer e-all-in-one c310

  I have a printer Photosmart premium e-all-in-one C310 series. I just bought a new laptop, HP15-p051. My current software for the printer does not work with Microsoft 8.1. What is the relationship of HP software update?

  Thank you

  Hello

  You can download the latest version of the software for your operating system from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109761-2&cc=us&DLC=en&LC=en&OS=4158&product=4231205&sw_lang=

  Kind regards

  Shlomi

• Jet office 6600 to work with all in one computer (scan)

  I have a hp officejet printer/scanner/fax/copy 6600 and I have just purchesed an all in one HP computer.  The printer software is not supported by Windows 8, and I can't get my scanner to scan to my computer.  Help, please!

  Ah ok. I just realized that you have not successfully updated Windows 8 software and drivers for this Office Jet. Download the full driver from here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=5304873#n197

  That should make it work just as you expect.

  I hope this helps.

• OfficeJet 6700 Premium e-all-in-one software limited scanning or it can be used via Photoshop?

  Hello...

  I use the HP Officejet 6700 Premium e-all-in-one Prod # CV078A on a Macintosh OS 10.6.8 macbook Pro (2.8 ghz Intel Core 2 Duo - 4 GB of DDR3 RAM).

  I try to run for the first time since that I recently bought this machine, and I'm running into some problems of quality. Digitization of works very well once I thought I had to use the utility software of HP scanning rather than access the scanner by Photoshop as I always had done before with my HP's Photosmart 2600 (I had for 5 years and more).

  The scanner HP scanning software (HP Scan v3.7.9 (59)) seems very limited.

  My questions are:

  • Is there a way to browse from Photoshop (or CS3, 4, 5 or 5.5) TWAIN instead of use the HP scanning software?

  • It is there no quality of analysis options other than a few easy turns, cultures and the very limited color correction, as well as certain preferences that allow adjustments to size/dpi of glass. What about scanning at larger percentages, Descreening and some more detailed agjustment image options?

  Thanks in advance.

  You are welcome

  As a general rule, the latest HP Scan 3 of the other less editing software options than previous versions of HP software.

  You can set the color settings by clicking the setting icon (). Cropping or rotating of the analysis can be done, but there is no option of resizing by the software.

  All image editing must be done with any photo editing software.

  Kind regards

  Shlomi

• The problems of security of the data during the recycling of a HP Photosmart Premium Fax all-in-One Printer - C309a?

  Given a document photocopied with a HP Photosmart Premium Fax all-in-one printer - C309a can be recovered later from the unit?

  I want to know if it is safe to recycle this unit, which was used to print, fax, scan, and copy documents that may have sensitive data. Some articles and videos on the net, it is clear that some photocopiers are vulnerable in this regard. I appreciate any assistance with this question - thanks!

  Hello

  Reset will erase everything. Please try: turn the power off, press and hold # and 6 while and for a few seconds after turning it on.

  Kind regards.

• Cannot copy from the surface of the glass. HP Photosmart Premium Fax all-in-One, model # C410a

  Hi people,

  I can't make a copy of the surface of the glass of the printer. Automatic advance works great, time to take the paper and print a copy. In the past, printing from glass was not a problem. The error message on the printer says "Document Feeder Jam. Reload document, then restart of work. " The problem is that there not be jammed. I raised the lid of the printer and checked the ink cartridges, checked the paper tray and open the access to the rear of the printer.  I have an HP Photosmart Premium Fax all-in-One, model # C410a. All accepted ideas. Right now, I'm ready to start with a hammer.

  Oops, I got typo in my link.  I have the fix above or you can click here.